Skip to content

L
linux
Switch branch/tag
  1. 02 Sep, 2010 2 commits
    • Anton Blanchard's avatar
      powerpc: Optimise 64bit csum_partial · 9b83ecb0
      Anton Blanchard authored 
      The main loop of csum_partial runs very slowly on recent POWER CPUs. After some
analysis on both POWER6 and POWER7 I came up with routine below. First we get
the source aligned to a double word, ignoring any odd alignment to keep things
simple. Then we do 64 bytes at a time, with an entry and exit limb of a further
64 bytes. On both POWER6 and POWER7 this should be as fast as we can go since
we are limited by the latency of the adde instructions.

To test this I forced checksumming on over loopback and ran socklib (a
simple TCP benchmark). On a POWER6 575 throughput improved by 11% with
this patch.
Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      9b83ecb0
    • Nathan Fontenot's avatar
      powerpc/pseries: Correct rtas_data_buf locking in dlpar code · 93f68f1e
      Nathan Fontenot authored 
      The dlpar code can cause a deadlock to occur when making the RTAS
configure-connector call.  This occurs because we make kmalloc calls,
which can block, while parsing the rtas_data_buf and holding the
rtas_data_buf_lock.  This an cause issues if someone else attempts
to grab the rtas_data_bug_lock.

This patch alleviates this issue by copying the contents of the rtas_data_buf
to a local buffer before parsing.  This allows us to only hold the
rtas_data_buf_lock around the RTAS configure-connector calls.
Signed-off-by: default avatarNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      93f68f1e
  3. 31 Aug, 2010 9 commits
    • Anton Vorontsov's avatar
      powerpc/85xx: Add P1021 PCI IDs and quirks · a28dec2f
      Anton Vorontsov authored 
      This is needed for proper PCI-E support on P1021 SoCs.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@mvista.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      a28dec2f
    • Julia Lawall's avatar
      arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leak · 5aac4d73
      Julia Lawall authored 
      Add a call to of_node_put in the error handling code following a call to
of_find_compatible_node.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E,E1;
statement S;
@@

*x =
(of_find_node_by_path
|of_find_node_by_name
|of_find_node_by_phandle
|of_get_parent
|of_get_next_parent
|of_get_next_child
|of_find_compatible_node
|of_match_node
)(...);
...
if (x == NULL) S
<... when != x = E
*if (...) {
  ... when != of_node_put(x)
      when != if (...) { ... of_node_put(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
...>
of_node_put(x);
// </smpl>
Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
Acked-by: default avatarTimur Tabi <timur@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      5aac4d73
    • Julia Lawall's avatar
      arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmap · fa9fc821
      Julia Lawall authored 
      The function of_iomap returns the result of calling ioremap, so iounmap
should be called on the result in the error handling code, as done in the
normal exit of the function.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E,E1;
identifier l;
statement S;
@@

*x = of_iomap(...);
...  when != iounmap(x)
     when != if (...) { ... iounmap(x); ... }
     when != E = x
     when any
(
if (x == NULL) S
|
if (...) {
  ... when != iounmap(x)
      when != if (...) { ... iounmap(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
)
... when != x = E1
    when any
iounmap(x);
// </smpl>
Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      fa9fc821
    • Li Yang's avatar
      fsl_rio: fix compile errors · ff33f182
      Li Yang authored 
      Fixes the following compile problem on E500 platforms:
arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception':
arch/powerpc/sysdev/fsl_rio.c:248: error: 'MCSR_MASK' undeclared (first use in this function)

Also fixes the compile problem on non-E500 platforms.
Signed-off-by: default avatarLi Yang <leoli@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      ff33f182
    • Kumar Gala's avatar
      powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblock · dc1c41f4
      Kumar Gala authored 
      arch/powerpc/platforms/85xx/p1022_ds.c:22:23: error: linux/lmb.h: No such file or directory
arch/powerpc/platforms/85xx/p1022_ds.c: In function 'p1022_ds_setup_arch':
arch/powerpc/platforms/85xx/p1022_ds.c:100: error: implicit declaration of function 'memblock_end_of_DRAM'
arch/powerpc/platforms/85xx/p1022_ds.c: At top level:
arch/powerpc/platforms/85xx/p1022_ds.c:147: error: 'udbg_progress' undeclared here (not in a function)
make[2]: *** [arch/powerpc/platforms/85xx/p1022_ds.o] Error 1
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      dc1c41f4
    • Alexander Graf's avatar
      powerpc/85xx: Fix compilation of mpc85xx_mds.c · 6d4f2fb0
      Alexander Graf authored 
      Commit 99d8238f berobbed the for_each loop of its iterator! Let's be
nice and give it back, so it compiles for us.

CC: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: default avatarAlexander Graf <agraf@suse.de>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
      6d4f2fb0
    • Michael Neuling's avatar
      powerpc: Don't use kernel stack with translation off · 54a83404
      Michael Neuling authored 
      In f761622e we changed
early_setup_secondary so it's called using the proper kernel stack
rather than the emergency one.

Unfortunately, this stack pointer can't be used when translation is off
on PHYP as this stack pointer might be outside the RMO.  This results in
the following on all non zero cpus:
  cpu 0x1: Vector: 300 (Data Access) at [c00000001639fd10]
      pc: 000000000001c50c
      lr: 000000000000821c
      sp: c00000001639ff90
     msr: 8000000000001000
     dar: c00000001639ffa0
   dsisr: 42000000
    current = 0xc000000016393540
    paca    = 0xc000000006e00200
      pid   = 0, comm = swapper

The original patch was only tested on bare metal system, so it never
caught this problem.

This changes __secondary_start so that we calculate the new stack
pointer but only start using it after we've called early_setup_secondary.

With this patch, the above problem goes away.
Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      54a83404
    • Paul Mackerras's avatar
      powerpc/perf_event: Reduce latency of calling perf_event_do_pending · b0d278b7
      Paul Mackerras authored 
      Commit 0fe1ac48 ("powerpc/perf_event: Fix oops due to
perf_event_do_pending call") moved the call to perf_event_do_pending
in timer_interrupt() down so that it was after the irq_enter() call.
Unfortunately this moved it after the code that checks whether it
is time for the next decrementer clock event.  The result is that
the call to perf_event_do_pending() won't happen until the next
decrementer clock event is due.  This was pointed out by Milton
Miller.

This fixes it by moving the check for whether it's time for the
next decrementer clock event down to the point where we're about
to call the event handler, after we've called perf_event_do_pending.

This has the side effect that on old pre-Core99 Powermacs where we
use the ppc_n_lost_interrupts mechanism to replay interrupts, a
replayed interrupt will incur a little more latency since it will
now do the code from the irq_enter down to the irq_exit, that it
used to skip.  However, these machines are now old and rare enough
that this doesn't matter.  To make it clear that ppc_n_lost_interrupts
is only used on Powermacs, and to speed up the code slightly on
non-Powermac ppc32 machines, the code that tests ppc_n_lost_interrupts
is now conditional on CONFIG_PMAC as well as CONFIG_PPC32.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Cc: stable@kernel.org
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b0d278b7
    • Matthew McClintock's avatar
      powerpc/kexec: Adds correct calling convention for kexec purgatory · 4562c986
      Matthew McClintock authored 
      Call kexec purgatory code correctly. We were getting lucky before.
If you examine the powerpc 32bit kexec "purgatory" code you will
see it expects the following:

>From kexec-tools: purgatory/arch/ppc/v2wrap_32.S
-> calling convention:
->   r3 = physical number of this cpu (all cpus)
->   r4 = address of this chunk (master only)

As such, we need to set r3 to the current core, r4 happens to be
unused by purgatory at the moment but we go ahead and set it
here as well
Signed-off-by: default avatarMatthew McClintock <msm@freescale.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      4562c986
  5. 29 Aug, 2010 3 commits
  7. 28 Aug, 2010 26 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7