[ Upstream commit e91793bb ]

The Rx path may grab the socket right before pppol2tp_release(), but
nothing guarantees that it will enqueue packets before
skb_queue_purge(). Therefore, the socket can be destroyed without its
queues fully purged.

Fix this by purging queues in pppol2tp_session_destruct() where we're
guaranteed nothing is still referencing the socket.

Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 49d52e81 ]

If the PHY is halted on stop, then do not set the state to PHY_UP.  This
ensures the phy will be restarted later in phy_start when the machine is
started again.

Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.")
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Acked-by: Xander Huff <xander.huff@ni.com>
Acked-by: Kyle Roeschley <kyle.roeschley@ni.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 48481c8f ]

Dmitry posted a nice reproducer of a bug triggering in neigh_probe()
when dereferencing a NULL neigh->ops->solicit method.

This can happen for arp_direct_ops/ndisc_direct_ops and similar,
which can be used for NUD_NOARP neighbours (created when dev->header_ops
is NULL). Admin can then force changing nud_state to some other state
that would fire neigh timer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9ae34dbd ]

This commit moves sparc64's prototype of pmd_write() outside
of the CONFIG_TRANSPARENT_HUGEPAGE ifdef.

In 2013, commit a7b9403f ("sparc64: Encode huge PMDs using PTE
encoding.") exposed a path where pmd_write() could be called without
CONFIG_TRANSPARENT_HUGEPAGE defined.  This can result in the panic below.

The diff is awkward to read, but the changes are straightforward.
pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE.
Also, __HAVE_ARCH_PMD_WRITE was defined.

kernel BUG at include/asm-generic/pgtable.h:576!
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1]
CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted
4.1.12-61.7.1.el6uek.rc1.sparc64 #1
task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000
TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y:
00000005    Not tainted
TPC: <gup_huge_pmd+0x198/0x1e0>
g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001
g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720
o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00
o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0
RPC: <gup_huge_pmd+0x190/0x1e0>
l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000
l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000
i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000
i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0
I7: <gup_pud_range+0x170/0x1a0>
Call Trace:
 [0000000000460dd0] gup_pud_range+0x170/0x1a0
 [0000000000460e84] get_user_pages_fast+0x84/0x120
 [00000000006f5a18] iov_iter_get_pages+0x98/0x240
 [00000000005fa744] do_direct_IO+0xf64/0x1e00
 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0
 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4]
 [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4]
 [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4]
 [0000000000553bd4] generic_file_read_iter+0x114/0x140
 [00000000005bdc2c] __vfs_read+0xac/0x100
 [00000000005bf254] vfs_read+0x54/0x100
 [00000000005bf368] SyS_pread64+0x68/0x80
Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit adfae8a5 ]

I encountered this bug when using /proc/kcore to examine the kernel. Plus a
coworker inquired about debugging tools. We computed pa but did
not use it during the maximum physical address bits test. Instead we used
the identity mapped virtual address which will always fail this test.

I believe the defect came in here:
[bpicco@zareason linus.git]$ git describe --contains bb4e6e85
v3.18-rc1~87^2~4
.
Signed-off-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c06b6d70 ]

On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.

Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 03d27ade ]

buflen by default (256) is smaller than wMaxPacketSize (512) in high-speed
devices.

That caused the OUT endpoint to freeze if the host send any data packet of
length greater than 256 bytes.

This is an example dump of what happended on that enpoint:
HOST:   [DATA][Length=260][...]
DEVICE: [NAK]
HOST:   [PING]
DEVICE: [NAK]
HOST:   [PING]
DEVICE: [NAK]
...
HOST:   [PING]
DEVICE: [NAK]

This patch fixes this problem by setting the minimum usb_request's buffer size
for the OUT endpoint as its wMaxPacketSize.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit e47db94e ]

Two different threads with different rds sockets may be in
rds_recv_rcvbuf_delta() via receive path. If their ports
both map to the same word in the congestion map, then
using non-atomic ops to update it could cause the map to
be incorrect. Lets use atomics to avoid such an issue.

Full credit to Wengang <wen.gang.wang@oracle.com> for
finding the issue, analysing it and also pointing out
to offending code with spin lock based fix.
Reviewed-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c80e1b62 ]

As part of handling a crash on an SMP system, an IPI is send to
all other CPUs to save their current registers and stop.  It was
using task_pt_regs(current) to get the registers, but that will
only be accurate if the CPU was interrupted running in userland.
Instead allow the architecture to pass in the registers (all
pass NULL now, but allow for the future) and then use get_irq_regs()
which should be accurate as we are in an interrupt.  Fall back to
task_pt_regs(current) if nothing else is available.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13050/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 816b0acf ]

If first_bad == this_sector when we get the WriteMostly disk
in read_balance(), valid disk will be returned with zero
max_sectors. It'll lead to a dead loop in make_request(), and
OOM will happen because of endless allocation of struct bio.

Since we can't get data from this disk in this case, so
continue for another disk.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit abfa7f43 ]

__test_aead() reads MAX_IVLEN bytes from template[i].iv, but the
actual length of the initialisation vector can be shorter.
The length of the IV is already calculated earlier in the
function. Let's just reuses that. Also the IV length is currently
calculated several time for no reason. Let's fix that too.
This fix an out-of-bound error detected by KASan.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 210bd104 ]

We have to unlock before returning -ENOMEM.

Fixes: 8dfbcc43 ('[media] xc2028: avoid use after free')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9a59b62f ]

Do more sanity check for superblock during ->mount.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 43a66845 ]

We got a report of yet another bug in ping

http://www.openwall.com/lists/oss-security/2017/03/24/6

->disconnect() is not called with socket lock held.

Fix this by acquiring ping rwlock earlier.

Thanks to Daniel, Alexander and Andrey for letting us know this problem.

Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Daniel Jiang <danieljiang0415@gmail.com>
Reported-by: Solar Designer <solar@openwall.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9590232b ]

There is a use-after-free problem in the ion driver.
This is caused by a race condition in the ion_ioctl()
function.

A handle has ref count of 1 and two tasks on different
cpus calls ION_IOC_FREE simultaneously.

cpu 0                                   cpu 1
-------------------------------------------------------
ion_handle_get_by_id()
(ref == 2)
                            ion_handle_get_by_id()
                            (ref == 3)

ion_free()
(ref == 2)

ion_handle_put()
(ref == 1)

                            ion_free()
                            (ref == 0 so ion_handle_destroy() is
                            called
                            and the handle is freed.)

                            ion_handle_put() is called and it
                            decreases the slub's next free pointer

The problem is detected as an unaligned access in the
spin lock functions since it uses load exclusive
 instruction. In some cases it corrupts the slub's
free pointer which causes a mis-aligned access to the
next free pointer.(kmalloc returns a pointer like
ffffc0745b4580aa). And it causes lots of other
hard-to-debug problems.

This symptom is caused since the first member in the
ion_handle structure is the reference count and the
ion driver decrements the reference after it has been
freed.

To fix this problem client->lock mutex is extended
to protect all the codes that uses the handle.
Signed-off-by: Eun Taik Lee <eun.taik.lee@samsung.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 05692d70 ]

The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize
user-supplied integers, potentially allowing memory corruption. This
patch adds appropriate integer overflow checks, checks the range bounds
for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element
in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set.
VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in
vfio_pci_set_irqs_ioctl().

Furthermore, a kzalloc is changed to a kcalloc because the use of a
kzalloc with an integer multiplication allowed an integer overflow
condition to be reached without this patch. kcalloc checks for overflow
and should prevent a similar occurrence.
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 8dfbcc43 ]

If struct xc2028_config is passed without a firmware name,
the following trouble may happen:

[11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner
[11009.907491] ==================================================================
[11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40
[11009.907992] Read of size 1 by task modprobe/28992
[11009.907994] =============================================================================
[11009.907997] BUG kmalloc-16 (Tainted: G        W      ): kasan: bad access detected
[11009.907999] -----------------------------------------------------------------------------

[11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992
[11009.908012] 	___slab_alloc+0x581/0x5b0
[11009.908014] 	__slab_alloc+0x51/0x90
[11009.908017] 	__kmalloc+0x27b/0x350
[11009.908022] 	xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd]
[11009.908026] 	usb_hcd_submit_urb+0x1e8/0x1c60
[11009.908029] 	usb_submit_urb+0xb0e/0x1200
[11009.908032] 	usb_serial_generic_write_start+0xb6/0x4c0
[11009.908035] 	usb_serial_generic_write+0x92/0xc0
[11009.908039] 	usb_console_write+0x38a/0x560
[11009.908045] 	call_console_drivers.constprop.14+0x1ee/0x2c0
[11009.908051] 	console_unlock+0x40d/0x900
[11009.908056] 	vprintk_emit+0x4b4/0x830
[11009.908061] 	vprintk_default+0x1f/0x30
[11009.908064] 	printk+0x99/0xb5
[11009.908067] 	kasan_report_error+0x10a/0x550
[11009.908070] 	__asan_report_load1_noabort+0x43/0x50
[11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992
[11009.908077] 	__slab_free+0x2ec/0x460
[11009.908080] 	kfree+0x266/0x280
[11009.908083] 	xc2028_set_config+0x90/0x630 [tuner_xc2028]
[11009.908086] 	xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908090] 	em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908094] 	em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908098] 	em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908101] 	em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908105] 	em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908108] 	do_one_initcall+0x141/0x300
[11009.908111] 	do_init_module+0x1d0/0x5ad
[11009.908114] 	load_module+0x6666/0x9ba0
[11009.908117] 	SyS_finit_module+0x108/0x130
[11009.908120] 	entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x          (null) flags=0x2ffff8000004080
[11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001

[11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00  ....*....(......
[11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff  ...........j....
[11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G    B   W       4.5.0-rc1+ #43
[11009.908140] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[11009.908142]  ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80
[11009.908148]  ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280
[11009.908153]  ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4
[11009.908158] Call Trace:
[11009.908162]  [<ffffffff81932007>] dump_stack+0x4b/0x64
[11009.908165]  [<ffffffff81556759>] print_trailer+0xf9/0x150
[11009.908168]  [<ffffffff8155ccb4>] object_err+0x34/0x40
[11009.908171]  [<ffffffff8155f260>] kasan_report_error+0x230/0x550
[11009.908175]  [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908179]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908182]  [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50
[11009.908185]  [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0
[11009.908189]  [<ffffffff8194cea6>] ? strcmp+0x96/0xb0
[11009.908192]  [<ffffffff8194cea6>] strcmp+0x96/0xb0
[11009.908196]  [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028]
[11009.908200]  [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028]
[11009.908203]  [<ffffffff8155ea78>] ? memset+0x28/0x30
[11009.908206]  [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028]
[11009.908211]  [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb]
[11009.908215]  [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb]
[11009.908219]  [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb]
[11009.908222]  [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x]
[11009.908226]  [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x]
[11009.908230]  [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10
[11009.908233]  [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80
[11009.908238]  [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb]
[11009.908242]  [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb]
[11009.908245]  [<ffffffff8195222d>] ? string+0x14d/0x1f0
[11009.908249]  [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0
[11009.908253]  [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0
[11009.908257]  [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908260]  [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0
[11009.908264]  [<ffffffff812e9846>] ? __module_address+0xb6/0x360
[11009.908268]  [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0
[11009.908271]  [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0
[11009.908275]  [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290
[11009.908278]  [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300
[11009.908282]  [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908285]  [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290
[11009.908289]  [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908292]  [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10
[11009.908296]  [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx]
[11009.908299]  [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400
[11009.908302]  [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300
[11009.908306]  [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20
[11009.908309]  [<ffffffff8159e708>] ? put_object+0x48/0x70
[11009.908314]  [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb]
[11009.908317]  [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx]
[11009.908320]  [<ffffffffa0150000>] ? 0xffffffffa0150000
[11009.908324]  [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb]
[11009.908327]  [<ffffffff810021b1>] do_one_initcall+0x141/0x300
[11009.908330]  [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40
[11009.908333]  [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590
[11009.908337]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908340]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908343]  [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50
[11009.908346]  [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0
[11009.908350]  [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad
[11009.908353]  [<ffffffff812f2626>] load_module+0x6666/0x9ba0
[11009.908356]  [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50
[11009.908361]  [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb]
[11009.908366]  [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20
[11009.908369]  [<ffffffff815bc940>] ? open_exec+0x50/0x50
[11009.908374]  [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0
[11009.908377]  [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130
[11009.908379]  [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0
[11009.908383]  [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14
[11009.908394]  [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76
[11009.908396] Memory state around the buggy address:
[11009.908398]  ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908401]  ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc
[11009.908405]                                            ^
[11009.908407]  ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908409]  ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[11009.908411] ==================================================================

In order to avoid it, let's set the cached value of the firmware
name to NULL after freeing it. While here, return an error if
the memory allocation fails.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d2f394dc ]

In a dual bearer configuration, if the second tipc link becomes
active while the first link still has pending nametable "bulk"
updates, it randomly leads to reset of the second link.

When a link is established, the function named_distribute(),
fills the skb based on node mtu (allows room for TUNNEL_PROTOCOL)
with NAME_DISTRIBUTOR message for each PUBLICATION.
However, the function named_distribute() allocates the buffer by
increasing the node mtu by INT_H_SIZE (to insert NAME_DISTRIBUTOR).
This consumes the space allocated for TUNNEL_PROTOCOL.

When establishing the second link, the link shall tunnel all the
messages in the first link queue including the "bulk" update.
As size of the NAME_DISTRIBUTOR messages while tunnelling, exceeds
the link mtu the transmission fails (-EMSGSIZE).

Thus, the synch point based on the message count of the tunnel
packets is never reached leading to link timeout.

In this commit, we adjust the size of name distributor message so that
they can be tunnelled.
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 67893f12 ]

We get a bogus warning about a potential uninitialized variable
use in gfs2, because the compiler does not figure out that we
never use the leaf number if get_leaf_nr() returns an error:

fs/gfs2/dir.c: In function 'get_first_leaf':
fs/gfs2/dir.c:802:9: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/gfs2/dir.c: In function 'dir_split_leaf':
fs/gfs2/dir.c:1021:8: warning: 'leaf_no' may be used uninitialized in this function [-Wmaybe-uninitialized]

Changing the 'if (!error)' to 'if (!IS_ERR_VALUE(error))' is
sufficient to let gcc understand that this is exactly the same
condition as in IS_ERR() so it can optimize the code path enough
to understand it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 48dc5fb3 ]

The driver reads a value from hfa384x_from_bap(), which may fail,
and then assigns the value to a local variable. gcc detects that
in in the failure case, the 'rlen' variable now contains
uninitialized data:

In file included from ../drivers/net/wireless/intersil/hostap/hostap_pci.c:220:0:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function 'hfa384x_get_rid':
drivers/net/wireless/intersil/hostap/hostap_hw.c:842:5: warning: 'rec' may be used uninitialized in this function [-Wmaybe-uninitialized]
  if (le16_to_cpu(rec.len) == 0) {

This restructures the function as suggested by Russell King, to
make it more readable and get more reliable error handling, by
handling each failure mode using a goto.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit a4f642a8 ]

The nozomi wireless data driver has its own helper function to
transfer data from a FIFO, doing an extra byte swap on big-endian
architectures, presumably to bring the data back into byte-serial
order after readw() or readl() perform their implicit byteswap.

This helper function is used in the receive_data() function to
first read the length into a 32-bit variable, which causes
a compile-time warning:

drivers/tty/nozomi.c: In function 'receive_data':
drivers/tty/nozomi.c:857:9: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized]

The problem is that gcc is unsure whether the data was actually
read or not. We know that it is at this point, so we can replace
it with a single readl() to shut up that warning.

I am leaving the byteswap in there, to preserve the existing
behavior, even though this seems fishy: Reading the length of
the data into a cpu-endian variable should normally not use
a second byteswap on big-endian systems, unless the hardware
is aware of the CPU endianess.

There appears to be a lot more confusion about endianess in this
driver, so it probably has not worked on big-endian systems in
a long time, if ever, and I have no way to test it. It's well
possible that this driver has not been used by anyone in a while,
the last patch that looks like it was tested on the hardware is
from 2008.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 7c8bcfb1 ]

In the refactoring commit d570d864 ("tipc: enqueue arrived buffers
in socket in separate function") we did by accident replace the test

if (sk->sk_backlog.len == 0)
     atomic_set(&tsk->dupl_rcvcnt, 0);

with

if (sk->sk_backlog.len)
     atomic_set(&tsk->dupl_rcvcnt, 0);

This effectively disables the compensation we have for the double
receive buffer accounting that occurs temporarily when buffers are
moved from the backlog to the socket receive queue. Until now, this
has gone unnoticed because of the large receive buffer limits we are
applying, but becomes indispensable when we reduce this buffer limit
later in this series.

We now fix this by inverting the mentioned condition.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit ac34f15e ]

When tearing down a block device early in its lifetime, userspace may
still be performing discovery actions like blkdev_ioctl() to re-read
partitions.

The nvdimm_revalidate_disk() implementation depends on
disk->driverfs_dev to be valid at entry.  However, it is set to NULL in
del_gendisk() and fatally this is happening *before* the disk device is
deleted from userspace view.

There's no reason for del_gendisk() to clear ->driverfs_dev.  That
device is the parent of the disk.  It is guaranteed to not be freed
until the disk, as a child, drops its ->parent reference.

We could also fix this issue locally in nvdimm_revalidate_disk() by
using disk_to_dev(disk)->parent, but lets fix it globally since
->driverfs_dev follows the lifetime of the parent.  Longer term we
should probably just add a @parent parameter to add_disk(), and stop
carrying this pointer in the gendisk.

 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffffa00340a8>] nvdimm_revalidate_disk+0x18/0x90 [libnvdimm]
 CPU: 2 PID: 538 Comm: systemd-udevd Tainted: G           O    4.4.0-rc5 #2257
 [..]
 Call Trace:
  [<ffffffff8143e5c7>] rescan_partitions+0x87/0x2c0
  [<ffffffff810f37f9>] ? __lock_is_held+0x49/0x70
  [<ffffffff81438c62>] __blkdev_reread_part+0x72/0xb0
  [<ffffffff81438cc5>] blkdev_reread_part+0x25/0x40
  [<ffffffff8143982d>] blkdev_ioctl+0x4fd/0x9c0
  [<ffffffff811246c9>] ? current_kernel_time64+0x69/0xd0
  [<ffffffff812916dd>] block_ioctl+0x3d/0x50
  [<ffffffff81264c38>] do_vfs_ioctl+0x308/0x560
  [<ffffffff8115dbd1>] ? __audit_syscall_entry+0xb1/0x100
  [<ffffffff810031d6>] ? do_audit_syscall_entry+0x66/0x70
  [<ffffffff81264f09>] SyS_ioctl+0x79/0x90
  [<ffffffff81902672>] entry_SYSCALL_64_fastpath+0x12/0x76
Reported-by: Robert Hu <robert.hu@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit cb7a5724 ]

I'm observing the following hot add requests from the WS2012 host:

hot_add_req: start_pfn = 0x108200 count = 330752
hot_add_req: start_pfn = 0x158e00 count = 193536
hot_add_req: start_pfn = 0x188400 count = 239616

As the host doesn't specify hot add regions we're trying to create
128Mb-aligned region covering the first request, we create the 0x108000 -
0x160000 region and we add 0x108000 - 0x158e00 memory. The second request
passes the pfn_covered() check, we enlarge the region to 0x108000 -
0x190000 and add 0x158e00 - 0x188200 memory. The problem emerges with the
third request as it starts at 0x188400 so there is a 0x200 gap which is
not covered. As the end of our region is 0x190000 now it again passes the
pfn_covered() check were we just adjust the covered_end_pfn and make it
0x188400 instead of 0x188200 which means that we'll try to online
0x188200-0x188400 pages but these pages were never assigned to us and we
crash.

We can't react to such requests by creating new hot add regions as it may
happen that the whole suggested range falls into the previously identified
128Mb-aligned area so we'll end up adding nothing or create intersecting
regions and our current logic doesn't allow that. Instead, create a list of
such 'gaps' and check for them in the page online callback.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 7cf3b79e ]

Windows 2012 (non-R2) does not specify hot add region in hot add requests
and the logic in hot_add_req() is trying to find a 128Mb-aligned region
covering the request. It may also happen that host's requests are not 128Mb
aligned and the created ha_region will start before the first specified
PFN. We can't online these non-present pages but we don't remember the real
start of the region.

This is a regression introduced by the commit 5abbbb75 ("Drivers: hv:
hv_balloon: don't lose memory when onlining order is not natural"). While
the idea of keeping the 'moving window' was wrong (as there is no guarantee
that hot add requests come ordered) we should still keep track of
covered_start_pfn. This is not a revert, the logic is different.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 29f72ce3 ]

MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.

Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.

Tested on AMD Fam15h and Fam17h systems.

  WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
  kobject: (ffff88085bb256c0): attempted to be registered with empty name!
  ...
  Call Trace:
   kobject_add_internal
   kobject_add
   kobject_create_and_add
   threshold_create_device
   threshold_init_device
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 8de0d7e9 ]

The current delay between retries is unnecessarily high and is negatively
affecting the time it takes to boot the system.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 7cc80c98 ]

In some cases create_gpadl_header() allocates submessages but we never
free them.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c2ed1880 ]

The protocol field is checked when deleting IPv4 routes, but ignored for
IPv6, which causes problems with routing daemons accidentally deleting
externally set routes (observed by multiple bird6 users).

This can be verified using `ip -6 route del <prefix> proto something`.
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit b389f173 ]

When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.

Before commit 0058f087 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.

But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.

This bug was not triggered before commit 0058f087
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.

Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.

Cc: stable@vger.kernel.org
Reported-by: Gil Weber <webergil@gmail.com>
Fixes: 0058f087Tested-by: Gil Weber <webergil@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 2d6a0e9d ]

Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d4114914 ]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 7926aff5 ]

Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 5593523f ]

Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
References: https://bugs.debian.org/852556Reported-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
Tested-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c4baad50 ]

put_chars() stuffs the buffer it gets into an sg, but that buffer may be
on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it
manifested as printks getting turned into NUL bytes).
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit a4866aa8 ]

Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
disallowed. However, on x86, the first 1MB was always allowed for BIOS
and similar things, regardless of it actually being System RAM. It was
possible for heap to end up getting allocated in low 1MB RAM, and then
read by things like x86info or dd, which would trip hardened usercopy:

usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes)

This changes the x86 exception for the low 1MB by reading back zeros for
System RAM areas instead of blindly allowing them. More work is needed to
extend this to mmap, but currently mmap doesn't go through usercopy, so
hardened usercopy won't Oops the kernel.
Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 5fa40869 ]

Accessing the registers of the RTC block on Tegra requires the module
clock to be enabled. This only works because the RTC module clock will
be enabled by default during early boot. However, because the clock is
unused, the CCF will disable it at late_init time. This causes the RTC
to become unusable afterwards. This can easily be reproduced by trying
to use the RTC:

	$ hwclock --rtc /dev/rtc1

This will hang the system. I ran into this by following up on a report
by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It
turns out that the rtc-tegra driver's ->shutdown() implementation will
hang the CPU, because of the disabled clock, before the system can be
rebooted.

What confused me for a while is that the same driver is used on prior
Tegra generations where the hang can not be observed. However, as Peter
De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC
clock is enabled by the tegra20_timer.c clocksource driver, which uses
the RTC to provide a persistent clock. This code is never enabled on
64-bit Tegra because the persistent clock infrastructure does not exist
on 64-bit ARM.

The proper fix for this is to add proper clock handling to the RTC
driver in order to ensure that the clock is enabled when the driver
requires it. All device trees contain the clock already, therefore
no additional changes are required.
Reported-by: Martin Michlmayr <tbm@cyrius.com>
Acked-By Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 98d610c3 ]

The accelerometer event relies on the ACERWMID_EVENT_GUID notify.
So, this patch changes the codes to setup accelerometer input device
when detected ACERWMID_EVENT_GUID. It avoids that the accel input
device created on every Acer machines.

In addition, patch adds a clearly parsing logic of accelerometer hid
to acer_wmi_get_handle_cb callback function. It is positive matching
the "SENR" name with "BST0001" device to avoid non-supported hardware.
Reported-by: Bjørn Mork <bjorn@mork.no>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
[andy: slightly massage commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 00514537 ]

I ran into a stack frame size warning because of the on-stack copy of
the USB device structure:

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect':
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Copying a device structure like this is wrong for a number of other reasons
too aside from the possible stack overflow. One of them is that the
dev_info() call will print the name of the device later, but AFAICT
we have only copied a pointer to the name earlier and the actual name
has been freed by the time it gets printed.

This removes the on-stack copy of the device and instead copies the
device name using kstrdup(). I'm ignoring the possible failure here
as both printk() and kfree() are able to deal with NULL pointers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 06ce521a ]

handle_vmon gets a reference on VMXON region page,
but does not release it. Release the reference.

Found by syzkaller; based on a patch by Dmitry.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>