- 27 Jul, 2016 40 commits
-
-
Martin KaFai Lau authored
[ Upstream commit 903ce4ab ] It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a1 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Fixes: 9c7370a1 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by:
Petr Novopashenniy <pety@rusnet.ru> Tested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
[ Upstream commit c086e709 ] Several Lenovo users have reported problems with their Sierra Wireless EM7455 modem. The driver has loaded successfully and the MBIM management channel has appeared to work, including establishing a connection to the mobile network. But no frames have been received over the data interface. The problem affects all EM7455 and MC7455, and is assumed to affect other modems based on the same Qualcomm chipset and baseband firmware. Testing narrowed the problem down to what seems to be a firmware timing bug during initialization. Adding a short sleep while probing is sufficient to make the problem disappear. Experiments have shown that 1-2 ms is too little to have any effect, while 10-20 ms is enough to reliably succeed. Reported-by:
Stefan Armbruster <ml001@armbruster-it.de> Reported-by:
Ralph Plawetzki <ralph@purejava.org> Reported-by:
Andreas Fett <andreas.fett@secunet.com> Reported-by:
Rasmus Lerdorf <rasmus@lerdorf.com> Reported-by:
Samo Ratnik <samo.ratnik@gmail.com> Reported-and-tested-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 82a31b92 ] Similar to commit 9b368814 ("net: fix bridge multicast packet checksum validation") we need to fixup the checksum for CHECKSUM_COMPLETE when pushing skb on RX path. Otherwise we get similar splats. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit eb70db87 ] People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that they want packets going in both directions on a flow to hash to the same bucket. The core kernel SKB hash became non-symmetric when the ipv6 flow label and other entities were incorporated into the standard flow hash order to increase entropy. But there are no users of PACKET_FANOUT_HASH who want an assymetric hash, they all want a symmetric one. Therefore, use the flow dissector to compute a flat symmetric hash over only the protocol, addresses and ports. This hash does not get installed into and override the normal skb hash, so this change has no effect whatsoever on the rest of the stack. Reported-by:
Eric Leblond <eric@regit.org> Tested-by:
-
Peter Zijlstra authored
commit 89741892 upstream. As per commit: b7fa30c9 ("sched/fair: Fix post_init_entity_util_avg() serialization") > the code generated from update_cfs_rq_load_avg(): > > if (atomic_long_read(&cfs_rq->removed_load_avg)) { > s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0); > sa->load_avg = max_t(long, sa->load_avg - r, 0); > sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0); > removed_load = 1; > } > > turns into: > > ffffffff81087064: 49 8b 85 98 00 00 00 mov 0x98(%r13),%rax > ffffffff8108706b: 48 85 c0 test %rax,%rax > ffffffff8108706e: 74 40 je ffffffff810870b0 <update_blocked_averages+0xc0> > ffffffff81087070: 4c 89 f8 mov %r15,%rax > ffffffff81087073: 49 87 85 98 00 00 00 xchg %rax,0x98(%r13) > ffffffff8108707a: 49 29 45 70 sub %rax,0x70(%r13) > ffffffff8108707e: 4c 89 f9 mov %r15,%rcx > ffffffff81087081: bb 01 00 00 00 mov $0x1,%ebx > ffffffff81087086: 49 83 7d 70 00 cmpq $0x0,0x70(%r13) > ffffffff8108708b: 49 0f 49 4d 70 cmovns 0x70(%r13),%rcx > > Which you'll note ends up with sa->load_avg -= r in memory at > ffffffff8108707a. So I _should_ have looked at other unserialized users of ->load_avg, but alas. Luckily nikbor reported a similar /0 from task_h_load() which instantly triggered recollection of this here problem. Aside from the intermediate value hitting memory and causing problems, there's another problem: the underflow detection relies on the signed bit. This reduces the effective width of the variables, IOW its effectively the same as having these variables be of signed type. This patch changes to a different means of unsigned underflow detection to not rely on the signed bit. This allows the variables to use the 'full' unsigned range. And it does so with explicit LOAD - STORE to ensure any intermediate value will never be visible in memory, allowing these unserialized loads. Note: GCC generates crap code for this, might warrant a look later. Note2: I say 'full' above, if we end up at U*_MAX we'll still explode; maybe we should do clamping on add too. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yuyang Du <yuyang.du@intel.com> Cc: bsegall@google.com Cc: kernel@kyup.com Cc: morten.rasmussen@arm.com Cc: pjt@google.com Cc: steve.muckle@linaro.org Fixes: 9d89c257 ("sched/fair: Rewrite runnable load and utilization average tracking") Link: http://lkml.kernel.org/r/20160617091948.GJ30927@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit 4ac1c17b upstream. During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Richard Weinberger authored
commit 1118dce7 upstream. Export these symbols such that UBIFS can implement ->migratepage. Signed-off-by:
-
James Hogan authored
commit 797179bc upstream. Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never get a TLB refill exception in it when KVM is built as a module. This was observed to happen with the host MIPS kernel running under QEMU, due to a not entirely transparent optimisation in the QEMU TLB handling where TLB entries replaced with TLBWR are copied to a separate part of the TLB array. Code in those pages continue to be executable, but those mappings persist only until the next ASID switch, even if they are marked global. An ASID switch happens in __kvm_mips_vcpu_run() at exception level after switching to the guest exception base. Subsequent TLB mapped kernel instructions just prior to switching to the guest trigger a TLB refill exception, which enters the guest exception handlers without updating EPC. This appears as a guest triggered TLB refill on a host kernel mapped (host KSeg2) address, which is not handled correctly as user (guest) mode accesses to kernel (host) segments always generate address error exceptions. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Steve Capper authored
commit 56530f5d upstream. Currently pmd_mknotpresent will use a zero entry to respresent an invalidated pmd. Unfortunately this definition clashes with pmd_none, thus it is possible for a race condition to occur if zap_pmd_range sees pmd_none whilst __split_huge_pmd_locked is running too with pmdp_invalidate just called. This patch fixes the race condition by modifying pmd_mknotpresent to create non-zero faulting entries (as is done in other architectures), removing the ambiguity with pmd_none. [catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Reported-by:
Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 62453188 upstream. In a subsequent patch, pmd_mknotpresent will clear the valid bit of the pmd entry, resulting in a not-present entry from the hardware's perspective. Unfortunately, pmd_present simply checks for a non-zero pmd value and will therefore continue to return true even after a pmd_mknotpresent operation. Since pmd_mknotpresent is only used for managing huge entries, this is only an issue for the 3-level case. This patch fixes the 3-level pmd_present implementation to take into account the valid bit. For bisectability, the change is made before the fix to pmd_mknotpresent. [catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Cc: Russell King <linux@armlinux.org.uk> Cc: Steve Capper <Steve.Capper@arm.com> Signed-off-by:
-
Fabio Estevam authored
commit 20c15226 upstream. The value used for Micrel PHY mask is not correct. Use the MICREL_PHY_ID_MASK definition instead. Thanks to Jiri Luznicky for proposing the fix at https://community.freescale.com/thread/387739 Fixes: 709bc065 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Trond Myklebust authored
commit e547f262 upstream. Olga Kornievskaia reports that the following test fails to trigger an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE. fd0 = open(foo, RDRW) -- should be open on the wire for "both" fd1 = open(foo, RDONLY) -- should be open on the wire for "read" close(fd0) -- should trigger an open_downgrade read(fd1) close(fd1) The issue is that we're missing a check for whether or not the current state transitioned from an O_RDWR state as opposed to having transitioned from a combination of O_RDONLY and O_WRONLY. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Fixes: cd9288ff ("NFSv4: Fix another bug in the close/open_downgrade code") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Al Viro authored
commit d20cb71d upstream. In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Tested-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit 99965378 upstream. Use set_posix_acl, which includes proper permission checks, instead of calling ->set_acl directly. Without this anyone may be able to grant themselves permissions to a file by setting the ACL. Lock the inode to make the new checks atomic with respect to set_acl. (Also, nfsd was the only caller of set_acl not locking the inode, so I suspect this may fix other races.) This also simplifies the code, and ensures our ACLs are checked by posix_acl_valid. The permission checks and the inode locking were lost with commit 4ac7249e, which changed nfsd to use the set_acl inode operation directly instead of going through xattr handlers. Reported-by:
David Sinquin <david@sinquin.eu> [agreunba@redhat.com: use set_posix_acl] Fixes: 4ac7249e Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Andreas Gruenbacher authored
commit 485e71e8 upstream. Factor out part of posix_acl_xattr_set into a common function that takes a posix_acl, which nfsd can also call. The prototype already exists in include/linux/posix_acl.h. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Oleg Drokin authored
commit 5cc1fb2a upstream. To avoid racing entry into nfs4_get_vfs_file(). Make init_open_stateid() return with locked stateid to be unlocked by the caller. Signed-off-by:
-
Oleg Drokin authored
commit feb9dad5 upstream. It used to be the case that state had an rwlock that was locked for write by downgrades, but for read for upgrades (opens). Well, the problem is if there are two competing opens for the same state, they step on each other toes potentially leading to leaking file descriptors from the state structure, since access mode is a bitmap only set once. Signed-off-by:
-
J. Bruce Fields authored
commit d50039ea upstream. Also simplify the logic a bit. Signed-off-by:
Trond Myklebust <trondmy@primarydata.com> Signed-off-by:
-
Tejun Heo authored
commit 62a584fe upstream. As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Fixes: 9fc3a43e ("writeback: separate out domain_dirty_limits()") Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Lukasz Luba authored
commit f840ab18 upstream. The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Fixes: f6859014 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Acked-by:
Javi Merino <javi.merino@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Andy Lutomirski authored
commit a44323e2 upstream. The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 85b03b30 upstream. This reverts commit 923b93e4. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Borislav Petkov authored
commit 1ead852d upstream. Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.comSigned-off-by:
-
Masami Hiramatsu authored
commit dcfc4724 upstream. Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox [ Updated the comments. ] Signed-off-by:
-
H. Peter Anvin authored
commit 9c77679c upstream. For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Paolo Bonzini authored
commit 4c5ea0a9 upstream. The following scenario is possible: CPU 1 CPU 2 static_key_slow_inc() atomic_inc_not_zero() -> key.enabled == 0, no increment jump_label_lock() atomic_inc_return() -> key.enabled == 1 now static_key_slow_inc() atomic_inc_not_zero() -> key.enabled == 1, inc to 2 return ** static key is wrong! jump_label_update() jump_label_unlock() Testing the static key at the point marked by (**) will follow the wrong path for jumps that have not been patched yet. This can actually happen when creating many KVM virtual machines with userspace LAPIC emulation; just run several copies of the following program: #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <linux/kvm.h> int main(void) { for (;;) { int kvmfd = open("/dev/kvm", O_RDONLY); int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0); close(ioctl(vmfd, KVM_CREATE_VCPU, 1)); close(vmfd); close(kvmfd); } return 0; } Every KVM_CREATE_VCPU ioctl will attempt a static_key_slow_inc() call. The static key's purpose is to skip NULL pointer checks and indeed one of the processes eventually dereferences NULL. As explained in the commit that introduced the bug: 706249c2 ("locking/static_keys: Rework update logic") jump_label_update() needs key.enabled to be true. The solution adopted here is to temporarily make key.enabled == -1, and use go down the slow path when key.enabled <= 0. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Peter Zijlstra authored
commit 2c610022 upstream. While this prior commit: 54cf809b ("locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()") ... fixes spin_is_locked() and spin_unlock_wait() for the usage in ipc/sem and netfilter, it does not in fact work right for the usage in task_work and futex. So while the 2 locks crossed problem: spin_lock(A) spin_lock(B) if (!spin_is_locked(B)) spin_unlock_wait(A) foo() foo(); ... works with the smp_mb() injected by both spin_is_locked() and spin_unlock_wait(), this is not sufficient for: flag = 1; smp_mb(); spin_lock() spin_unlock_wait() if (!flag) // add to lockless list // iterate lockless list ... because in this scenario, the store from spin_lock() can be delayed past the load of flag, uncrossing the variables and loosing the guarantee. This patch reworks spin_is_locked() and spin_unlock_wait() to work in both cases by exploiting the observation that while the lock byte store can be delayed, the contender must have registered itself visibly in other state contained in the word. It also allows for architectures to override both functions, as PPC and ARM64 have an additional issue for which we currently have no generic solution. Signed-off-by:
-
Chris Wilson authored
commit 0422e83d upstream. Recursive locking for ww_mutexes was originally conceived as an exception. However, it is heavily used by the DRM atomic modesetting code. Currently, the recursive deadlock is checked after we have queued up for a busy-spin and as we never release the lock, we spin until kicked, whereupon the deadlock is discovered and reported. A simple solution for the now common problem is to move the recursive deadlock discovery to the first action when taking the ww_mutex. Suggested-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Sergei Shtylyov authored
commit 39935466 upstream. The kernel-doc for the of_irq_get[_byname]() is clearly inadequate in describing the return values -- of_irq_get_byname() is documented better than of_irq_get() but it still doesn't mention that 0 is returned iff irq_create_of_mapping() fails (it doesn't return an error code in this case). Document all possible return value variants, making the writing of the word "IRQ" consistent, while at it... Fixes: 9ec36caf ("of/irq: do irq resolution in platform_get_irq") Fixes: ad69674e ("of/irq: do irq resolution in platform_get_irq_byname()") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Wolfram Sang authored
commit b3c0a4da upstream. Because of an improper dereference, a stray 'C' character was output to the modalias when no 'compatible' was specified. This is the case for some old PowerMac drivers which only set the 'name' property. Fix it to let them match again. Reported-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Eric W. Biederman authored
commit 97c1df3e upstream. Add this trivial missing error handling. Fixes: 1b852bce ("mnt: Refactor the logic for mounting sysfs and proc in a user namespace") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 695e9df0 upstream. In rare cases it is possible for s_flags & MS_RDONLY to be set but MNT_READONLY to be clear. This starting combination can cause fs_fully_visible to fail to ensure that the new mount is readonly. Therefore force MNT_LOCK_READONLY in the new mount if MS_RDONLY is set on the source filesystem of the mount. In general both MS_RDONLY and MNT_READONLY are set at the same for mounts so I don't expect any programs to care. Nor do I expect MS_RDONLY to be set on proc or sysfs in the initial user namespace, which further decreases the likelyhood of problems. Which means this change should only affect system configurations by paranoid sysadmins who should welcome the additional protection as it keeps people from wriggling out of their policies. Fixes: 8c6cf9cc ("mnt: Modify fs_fully_visible to deal with locked ro nodev and atime") Signed-off-by:
-
Eric W. Biederman authored
commit d71ed6c9 upstream. MNT_LOCKED implies on a child mount implies the child is locked to the parent. So while looping through the children the children should be tested (not their parent). Typically an unshare of a mount namespace locks all mounts together making both the parent and the slave as locked but there are a few corner cases where other things work. Fixes: ceeb0e5d ("vfs: Ignore unlocked mounts in fs_fully_visible") Reported-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Oscar authored
commit ea1d39a3 upstream. Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Signed-off-by:
Oscar <oscar@naiandei.net> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Alan Stern authored
commit 7e8b3dfe upstream. The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Tested-by:
-
Arnd Bergmann authored
commit 23e34392 upstream. A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq MIPS system unfortunately broke big-endian operation on PowerPC APM82181 as reported by Christian Lamparter, and likely other systems. It actually introduced multiple issues: - it broke big-endian ARM kernels: any machine that was working correctly with a little-endian kernel is no longer using byteswaps on big-endian kernels, which clearly breaks them. - On PowerPC the same thing must be true: if it was working before, using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC usually uses big-endian kernels, so they are likely all broken. - The barrier for dwc2_writel is on the wrong side of the __raw_writel(), so the MMIO no longer synchronizes with DMA operations. - On architectures that require specific CPU instructions for MMIO access, using the __raw_ variant may turn this into a pointer dereference that does not have the same effect as the readl/writel. This patch is a simple revert for all architectures other than MIPS, in the hope that we can more easily backport it to fix the regression on PowerPC and ARM systems without breaking the Lantiq system again. We should follow this up with a more elaborate change to add runtime detection of endianness, to make sure it also works on all other combinations of architectures and implementations of the usb-dwc2 device. That patch however will be fairly large and not appropriate for backports to stable kernels. Felipe suggested a different approach, using an endianness switching register to always put the device into LE mode, but unfortunately the dwc2 hardware does not provide a generic way to do that. Also, I see no practical way of addressing the problem more generally by patching architecture specific code on MIPS. Fixes: 95c8bc36 ("usb: dwc2: Use platform endianness when accessing registers") Acked-by:
John Youn <johnyoun@synopsys.com> Tested-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Cyril Bur authored
commit 8e96a87c upstream. Userspace can quite legitimately perform an exec() syscall with a suspended transaction. exec() does not return to the old process, rather it load a new one and starts that, the expectation therefore is that the new process starts not in a transaction. Currently exec() is not treated any differently to any other syscall which creates problems. Firstly it could allow a new process to start with a suspended transaction for a binary that no longer exists. This means that the checkpointed state won't be valid and if the suspended transaction were ever to be resumed and subsequently aborted (a possibility which is exceedingly likely as exec()ing will likely doom the transaction) the new process will jump to invalid state. Secondly the incorrect attempt to keep the transactional state while still zeroing state for the new process creates at least two TM Bad Things. The first triggers on the rfid to return to userspace as start_thread() has given the new process a 'clean' MSR but the suspend will still be set in the hardware MSR. The second TM Bad Thing triggers in __switch_to() as the processor is still transactionally suspended but __switch_to() wants to zero the TM sprs for the new process. This is an example of the outcome of calling exec() with a suspended transaction. Note the first 700 is likely the first TM bad thing decsribed earlier only the kernel can't report it as we've loaded userspace registers. c000000000009980 is the rfid in fast_exception_return() Bad kernel stack pointer 3fffcfa1a370 at c000000000009980 Oops: Bad kernel stack pointer, sig: 6 [#1] CPU: 0 PID: 2006 Comm: tm-execed Not tainted NIP: c000000000009980 LR: 0000000000000000 CTR: 0000000000000000 REGS: c00000003ffefd40 TRAP: 0700 Not tainted MSR: 8000000300201031 <SF,ME,IR,DR,LE,TM[SE]> CR: 00000000 XER: 00000000 CFAR: c0000000000098b4 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 00003fffcfa1a370 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 00003fff966611c0 0000000000000000 0000000000000000 0000000000000000 NIP [c000000000009980] fast_exception_return+0xb0/0xb8 LR [0000000000000000] (null) Call Trace: Instruction dump: f84d0278 e9a100d8 7c7b03a6 e84101a0 7c4ff120 e8410170 7c5a03a6 e8010070 e8410080 e8610088 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed023b Kernel BUG at c000000000043e80 [verbose debug info unavailable] Unexpected TM Bad Thing exception at c000000000043e80 (msr 0x201033) Oops: Unrecoverable exception, sig: 6 [#2] CPU: 0 PID: 2006 Comm: tm-execed Tainted: G D task: c0000000fbea6d80 ti: c00000003ffec000 task.ti: c0000000fb7ec000 NIP: c000000000043e80 LR: c000000000015a24 CTR: 0000000000000000 REGS: c00000003ffef7e0 TRAP: 0700 Tainted: G D MSR: 8000000300201033 <SF,ME,IR,DR,RI,LE,TM[SE]> CR: 28002828 XER: 00000000 CFAR: c000000000015a20 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 c00000003ffefa60 c000000000db5500 c0000000fbead000 GPR04: 8000000300001033 2222222222222222 2222222222222222 00000000ff160000 GPR08: 0000000000000000 800000010000d033 c0000000fb7e3ea0 c00000000fe00004 GPR12: 0000000000002200 c00000000fe00000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c0000000fbea7410 00000000ff160000 GPR24: c0000000ffe1f600 c0000000fbea8700 c0000000fbea8700 c0000000fbead000 GPR28: c000000000e20198 c0000000fbea6d80 c0000000fbeab680 c0000000fbea6d80 NIP [c000000000043e80] tm_restore_sprs+0xc/0x1c LR [c000000000015a24] __switch_to+0x1f4/0x420 Call Trace: Instruction dump: 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 This fixes CVE-2016-5828. Fixes: bc2a9408 ("powerpc: Hook in new transactional memory code") Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit 2c2a63e3 upstream. The recent commit 7cc85103 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") added a new PVR mask & value to the start of the ibm_architecture_vec[] array. However it missed the fact that further down in the array, we hard code the offset of one of the fields, and then at boot use that value to patch the value in the array. This means every update to the array must also update the #define, ugh. This means that on pseries machines we will misreport to firmware the number of cores we support, by a factor of threads_per_core. Fix it for now by updating the #define. Fixes: 7cc85103 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") Signed-off-by:
-
Gavin Shan authored
commit 8a934efe upstream. In commit 8445a87f "powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism", the PE address was replaced with the PCI config address in order to remove dependency on EEH. According to PAPR spec, firmware (pHyp or QEMU) should accept "xxBBSSxx" format PCI config address, not "xxxxBBSS" provided by the patch. Note that "BB" is PCI bus number and "SS" is the combination of slot and function number. This fixes the PCI address passed to DDW RTAS calls. Fixes: 8445a87f ("powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism") Reported-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by:
-
Guilherme G. Piccoli authored
commit 8445a87f upstream. Commit 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") changed the pci_dn struct by removing its EEH-related members. As part of this clean-up, DDW mechanism was modified to read the device configuration address from eeh_dev struct. As a consequence, now if we disable EEH mechanism on kernel command-line for example, the DDW mechanism will fail, generating a kernel oops by dereferencing a NULL pointer (which turns to be the eeh_dev pointer). This patch just changes the configuration address calculation on DDW functions to a manual calculation based on pci_dn members instead of using eeh_dev-based address. No functional changes were made. This was tested on pSeries, both in PHyp and qemu guest. Fixes: 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") Reviewed-by:
-
