- 01 Jun, 2018 13 commits
-
-
Petr Machata authored
Offloading of mirror-to-gretap in mlxsw is tricky especially in cases when the gretap underlay involves bridges. Add more tests that exercise the bridge handling code: - forbidden_egress tests that check vlan removal on bridge port in the underlay packet path - untagged_egress tests that similarly check "egress untagged" - fdb_roaming tests that check whether learning FDB on a different port is reflected - stp tests for handling port STP status of bridge egress port Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Rename test_gretap_forbidden() and test_ip6gretap_forbidden() to a more specific test_gretap_forbidden_cpu() and test_ip6gretap_forbidden_cpu(). This will make it clearer which is which when further down a patch is introduced that forbids a VLAN on regular bridge port. Signed-off-by:
-
Petr Machata authored
After the final change reestablishes the original configuration, make sure the traffic flows again as it should. Signed-off-by:
-
Petr Machata authored
The "ip6gretap" in the test name refers to the tunnel device type that the test is supposed to be testing. However test_ip6gretap_forbidden() tests, due to a typo, a gretap tunnel. Fix the typo. Signed-off-by:
-
Petr Machata authored
Add a reusable full test that toggles STP state of a given bridge port and checks that the mirroring reacts appropriately. The test will be used by bridge tests in follow-up patches. Signed-off-by:
-
Petr Machata authored
When the VLAN capture is installed on a front panel device and not a soft device, the packets are counted twice: once in fast path, and once after they are trapped to the kernel. Resolve the problem by passing skip_hw flag to vlan_capture_install(). Signed-off-by:
-
Petr Machata authored
Move the function do_test_span_vlan_dir_ips() from mirror_vlan.sh test to a library file mirror_lib.sh to allow reuse. Fill in other entry points similar to other testing functions in mirror_lib.sh, they will be useful in following patches. Signed-off-by:
-
Petr Machata authored
Move vlan_capture_install() and vlan_capture_uninstall() from mirror_vlan.sh test to lib.sh so that it can be reused in other tests. Signed-off-by:
-
Maxime Chevallier authored
As the mvpp2 driver is growing, move this driver to a dedicated directory and split it into several files. Since this driver has a lot of register defines and structure definitions, it can benefit from having all of this into a dedicated header file, named mvpp2.h. A good chunk of the mvpp2 code is dedicated to Header Parser handling, so we introduce mvpp2_prs.h where all Header Parser definitions are located, and mvpp2_prs.c containing the related code. In the same way, mvpp2_cls.h and mvpp2_cls.c are created to contain Classifier and RSS related code. The former 'mvpp2.c' file is renamed 'mvpp2_main.c' so that we can keep the driver binary named 'mvpp2'. This commit is only about spliting the driver into multiple files and doesn't introduce any new function, feature or fix besides removing 'static' keywords when needed. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Vlad Buslov authored
tc_ctl_tfilter handles three netlink message types: RTM_NEWTFILTER, RTM_DELTFILTER, RTM_GETTFILTER. However, implementation of this function involves a lot of branching on specific message type because most of the code is message-specific. This significantly complicates adding new functionality and doesn't provide much benefit of code reuse. Split tc_ctl_tfilter to three standalone functions that handle filter new, delete and get requests. The only truly protocol independent part of tc_ctl_tfilter is code that looks up queue, class, and block. Refactor this code to standalone tcf_block_find function that is used by all three new handlers. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Prashant Bhole authored
In rtnl_newlink(), NULL check is performed on m_ops however member of ops is accessed. Fixed by accessing member of m_ops instead of ops. [ 345.432629] BUG: KASAN: null-ptr-deref in rtnl_newlink+0x400/0x1110 [ 345.432629] Read of size 4 at addr 0000000000000088 by task ip/986 [ 345.432629] [ 345.432629] CPU: 1 PID: 986 Comm: ip Not tainted 4.17.0-rc6+ #9 [ 345.432629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 345.432629] Call Trace: [ 345.432629] dump_stack+0xc6/0x150 [ 345.432629] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 345.432629] ? kasan_report+0xb4/0x410 [ 345.432629] kasan_report.cold.4+0x8f/0x91 [ 345.432629] ? rtnl_newlink+0x400/0x1110 [ 345.432629] rtnl_newlink+0x400/0x1110 [...] Fixes: ccf8dbcd ("rtnetlink: Remove VLA usage") Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Tested-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the failover create fail error handling case instead of 0, as done elsewhere in this function. Fixes: ba5e4426 ("virtio_net: Extend virtio to use VF datapath when available") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this allocates the maximum size expected for all possible types and adds sanity-checks at both registration and usage to make sure nothing gets out of sync. This matches the proposed VLA solution for nfnetlink[2]. The values chosen here were based on finding assignments for .maxtype and .slave_maxtype and manually counting the enums: slave_maxtype (max 33): IFLA_BRPORT_MAX 33 IFLA_BOND_SLAVE_MAX 9 maxtype (max 45): IFLA_BOND_MAX 28 IFLA_BR_MAX 45 __IFLA_CAIF_HSI_MAX 8 IFLA_CAIF_MAX 4 IFLA_CAN_MAX 16 IFLA_GENEVE_MAX 12 IFLA_GRE_MAX 25 IFLA_GTP_MAX 5 IFLA_HSR_MAX 7 IFLA_IPOIB_MAX 4 IFLA_IPTUN_MAX 21 IFLA_IPVLAN_MAX 3 IFLA_MACSEC_MAX 15 IFLA_MACVLAN_MAX 7 IFLA_PPP_MAX 2 __IFLA_RMNET_MAX 4 IFLA_VLAN_MAX 6 IFLA_VRF_MAX 2 IFLA_VTI_MAX 7 IFLA_VXLAN_MAX 28 VETH_INFO_MAX 2 VXCAN_INFO_MAX 2 This additionally changes maxtype and slave_maxtype fields to unsigned, since they're only ever using positive values. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com [2] https://patchwork.kernel.org/patch/10439647/Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- 31 May, 2018 20 commits
-
-
Andrew Lunn authored
Make it explicit that either device tree is used or platform data. If neither is available, abort the probe. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 877b7cb0 ("net: dsa: mv88e6xxx: Add minimal platform_data support") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
On platforms that don't always enable CONFIG_GPIOLIB, we run into a build failure: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe': drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration] mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); Since we cannot rely on this to be visible from gpio.h, we have to include gpio/consumer.h directly. Fixes: 2652113f ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 new device events The following series is for mlx5-next tree [1], it adds the support of two new device events, from Ilan Tayari: 1. High temperature warnings. 2. FPGA QP error event. In case of no objection this series will be applied to mlx5-next tree and will be sent later as a pull request to both rdma and net trees. [1] https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git/log/?h=mlx5-next v1->v2: - improve commit message of the FPGA QP error event patch. ==================== Acked-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Ilan Tayari authored
The FPGA queue pair (QP) event fires whenever a QP on the FPGA transitions to the error state. At this stage, this event is unrecoverable, it may become recoverable in the future. Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
Adi Nissim <adin@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Ilan Tayari authored
Temperature warning event is sent by FW to indicate high temperature as detected by one of the sensors on the board. Add handling of this event by writing the numbers of the alert sensors to the kernel log. Signed-off-by:
-
Donald Sharp authored
FRRouting installs routes into the kernel associated with the originating protocol. Add these values to the well known values in rtnetlink.h. Signed-off-by:
Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by:
-
Ganesh Goudar authored
Add FORCE_PAUSE bit to force local pause settings instead of using auto negotiated values. Signed-off-by:
Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== net: bridge: Notify about bridge VLANs In commit 946a11e7 ("mlxsw: spectrum_span: Allow bridge for gretap mirror"), mlxsw got support for offloading mirror-to-gretap such that the underlay packet path involves a bridge. In that case, the offload is also influenced by PVID setting of said bridge. However, changes to VLAN configuration of the bridge itself do not generate switchdev notifications, so there's no mechanism to prod mlxsw to update the offload when these settings change. In this patchset, the problem is resolved by distributing the switchdev notification SWITCHDEV_OBJ_ID_PORT_VLAN also for configuration changes on bridge VLANs. Since stacked devices distribute the notification to lower devices, such event eventually reaches the driver, which can determine whether it's a bridge or port VLAN by inspecting orig_dev. To keep things consistent, the newly-distributed notifications observe the same protocol as the existing ones: dual prepare/commit, with -EOPNOTSUPP indicating lack of support, even though there's currently nothing to prepare for and nothing to support. Correspondingly, all switchdev drivers have been updated to return -EOPNOTSUPP for bridge VLAN notifications. In patches #1 and #2, the code base is changed to support the following additions: functions br_switchdev_port_vlan_add() and br_switchdev_port_vlan_del() are introduced to simplify sending notifications; and br_vlan_add_existing() is introduced to later make it simpler to add error-handling code for the case of configuring a preexisting VLAN on bridge CPU port. In patches #3-#6, respectively for mlxsw, rocker, DSA and DPAA2 ethsw, the new notifications (which are not enabled yet) are ignored to maintain the current behavior. In patch #7, the notification is actually enabled. In patch #8, mlxsw is changed to update offloads of mirror-to-gre also for bridge-related notifications. Changes from v3 to v4: - In patch #1, separate variable declarations from program logic. - Add patch #2. - In patch #7, add error handling around a newly-introduced call to br_switchdev_port_vlan_add(). - Rephrase commit messages of patches #3-#6 to explain motivation for the change. Changes from v2 to v3: - Add a fallback definition for br_switchdev_port_obj_add() and br_switchdev_port_obj_del() when !CONFIG_NET_SWITCHDEV. Changes from v1 to v2: - Rename br_switchdev_port_obj_add() and br_switchdev_port_obj_del() to br_switchdev_port_vlan_add() and br_switchdev_port_vlan_del(), and move from br_vlan.c to br_switchdev.c. ==================== Signed-off-by:
-
Petr Machata authored
Since there's no special support for the bridge events, the driver returns -EOPNOTSUPP, and thus the commit never happens. Therefore schedule respin during the prepare stage: there's no real difference one way or another. This fixes the problem that mirror-to-gretap offload wouldn't adapt to changes in bridge vlan configuration right away and another notification would have to arrive for mlxsw to catch up. Signed-off-by:
-
Petr Machata authored
A driver might need to react to changes in settings of brentry VLANs. Therefore send switchdev port notifications for these as well. Reuse SWITCHDEV_OBJ_ID_PORT_VLAN for this purpose. Listeners should use netif_is_bridge_master() on orig_dev to determine whether the notification is about a bridge port or a bridge. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Petr Machata authored
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by:
-
Petr Machata authored
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by:
-
Petr Machata authored
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by:
-
Petr Machata authored
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by:
-
Petr Machata authored
Extract the code that deals with adding a preexisting VLAN to bridge CPU port to a separate function. A follow-up patch introduces a need to roll back operations in this block due to an error, and this split will make the error-handling code clearer. Signed-off-by:
-
Petr Machata authored
A call to switchdev_port_obj_add() or switchdev_port_obj_del() involves initializing a struct switchdev_obj_port_vlan, a piece of code that repeats on each call site almost verbatim. While in the current codebase there is just one duplicated add call, the follow-up patches add more of both add and del calls. Thus to remove the duplication, extract the repetition into named functions and reuse. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-05-29 This series includes mlx5 FPGA and mlx5e netdevice updates: 1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari. 2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik. 3) Two FPGA dma related minor fixes, from Ilya Lesokhin. 4) Use the right table to report offloaded TC rules, from Or Gerlitz. ==================== Signed-off-by: -
Song Liu authored
Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit() is being bypassed. This is because "ret" from sch_direct_xmit() will be either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0 will reach the condition: if (ret && netif_xmit_frozen_or_stopped(txq)) return false; This patch cleans up the code by removing the whole condition. For more discussion about this, please refer to https://marc.info/?t=152727195700008Signed-off-by:Song Liu <songliubraving@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yafang Shao authored
This is additional to the commit ea1627c2 ("tcp: minor optimizations around tcp_hdr() usage"). At this point, skb->data is same with tcp_hdr() as tcp header has not been pulled yet. So use the less expensive one to get the tcp header. Remove the third parameter of tcp_rcv_established() and put it into the function body. Furthermore, the local variables are listed as a reverse christmas tree :) Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
-
- 30 May, 2018 7 commits
-
-
Yangbo Lu authored
Added myself as maintainer for QorIQ PTP clock driver. Since gianfar_ptp.c was renamed to ptp_qoriq.c, let's maintain it under QorIQ PTP clock driver. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Joe Perches authored
Remove and coalesce formats when there is an unnecessary character after a logging newline. These extra characters cause logging defects. Miscellanea: o Coalesce formats Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Arnd Bergmann authored
Test-building this driver on targets without CONFIG_OF revealed a build failure: drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration] This adjusts the #ifdef logic in the driver to make it build in all configurations. Fixes: 2652113f ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Arnd Bergmann authored
While compile-testing on arm64 with gcc-8.1, I ran into a build diagnostic: drivers/net/ethernet/freescale/fec_main.c: In function 'fec_probe': drivers/net/ethernet/freescale/fec_main.c:3517:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=] sprintf(irq_name, "int%d", i); ^~ drivers/net/ethernet/freescale/fec_main.c:3517:21: note: directive argument in the range [0, 2147483646] sprintf(irq_name, "int%d", i); ^~~~~~~ drivers/net/ethernet/freescale/fec_main.c:3517:3: note: 'sprintf' output between 5 and 14 bytes into a destination of size 8 sprintf(irq_name, "int%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It appears this has never shown on ppc32 or arm32 for an unknown reason, but now gcc fails to identify that the 'irq_cnt' loop index has an upper bound of 3, and instead uses a bogus range. To work around the warning, this changes the sprintf to snprintf with the correct buffer length. Fixes: 78cc6e7e ("net: ethernet: freescale: Allow FEC with COMPILE_TEST") Signed-off-by:Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Or Gerlitz authored
As we keep the offloaded TC rules for NIC and e-switch in two different places, make sure to return the number of offloaded flows according to the use-case and not blindly from the priv. Fixes: 655dc3d2 ('net/mlx5e: Use shared table for offloaded TC eswitch flows') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
-
Ilya Lesokhin authored
When mlx5_fpga_conn_unmap_buf is called buf->sg[0].size should equal the actual buffer size, not the message size. Otherwise we will trigger the following dma debug warning "DMA-API: device driver frees DMA memory with different size" Fixes: 537a5057 ('net/mlx5: FPGA, Add high-speed connection routines') Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Ilya Lesokhin authored
Properly initialize dma direction on fpga conn send. Do not rely on dma_dir == 0 (DMA_BIDIRECTIONAL). Signed-off-by:
-
