- 23 Oct, 2015 4 commits
-
-
Tomas Elf authored
Since we're not synchronizing the ring request list during error state capture the request list state might change between the time the corresponding error request list was allocated and dimensioned to the time when the ring request list is actually captured into the error state. If this happens then do an early exit and be aware that the captured error state might not be fully reliable. * v2: - Chris Wilson: Removed WARN_ON from size check since having the error state request list and the live driver request list diverge like this is a legitimate behaviour. - Tomas Elf: Removed update of num_request field since this made no sense. Just exit and move on. * v3: - Chris Wilson: Removed error message at the point of early exit. The user is not interested in any state changes happening during the error state capture, only in the state that we're trying to capture at the point of the error. Signed-off-by:
Tomas Elf <tomas.elf@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This reverts commit 51056723. I somehow managed to combine a patch from Tomas Elf with a totally unrelated commit message from Chris Wilson. Let's revert this and reapply properly. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
Signed-off-by: -
Daniel Vetter authored
We get tons of cases where the master interrupt handler apparently set a bit, with the SDEIIR disagreeing. No idea what's going on there, but it's consistent on gen8+, no one seems to care about it and it's making CI results flaky. Shut it up. No idea what's going on here, but we've had fun with PCH interrupts before: commit 44498aea Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them Note that there's a regression report in Bugzilla, and other regression reports on the mailing lists keep croping up. But no ill effects have ever been reported. But for paranoia still keep the message at a debug level as a breadcrumb, just in case. This message was introduced in commit 38cc46d7 Author: Oscar Mateo <oscar.mateo@intel.com> Date: Mon Jun 16 16:10:59 2014 +0100 drm/i915/bdw: Ack interrupts before handling them (GEN8) v2: Improve commit message a bit. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
- 22 Oct, 2015 2 commits
-
-
Tomas Elf authored
Grab execlist lock when cleaning up execlist queues after GPU reset to avoid concurrency problems between the context event interrupt handler and the reset path immediately following a GPU reset. * v2 (Chris Wilson): Do execlist check and use simpler form of spinlock functions. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
-
Chris Wilson authored
Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. v2: Fix i915_gem_evict_range() (now evict_for_vma) to handle ordinary and fixed objects within the same batch Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: "Daniel, Thomas" <thomas.daniel@intel.com> Signed-off-by:
-
- 21 Oct, 2015 16 commits
-
-
Matt Roper authored
v2: Don't forget to actually check the cstate->active value when tallying up the number of active CRTC's. (Ander) Signed-off-by:Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by:
Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/59561/
-
Matt Roper authored
We already ensure that pstate->visible = false when crtc->active = false during runtime programming; make sure we follow the same logic when reading out initial hardware state. Signed-off-by:
-
Matt Roper authored
Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: -
Matt Roper authored
A future patch will calculate these during the atomic 'check' phase rather than at WM programming time, so let's store the watermark values we're planning to use in the CRTC state; the values actually active on the hardware remains in intel_crtc. While we're at it, do some minor restructuring to keep ILK and SKL values in a union. v2: Don't move cxsr_allowed to state (Maarten) v3: Only calculate watermarks in state. Still keep active watermarks in intel_crtc itself. (Ville) Signed-off-by: -
Ville Syrjälä authored
Split ilk_update_wm() into two parts; one doing the programming and the other the calculations. v2: Fix typo in commit message v3 (by Matt): Heavily rebased for current codebase. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Matt Roper authored
The only platform that still has an update_sprite_wm entrypoint is SKL; on SKL, intel_update_sprite_watermarks just updates intel_plane->wm and then performs a regular watermark update. However intel_plane->wm is only used to update a couple fields in intel_wm_config, and those fields are never used by the SKL code, so on SKL an update_sprite_wm is effectively identical to an update_wm call. Since we're already ensuring that the regular intel_update_wm is called any time we'd try to call intel_update_sprite_watermarks, the whole call is redundant and can be dropped. Signed-off-by:
-
Matt Roper authored
Determine whether we need to apply this workaround at atomic check time and just set a flag that will be used by the main watermark update routine. Moving this workaround into the atomic framework reduces ilk_update_sprite_wm() to just a standard watermark update, so drop it completely and just ensure that ilk_update_wm() is called whenever a sprite plane is updated in a way that would affect watermarks. Signed-off-by:
-
Daniel Vetter authored
Requested by Chris, and since we're no longer rebasing the -next queue I can't rectify history. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nick Hoath <nicholas.hoath@intel.com> Signed-off-by:
-
Alex Dai authored
The size / offset information of all firmware ingredients are now caculated from header. Driver will validate the header and rsa key size. If any component is out of boundary, driver will reject the loading too. v6: Clean up warnings from make docs v5: Tidy up GuC titles in kernel/Doc v4: Now using 'size_dw' for those defined in css_header v3: 1) Move DOC to intel_guc_fwif.h right before css_header definition. Add more comments. 2) Change 'size' to 'len' or 'length' to avoid confusion. 3) Add UOS_RSA_SCRATCH_MAX_COUNT according to BSpec. And driver validate size of RSA key now. 4) Add fw component size/offset info to intel_guc_fw. v2: Add indent into DOC to make fixed-width format rather than change the tmpl. v1: 1) guc_css_header is defined as __packed now 2) Add and correct GuC related topics in kernel/Doc Signed-off-by:Alex Dai <yu.dai@intel.com> Reviewed-by:
-
Jani Nikula authored
Revision checks are almost always accompanied by a platform check. (The exceptions are platform specific code.) Add helpers to check for a platform and a revision range: IS_SKL_REVID() and IS_BXT_REVID(). In most places this simplifies and clarifies the code. It will be obvious that revid macros are used for the correct platform. This should make it easier to find all the revision checks for workarounds for each platform, and make it easier to remove them once we drop support for early hardware revisions. This should also make it easier to differentiate between Skylake and Kabylake revision checks when Kabylake support is added. v2: rebase Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1445343722-3312-3-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
Prefer inclusive ranges for revision checks rather than "below B0". Per specs A2 is not used, so revid <= A1 matches revid < B0. Acked-by:
-
Jani Nikula authored
Totally unnecessary. Acked-by:
-
Maarten Lankhorst authored
intel_crtc_disable_noatomic is called from hw readout during init, resume and possibly reset. During init it's too early to have a page flip queued, before suspending all page flips should be finished and during hw reset all page flips should be removed. It's a bug when there are pending flips here, complain with WARN_ON instead of handling it. Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by:
-
Tvrtko Ursulin authored
Previously rotation was ignored and wrong stride programmed into the plane registers resulting in a corrupt image on screen. v2: Do not access potentialy old plane state at flip time, but store the rotation value at the time of queing the flip. (Ville) v3: No need to pass rotation to intel_queue_mmio_flip since it is available in the crtc. (Ville) Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Testcase: igt/kms_rotation_crc/primary-rotation-90-flip-stress (SKL) Reviewed-by:
-
Tvrtko Ursulin authored
Cdclk < crtc_clock is not allowed and suggests a different problem elsewhere in the code. It is more robust and safe to assume no scaling is possible in this case with no other downsides since it will also WARN_ON_ONCE so that this definitely gets noticed. Call it an assert to help new platform bring-up in simulation. v2: Better commit msg and use WARN_ON_ONCE to signify the unexpectedness. v3: Move zero crtc_clock check under the warn. (Ville) Signed-off-by:
-
Shobhit Kumar authored
Especially in cases where pre-os does not enable display, cdclk might not be in sane state. During sanitization initialize cdclk with maximum value till we get dynamic cdclk support. v2: Check if BIOS programmed correctly rather than always calling init - Do validation of programmed cdctl and what it is expected - Only do slk_init_cdclk if validation failed else reuse BIOS programmed value v3: Move the validation logic in a separate sanitize function (Ville) v4: No need to check LCPLL after sanitize and use max_cdclk_freq instead of hardcoded value (Ville) Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Shobhit Kumar <shobhit.kumar@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1445344992-14658-1-git-send-email-shobhit.kumar@intel.comReviewed-by:
-
- 20 Oct, 2015 2 commits
-
-
Nick Hoath authored
Break out common code from gen8_gt_irq_handler and put it in to an always inlined function. gcc optimises out the shift at compile time. (Thomas Daniel/Daniel Vetter/Chris Wilson) Issue: VIZ-4277 Signed-off-by:
Nick Hoath <nicholas.hoath@intel.com> Cc: Thomas Daniel <thomas.daniel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1445333036-22164-3-git-send-email-nicholas.hoath@intel.comSigned-off-by:
-
Nick Hoath authored
Renamed tmp variable to the more descriptive iir. (Daniel Vetter/ Thomas Daniel) Issue: VIZ-4277 Signed-off-by:
-
- 19 Oct, 2015 12 commits
-
-
Matt Roper authored
Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: -
David Henningsson authored
Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/1444987464-8657-1-git-send-email-david.henningsson@canonical.comSigned-off-by:
-
Chris Wilson authored
Since the beginning we have conflated the size of the global GTT with that of the per-process context sizes. In recent times (gen8+), those are no longer the same where the global GTT is limited to 2/4GiB but the per-process GTT may be anything up to 256TiB. Userspace knows nothing of this discrepancy and outside of one or two hacks, uses the getaperture ioctl to determine the maximum size it can use. Let's leave that as reporting the global GTT and use the context reporting method to describe the per-process value (which naturally fallsback to reporting the aliasing or global on older platforms, so userspace can always use this method where available). Testcase: igt/gem_userptr_blits/minor-normal-sync Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90065Signed-off-by:
-
Chris Wilson authored
If we have llc coherency, we can write directly into the ringbuffer using ordinary cached writes rather than forcing WC access. v2: An important consequence is that we can forgo the mappable request for WB ringbuffers, allowing for many more simultaneous contexts. Signed-off-by:
-
Michel Thierry authored
Use 48b addresses if hw supports it (i915.enable_ppgtt=3). Update the sanitize_enable_ppgtt for 48 bit PPGTT mode. Note, aliasing PPGTT remains 32b only. v2: s/full_64b/full_48b/. (Akash) v3: Add sanitize_enable_ppgtt changes until here. (Akash) v4: Update param description (Chris) Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
The atomic helpers set planes_changed on a crtc_state if there is any plane_state bound to that crtc. If there's none and there is no pipe update required the crtc has nothing to update, so vblank evasion can be skipped. Signed-off-by:
-
Maarten Lankhorst authored
The crtc->active guards are no longer needed now that all state updates are outside the commit. Changes since v1: - Only check crtc->state->active before calling commit_planes_on_crtc. Signed-off-by:
-
Maarten Lankhorst authored
In the next commit commit_plane will no longer check if the crtc is active. To prevent issues with legacy page flips the check should be performed inside update_primary_planes. Signed-off-by:
-
Maarten Lankhorst authored
This should allow not running plane commit when the crtc is off. While the atomic helpers update those, crtc->x/y is only updated during modesets, and primary plane is updated after this function returns. Unfortunately non-atomic watermarks and fbc still depend on this state inside i915, so it has to be kept in sync. Changes since v1: - Add comment that the legacy state is updated for fbc. Signed-off-by:
-
Maarten Lankhorst authored
Now that we agreed on not preserving framebuffers pinning is finally allowed to fail because of signals. Use this to make pinning and acquire the mutex in an interruptible way too. Unpinning is still uninterruptible, because it happens as a cleanup of old state, or undoing pins after one of the pins failed. The intel_pin_and_fence_fb_obj in page_flip will also wait interruptibly, and can be aborted now. Signed-off-by:
-
Maarten Lankhorst authored
atomic->disabled_planes is a hack that had to exist because prepare_fb was only called when a new fb was set. This messed up fb tracking in some circumstances like aborts from interruptible waits. As a result interruptible waiting in prepare_plane_fb was forbidden, but other errors could still cause frontbuffer tracking to be messed up. Now that prepare_fb is always called, this hack is no longer required and prepare_fb may fail without consequences. Changes since v1: - Clean up a few fb tracking warnings by changing plane->fb to plane->state->fb. Signed-off-by:
-
Animesh Manna authored
Mmio register access after dc6/dc5 entry is not allowed when DC6 power states are enabled according to bspec (bspec-id 0527), so enabling dc6 as the last call in suspend flow. Addtional note from Imre: Currently we keep DC6 enabled during modesets and DPAUX transfers, which is not allowed according to the specification. This can lead at least to PLL locking failures, DPAUX timeouts and prevent deeper package power states (PC9/10). Fix this for now by enabling DC6 only when we know the above events (modeset, DPAUX) can't happen. This a temporary solution as some issues are still unsolved as described in [1] and [2], we'll address those as a follow-up. [1] http://lists.freedesktop.org/archives/intel-gfx/2015-October/077669.html [2] http://lists.freedesktop.org/archives/intel-gfx/2015-October/077787.html v1: Initial version. v2: Based on review comment from Daniel, - created a seperate patch for csr uninitialization set call. v3: Rebased on top of latest code. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Signed-off-by:
Vathsala Nagaraju <vathsala.nagaraju@intel.com> Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Acked-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
- 15 Oct, 2015 4 commits
-
-
Ville Syrjälä authored
We still had one lingering RMW in ivb_sprite_disable(), all the other RMWs were killed off from the sprite code some time ago. Kill the straggler too. Signed-off-by:
-
Daniel Vetter authored
This was accidentally lost in commit 75d04a37 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Bob Paauwe authored
Since SKL has universal planes, we should configure the sprite planes and the primary plane the same. For the primary plane we do enable the pipe gamma on the plane so do the same for the non-primary planes. Without this, the pipe CRC values will be different for something displayed on the primary plane and something displayed on a sprite plane when the ARGB8888 format is used. Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
-
Bob Paauwe authored
Extend this to SKL and BXT as it's needed for these platforms as well. v2: Change if condition to HAS_DDI() instead of listing each platform Signed-off-by:
-
