- 28 Jul, 2004 8 commits
-
-
Guennadi Liakhovetski authored
add new maintainer Signed-off-by:James Bottomley <James.Bottomley@SteelEye.com>
-
Adrian Bunk authored
Trying to compile drivers/scsi/nsp32.c in 2.6.8-rc1-mm1 using gcc 3.4 results in compile errors starting with the following: <-- snip --> ... CC drivers/scsi/nsp32.o drivers/scsi/nsp32.c: In function `nsp32_prom_start': drivers/scsi/nsp32.c:270: sorry, unimplemented: inlining failed in call to 'nsp32_prom_set': function body not available drivers/scsi/nsp32.c:3348: sorry, unimplemented: called from here drivers/scsi/nsp32.c:270: sorry, unimplemented: inlining failed in call to 'nsp32_prom_set': function body not available drivers/scsi/nsp32.c:3349: sorry, unimplemented: called from here drivers/scsi/nsp32.c:270: sorry, unimplemented: inlining failed in call to 'nsp32_prom_set': function body not available drivers/scsi/nsp32.c:3350: sorry, unimplemented: called from here drivers/scsi/nsp32.c:270: sorry, unimplemented: inlining failed in call to 'nsp32_prom_set': function body not available drivers/scsi/nsp32.c:3351: sorry, unimplemented: called from here drivers/scsi/nsp32.c:270: sorry, unimplemented: inlining failed in call to 'nsp32_prom_set': function body not available drivers/scsi/nsp32.c:3353: sorry, unimplemented: called from here make[2]: *** [drivers/scsi/nsp32.o] Error 1 <-- snip --> The patch below removes the inlines from nsp32_prom_{get,set}. An alternative approach would be to move the functions above the place where they are called the first time. Signed-off-by:Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
-
Adrian Bunk authored
Trying to compile drivers/scsi/dc395x.c in 2.6.8-rc1-mm1 using gcc 3.4 results in compile errors starting with the following: <-- snip --> ... CC drivers/scsi/dc395x.o drivers/scsi/dc395x.c: In function `dc395x_handle_interrupt': drivers/scsi/dc395x.c:388: sorry, unimplemented: inlining failed in call to 'enable_msgout_abort': function body not available drivers/scsi/dc395x.c:1740: sorry, unimplemented: called from here make[2]: *** [drivers/scsi/dc395x.o] Error 1 <-- snip --> The patch below moves enable_msgout_abort above the place where it is called the first time and removes the bogus inline from the prototype of set_xfer_rate (the function itself isn't marked as inline). An alternative approach would be to remove the inline from enable_msgout_abort. Signed-off-by:
-
Adrian Bunk authored
[patch] kill local sg_ms_to_jif/sg_jif_to_ms functions and use msecs_to_jiffies/jiffies_to_msecs instead Signed-off-by: -
Andrew Vasquez authored
Update version number to 8.00.00b15-k. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Correct usage of tag-command-queueing methods: o Properly call scsi_activate_tcq() rather than scsi_adjust_queue_depth(). o Properly retrieve tag message from command via scsi_populate_tag_msg(). Signed-off-by: -
Andrew Vasquez authored
Fix issue where firmware options were not properly being set before firmware initialization. Signed-off-by:
-
Andrew Vasquez authored
Fix issue where host-reset would incorrectly return a FAILED status. Signed-off-by:
-
- 16 Jul, 2004 1 commit
-
-
Adrian Bunk authored
The patch below does the following small cleanups for the advansys driver: - remove obsolete maintainer information - remove kernel 2.2 code from advansys.h diffstat output: MAINTAINERS | 7 drivers/scsi/advansys.c | 342 +++++++--------------------------------- drivers/scsi/advansys.h | 26 --- 3 files changed, 60 insertions(+), 315 deletions(-) Signed-off-by:
-
- 12 Jul, 2004 1 commit
-
-
Adrian Bunk authored
Trying to compile drivers/scsi/ips.c with gcc 3.4 and # define inline __inline__ __attribute__((always_inline)) results in the following error: <-- snip --> ... CC drivers/scsi/ips.o drivers/scsi/ips.c: In function `ips_eh_abort': drivers/scsi/ips.c:490: sorry, unimplemented: inlining failed in call to 'ips_removeq_copp': function body not available drivers/scsi/ips.c:843: sorry, unimplemented: called from here drivers/scsi/ips.c:488: sorry, unimplemented: inlining failed in call to 'ips_removeq_wait': function body not available drivers/scsi/ips.c:847: sorry, unimplemented: called from here make[2]: *** [drivers/scsi/ips.o] Error 1 <-- snip --> The patch below removes all inlines from ips.c. As a side effect, this showed that 3 formerly inlined functions are completely unused which are also removed in the patch. An alternative approach to removing the inlines would be to keep all inlines that are _really_ required and reorder the functions in the file accordingly. diffstat output: drivers/scsi/ips.c | 130 ++++++--------------------------------------- 1 files changed, 19 insertions(+), 111 deletions(-) Signed-off-by:
-
- 11 Jul, 2004 1 commit
-
-
Andrew Morton authored
From: Mika Kukkonen <mika@osdl.org> CC [M] drivers/block/cciss.o In file included from drivers/scsi/scsi.h:27, from drivers/block/cciss_scsi.c:31, from drivers/block/cciss.c:188: include/scsi/scsi_device.h:191: warning: `inline' is not at beginning of declaration Another case of reordering the 'inline' and function return value. Signed-off-by:Andrew Morton <akpm@osdl.org> Signed-off-by:
-
- 10 Jul, 2004 7 commits
-
-
Adrian Bunk authored
If you send an email to linux-megaraid-devel@dell.com, you get an automated response to send the mail to linux-scsi@vger.kernel.org instead. The patch below updates megaraid.c accordingly. Signed-off-by:
-
Guennadi Liakhovetski authored
> Short: The attached patch fixes the bug-report #2139 from kernel bugzilla. I wasn't quite convenient with the previous version of the patch, but I just wanted to get it working at first and get some comments as to whether the approach (put a workaround vs. blacklisting) is at all valid. Since no objections arrived, I guess, nobody minds this small trick. So, I am enclosing a reworked patch, which does essentially the same, but has some more careful checking, and overall looks saner, than the previous one. Signed-off-by: -
Andrew Morton authored
drivers/message/fusion/mptbase.c: In function `GetIocFacts': drivers/message/fusion/mptbase.c:2420: warning: int format, different type arg (arg 4) Signed-off-by:
-
James Bottomley authored
From: "Moore, Eric Dean" <Emoore@lsil.com> This driver incorporates the patches from Christoph Hellwig and Masao Fukuchi. Changelog of this release: * Patch provided by Masao Fukuchi [fukuchi.masao@jp.fujitsu.com] - mptctl updates for hot plug * Patch provided by Christoph Hellwig [hch@infradead.org] - mptlan updates for hot plug - remove CONFIG_LBD ifdefs from fusion { mptscsih.c} Signed-off-by: -
Brian King authored
The following patch fixes an oops I was seeing on a machine with misconfigured scsi cables, but could feasibly happen in other paths. The oops was occurring because scsi_remove_device was getting called for a device before scsi_add_device had fully completed. This resulted in sysfs_remove_link being called with a NULL dentry. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Mark Haverkamp authored
This restores a fix to the aacraid reset handler. It makes sure that there are no active commands on any attached device before exiting with SUCCESS. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Randy Dunlap authored
Use correct config symbol name for MACH_JAZZ in JAZZ_ESP driver config. Acked by Ralf. Signed-off-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
-
- 28 Jun, 2004 6 commits
-
-
Christoph Hellwig authored
Signed-off-by:
Jes Sorensen <jes@wildopensource.com> Signed-off-by:
-
Christoph Hellwig authored
no function changes, just some more gotos and less nested ifs to make the code readable. Signed-off-by:
-
Christoph Hellwig authored
qla1280_nvram_config is a huge mess. Split it up into managable subroutines and add suport for the ISP1040 to it. Add missing call to set the age limit also on 1280/1x160. Signed-off-by:
-
Christoph Hellwig authored
The ISP1040 needs to load firmware by PIO, and while we're at it clean the convoluted mess of firmware loading up by splitting it into managable subroutines. Signed-off-by:
-
Christoph Hellwig authored
The code is already messy due to the explicit pci id checks for 1280 vs 1x160, so add some nice helpers for that. Signed-off-by:
-
Christoph Hellwig authored
The old 1020/1040 has some registers where the newer controlers only have reserved space, add that to qla1280.h Signed-off-by:
-
- 27 Jun, 2004 16 commits
-
-
Andries E. Brouwer authored
CAP_DAC_OVERRIDE fails to give search permission in a directory with mode 0. Patch acked by Chris Wright <chrisw@osdl.org> Signed-off-by:
Andries Brouwer <aeb@cwi.nl> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Alexey Dobriyan authored
There's no reason to keep files that a) nobody #include's b) produce #error Signed-off-by:
-
Andy Whitcroft authored
For each node there are a defined list of MAX_NR_ZONES zones. These are selected as a result of the __GFP_DMA and __GFP_HIGHMEM zone modifier flags being passed to the memory allocator as part of the GFP mask. Each node has a set of zone lists, node_zonelists, which defines the list and order of zones to scan for each flag combination. When initialising these lists we iterate over modifier combinations 0 .. MAX_NR_ZONES. However, this is only correct when there are at most ZONES_SHIFT flags. If another flag is introduced zonelists for it would not be initialised. This patch introduces GFP_ZONETYPES (based on GFP_ZONEMASK) as a bound for the number of modifier combinations. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Alan Cox authored
Like a few other drivers the vc driver is doing unlocked careless references to file offsets. Its got kind of 2.2 locking that hasnt been updated in the lseek function so someone at least tried. Fortunately we have a real lock for this and can just make lseek use that too. The 'assume 64bit load is atomic' bug seems to be very widely spread akpm@osdl.org: Move declarations to vt_kern.h Signed-off-by:
-
David Eger authored
Here's the accel capabilities patch for radeonfb. It updates radeonfb to advertise its acceleration capabilities via fbinfo.flags. I've tested this on my box, and it gives me a nice fast console. defect: "$ fbset -accel 0" doesn't work for radeonfb -- disabling accel will only work from the kernel command line :-/ Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
David Eger <eger@havoc.gtf.org> Signed-off-by:
-
Zwane Mwaikambo authored
This has been reported a couple of times and is consistently causing some folks grief, so Urban, would you mind terribly if i send this patch to at least clear current bug reports. If there is additional stuff you want ontop of this let me know and i can send a follow up patch. The bug is that at times we haven't completed setting up the smb_ops so we have a temporary 'null' ops in place until the connection is completely up. With this setup it's possible to hit ->readdir() whilst the null ops are still in place, so we put the process to sleep until the connection setup is complete and then call the real ->readdir(). This patch addresses the bugzilla report at http://bugzilla.kernel.org/show_bug.cgi?id=1671Signed-off-by:
Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by:
-
Andrew Morton authored
- Fix the !CONFIG_FRAME_POINTER && !CONFIG_KALLSYMS output formatting. - Make print_context_stack() static Signed-off-by:
-
Andy Whitcroft authored
If a fault in the kernel leads to an unexpected protection fault whilst in a code path which holds mmap_sem we will deadlock in do_page_fault() while trying to classify the fault. By carefully testing the source of the fault we can detect and OOPS on the vast majority of these, greatly enhancing diagnosis of such bugs. Signed-off-by:
-
Joseph Fannin authored
We need setup.h for COMMAND_LINE_SIZE. Signed-off-by:
Joseph Fannin <jhf@rivenstone.net> Signed-off-by:
-
Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
A microsecond is 1 millionth of a second not 1 thousandth of a second. Noticed by Markus Mottl <markus@oefai.at> Signed-off-by:David S. Miller <davem@redhat.com>
-
Adrian Bunk authored
Signed-off-by:
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
David S. Miller authored
Also uninline pfn_to_page and page_to_pfn. Struct page is now 8 bytes smaller.
-
Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
