- 11 Sep, 2013 40 commits
-
-
Michael Holzheu authored
For zfcpdump we can't map the HSA storage because it is only available via a read interface. Therefore, for the new vmcore mmap feature we have introduce a new mechanism to create mappings on demand. This patch introduces a new architecture function remap_oldmem_pfn_range() that should be used to create mappings with remap_pfn_range() for oldmem areas that can be directly mapped. For zfcpdump this is everything besides of the HSA memory. For the areas that are not mapped by remap_oldmem_pfn_range() a generic vmcore a new generic vmcore fault handler mmap_vmcore_fault() is called. This handler works as follows: * Get already available or new page from page cache (find_or_create_page) * Check if /proc/vmcore page is filled with data (PageUptodate) * If yes: Return that page * If no: Fill page using __vmcore_read(), set PageUptodate, and return page Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Holzheu authored
Exchange the old relocate mechanism with the new arch function call override mechanism that allows to create the ELF core header in the 2nd kernel. Signed-off-by:
-
Michael Holzheu authored
For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: -
Xishi Qiu authored
Code can not run here forever, so remove the unnecessary return. Signed-off-by:
Xishi Qiu <qiuxishi@huawei.com> Suggested-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reviewed-by:
Simon Horman <horms@verge.net.au> Reviewed-by:
-
Oleg Nesterov authored
The error hanling and ret-from-loop look confusing and inconsistent. - "retval >= 0" simply returns - "!bprm->file" returns too but with read_unlock() because binfmt_lock was already re-acquired - "retval != -ENOEXEC || bprm->mm == NULL" does "break" and relies on the same check after the main loop Consolidate these checks into a single if/return statement. need_retry still checks "retval == -ENOEXEC", but this and -ENOENT before the main loop are not needed. This is only for pathological and impossible list_empty(&formats) case. It is not clear why do we check "bprm->mm == NULL", probably this should be removed. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Zach Levis <zml@linux.vnet.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
A separate one-liner for better documentation. It doesn't make sense to retry if request_module() fails to exec /sbin/modprobe, add the additional "request_module() < 0" check. However, this logic still doesn't look exactly right: 1. It would be better to check "request_module() != 0", the user space modprobe process should report the correct exit code. But I didn't dare to add the user-visible change. 2. The whole ENOEXEC logic looks suboptimal. Suppose that we try to exec a "#!path-to-unsupported-binary" script. In this case request_module() + "retry" will be done twice: first by the "depth == 1" code, and then again by the "depth == 0" caller which doesn't make sense. 3. And note that in the case above bprm->buf was already changed by load_script()->prepare_binprm(), so this looks even more ugly. Signed-off-by:
-
Oleg Nesterov authored
search_binary_handler() uses "for (try=0; try<2; try++)" to avoid "goto" but the code looks too complicated and horrible imho. We still need to check "try == 0" before request_module() and add the additional "break" for !CONFIG_MODULES case. Kill this loop and use a simple "bool need_retry" + "goto retry". The code looks much simpler and we do not even need ifdef's, gcc can optimize out the "if (need_retry)" block if !IS_ENABLED(). Signed-off-by:
-
Oleg Nesterov authored
search_binary_handler() checks ->load_binary != NULL for no reason, this method should be always defined. Turn this check into WARN_ON() and move it into __register_binfmt(). Also, kill the function pointer. The current code looks confusing, as if ->load_binary can go away after read_unlock(&binfmt_lock). But we rely on module_get(fmt->module), this fmt can't be changed or unregistered, otherwise this code is buggy anyway. Signed-off-by:
-
Oleg Nesterov authored
When search_binary_handler() succeeds it does allow_write_access() and fput(), then it clears bprm->file to ensure the caller will not do the same. We can simply move this code to exec_binprm() which is called only once. In fact we could move this to free_bprm() and remove the same code in do_execve_common's error path. Signed-off-by:
-
Oleg Nesterov authored
A separate one-liner with the minor fix. PROC_EVENT_EXEC reports the "exec" event, but this message is sent at least twice if search_binary_handler() is called by ->load_binary() recursively, say, load_script(). Move it to exec_binprm(), this is "depth == 0" code too. Signed-off-by:
-
Oleg Nesterov authored
Nobody except search_binary_handler() should touch ->recursion_depth, "int depth" buys nothing but complicates the code, kill it. Probably we should also kill "fn" and the !NULL check, ->load_binary should be always defined. And it can not go away after read_unlock() or this code is buggy anyway. Signed-off-by:
-
Oleg Nesterov authored
task_pid_nr_ns() and trace/ptrace code in the middle of the recursive search_binary_handler() looks confusing and imho annoying. We only need this code if "depth == 0", lets add a simple helper which calls search_binary_handler() and does trace_sched_process_exec() + ptrace_event(). The patch also moves the setting of task->did_exec, we need to do this only once. Note: we can kill either task->did_exec or PF_FORKNOEXEC. Signed-off-by:
-
Oleg Nesterov authored
proc_fd_permission() says "process can still access /proc/self/fd after it has executed a setuid()", but the "task_pid() = proc_pid() check only helps if the task is group leader, /proc/self points to /proc/<leader-pid>. Change this check to use task_tgid() so that the whole thread group can access its /proc/self/fd or /proc/<tid-of-sub-thread>/fd. Notes: - CLONE_THREAD does not require CLONE_FILES so task->files can differ, but I don't think this can lead to any security problem. And this matches same_thread_group() in __ptrace_may_access(). - /proc/self should probably point to /proc/<thread-tid>, but it is too late to change the rules. Perhaps it makes sense to add /proc/thread though. Test-case: void *tfunc(void *arg) { assert(opendir("/proc/self/fd")); return NULL; } int main(void) { pthread_t t; pthread_create(&t, NULL, tfunc, NULL); pthread_join(t, NULL); return 0; } fails if, say, this executable is not readable and suid_dumpable = 0. Signed-off-by: -
Chen Gang authored
mpol_to_str() may fail, and not fill the buffer (e.g. -EINVAL), so need check about it, or buffer may not be zero based, and next seq_printf() will cause issue. The failure return need after mpol_cond_put() to match get_vma_policy(). Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Minto Joseph authored
Fix mistake in the description of Committed_AS in kernel documentation. Signed-off-by:
Minto Joseph <mvaliyav@redhat.com> Signed-off-by:
-
Andrew Morton authored
Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Stéphane Graber authored
Add a new %P variable to be used in core_pattern. This variable contains the global PID (PID in the init namespace) as %p contains the PID in the current namespace which isn't always what we want. The main use for this is to make it easier to handle crashes that happened within a container. With that new variables it's possible to have the crashes dumped into the container or forwarded to the host with the right PID (from the host's point of view). Signed-off-by:
Stéphane Graber <stgraber@ubuntu.com> Reported-by:
Hans Feldt <hans.feldt@ericsson.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andy Whitcroft <apw@canonical.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
-
Mark Grondona authored
__ptrace_may_access() checks get_dumpable/ptrace_has_cap/etc if task != current, this can can lead to surprising results. For example, a sub-thread can't readlink("/proc/self/exe") if the executable is not readable. setup_new_exec()->would_dump() notices that inode_permission(MAY_READ) fails and then it does set_dumpable(suid_dumpable). After that get_dumpable() fails. (It is not clear why proc_pid_readlink() checks get_dumpable(), perhaps we could add PTRACE_MODE_NODUMPABLE) Change __ptrace_may_access() to use same_thread_group() instead of "task == current". Any security check is pointless when the tasks share the same ->mm. Signed-off-by:Mark Grondona <mgrondona@llnl.gov> Signed-off-by:
Ben Woodard <woodard@redhat.com> Signed-off-by:
-
Vyacheslav Dubeyko authored
Integrate implemented POSIX ACLs support into hfsplus driver. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Vyacheslav Dubeyko authored
Implement POSIX ACLs support in hfsplus driver. Signed-off-by:
-
Vyacheslav Dubeyko authored
This patchset implements POSIX ACLs support in hfsplus driver. Mac OS X beginning with version 10.4 ("Tiger") support NFSv4 ACLs, which are part of the NFSv4 standard. HFS+ stores ACLs in the form of specially named extended attributes (com.apple.system.Security). But this patchset doesn't use "com.apple.system.Security" extended attributes. It implements support of POSIX ACLs in the form of extended attributes with names "system.posix_acl_access" and "system.posix_acl_default". These xattrs are treated only under Linux. POSIX ACLs doesn't mean something under Mac OS X. Thereby, this patch set provides opportunity to use POSIX ACLs under Linux on HFS+ filesystem. This patch: Add CONFIG_HFSPLUS_FS_POSIX_ACL kernel configuration option, DBG_ACL_MOD debugging flag and acl.h file with declaration of essential functions for support POSIX ACLs in hfsplus driver. Signed-off-by: -
Julia Lawall authored
Convert the composition of devm_request_mem_region and devm_ioremap to a single call to devm_ioremap_resource. The associated call to platform_get_resource is also simplified and moved next to the new call to devm_ioremap_resource. This was done using a combination of the semantic patches devm_ioremap_resource.cocci and devm_request_and_ioremap.cocci, found in the scripts/coccinelle/api directory. In rtc-lpc32xx.c and rtc-mv.c, the local variable size is no longer needed. In rtc-ds1511.c the size field of the local structure is not useful any more, and is deleted. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Alexander Shiyan authored
Let RTC core decide if the retrieved time is invalid, instead of processing errors in the driver. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Alexander Shiyan authored
Private field "rtc" is not used outside "probe", so there is no reason to keep it. Signed-off-by:
-
Alexander Shiyan authored
Replace devm_request_mem_region() and devm_ioremap() with devm_ioremap_resource(). Signed-off-by:
-
Xianglong Du authored
enable_irq_wake() might fail, if so, we will see kernel warning in resume entries due to it always calls disable_irq_wake(). WARNING: at kernel/irq/manage.c:529 irq_set_irq_wake+0xc4/0xf0() Unbalanced IRQ 52 wake disable Modules linked in: ipv6 libcomposite configfs CPU: 0 PID: 1591 Comm: ash Tainted: G W 3.10.0-00854-gdbd86d4-dirty #100 (unwind_backtrace+0x0/0xf8) from (show_stack+0x10/0x14) (show_stack+0x10/0x14) from (warn_slowpath_common+0x54/0x68) (warn_slowpath_common+0x54/0x68) from (warn_slowpath_fmt+0x30/0x40) (warn_slowpath_fmt+0x30/0x40) from (irq_set_irq_wake+0xc4/0xf0) (irq_set_irq_wake+0xc4/0xf0) from (sirfsoc_rtc_restore+0x30/0x38) (sirfsoc_rtc_restore+0x30/0x38) from (platform_pm_restore+0x2c/0x50) (platform_pm_restore+0x2c/0x50) from (dpm_run_callback.clone.6+0x30/0xb0) (dpm_run_callback.clone.6+0x30/0xb0) from (device_resume+0x88/0x134) (device_resume+0x88/0x134) from (dpm_resume+0x114/0x230) (dpm_resume+0x114/0x230) from (hibernation_snapshot+0x178/0x1d0) (hibernation_snapshot+0x178/0x1d0) from (hibernate+0x130/0x1dc) (hibernate+0x130/0x1dc) from (state_store+0xb4/0xc0) (state_store+0xb4/0xc0) from (kobj_attr_store+0x14/0x20) (kobj_attr_store+0x14/0x20) from (sysfs_write_file+0xfc/0x17c) (sysfs_write_file+0xfc/0x17c) from (vfs_write+0xc8/0x194) (vfs_write+0xc8/0x194) from (SyS_write+0x40/0x6c) (SyS_write+0x40/0x6c) from (ret_fast_syscall+0x0/0x30) To avoid unbalanced "IRQ wake disable", ensure that disable_irq_wake() is called only when enable_irq_wake() have been successfully enabled. Signed-off-by:Xianglong Du <Xianglong.Du@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Jingoo Han authored
check_rtc_access_enable() returns pointer, thus NULL should be used instead of 0 in order to fix the following sparse warning: drivers/rtc/rtc-nuc900.c:102:16: warning: Using plain integer as NULL pointer Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sangjung Woo authored
Fix a read of the wrong register when checking whether the RTC timer has reached the alarm time. Signed-off-by:
Sangjung Woo <sangjung.woo@samsung.com> Signed-off-by:
Myugnjoo Ham <myungjoo.ham@samsung.com> Reviewed-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by:
-
Alexander Holler authored
Stop processing hid input when registering the RTC fails and handle a NULL returned from devm_rtc_device_register() as a failure too. Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Signed-off-by:
-
Laxman Dewangan authored
Palmas series device like TPS65913, TPS80036 supports the backup battery for powering the RTC when no other energy source is available. The backup battery is optional, connected to the VBACKUP pin, and can be nonrechargeable or rechargeable. The rechargeable battery can be charged from the system supply using the backup battery charger. Add support for enabling charging of this backup battery. Also add the DT binding document and the new properties to have this support. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Kumar Gala <galak@codeaurora.org> Signed-off-by:
-
Hebbar Gururaja authored
On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN) is available to enable Alarm Wakeup feature. This register needs to be properly handled for the rtcwake to work properly. Platforms using such IP should set "ti,am3352-rtc" in rtc device dt compatibility node. Signed-off-by:
Hebbar Gururaja <gururaja.hebbar@ti.com> Acked-by:
Kevin Hilman <khilman@linaro.org> Acked-by:
Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Jonas Jensen authored
Add RTC driver for MOXA ART SoCs. Signed-off-by:
Jonas Jensen <jonas.jensen@gmail.com> Reviewed-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Sachin Kamat authored
The 'remove' function is empty and does not do anything. Delete it. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Alexander Holler authored
In order to get the module automatically loaded by hotplug mechanisms a MODULE_DEVICE_TABLE is needed. Therefore add one. This makes it also possible to use a module name other than HID-SENSOR-2000a0 which isn't very descriptive in kernel messages. Signed-off-by:
-
Heiko Carstens authored
With the general-instruction extension facility (z10) a couple of instructions with a pc-relative long displacement were introduced. The kprobes support for these instructions however was never implemented. In result, if anybody ever put a probe on any of these instructions the result would have been random behaviour after the instruction got executed within the insn slot. So lets add the missing handling for these instructions. Since all of the new instructions have 32 bit signed displacement the easiest solution is to allocate an insn slot that is within the same 2GB area like the original instruction and patch the displacement field. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
The current two insn slot caches both use module_alloc/module_free to allocate and free insn slot cache pages. For s390 this is not sufficient since there is the need to allocate insn slots that are either within the vmalloc module area or within dma memory. Therefore add a mechanism which allows to specify an own allocator for an own insn slot cache. Signed-off-by:
-
Heiko Carstens authored
The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: -
Jean Delvare authored
As reported by Joe Perches: OOM messages generally aren't useful. dmi_alloc is either a trivial front-end to kzalloc, and kzalloc already does a dump_stack() when OOM, or for x86, dmi_alloc uses extend_brk which BUGs when unsuccessful. So we can remove all 6 such log messages in the dmi_scan driver, to shrink the binary size (by 528 bytes on x86_64.) Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reported-by:
Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Jean Delvare authored
Add const to all DMI string pointers where this is possible. This fixes a checkpatch warning. Signed-off-by:
-
Jean Delvare authored
Fix all errors and trivial warnings reported by checkpatch for file drivers/firmware/dmi_scan.c. Signed-off-by:
-
