- 14 Oct, 2019 12 commits
-
-
Lionel Landwerlin authored
We would like to make use of perf in Vulkan. The Vulkan API is much lower level than OpenGL, with applications directly exposed to the concept of command buffers (pretty much equivalent to our batch buffers). In Vulkan, queries are always limited in scope to a command buffer. In OpenGL, the lack of command buffer concept meant that queries' duration could span multiple command buffers. With that restriction gone in Vulkan, we would like to simplify measuring performance just by measuring the deltas between the counter snapshots written by 2 MI_RECORD_PERF_COUNT commands, rather than the more complex scheme we currently have in the GL driver, using 2 MI_RECORD_PERF_COUNT commands and doing some post processing on the stream of OA reports, coming from the global OA buffer, to remove any unrelated deltas in between the 2 MI_RECORD_PERF_COUNT. Disabling preemption only apply to a single context with which want to query performance counters for and is considered a privileged operation, by default protected by CAP_SYS_ADMIN. It is possible to enable it for a normal user by disabling the paranoid stream setting. v2: Store preemption setting in intel_context (Chris) v3: Use priorities to avoid preemption rather than the HW mechanism v4: Just modify the port priority reporting function v5: Add nopreempt flag on gem context and always flag requests appropriately, regarless of OA reconfiguration. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932Signed-off-by:Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
Introduce a new perf_ioctl command to change the OA configuration of the active stream. This allows the OA stream to be reconfigured between batch buffers, giving greater flexibility in sampling. We inject a request into the OA context to reconfigure the stream asynchronously on the GPU in between and ordered with execbuffer calls. Original patch for dynamic reconfiguration by Lionel Landwerlin. Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932Signed-off-by:
-
Lionel Landwerlin authored
Listing configurations at the moment is supported only through sysfs. This might cause issues for applications wanting to list configurations from a container where sysfs isn't available. This change adds a way to query the number of configurations and their content through the i915 query uAPI. v2: Fix sparse warnings (Lionel) Add support to query configuration using uuid (Lionel) v3: Fix some inconsistency in uapi header (Lionel) Fix unlocking when not locked issue (Lionel) Add debug messages (Lionel) v4: Fix missing unlock (Dan) v5: Drop lock when copying config content to userspace (Chris) v6: Drop lock when copying config list to userspace (Chris) Fix deadlock when calling i915_perf_get_oa_config() under perf.metrics_lock (Lionel) Add i915_oa_config_get() (Chris) Link: https://gitlab.freedesktop.org/mesa/mesa/merge_requests/932Signed-off-by: -
Lionel Landwerlin authored
Reporting this version will help application figure out what level of the support the running kernel provides. v2: Add i915_perf_ioctl_version() (Chris) Signed-off-by:
-
Chris Wilson authored
We rely on only the tasklet being allowed to call into process_csb(), so assert that is locked when we do. As the tasklet uses a simple bitlock, there is no strong lockdep checking so we must make do with a plain assertion that the tasklet is running and assume that we are the tasklet! v2: Fixup intel_gt_sanitize() to prepare each engine for the reset so that the locks are marked as held during the reset v3: Check for existent function pointers for very early sanitisation. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191014121336.30137-1-chris@chris-wilson.co.uk
-
Vivek Kasireddy authored
On platforms that have the MCC PCH, Port C's hotplug interrupt bits are mapped to TC1 bits. Suggested-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by:
-
Ville Syrjälä authored
The first come first served apporoach to handling the VBT child device AUX ch conflicts has backfired. We have machines in the wild where the VBT specifies both port A eDP and port E DP (in that order) with port E being the real one. So let's try to flip the preference around and let the last child device win once again. Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
Masami Ichikawa <masami256@gmail.com> Tested-by:
Torsten <freedesktop201910@liggy.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966 Fixes: 36a0f920 ("drm/i915/bios: make child device order the priority order") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.comAcked-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
Since commit e2144503 ("drm/i915: Prevent bonded requests from overtaking each other on preemption") we have restricted requests to run on their chosen engine across preemption events. We can take this restriction into account to know that we will want to resubmit those requests onto the same physical engine, and so can shortcircuit the virtual engine selection process and keep the request on the same engine during unwind. References: e2144503 ("drm/i915: Prevent bonded requests from overtaking each other on preemption") Signed-off-by:
Ramlingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191013203012.25208-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We want the general purpose registers to be clear in all new contexts so that we can be confident that no information is leaked from one to the next. Signed-off-by:
-
Chris Wilson authored
Check the logical ring context by asserting that the registers hold expected start during execution. (It's a bit chicken-and-egg for how could we manage to execute our request if the registers were not being updated. Still, it's nice to verify that the HW is working as expected.) Signed-off-by:
-
Chris Wilson authored
Just a parameter rename, drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Function parameter or member '_new_plane_state' not described in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/display/intel_display.c:14425: warning: Excess function parameter 'new_state' description in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Function parameter or member '_old_plane_state' not described in 'intel_cleanup_plane_fb' drivers/gpu/drm/i915/display/intel_display.c:14534: warning: Excess function parameter 'old_state' description in 'intel_cleanup_plane_fb' Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_memory_region.o: in function `igt_mock_contiguous': drivers/gpu/drm/i915/selftests/intel_memory_region.c:166: undefined reference to `__umoddi3' v2: promote target to u64 for consistency across all builds Reported-by:
kbuild test robot <lkp@intel.com> Fixes: 2f0b97ca ("drm/i915/region: support contiguous allocations") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191013114509.3405-1-chris@chris-wilson.co.uk
-
- 13 Oct, 2019 1 commit
-
-
Chris Wilson authored
Use a local variable to track the allocation errors to avoid polluting the struct and keep the free simple. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 12 Oct, 2019 7 commits
-
-
Chris Wilson authored
When we are watching a particular context, we want the OA config to be applied inline with that context such that it takes effect before the next submission. Signed-off-by:
-
Lionel Landwerlin authored
We haven't run into issues with programming the global OA/NOA registers configuration from CPU so far, but HW engineers actually recommend doing this from the command streamer. On TGL in particular one of the clock domain in which some of that programming goes might not be powered when we poke things from the CPU. Since we have a command buffer prepared for the execbuffer side of things, we can reuse that approach here too. This also allows us to significantly reduce the amount of time we hold the main lock. v2: Drop the global lock as much as possible v3: Take global lock to pin global v4: Create i915 request in emit_oa_config() to avoid deadlocks (Lionel) v5: Move locking to the stream (Lionel) v6: Move active reconfiguration request into i915_perf_stream (Lionel) v7: Pin VMA outside request creation (Chris) Lock VMA before move to active (Chris) v8: Fix double free on stream->initial_oa_config_bo (Lionel) Don't allow interruption when waiting on active config request (Lionel) Signed-off-by: -
Lionel Landwerlin authored
NOA configuration take some amount of time to apply. That amount of time depends on the size of the GT. There is no documented time for this. For example, past experimentations with powergating configuration changes seem to indicate a 60~70us delay. We go with 500us as default for now which should be over the required amount of time (according to HW architects). v2: Don't forget to save/restore registers used for the wait (Chris) v3: Name used CS_GPR registers (Chris) Fix compile issue due to rebase (Lionel) v4: Fix save/restore helpers (Umesh) v5: Move noa_wait from drm_i915_private to i915_perf_stream (Lionel) v6: Add missing struct declarations in i915_perf.h Signed-off-by: -
Lionel Landwerlin authored
Here we introduce a mechanism by which the execbuf part of the i915 driver will be able to request that a batch buffer containing the programming for a particular OA config be created. We'll execute these OA configuration buffers right before executing a set of userspace commands so that a particular user batchbuffer be executed with a given OA configuration. This mechanism essentially allows the userspace driver to go through several OA configuration without having to open/close the i915/perf stream. v2: No need for locking on object OA config object creation (Chris) Flush cpu mapping of OA config (Chris) v3: Properly deal with the perf_metric lock (Chris/Lionel) v4: Fix oa config unref/put when not found (Lionel) v5: Allocate BOs for configurations on the stream instead of globally (Lionel) v6: Fix 64bit division (Chris) v7: Store allocated config BOs into the stream (Lionel) Signed-off-by: -
Chris Wilson authored
Sometimes we want to emit a terminator request, a request that flushes the pipeline and allows no request to come after it. This can be used for a "preempt-to-idle" to ensure that upon processing the context-switch to that request, all other active contexts have been flushed. Signed-off-by:
-
Chris Wilson authored
We set out-of-bound parameters inside the i915_requests.flags field, such as disabling preemption or marking the end-of-context. We should not coalesce consecutive requests if they have differing instructions as we only inspect the last active request in a context. Thus if we allow a later request to be merged into the same execution context, it will mask any of the earlier flags. References: 2a98f4e6 ("drm/i915: add infrastructure to hold off preemption on a request") Signed-off-by:
-
Chris Wilson authored
As we now have a specific engine to use OA on, exchange the top-level runtime-pm wakeref with the engine-pm. This still results in the same top-level runtime-pm, but with more nuances to keep the engine and its gt awake. Signed-off-by:
-
- 11 Oct, 2019 5 commits
-
-
Chris Wilson authored
Add the missing serialisation on the request for a write into a vma to wait until that vma is bound before being executed by the GPU. Signed-off-by:
-
Chris Wilson authored
Sometimes a test has to wait for RCU to complete a grace period and perform its callbacks, for example waiting for a close(fd) to actually perform the fput(filp) and so trigger all the callbacks such as closing GEM contexts. There is no trivial means of triggering an RCU barrier from userspace, so add one for our convenience in debugfs/i915_drop_caches Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191011173823.20432-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Only the requests that have not completed do we want to change the status of to signal the -EIO when cancelling the inflight set of requests upon wedging. Reported-by:
-
Chris Wilson authored
Before we BUG out with bad pending state, leave a telltale as to which test failed. Signed-off-by:
-
Chris Wilson authored
Since writing the comment that the scheduler is entirely passive, we've added minimal timeslicing which adds the most primitive of active elements (a timeout and reschedule). Signed-off-by:
-
- 10 Oct, 2019 14 commits
-
-
James Ausmus authored
Starting from TGL, we now need to read the SAGV block time via a PCODE mailbox, rather than having a static value. BSpec: 49326 v2: Fix up pcode val data type (Ville), tighten variable scope (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004221449.1317-2-james.ausmus@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20191009172315.11004-2-lucas.demarchi@intel.com
-
James Ausmus authored
In prep for newer platforms having more complicated ways to determine the SAGV block time, move the variable to dev_priv, and extract the setting to an initial setup function. While we're at it, update the if ladder to follow the new gen -> old gen order preference, and warn on any non-specified gen. v2: Shorten the function name (Ville), return directly (Ville), move sagv_block_time_us value to dev_priv (Ville) v3: Change sagv_block_time_us to u32 (Lucas), Change fallback value to -1 (Lucas), use intel_has_sagv for setup check rather than hand-rolling (Lucas) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Chris Wilson authored
Now that we have the engine stored in i915_perf, we have a means of accessing intel_gt should we require it. However, we are currently only using the intel_gt to find the right intel_uncore, so replace our i915_perf.gt pointer with the more useful i915_perf.uncore. Signed-off-by:
-
Lionel Landwerlin authored
We'll use this information later to verify that a client trying to reconfigure the stream does so on the right engine. For now, we want to pull the knowledge of which engine we use into a central property. Signed-off-by:
-
Maarten Lankhorst authored
We have a src and dect rectangle, use it instead of relying on the core drm properties. Because the core by default clips the src/dst properties, after the drm_atomic_helper_check_plane_state() we manually set the unclipped src/dst rectangles. We still need the call for visibility checks, but this way we are able to use the src/dst rects in the check/commit code. This removes the special case in the watermark code for cursor w/h. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004113514.17064-5-maarten.lankhorst@linux.intel.comReviewed-by:
-
Maarten Lankhorst authored
This can all be done from the intel_update_crtc function. Split out the pipe update into a separate function, just like is done for the planes. Pull in all the changes done during fastset as well. It makes no sense for it to still exist as a separate function. Changes since v1: - Inline intel_update_pipe_config() Changes since v2: - Add comments suggested by matt. - Reorder commit_pipe_config() to remove all nesting. (Ville, Matt) - Use intel_set_pipe_src_size((). (Matt) Changes since v3: - Move atomic_update_watermarks closer to the plane calls. Signed-off-by:
-
Maarten Lankhorst authored
We need to look at the hw fb in the plane split, so replace all the places that use drm_plane_state with intel_plane_state. Signed-off-by:
-
Maarten Lankhorst authored
Instead of looking at drm_plane_state, look at intel_plane_state directly. This will allow us to make the watermarks bigjoiner aware, when we make it work for bigjoiner slave pipes as well. Signed-off-by:
-
Maarten Lankhorst authored
Using for_each_intel_plane_mask() fails because of an extra bracket, remove the bracket so we can use it in the next commit. Signed-off-by:
-
Chris Wilson authored
Make sure that we copy across the registers from one engine to the next, as we hop around a virtual engine. Signed-off-by:
-
Chris Wilson authored
Move the BUG_ON around slightly and add some explanations for each to try and capture the expected state more carefully. We want to compare the expected active state of our bookkeeping as compared to the tracked HW state. References: https://bugs.freedesktop.org/show_bug.cgi?id=111937Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010083242.1387-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we have a wedged GPU that we need to recover, but fail, add a taint for CI to pickup and schedule a reboot. Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002160034.5121-1-chris@chris-wilson.co.uk
-
Daniele Ceraolo Spurio authored
There are small differences between the blitter and the video engines in the xcs context image (e.g. registers 0x200 and 0x204 only exist on the blitter). Since we never explicitly set a value for those register and given that we don't need to update the offsets in the lrc image when we change engine within the class for virtual engine because the HW can handle that, instead of having a separate define for the BCS we can just restrict the programming to the part we're interested in, which is common across the engines. Bspec: 45584 Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
The specs don't mention any specific HW limitation on the blitter and manual inspection shows that the HW does set the relative MMIO bit in the LRI of the blitter context image, so we can remove our limitations. Signed-off-by:
-
- 09 Oct, 2019 1 commit
-
-
Chris Wilson authored
The active/pending execlists is no longer protected by the engine->active.lock, but is serialised by the tasklet instead. Update the locking around the debug and stats to follow suit. v2: local_bh_disable() to prevent recursing into the tasklet in case we trigger a softirq (Tvrtko) Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
