- 12 Sep, 2012 40 commits
-
-
J. Bruce Fields authored
commit d10f27a7 upstream. The rpc server tries to ensure that there will be room to send a reply before it receives a request. It does this by tracking, in xpt_reserved, an upper bound on the total size of the replies that is has already committed to for the socket. Currently it is adding in the estimate for a new reply *before* it checks whether there is space available. If it finds that there is not space, it then subtracts the estimate back out. This may lead the subsequent svc_xprt_enqueue to decide that there is space after all. The results is a svc_recv() that will repeatedly return -EAGAIN, causing server threads to loop without doing any actual work. Reported-by:
Michael Tokarev <mjt@tls.msk.ru> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
J. Bruce Fields authored
commit f06f00a2 upstream. svc_tcp_sendto sets XPT_CLOSE if we fail to transmit the entire reply. However, the XPT_CLOSE won't be acted on immediately. Meanwhile other threads could send further replies before the socket is really shut down. This can manifest as data corruption: for example, if a truncated read reply is followed by another rpc reply, that second reply will look to the client like further read data. Symptoms were data corruption preceded by svc_tcp_sendto logging something like kernel: rpc-srv/tcp: nfsd: sent only 963696 when sending 1048708 bytes - shutting down socket Reported-by:
Malahal Naineni <malahal@us.ibm.com> Tested-by:
-
J. Bruce Fields authored
commit be1e4444 upstream. Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if sk_tcplen would lead us to expect n pages of data). svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen. This is OK, since both functions are serialized by XPT_BUSY. However, that means the inconsistency must be repaired before dropping XPT_BUSY. Therefore we should be ensuring that svc_tcp_save_pages repairs the problem before exiting svc_tcp_recv_record on error. Symptoms were a BUG() in svc_tcp_clear_pages. Signed-off-by:
-
Al Viro authored
commit 0e665d5d upstream. compat_sys_{read,write}v() need the same "pass a copy of file->f_pos" thing as sys_{read,write}{,v}(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
commit 08660043 upstream. If the rpc call to NFS3PROC_FSINFO fails, then we need to report that error so that the mount fails. Otherwise we can end up with a superblock with completely unusable values for block sizes, maxfilesize, etc. Reported-by:
Yuanming Chen <hikvision_linux@163.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Alex Deucher authored
commit c61e2775 upstream. There are systems that use ATRM, but not ATPX. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41265 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dave Airlie authored
commit de47a9cd upstream. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45503 Reported-and-Debugged-by: mlambda@gmail.com Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Igor Murzov authored
commit 211fa4fc upstream. Return a number of bytes read in radeon_atrm_get_bios_chunk() and properly check this value in radeon_atrm_get_bios(). If radeon_atrm_get_bios_chunk() read less bytes then were requested, it means that it finished reading bios data. Prior to this patch, condition in radeon_atrm_get_bios() was always equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false, thus radeon_atrm_get_bios() was trying to read past the bios data wasting boot time. On my lenovo ideapad u455 laptop this patch drops bios reading time from ~5.5s to ~1.5s. Signed-off-by:
Igor Murzov <e-mail@date.by> Reviewed-by:
-
Igor Murzov authored
commit a3f83ab1 upstream. At a boot time I observed following bug: BUG: unable to handle kernel paging request at ffff8800a4244000 IP: [<ffffffff81275b5b>] memcpy+0xb/0x120 PGD 1816063 PUD 1fe7d067 PMD 1ff9f067 PTE 80000000a4244160 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+) mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc loop btrfs Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046 /AMD CRB RIP: 0010:[<ffffffff81275b5b>] [<ffffffff81275b5b>] memcpy+0xb/0x120 RSP: 0018:ffff8800aa72db00 EFLAGS: 00010246 RAX: ffff8800a4150000 RBX: 0000000000001000 RCX: 0000000000000087 RDX: 0000000000000000 RSI: ffff8800a4244000 RDI: ffff8800a4150bc8 RBP: ffff8800aa72db78 R08: 0000000000000010 R09: ffffffff8174bbec R10: ffffffff812ee010 R11: 0000000000000001 R12: 0000000000001000 R13: 0000000000010000 R14: ffff8800a4140000 R15: ffff8800aaba1800 FS: 00007ff9a3bd4720(0000) GS:ffff8800afa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8800a4244000 CR3: 00000000a9c18000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1008, threadinfo ffff8800aa72c000, task ffff8800aa0e4000) Stack: ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28 ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020 ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000 Call Trace: [<ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon] [<ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0 [<ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon] [<ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon] [<ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon] [<ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon] [<ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm] [<ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon] [<ffffffff81296c5f>] local_pci_probe+0x5f/0xd0 [<ffffffff81297418>] pci_device_probe+0x88/0xb0 [<ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff813418d8>] really_probe+0x68/0x180 [<ffffffff81341be5>] driver_probe_device+0x45/0x70 [<ffffffff81341cb3>] __driver_attach+0xa3/0xb0 [<ffffffff81341c10>] ? driver_probe_device+0x70/0x70 [<ffffffff813400ce>] bus_for_each_dev+0x5e/0x90 [<ffffffff8134172e>] driver_attach+0x1e/0x20 [<ffffffff81341298>] bus_add_driver+0xc8/0x280 [<ffffffff813422c6>] driver_register+0x76/0x140 [<ffffffff812976d6>] __pci_register_driver+0x66/0xe0 [<ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm] [<ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60 [<ffffffffa0229000>] ? 0xffffffffa0228fff [<ffffffffa02290ec>] radeon_init+0xec/0xee [radeon] [<ffffffff810002f2>] do_one_initcall+0x42/0x180 [<ffffffff8109d8d2>] sys_init_module+0x92/0x1e0 [<ffffffff815407a9>] system_call_fastpath+0x16/0x1b Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c RIP [<ffffffff81275b5b>] memcpy+0xb/0x120 RSP <ffff8800aa72db00> CR2: ffff8800a4244000 ---[ end trace fcffa1599cf56382 ]--- Call to acpi_evaluate_object() not always returns 4096 bytes chunks, on my system it can return 2048 bytes chunk, so pass the length of retrieved chunk to memcpy(), not the length of the recieving buffer. Signed-off-by:
-
Alex Deucher authored
commit 7c3906d0 upstream. Allows us to verify the table size. Signed-off-by:
-
Alex Deucher authored
commit 4f81f986 upstream. We need it in the radeon drm module to fetch and verify the vbios image on UEFI systems. Signed-off-by:
-
David Lamparter authored
commit 268ba0a9 upstream. This is required for pure UEFI systems. The vbios is stored in ACPI rather than at the legacy vga location. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26891 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Tvrtko Ursulin authored
commit 52e9b39d upstream. There is a more recent APU stepping with a new PCI ID shipping in the same board by Fujitsu which needs the same quirk to correctly mark the back plane connectors. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
-
Alex Deucher authored
commit bf68adb4 upstream. Signed-off-by:
-
Amerigo Wang authored
commit 72d3eb13 upstream. This netconsole_target_put() is obviously redundant, and it causes a kernel segfault when removing a bridge device which has netconsole running on it. This is caused by: commit 8d8fc29d Author: Amerigo Wang <amwang@redhat.com> Date: Thu May 19 21:39:10 2011 +0000 netpoll: disable netpoll when enslave a device Cc: David Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Henningsson authored
commit c41999a2 upstream. It's possible that these amps are settable somehow, e g through secret codec verbs, but for now, don't create the controls (as they won't be working anyway, and cause errors in amixer). BugLink: https://bugs.launchpad.net/bugs/1038651Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mel Gorman authored
commit 67a806d9 upstream. The following build error occurred during an alpha build: net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Acked-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Michael Cree authored
commit a2fa3ccd upstream. Currently we export SOCK_NONBLOCK to user space but that conflicts with the definition from glibc leading to compilation errors in user programs (e.g. see Debian bug #658460). The generic socket.h restricts the definition of SOCK_NONBLOCK to the kernel, as does the MIPS specific socket.h, so let's do the same on Alpha. Signed-off-by:
-
Sven Schnelle authored
commit 99f347ca upstream. If a device specifies zero endpoints in its interface descriptor, the kernel oopses in acm_probe(). Even though that's clearly an invalid descriptor, we should test wether we have all endpoints. This is especially bad as this oops can be triggered by just plugging a USB device in. Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 83957df2 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
Bjørn Mork <bjorn@mork.no> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 43a34695 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
Greg Kroah-Hartman authored
commit 4d088876 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
Greg Kroah-Hartman authored
commit a3433179 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
Greg Kroah-Hartman authored
commit b9c4167c upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
Greg Kroah-Hartman authored
commit e694d518 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
Greg Kroah-Hartman authored
commit d04dbd1c upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
Mark Brown authored
commit ccf79584 upstream. Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by:
Christop Fritz <chf.fritz@googlemail.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 58a34de7 upstream. The power.deferred_resume can only be set if the runtime PM status of device is RPM_SUSPENDING and it should be cleared after its status has been changed, regardless of whether or not the runtime suspend has been successful. However, it only is cleared on suspend failure, while it may remain set on successful suspend and is happily leaked to rpm_resume() executed in that case. That shouldn't happen, so if power.deferred_resume is set in rpm_suspend() after the status has been changed to RPM_SUSPENDED, clear it before calling rpm_resume(). Then, it doesn't need to be cleared before changing the status to RPM_SUSPENDING any more, because it's always cleared after the status has been changed to either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Rafael J. Wysocki authored
commit 7f321c26 upstream. For devices whose power.no_callbacks flag is set, rpm_resume() should return 1 if the device's parent is already active, so that the callers of pm_runtime_get() don't think that they have to wait for the device to resume (asynchronously) in that case (the core won't queue up an asynchronous resume in that case, so there's nothing to wait for anyway). Modify the code accordingly (and make sure that an idle notification will be queued up on success, even if 1 is to be returned). Signed-off-by:
-
Theodore Ts'o authored
commit 0548bbb8 upstream. Commit 8aeb00ff: "ext4: fix overhead calculation used by ext4_statfs()" introduced a O(n**2) calculation which makes very large file systems take forever to mount. Fix this with an optimization for non-bigalloc file systems. (For bigalloc file systems the overhead needs to be set in the the superblock.) Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Yi Zou authored
commit d0e27c88 upstream. I am hitting this bug when the target is low in memory that fails the alloc_page() for the newly submitted command. This is a sort of off-by-one bug causing NULL pointer dereference in __free_page() since 'i' here is really the counter of total pages that have been successfully allocated here. Signed-off-by:
Yi Zou <yi.zou@intel.com> Cc: Andy Grover <agrover@redhat.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Open-FCoE.org <devel@open-fcoe.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
bjschuma@gmail.com authored
commit 425e776d upstream. This allows distros to remove the line from their modprobe configuration. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
-
NeilBrown authored
commit 667a5313 upstream. commit 27a7b260 md: Fix handling for devices from 2TB to 4TB in 0.90 metadata. changed 0.90 metadata handling to truncated size to 4TB as that is all that 0.90 can record. However for RAID0 and Linear, 0.90 doesn't need to record the size, so this truncation is not needed and causes working arrays to become too small. So avoid the truncation for RAID0 and Linear This bug was introduced in 3.1 and is suitable for any stable kernels from then onwards. As the offending commit was tagged for 'stable', any stable kernel that it was applied to should also get this patch. That includes at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for providing that list). Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Mathias Krause authored
commit 276bdb82 upstream. ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with a NULL ccid pointer leading to a NULL pointer dereference. This could lead to a privilege escalation if the attacker is able to map page 0 and prepare it with a fake ccid_ops pointer. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Bart Van Assche authored
commit 22032991 upstream. Avoid a crash caused by the scmnd->scsi_done(scmnd) call in srp_process_rsp() being invoked with scsi_done == NULL. This can happen if a reply is received during or after a command abort. Reported-by:
Joseph Glanville <joseph.glanville@orionvm.com.au> Reference: http://marc.info/?l=linux-rdma&m=134314367801595Acked-by:
David Dillow <dillowda@ornl.gov> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 0b68c8e2 upstream. Commit dbf0e4c7 (PCI: EHCI: fix crash during suspend on ASUS computers) added a workaround for an ASUS suspend issue related to USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut down the EHCI controller during system suspend if its PCI command register doesn't contain 0 at that time. It turns out that the same workaround is necessary in the analogous hibernation code path, so add it. References: https://bugzilla.kernel.org/show_bug.cgi?id=45811Reported-and-tested-by:
Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Miklos Szeredi authored
commit e68726ff upstream. Userspace can pass weird create mode in open(2) that we canonicalize to "(mode & S_IALLUGO) | S_IFREG" in vfs_create(). The problem is that we use the uncanonicalized mode before calling vfs_create() with unforseen consequences. So do the canonicalization early in build_open_flags(). Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Tested-by:
Richard W.M. Jones <rjones@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit a2140fc0 upstream. Refcounting of fsnotify_mark in audit tree is broken. E.g: refcount create_chunk alloc_chunk 1 fsnotify_add_mark 2 untag_chunk fsnotify_get_mark 3 fsnotify_destroy_mark audit_tree_freeing_mark 2 fsnotify_put_mark 1 fsnotify_put_mark 0 via destroy_list fsnotify_mark_destroy -1 This was reported by various people as triggering Oops when stopping auditd. We could just remove the put_mark from audit_tree_freeing_mark() but that would break freeing via inode destruction. So this patch simply omits a put_mark after calling destroy_mark or adds a get_mark before. The additional get_mark is necessary where there's no other put_mark after fsnotify_destroy_mark() since it assumes that the caller is holding a reference (or the inode is keeping the mark pinned, not the case here AFAICS). Signed-off-by:
Valentin Avram <aval13@gmail.com> Reported-by:
Peter Moody <pmoody@google.com> Acked-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 0fe33aae upstream. Don't do free_chunk() after fsnotify_add_mark(). That one does a delayed unref via the destroy list and this results in use-after-free. Signed-off-by:
-
Daniel Vetter authored
commit 35a38556 upstream. eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671Tested-by:
Roberto Romer <sildurin@gmail.com> Tested-by:
Daniel Wagner <wagi@monom.org> Tested-by:
Keith Packard <keithp@keithp.com> Cc: Keith Packard <keithp@keithp.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
