PEBS_REGS used as mask for the supported registers for large PEBS.
However, the mask cannot filter the sample_regs_user/sample_regs_intr
correctly.

(1ULL << PERF_REG_X86_*) should be used to replace PERF_REG_X86_*, which
is only the index.

Rename PEBS_REGS to PEBS_GP_REGS, because the mask is only for general
purpose registers.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Fixes: 2fe1bc1f ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Link: https://lkml.kernel.org/r/20190402194509.2832-2-kan.liang@linux.intel.com
[ Renamed it to PEBS_GP_REGS - as 'GPRS' is used elsewhere ;-) ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The following commit:

  1627314f ("perf: Suppress AUX/OVERWRITE records")

has an unintended side-effect of also suppressing all AUX records with no flags
and non-zero size, so all the regular records in the full trace mode.
This breaks some use cases for people.

Fix this by restoring "regular" AUX records.
Reported-by: Ben Gainey <Ben.Gainey@arm.com>
Tested-by: Ben Gainey <Ben.Gainey@arm.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 1627314f ("perf: Suppress AUX/OVERWRITE records")
Link: https://lkml.kernel.org/r/20190329091338.29999-1-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The following recent commit:

  c60f83b8 ("perf, pt, coresight: Fix address filters for vmas with non-zero offset")

changes the address filtering logic to communicate filter ranges to the PMU driver
via a single address range object, instead of having the driver do the final bit of
math.

That change forgets to take into account kernel filters, which are not calculated
the same way as DSO based filters.

Fix that by passing the kernel filters the same way as file-based filters.
This doesn't require any additional changes in the drivers.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: c60f83b8 ("perf, pt, coresight: Fix address filters for vmas with non-zero offset")
Link: https://lkml.kernel.org/r/20190329091212.29870-1-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The following commit introduced a bug in one of our error paths:

  819319fc ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()")

it missed to handle the return value of kprobe_optready() as
error-value. In reality, the kprobe_optready() returns a bool
result, so "true" case must be passed instead of 0.

This causes some errors on kprobe boot-time selftests on ARM:

 [   ] Beginning kprobe tests...
 [   ] Probe ARM code
 [   ]     kprobe
 [   ]     kretprobe
 [   ] ARM instruction simulation
 [   ]     Check decoding tables
 [   ]     Run test cases
 [   ] FAIL: test_case_handler not run
 [   ] FAIL: Test andge	r10, r11, r14, asr r7
 [   ] FAIL: Scenario 11
 ...
 [   ] FAIL: Scenario 7
 [   ] Total instruction simulation tests=1631, pass=1433 fail=198
 [   ] kprobe tests failed

This can happen if an optimized probe is unregistered and next
kprobe is registered on same address until the previous probe
is not reclaimed.

If this happens, a hidden aggregated probe may be kept in memory,
and no new kprobe can probe same address. Also, in that case
register_kprobe() will return "1" instead of minus error value,
which can mislead caller logic.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v5.0+
Fixes: 819319fc ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()")
Link: http://lkml.kernel.org/r/155530808559.32517.539898325433642204.stgit@devnote2Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull libnvdimm fixes from Dan Williams:
 "I debated holding this back for the v5.2 merge window due to the size
  of the "zero-key" changes, but affected users would benefit from
  having the fixes sooner. It did not make sense to change the zero-key
  semantic in isolation for the "secure-erase" command, but instead
  include it for all security commands.

  The short background on the need for these changes is that some NVDIMM
  platforms enable security with a default zero-key rather than let the
  OS specify the initial key. This makes the security enabling that
  landed in v5.0 unusable for some users.

  Summary:

   - Compatibility fix for nvdimm-security implementations with a
     default zero-key.

   - Miscellaneous small fixes for out-of-bound accesses, cleanup after
     initialization failures, and missing debug messages"

* tag 'libnvdimm-fixes-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  tools/testing/nvdimm: Retain security state after overwrite
  libnvdimm/pmem: fix a possible OOB access when read and write pmem
  libnvdimm/security, acpi/nfit: unify zero-key for all security commands
  libnvdimm/security: provide fix for secure-erase to use zero-key
  libnvdimm/btt: Fix a kmemdup failure check
  libnvdimm/namespace: Fix a potential NULL pointer dereference
  acpi/nfit: Always dump _DSM output payload

Pull fsdax fix from Dan Williams:
 "A single filesystem-dax fix. It has been lingering in -next for a long
  while and there are no other fsdax fixes on the horizon:

   - Avoid a crash scenario with architectures like powerpc that require
     'pgtable_deposit' for the zero page"

* tag 'fsdax-fix-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  fs/dax: Deposit pagetable even when installing zero page

Merge page ref overflow branch.

Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).

Admittedly it's not exactly easy.  To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers.  Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).

Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication.  So let's just do that.

* branch page-refs:
  fs: prevent page refcount overflow in pipe_buf_get
  mm: prevent get_user_pages() from overflowing page refcount
  mm: add 'try_get_page()' helper function
  mm: make page ref count overflow check tighter and more explicit

Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount.  All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the page refcount wraps around past zero, it will be freed while
there are still four billion references to it.  One of the possible
avenues for an attacker to try to make this happen is by doing direct IO
on a page multiple times.  This patch makes get_user_pages() refuse to
take a new page reference if there are already more than two billion
references to the page.
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the same as the traditional 'get_page()' function, but instead
of unconditionally incrementing the reference count of the page, it only
does so if the count was "safe".  It returns whether the reference count
was incremented (and is marked __must_check, since the caller obviously
has to be aware of it).

Also like 'get_page()', you can't use this function unless you already
had a reference to the page.  The intent is that you can use this
exactly like get_page(), but in situations where you want to limit the
maximum reference count.

The code currently does an unconditional WARN_ON_ONCE() if we ever hit
the reference count issues (either zero or negative), as a notification
that the conditional non-increment actually happened.

NOTE! The count access for the "safety" check is inherently racy, but
that doesn't matter since the buffer we use is basically half the range
of the reference count (ie we look at the sign of the count).
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have a VM_BUG_ON() to check that the page reference count doesn't
underflow (or get close to overflow) by checking the sign of the count.

That's all fine, but we actually want to allow people to use a "get page
ref unless it's already very high" helper function, and we want that one
to use the sign of the page ref (without triggering this VM_BUG_ON).

Change the VM_BUG_ON to only check for small underflows (or _very_ close
to overflowing), and ignore overflows which have strayed into negative
territory.
Acked-by: Matthew Wilcox <willy@infradead.org>
Cc: Jann Horn <jannh@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "Set of fixes that should go into this round. This pull is larger than
  I'd like at this time, but there's really no specific reason for that.
  Some are fixes for issues that went into this merge window, others are
  not. Anyway, this contains:

   - Hardware queue limiting for virtio-blk/scsi (Dongli)

   - Multi-page bvec fixes for lightnvm pblk

   - Multi-bio dio error fix (Jason)

   - Remove the cache hint from the io_uring tool side, since we didn't
     move forward with that (me)

   - Make io_uring SETUP_SQPOLL root restricted (me)

   - Fix leak of page in error handling for pc requests (Jérôme)

   - Fix BFQ regression introduced in this merge window (Paolo)

   - Fix break logic for bio segment iteration (Ming)

   - Fix NVMe cancel request error handling (Ming)

   - NVMe pull request with two fixes (Christoph):
       - fix the initial CSN for nvme-fc (James)
       - handle log page offsets properly in the target (Keith)"

* tag 'for-linus-20190412' of git://git.kernel.dk/linux-block:
  block: fix the return errno for direct IO
  nvmet: fix discover log page when offsets are used
  nvme-fc: correct csn initialization and increments on error
  block: do not leak memory in bio_copy_user_iov()
  lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs
  nvme: cancel request synchronously
  blk-mq: introduce blk_mq_complete_request_sync()
  scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
  virtio-blk: limit number of hw queues by nr_cpu_ids
  block, bfq: fix use after free in bfq_bfqq_expire
  io_uring: restrict IORING_SETUP_SQPOLL to root
  tools/io_uring: remove IOCQE_FLAG_CACHEHIT
  block: don't use for-inside-for in bio_for_each_segment_all

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fix:

   - Fix a deadlock in close() due to incorrect draining of RDMA queues

  Bugfixes:

   - Revert "SUNRPC: Micro-optimise when the task is known not to be
     sleeping" as it is causing stack overflows

   - Fix a regression where NFSv4 getacl and fs_locations stopped
     working

   - Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.

   - Fix xfstests failures due to incorrect copy_file_range() return
     values"

* tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"
  NFSv4.1 fix incorrect return value in copy_file_range
  xprtrdma: Fix helper that drains the transport
  NFS: Fix handling of reply page vector
  NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.

Pull SCSI fix from James Bottomley:
 "One obvious fix for a ciostor data corruption on error bug"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: csiostor: fix missing data copy in csio_scsi_err_handler()

Pull clk fixes from Stephen Boyd:
 "Here's more than a handful of clk driver fixes for changes that came
  in during the merge window:

   - Fix the AT91 sama5d2 programmable clk prescaler formula

   - A bunch of Amlogic meson clk driver fixes for the VPU clks

   - A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc
     clks as critical only when really needed

   - Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
     implementation

   - Use the right structure to test for a frequency table in i.MX's
     PLL_1416x driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx: Fix PLL_1416X not rounding rates
  clk: mediatek: fix clk-gate flag setting
  platform/x86: pmc_atom: Drop __initconst on dmi table
  clk: x86: Add system specific quirk to mark clocks as critical
  clk: meson: vid-pll-div: remove warning and return 0 on invalid config
  clk: meson: pll: fix rounding and setting a rate that matches precisely
  clk: meson-g12a: fix VPU clock parents
  clk: meson: g12a: fix VPU clock muxes mask
  clk: meson-gxbb: round the vdec dividers to closest
  clk: at91: fix programmable clock for sama5d2

Pull PCI fixes from Bjorn Helgaas:

 - Add a DMA alias quirk for another Marvell SATA device (Andre
   Przywara)

 - Fix a pciehp regression that broke safe removal of devices (Sergey
   Miroshnichenko)

* tag 'pci-v5.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: pciehp: Ignore Link State Changes after powering off a slot
  PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller

Pull powerpc fixes from Michael Ellerman:
 "A minor build fix for 64-bit FLATMEM configs.

  A fix for a boot failure on 32-bit powermacs.

  My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on
  64-bit kernels, ie. compat mode, which is only used on big endian.

  The rewrite of the SLB code we merged in 4.20 missed the fact that the
  0x380 exception is also used with the Radix MMU to report out of range
  accesses. This could lead to an oops if userspace tried to read from
  addresses outside the user or kernel range.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas
  Piggin"

* tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs
  powerpc/64s/radix: Fix radix segment exception handling
  powerpc/vdso32: fix CLOCK_MONOTONIC on PPC64
  powerpc/32: Fix early boot failure with RTAS built-in

Pull arm64 fixes from Will Deacon:
 "The main thing is a fix to our FUTEX_WAKE_OP implementation which was
  unbelievably broken, but did actually work for the one scenario that
  GLIBC used to use.

  Summary:

   - Fix stack unwinding so we ignore user stacks

   - Fix ftrace module PLT trampoline initialisation checks

   - Fix terminally broken implementation of FUTEX_WAKE_OP atomics"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value
  arm64: backtrace: Don't bother trying to unwind the userspace stack
  arm64/ftrace: fix inadvertent BUG() in trampoline check

Pull x86 fixes from Ingo Molnar:
 "Fix typos in user-visible resctrl parameters, and also fix assembly
  constraint bugs that might result in miscompilation"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Use stricter assembly constraints in bitops
  x86/resctrl: Fix typos in the mba_sc mount option

Pull timer fix from Ingo Molnar:
 "Fix the alarm_timer_remaining() return value"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Return correct remaining time

Pull scheduler fix from Ingo Molnar:
 "Fix a NULL pointer dereference crash in certain environments"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Do not re-read ->h_load_next during hierarchical load calculation

Pull perf fixes from Ingo Molnar:
 "Six kernel side fixes: three related to NMI handling on AMD systems, a
  race fix, a kexec initialization fix and a PEBS sampling fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix perf_event_disable_inatomic() race
  x86/perf/amd: Remove need to check "running" bit in NMI handler
  x86/perf/amd: Resolve NMI latency issues for active PMCs
  x86/perf/amd: Resolve race condition when disabling PMC
  perf/x86/intel: Initialize TFA MSR
  perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS

Pull locking fix from Ingo Molnar:
 "Fixes a crash when accessing /proc/lockdep"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Zap lock classes even with lock debugging disabled

Pull irq fixes from Ingo Molnar:
 "Two genirq fixes, plus an irqchip driver error handling fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
  genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n
  irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()

Pull core fixes from Ingo Molnar:
 "Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
  bug"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Add rewind_stack_do_exit() to the noreturn list
  linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()

Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".

This breaks dynamic rate rounding for features such as cpufreq.

Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dc ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

CLK_SET_RATE_PARENT would be dropped.
Merge two flag setting together to correct the error.

Fixes: 5a1cc4c2 ("clk: mediatek: Add flags to mtk_gate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix a sparc64 sun4v_pci regression introduced in this merged window,
  and a dma-debug stracktrace regression from the big refactor last
  merge window"

* tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: only skip one stackframe entry
  sparc64/pci_sun4v: fix ATU checks for large DMA masks

Pull IOMMU fix from Joerg Roedel:
 "Fix an AMD IOMMU issue where the driver didn't correctly setup the
  exclusion range in the hardware registers, resulting in exclusion
  ranges being one page too big.

  This can cause data corruption of the address of that last page is
  used by DMA operations"

* tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Set exclusion range correctly

Pull clang-format update from Miguel Ojeda:
 "The usual roughly-per-release .clang-format macro list update"

* tag 'clang-format-for-linus-v5.1-rc5' of git://github.com/ojeda/linux:
  clang-format: Update with the latest for_each macro list

Pull MMC host fixes from Ulf Hansson:

 - alcor: Stabilize data write requests

 - sdhci-omap: Fix command error path during tuning

* tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
  mmc: alcor: don't write data before command has completed

Pull sound fixes from Takashi Iwai:
 "Well, this one became unpleasantly larger than previous pull requests,
  but it's a kind of usual pattern: now it contains a collection of ASoC
  fixes, and nothing to worry too much.

  The fixes for ASoC core (DAPM, DPCM, topology) are all small and just
  covering corner cases. The rest changes are driver-specific, many of
  which are for x86 platforms and new drivers like STM32, in addition to
  the usual fixups for HD-audio"

* tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (66 commits)
  ASoC: wcd9335: Fix missing regmap requirement
  ALSA: hda: Fix racy display power access
  ASoC: pcm: fix error handling when try_module_get() fails.
  ASoC: stm32: sai: fix master clock management
  ASoC: Intel: kbl: fix wrong number of channels
  ALSA: hda - Add two more machines to the power_save_blacklist
  ASoC: pcm: update module refcount if module_get_upon_open is set
  ASoC: core: conditionally increase module refcount on component open
  ASoC: stm32: fix sai driver name initialisation
  ASoC: topology: Use the correct dobj to free enum control values and texts
  ALSA: seq: Fix OOB-reads from strlcpy
  ASoC: intel: skylake: add remove() callback for component driver
  ASoC: cs35l35: Disable regulators on driver removal
  ALSA: xen-front: Do not use stream buffer size before it is set
  ASoC: rockchip: pdm: change dma burst to 8
  ASoC: rockchip: pdm: fix regmap_ops hang issue
  ASoC: simple-card: don't select DPCM via simple-audio-card
  ASoC: audio-graph-card: don't select DPCM via audio-graph-card
  ASoC: tlv320aic32x4: Change author's name
  ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
  ...

Pull ACPI fix from Rafael Wysocki:
 "Fix an ACPICA issue introduced during the 4.20 development cycle and
  causing some systems to crash because of leftover operation region
  data still maintained after the operation region in question has gone
  away (Erik Schmauss)"

* tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Namespace: remove address node from global list after method termination

Pull drm fixes from Dave Airlie:
 "Fixes across the driver spectrum this week, the mediatek fbdev support
  might be a bit late for this round, but I looked over it and it's not
  very large and seems like a useful feature for them.

  Otherwise the main thing is a regression fix for i915 5.0 bug that
  caused black screens on a bunch of Dell XPS 15s I think, I know at
  least Fedora is waiting for this to land, and the udl fix is also for
  a regression since 5.0 where unplugging the device would end badly.

  core:
   - make atomic hooks optional

  i915:
   - Revert a 5.0 regression where some eDP panels stopped working
   - DSI related fixes for platforms up to IceLake
   - GVT (regression fix, warning fix, use-after free fix)

  amdgpu:
   - Cursor fixes
   - missing PCI ID fix for KFD
   - XGMI fix
   - shadow buffer handling after reset fix

  udl:
   - fix unplugging device crashes.

  mediatek:
   - stabilise MT2701 HDMI support
   - fbdev support

  tegra:
   - fix for build regression in rc1.

  sun4i:
   - Allwinner A6 max freq improvements
   - null ptr deref fix

  dw-hdmi:
   - SCDC configuration improvements

  omap:
   - CEC clock management policy fix"

* tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm: (32 commits)
  gpu: host1x: Fix compile error when IOMMU API is not available
  drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
  drm/i915/dp: revert back to max link rate and lane count on eDP
  drm/i915/icl: Fix port disable sequence for mipi-dsi
  drm/i915/icl: Ungate ddi clocks before IO enable
  drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
  drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
  drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
  drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phy
  drm/mediatek: fix the rate and divder of hdmi phy for MT2701
  drm/mediatek: fix possible object reference leak
  drm/i915: Get power refs in encoder->get_power_domains()
  drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
  drm/amd/display: Fix negative cursor pos programming (v2)
  drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
  drm/udl: add a release method and delay modeset teardown
  drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
  drm/i915/gvt: Annotate iomem usage
  drm/sun4i: DW HDMI: Lower max. supported rate for H6
  Revert "Documentation/gpu/meson: Remove link to meson_canvas.c"
  ...

Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't
explicitly set the return value on the non-faulting path and instead
leaves it holding the result of the underlying atomic operation. This
means that any FUTEX_WAKE_OP atomic operation which computes a non-zero
value will be reported as having failed. Regrettably, I wrote the buggy
code back in 2011 and it was upstreamed as part of the initial arm64
support in 2012.

The reasons we appear to get away with this are:

  1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get
     exercised by futex() test applications

  2. If the result of the atomic operation is zero, the system call
     behaves correctly

  3. Prior to version 2.25, the only operation used by GLIBC set the
     futex to zero, and therefore worked as expected. From 2.25 onwards,
     FUTEX_WAKE_OP is not used by GLIBC at all.

Fix the implementation by ensuring that the return value is either 0
to indicate that the atomic operation completed successfully, or -EFAULT
if we encountered a fault when accessing the user mapping.

Cc: <stable@kernel.org>
Fixes: 6170a974 ("arm64: Atomic operations")
Signed-off-by: Will Deacon <will.deacon@arm.com>

The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.

So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.

Fixes: b2026aa2 ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Re-run the shell fragment that generated the original list now that
there are two dozens of new entries after v5.1's merge window.
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

Thomas-Mich Richter reported he triggered a WARN()ing from event_function_local()
on his s390. The problem boils down to:

	CPU-A				CPU-B

	perf_event_overflow()
	  perf_event_disable_inatomic()
	    @pending_disable = 1
	    irq_work_queue();

	sched-out
	  event_sched_out()
	    @pending_disable = 0

					sched-in
					perf_event_overflow()
					  perf_event_disable_inatomic()
					    @pending_disable = 1;
					    irq_work_queue(); // FAILS

	irq_work_run()
	  perf_pending_event()
	    if (@pending_disable)
	      perf_event_disable_local(); // WHOOPS

The problem exists in generic, but s390 is particularly sensitive
because it doesn't implement arch_irq_work_raise(), nor does it call
irq_work_run() from it's PMU interrupt handler (nor would that be
sufficient in this case, because s390 also generates
perf_event_overflow() from pmu::stop). Add to that the fact that s390
is a virtual architecture and (virtual) CPU-A can stall long enough
for the above race to happen, even if it would self-IPI.

Adding a irq_work_sync() to event_sched_in() would work for all hardare
PMUs that properly use irq_work_run() but fails for software PMUs.

Instead encode the CPU number in @pending_disable, such that we can
tell which CPU requested the disable. This then allows us to detect
the above scenario and even redirect the IPI to make up for the failed
queue.
Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'drm-intel-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Revert back to max link rate and lane count on eDP.
- DSI related fixes for all platforms including Ice Lake.
- GVT Fixes including one vGPU display plane size regression fix,
one for preventing use-after-free in ppgtt shadow free function,
and another warning fix for iomem access annotation.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411235832.GA6476@intel.com