- 17 Feb, 2014 5 commits
-
-
Aneesh Kumar K.V authored
So move it within the if loop Acked-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
pte_update() is a powerpc-ism used to change the bits of a PTE when the access permission is being restricted (a flush is potentially needed). It uses atomic operations on when needed and handles the hash synchronization on hash based processors. It is currently only used to clear PTE bits and so the current implementation doesn't provide a way to also set PTE bits. The new _PAGE_NUMA bit, when set, is actually restricting access so it must use that function too, so this change adds the ability for pte_update() to also set bits. We will use this later to set the _PAGE_NUMA bit. Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kleber Sacilotto de Souza authored
Rev3 of the PCI Express Base Specification defines a Supported Link Speeds Vector where the bit definitions within this field are: Bit 0 - 2.5 GT/s Bit 1 - 5.0 GT/s Bit 2 - 8.0 GT/s This vector definition is used by the platform firmware to export the maximum and current link speeds of the PCI bus via the "ibm,pcie-link-speed-stats" device-tree property. This patch updates pseries_root_bridge_prepare() to detect Gen3 speed buses (defined by 0x04). Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kleber Sacilotto de Souza authored
Commit 5091f0c9 (powerpc/pseries: Fix PCIE link speed endian issue) introduced a regression on the PCI link speed detection using the device-tree property. The ibm,pcie-link-speed-stats property is composed of two 32-bit integers, the first one being the maxinum link speed and the second the current link speed. The changes introduced by the aforementioned commit are considering just the first integer. Fix this issue by changing how the property is accessed, using the helper functions to properly access the array of values. The explicit byte swapping is not needed anymore here, since it's done by the helper functions. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
Guenter Roeck has got the following call trace on a p2020 board: Kernel stack overflow in process eb3e5a00, r1=eb79df90 CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 task: eb3e5a00 ti: c0616000 task.ti: ef440000 NIP: c003a420 LR: c003a410 CTR: c0017518 REGS: eb79dee0 TRAP: 0901 Not tainted (3.13.0-rc8-juniper-00146-g19eca00) MSR: 00029000 <CE,EE,ME> CR: 24008444 XER: 00000000 GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000 GPR08: 00000000 020b8000 00000000 00000000 44008442 NIP [c003a420] __do_softirq+0x94/0x1ec LR [c003a410] __do_softirq+0x84/0x1ec Call Trace: [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable) [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8 [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8 [ef441f40] [c000e7f4] ret_from_except+0x0/0x18 --- Exception: 501 at 0xfcda524 LR = 0x10024900 Instruction dump: 7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9 5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f Kernel panic - not syncing: kernel stack overflow CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 Call Trace: The reason is that we have used the wrong register to calculate the ksp_limit in commit cbc9565e (powerpc: Remove ksp_limit on ppc64). Just fix it. As suggested by Benjamin Herrenschmidt, also add the C prototype of the function in the comment in order to avoid such kind of errors in the future. Cc: stable@vger.kernel.org # 3.12 Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 Feb, 2014 15 commits
-
-
Benjamin Herrenschmidt authored
This patch adds the support for to create a direct iommu "bypass" window on IODA2 bridges (such as Power8) allowing to bypass iommu page translation completely for 64-bit DMA capable devices, thus significantly improving DMA performances. Additionally, this adds a hook to the struct iommu_table so that the IOMMU API / VFIO can disable the bypass when external ownership is requested, since in that case, the device will be used by an environment such as userspace or a KVM guest which must not be allowed to bypass translations. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
We expose a number of OF properties in the kexec and crash dump code and these need to be big endian. Cc: stable@vger.kernel.org # v3.13 Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
We would allocate one specific exception stack for each kind of non-base exceptions for every CPU. For ppc32 the CPU hard ID is used as the subscript to get the specific exception stack for one CPU. But for an UP kernel, there is only one element in the each kind of exception stack array. We would get stuck if the CPU hard ID is not equal to '0'. So in this case we should use the subscript '0' no matter what the CPU hard ID is. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Currently we set our cpu's bit in cpus_in_xmon, and then we take the output lock and print the exception information. This can race with the master cpu entering the command loop and printing the backtrace. The result is that the backtrace gets garbled with another cpu's exception print out. Fix it by delaying the set of cpus_in_xmon until we are finished printing. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
As far as I can tell, our 70s era timeout loop in get_output_lock() is generating no code. This leads to the hostile takeover happening more or less simultaneously on all cpus. The result is "interesting", some example output that is more readable than most: cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00 c0:0 000t0o0V0erc0td:o5 rfc28050000]0c00 0 0 0 6t(pSrycsV1ppuot uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs Fix it by using udelay() in the timeout loop. The wait time and check frequency are arbitrary, but seem to work OK. We already rely on udelay() working so this is not a new dependency. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also skip the while loop because xmon_speaker != last_speaker (0) - meaning we skip the second cmpxchg() also. Following that code path the compiler sees no memory barriers and so is within its rights to never reload xmon_speaker. The end result is we loop forever. This manifests as all cpus being in xmon ('c' command), but they refuse to take control when you switch to them ('c x' for cpu # x). I have seen this deadlock in practice and also checked the generated code to confirm this is what's happening. The simplest fix is just to always try the cmpxchg(). Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anshuman Khandual authored
Right now the config_bhrb() PMU specific call happens after write_mmcr0(), which actually enables the PMU for event counting and interrupts. So there is a small window of time where the PMU and BHRB runs without the required HW branch filter (if any) enabled in BHRB. This can cause some of the branch samples to be collected through BHRB without any filter applied and hence affects the correctness of the results. This patch moves the BHRB config function call before enabling interrupts. Here are some data points captured via trace prints which depicts how we could get PMU interrupts with BHRB filter NOT enabled with a standard perf record command line (asking for branch record information as well). $ perf record -j any_call ls Before the patch:- ls-1962 [003] d... 2065.299590: .perf_event_interrupt: MMCRA: 40000000000 ls-1962 [003] d... 2065.299603: .perf_event_interrupt: MMCRA: 40000000000 ... All the PMU interrupts before this point did not have the requested HW branch filter enabled in the MMCRA. ls-1962 [003] d... 2065.299647: .perf_event_interrupt: MMCRA: 40040000000 ls-1962 [003] d... 2065.299662: .perf_event_interrupt: MMCRA: 40040000000 After the patch:- ls-1850 [008] d... 190.311828: .perf_event_interrupt: MMCRA: 40040000000 ls-1850 [008] d... 190.311848: .perf_event_interrupt: MMCRA: 40040000000 All the PMU interrupts have the requested HW BHRB branch filter enabled in MMCRA. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Fixed up whitespace and cleaned up changelog] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Nathan Fontenot authored
The powerpc specific nx-842 compression driver does not currently handle translating a vmalloc address to a physical address. The current driver uses __pa() for all addresses which does not properly handle vmalloc addresses and thus causes a failure since we do not pass a proper physical address to the hypervisor. This patch adds a routine to convert an address to a physical address by checking for vmalloc addresses and handling them properly. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> --- drivers/crypto/nx/nx-842.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
We have a driver for the ARCH_RANDOM hook in rng.c, so we should select ARCH_RANDOM on pseries. Without this the build breaks if you turn ARCH_RANDOM off. This hasn't broken the build because pseries_defconfig doesn't specify a value for PPC_POWERNV, which is default y, and selects ARCH_RANDOM. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Laurent Dufour authored
Relocation's code is not working in little endian mode because the r_info field, which is a 64 bits value, should be read from the right offset. The current code is optimized to read the r_info field as a 32 bits value starting at the middle of the double word (offset 12). When running in LE mode, the read value is not correct since only the MSB is read. This patch removes this optimization which consist to deal with a 32 bits value instead of a 64 bits one. This way it works in big and little endian mode. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mahesh Salgaonkar authored
On p8 systems, with relocation on exception feature enabled we are seeing kdump kernel hang at interrupt vector 0xc*4400. The reason is, with this feature enabled, exception are raised with MMU (IR=DR=1) ON with the default offset of 0xc*4000. Since exception is raised in virtual mode it requires the vector region to be executable without which it fails to fetch and execute instruction at 0xc*4xxx. For default kernel since kernel is loaded at real 0, the htab mappings sets the entire kernel text region executable. But for relocatable kernel (e.g. kdump case) we only copy interrupt vectors down to real 0 and never marked that region as executable because in p7 and below we always get exception in real mode. This patch fixes this issue by marking htab mapping range as executable that overlaps with the interrupt vector region for relocatable kernel. Thanks to Ben who helped me to debug this issue and find the root cause. Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mahesh Salgaonkar authored
Disable relocation on exception while going down even in kdump case. This is because we are about clear htab mappings while kexec-ing into kdump kernel and we may run into issues if we still have AIL ON. Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Thadeu Lima de Souza Cascardo authored
Commit f5c57710 ("powerpc/eeh: Use partial hotplug for EEH unaware drivers") introduces eeh_rmv_device, which may grab a reference to a driver, but not release it. That prevents a driver from being removed after it has gone through EEH recovery. This patch drops the reference if it was taken. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Paul Gortmaker authored
Commit 446f6d06 ("powerpc/mpic: Properly set default triggers") breaks the mpc7447_hpc_defconfig as follows: CC arch/powerpc/sysdev/mpic.o arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type': arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant Looking at the cpp output (gcc 4.7.3), I see: case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] | mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]: The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set for this platform, thus enabling the following: ------------------- #ifdef CONFIG_MPIC_WEIRD static u32 mpic_infos[][MPIC_IDX_END] = { [0] = { /* Original OpenPIC compatible MPIC */ [...] #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] #else /* CONFIG_MPIC_WEIRD */ #define MPIC_INFO(name) MPIC_##name #endif /* CONFIG_MPIC_WEIRD */ ------------------- Here we convert the case section to if/else if, and also add the equivalent of a default case to warn about unknown types. Boot tested on sbc8548, build tested on all defconfigs. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 Feb, 2014 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull SELinux fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: SELinux: Fix kernel BUG on empty security contexts. selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A couple of fixes, both -stable fodder. The O_SYNC bug is fairly old..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a kmap leak in virtio_console fix O_SYNC|O_APPEND syncing the wrong range on write()
-
-
- 09 Feb, 2014 9 commits
-
-
Al Viro authored
While we are at it, don't do kmap() under kmap_atomic(), *especially* for a page we'd allocated with GFP_KERNEL. It's spelled "page_address", and had that been more than that, we'd have a real trouble - kmap_high() can block, and doing that while holding kmap_atomic() is a Bad Idea(tm). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support) when sync_page_range() had been introduced; generic_file_write{,v}() correctly synced pos_after_write - written .. pos_after_write - 1 but generic_file_aio_write() synced pos_before_write .. pos_before_write + written - 1 instead. Which is not the same thing with O_APPEND, obviously. A couple of years later correct variant had been killed off when everything switched to use of generic_file_aio_write(). All users of generic_file_aio_write() are affected, and the same bug has been copied into other instances of ->aio_write(). The fix is trivial; the only subtle point is that generic_write_sync() ought to be inlined to avoid calculations useless for the majority of calls. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix data corruption when reading/updating compressed extents Btrfs: don't loop forever if we can't run because of the tree mod log btrfs: reserve no transaction units in btrfs_ioctl_set_features btrfs: commit transaction after setting label and features Btrfs: fix assert screwup for the pending move stuff
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes, mostly related to the KASLR fallout, but also other fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf buildid-cache: Check relocation when checking for existing kcore perf tools: Adjust kallsyms for relocated kernel perf tests: No need to set up ref_reloc_sym perf symbols: Prevent the use of kcore if the kernel has moved perf record: Get ref_reloc_sym from kernel map perf machine: Set up ref_reloc_sym in machine__create_kernel_maps() perf machine: Add machine__get_kallsyms_filename() perf tools: Add kallsyms__get_function_start() perf symbols: Fix symbol annotation for relocated kernel perf tools: Fix include for non x86 architectures perf tools: Fix AAAAARGH64 memory barriers perf tools: Demangle kernel and kernel module symbols too perf/doc: Remove mention of non-existent set_perf_event_pending() from design.txt
-
Filipe David Borba Manana authored
When using a mix of compressed file extents and prealloc extents, it is possible to fill a page of a file with random, garbage data from some unrelated previous use of the page, instead of a sequence of zeroes. A simple sequence of steps to get into such case, taken from the test case I made for xfstests, is: _scratch_mkfs _scratch_mount "-o compress-force=lzo" $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar This results in the following file items in the fs tree: item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160 inode generation 6 transid 6 size 542872 block group 0 mode 100600 item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16 inode ref index 2 namelen 6 name: foobar item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53 extent data disk byte 0 nr 0 gen 6 extent data offset 0 nr 24576 ram 266240 extent compression 0 item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53 prealloc data disk byte 12849152 nr 241664 gen 6 prealloc data offset 0 nr 241664 item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53 extent data disk byte 12845056 nr 4096 gen 6 extent data offset 0 nr 20480 ram 20480 extent compression 2 item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53 prealloc data disk byte 13090816 nr 405504 gen 6 prealloc data offset 0 nr 258048 The on disk extent at offset 266240 (which corresponds to 1 single disk block), contains 5 compressed chunks of file data. Each of the first 4 compress 4096 bytes of file data, while the last one only compresses 3024 bytes of file data. Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 = 1072 bytes) should always return zeroes (our next extent is a prealloc one). The solution here is the compression code path to zero the remaining (untouched) bytes of the last page it uncompressed data into, as the information about how much space the file data consumes in the last page is not known in the upper layer fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing the remainder of the page but only if it corresponds to the last page of the inode and if the inode's size is not a multiple of the page size. This would cause not only returning random data on reads, but also permanently storing random data when updating parts of the region that should be zeroed. For the example above, it means updating a single byte in the region [285648 ; 286720[ would store that byte correctly but also store random data on disk. A test case for xfstests follows soon. Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Josef Bacik authored
A user reported a 100% cpu hang with my new delayed ref code. Turns out I forgot to increase the count check when we can't run a delayed ref because of the tree mod log. If we can't run any delayed refs during this there is no point in continuing to look, and we need to break out. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
David Sterba authored
Added in patch "btrfs: add ioctls to query/change feature bits online" modifications to superblock don't need to reserve metadata blocks when starting a transaction. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com>
-
Jeff Mahoney authored
The set_fslabel ioctl uses btrfs_end_transaction, which means it's possible that the change will be lost if the system crashes, same for the newly set features. Let's use btrfs_commit_transaction instead. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com>
-
Josef Bacik authored
Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't reproduce. Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set, which meant that a key part of Filipe's original patch was not being built in. This appears to be a mess up with merging Filipe's patch as it does not exist in his original patch. Fix this by changing how we make sure del_waiting_dir_move asserts that it did not error and take the function out of the ifdef check. This makes btrfs/030 pass with the assert on or off. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Filipe Manana <fdmanana@gmail.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
- 08 Feb, 2014 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl fixes from Linus Walleij: "First round of pin control fixes for v3.14: - Protect pinctrl_list_add() with the proper mutex. This was identified by RedHat. Caused nasty locking warnings was rootcased by Stanislaw Gruszka. - Avoid adding dangerous debugfs files when either half of the subsystem is unused: pinmux or pinconf. - Various fixes to various drivers: locking, hardware particulars, DT parsing, error codes" * tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: tegra: return correct error type pinctrl: do not init debugfs entries for unimplemented functionalities pinctrl: protect pinctrl_list add pinctrl: sirf: correct the pin index of ac97_pins group pinctrl: imx27: fix offset calculation in imx_read_2bit pinctrl: vt8500: Change devicetree data parsing pinctrl: imx27: fix wrong offset to ICONFB pinctrl: at91: use locked variant of irq_set_handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "Add a missing Kconfig dependency" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Generic irq chip requires IRQ_DOMAIN
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "Quite a varied little collection of fixes. Most of them are relatively small or isolated; the biggest one is Mel Gorman's fixes for TLB range flushing. A couple of AMD-related fixes (including not crashing when given an invalid microcode image) and fix a crash when compiled with gcov" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode, AMD: Unify valid container checks x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y x86/efi: Allow mapping BGRT on x86-32 x86: Fix the initialization of physnode_map x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable() x86/intel/mid: Fix X86_INTEL_MID dependencies arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge x86: mm: change tlb_flushall_shift for IvyBridge x86/mm: Eliminate redundant page table walk during TLB range flushing x86/mm: Clean up inconsistencies when flushing TLB ranges mm, x86: Account for TLB flushes only when debugging x86/AMD/NB: Fix amd_set_subcaches() parameter type x86/quirks: Add workaround for AMD F16h Erratum792 x86, doc, kconfig: Fix dud URL for Microcode data
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs fix from David Kleikamp: "Fix regression" * tag 'jfs-3.14-rc2' of git://github.com/kleikamp/linux-shaggy: jfs: fix generic posix ACL regression
-
Dave Kleikamp authored
I missed a couple errors in reviewing the patches converting jfs to use the generic posix ACL function. Setting ACL's currently fails with -EOPNOTSUPP. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Reported-by:
Michael L. Semon <mlsemon35@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de>
-
Richard Weinberger authored
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `dw_wdt_drv_probe': drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource' Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- 07 Feb, 2014 1 commit
-
-
Linus Torvalds authored
Merge tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single kernfs fix to resolve a much-reported lockdep issue with the removal of entries in sysfs" * tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: make kernfs_deactivate() honor KERNFS_LOCKDEP flag
-