- 21 May, 2017 25 commits
-
-
stephen hemminger authored
The build header functions are not used by any other code. net/ipv6/fou6.c:36:5: warning: no previous prototype for ‘fou6_build_header’ [-Wmissing-prototypes] net/ipv6/fou6.c:54:5: warning: no previous prototype for ‘gue6_build_header’ [-Wmissing-prototypes] Need to do some code rearranging to satisfy different Kconfig possiblities. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The TCP New Vegas congestion control was exporting an internal function tcpnv_get_info which is not used by any other in tree kernel code. Make it static. Signed-off-by:
-
stephen hemminger authored
The prototype for inet_rcv_saddr_equal was not being included. Signed-off-by:
-
stephen hemminger authored
This warning: net/ipv6/ila/ila_lwt.c: In function ‘ila_output’: net/ipv6/ila/ila_lwt.c:42:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] It looks like the code attempts to set propagate different error values, but always returned -EINVAL. Compile tested only. Needs review by original author. Signed-off-by:
-
stephen hemminger authored
Found by reviewing the warning about unused policy table. The code implies that it meant to check for size, but since it unrolled the loop for attribute validation that is never used. Instead do explicit check for attribute. Compile tested only. Needs review by original author. Signed-off-by:
-
David S. Miller authored
Miroslav Lichvar says: ==================== Extend socket timestamping API Changes v5->v6: - fixed skb_is_swtx_tstamp() when OPT_TX_SWHW is disabled and improved its description - improved OPT_PKTINFO documentation - improved scm_timestamping documentation Changes v4->v5: - fixed initialization of reserved fields in struct scm_ts_pktinfo Changes v3->v4: - added reserved fields to struct scm_ts_pktinfo - replaced patch fixing false SW timestamps with a documentation fix - updated OPT_TX_SWHW patch to handle false SW timestamps Changes v2->v3: - modified struct scm_ts_pktinfo to use fixed-width integer types - added WARN_ON_ONCE for missing RCU lock in dev_get_by_napi_id() - modified dev_get_by_napi_id() to not return dev in unexpected branch - modified recv to return SCM_TIMESTAMPING_PKTINFO even if the interface index is unknown Changes v1->v2: - added separate patch for new NAPI functions - split code from __sock_recv_timestamp() for better readability - fixed RCU locking - fixed compiler warning (missing case in switch in first patch) - inline sw_tx_timestamp() in its only user Changes RFC->v1: - reworked SOF_TIMESTAMPING_OPT_PKTINFO patch to not add new fields to skb shared info (net device is now looked up by napi_id), not require any changes in drivers, and restrict the cmsg to incoming packets - renamed SOF_TIMESTAMPING_OPT_MULTIMSG to SOF_TIMESTAMPING_OPT_TX_SWHW and fixed its description - moved struct scm_ts_pktinfo from errqueue.h to net_tstamp.h as it can't be received from the error queue anymore - improved commit descriptions and removed incorrect comment This patchset adds new options to the timestamping API that will be useful for NTP implementations and possibly other applications. The first patch specifies a timestamp filter for NTP packets. The second patch updates drivers that can timestamp all packets, or need to list the filter as unsupported. There is no attempt to add the support to the phyter driver. The third patch adds two helper functions working with NAPI ID, which is needed by the next patch. The fourth patch adds a new option to get a new control message with the L2 length and interface index for incoming packets with hardware timestamps. The fifth patch fixes documentation on number of non-zero fields in scm_timestamping and warns about false software timestamps when SO_TIMESTAMP(NS) is combined with SCM_TIMESTAMPING. The sixth patch adds a new option to request both software and hardware timestamps for outgoing packets. The seventh patch updates drivers that assumed software timestamping cannot be used together with hardware timestamping. The patches have been tested on x86_64 machines with igb and e1000e drivers. ==================== Signed-off-by: -
Miroslav Lichvar authored
Some drivers were calling the skb_tx_timestamp() function only when a hardware timestamp was not requested. Now that applications can use the SOF_TIMESTAMPING_OPT_TX_SWHW option to request both software and hardware timestamps, the drivers need to be modified to unconditionally call skb_tx_timestamp(). CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
-
Miroslav Lichvar authored
Add SOF_TIMESTAMPING_OPT_TX_SWHW option to allow an outgoing packet to be looped to the socket's error queue with a software timestamp even when a hardware transmit timestamp is expected to be provided by the driver. Applications using this option will receive two separate messages from the error queue, one with a software timestamp and the other with a hardware timestamp. As the hardware timestamp is saved to the shared skb info, which may happen before the first message with software timestamp is received by the application, the hardware timestamp is copied to the SCM_TIMESTAMPING control message only when the skb has no software timestamp or it is an incoming packet. While changing sw_tx_timestamp(), inline it in skb_tx_timestamp() as there are no other users. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Miroslav Lichvar authored
The scm_timestamping struct may return multiple non-zero fields, e.g. when both software and hardware RX timestamping is enabled, or when the SO_TIMESTAMP(NS) option is combined with SCM_TIMESTAMPING and a false software timestamp is generated in the recvmsg() call in order to always return a SCM_TIMESTAMP(NS) message. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Miroslav Lichvar authored
Add SOF_TIMESTAMPING_OPT_PKTINFO option to request a new control message for incoming packets with hardware timestamps. It contains the index of the real interface which received the packet and the length of the packet at layer 2. The index is useful with bonding, bridges and other interfaces, where IP_PKTINFO doesn't allow applications to determine which PHC made the timestamp. With the L2 length (and link speed) it is possible to transpose preamble timestamps to trailer timestamps, which are used in the NTP protocol. While this information could be provided by two new socket options independently from timestamping, it doesn't look like they would be very useful. With this option any performance impact is limited to hardware timestamping. Use dev_get_by_napi_id() to get the device and its index. On kernels with disabled CONFIG_NET_RX_BUSY_POLL or drivers not using NAPI, a zero index will be returned in the control message. CC: Richard Cochran <richardcochran@gmail.com> Acked-by:
-
Miroslav Lichvar authored
Since commit b6858177 ("net: Make skb->skb_iif always track skb->dev") skbs don't have the original index of the interface which received the packet. This information is now needed for a new control message related to hardware timestamping. Instead of adding a new field to skb, we can find the device by the NAPI ID if it is available, i.e. CONFIG_NET_RX_BUSY_POLL is enabled and the driver is using NAPI. Add dev_get_by_napi_id() and also skb_napi_id() to hide the CONFIG_NET_RX_BUSY_POLL ifdef. CC: Richard Cochran <richardcochran@gmail.com> Suggested-by:
-
Miroslav Lichvar authored
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Miroslav Lichvar authored
Add HWTSTAMP_FILTER_NTP_ALL to the hwtstamp_rx_filters enum for timestamping of NTP packets. There is currently only one driver (phyter) that could support it directly. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Ganesh Goudar authored
issue get port information command to firmware to retrieve port information and update if it is different from what was last recorded and also add indication for supported link modes for firmware port types FW_PORT_TYPE_SFP28, FW_PORT_TYPE_KR_SFP28, FW_PORT_TYPE_CR4_QSFP. Based on the original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Sivakumar Krishnasamy authored
Current largesend and checksum offload feature in ibmveth driver, - Source VM sends the TCP packets with ip_summed field set as CHECKSUM_PARTIAL and TCP pseudo header checksum is placed in checksum field - CHECKSUM_PARTIAL flag in SKB will enable ibmveth driver to mark "no checksum" and "checksum good" bits in transmit buffer descriptor before the packet is delivered to pseries PowerVM Hypervisor - If ibmveth has largesend capability enabled, transmit buffer descriptors are market accordingly before packet is delivered to Hypervisor (along with mss value for packets with length > MSS) - Destination VM's ibmveth driver receives the packet with "checksum good" bit set and so, SKB's ip_summed field is set with CHECKSUM_UNNECESSARY - If "largesend" bit was on, mss value is copied from receive descriptor into SKB's gso_size and other flags are appropriately set for packets > MSS size - The packet is now successfully delivered up the stack in destination VM The offloads described above works fine for TCP communication among VMs in the same pseries server ( VM A <=> PowerVM Hypervisor <=> VM B ) We are now enabling support for OVS in pseries PowerVM environment. One of our requirements is to have ibmveth driver configured in "Trunk" mode, when they are used with OVS. This is because, PowerVM Hypervisor will no more bridge the packets between VMs, instead the packets are delivered to IO Server which hosts OVS to bridge them between VMs or to external networks (flow shown below), VM A <=> PowerVM Hypervisor <=> IO Server(OVS) <=> PowerVM Hypervisor <=> VM B In "IO server" the packet is received by inbound Trunk ibmveth and then delivered to OVS, which is then bridged to outbound Trunk ibmveth (shown below), Inbound Trunk ibmveth <=> OVS <=> Outbound Trunk ibmveth In this model, we hit the following issues which impacted the VM communication performance, - Issue 1: ibmveth doesn't support largesend and checksum offload features when configured as "Trunk". Driver has explicit checks to prevent enabling these offloads. - Issue 2: SYN packet drops seen at destination VM. When the packet originates, it has CHECKSUM_PARTIAL flag set and as it gets delivered to IO server's inbound Trunk ibmveth, on validating "checksum good" bits in ibmveth receive routine, SKB's ip_summed field is set with CHECKSUM_UNNECESSARY flag. This packet is then bridged by OVS (or Linux Bridge) and delivered to outbound Trunk ibmveth. At this point the outbound ibmveth transmit routine will not set "no checksum" and "checksum good" bits in transmit buffer descriptor, as it does so only when the ip_summed field is CHECKSUM_PARTIAL. When this packet gets delivered to destination VM, TCP layer receives the packet with checksum value of 0 and with no checksum related flags in ip_summed field. This leads to packet drops. So, TCP connections never goes through fine. - Issue 3: First packet of a TCP connection will be dropped, if there is no OVS flow cached in datapath. OVS while trying to identify the flow, computes the checksum. The computed checksum will be invalid at the receiving end, as ibmveth transmit routine zeroes out the pseudo checksum value in the packet. This leads to packet drop. - Issue 4: ibmveth driver doesn't have support for SKB's with frag_list. When Physical NIC has GRO enabled and when OVS bridges these packets, OVS vport send code will end up calling dev_queue_xmit, which in turn calls validate_xmit_skb. In validate_xmit_skb routine, the larger packets will get segmented into MSS sized segments, if SKB has a frag_list and if the driver to which they are delivered to doesn't support NETIF_F_FRAGLIST feature. This patch addresses the above four issues, thereby enabling end to end largesend and checksum offload support for better performance. - Fix for Issue 1 : Remove checks which prevent enabling TCP largesend and checksum offloads. - Fix for Issue 2 : When ibmveth receives a packet with "checksum good" bit set and if its configured in Trunk mode, set appropriate SKB fields using skb_partial_csum_set (ip_summed field is set with CHECKSUM_PARTIAL) - Fix for Issue 3: Recompute the pseudo header checksum before sending the SKB up the stack. - Fix for Issue 4: Linearize the SKBs with frag_list. Though we end up allocating buffers and copying data, this fix gives upto 4X throughput increase. Note: All these fixes need to be dropped together as fixing just one of them will lead to other issues immediately (especially for Issues 1,2 & 3). Signed-off-by:Sivakumar Krishnasamy <ksiva@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed/qede updates This series contains some general minor fixes and enhancements: - #1, #2 and #9 correct small missing ethtool functionality. - #3, #6 and #8 correct minor issues in driver, but those are either print-related or unexposed in existing code. - #4 adds proper support to TLB mode bonding. - #10 is meant to improve performance on varying cache-line sizes. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
Some variants of adapters support the 1G speed capability. Need to allow the configuration of 1G speed if adapter supports it. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Tomer Tayar authored
The management firmware HSI contains masks which are already shifted to their right place, so QED_MFW_SET_FIELD() is clearing incorrect fields by shifting the mask by the offset. Luckily, today we set the fields in an incrementing order [so we're not erasing any previously set fields], but this still needs fixing. Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
This is benign, but it makes more sense to start the close sequence only after changing the internal state [in case it would once care]. Signed-off-by:
-
Mintz, Yuval authored
If too many CQs are requested, qed would print the available number as if it's a resource and not a feature leading to the wrong print. Fixes: 08737a3f ("qed: Inform qedi the number of possible CQs") Signed-off-by:
-
Tomer Tayar authored
Re-organize the logic that allocates and frees memory of various sub-components of the hw-function - a. No need to pass pointers to said structure as parameters; The internal logic knows exactly where to find/set the data. b. Nullify pointers after cleanup to prevent possible errors to re-entrant code. Signed-off-by: -
Mintz, Yuval authored
Driver maintains its primary MAC in a private field which gets updated when ndo_dev_set_mac() gets called. However, there are flows where the primary MAC of the device can change without said NDO being called [bond device in TLB mode configuring slaves' addresses], resulting in a configuration where there's a mismatch between what's apparent to user [the netdevice's value] and what's configured in the HW [the private value]. As we don't have any real motivation of maintaining this private field, simply remove it and start using the netdevice's field instead. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
When destroying the datapath channels, qede doesn't notify qed of the released status blocks which were acquired during the initialization. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Driver always allocates the maximal number of tx-buffers irrespective of actual Tx ring config. Signed-off-by:
-
Mintz, Yuval authored
When management firmware declares that the device is WoL-capable, the default driver behavior would be to allow the management firmware to take the decision of whether it's actually needed or not. Problem is ethtool interface doesn't have a 'default' kind of option, and user would see the interface WoL as disabled, which doesn't accurately reflect the actual configuration. More-so, if the user actually wants to explicitly disable WoL he'd have to first enable it [otherwise ethtool would block the command]. Instead of allowing management to make the decision, enable WoL by default on all devices capable of it. Signed-off-by:
-
- 19 May, 2017 12 commits
-
-
David S. Miller authored
Iyappan Subramanian says: ==================== Check all RGMII phy mode variants This patch set, - adds phy_interface_mode_is_rgmii() helper function - addresses review comment from previous patch set, by calling phy_interface_mode_is_rgmii() to address all RGMII variants v2: Address review comments from v1 - adds phy_interface_mode_is_rgmii() helper function - addresses review comment from previous patch set, by calling phy_interface_mode_is_rgmii() to address all RGMII variants v1: - Initial version ==================== Signed-off-by:Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
This patch addresses the review comment from the previous patch set, by using phy_interface_mode_is_rgmii() helper function to address all RGMII phy mode variants. Signed-off-by:
Quan Nguyen <qnguyen@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
Added helper function that checks phy_mode is RGMII (all variants) 'bool phy_interface_mode_is_rgmii(phy_interface_t mode)' Changed the following function, to use the above. 'bool phy_interface_is_rgmii(struct phy_device *phydev)' Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Suggested-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
David S. Miller authored
Davide Caratti says: ==================== net: fix CRC32c in the forwarding path Current kernel allows offloading CRC32c computation when SCTP packets are generated, setting skb->ip_summed to CHECKSUM_PARTIAL, if the underlying device features have NETIF_F_SCTP_CRC set. However, after these packets are forwarded, they may land on a device where CRC32c offloading is not available: as a consequence, transmission is done with wrong CRC32c. It's not possible to use sctp_compte_cksum() in the forwarding path and in most drivers, because it needs symbols exported by libcrc32c module. Patch 1 and 2 of this series try to solve this problem, introducing a new helper function, namely skb_crc32c_csum_help(), that can be used to resolve CHECKSUM_PARTIAL when crc32c is needed instead of Internet Checksum. Currently, we need to parse the packet headers to understand what algorithm is needed to resolve CHECKSUM_PARTIAL. We can speedup things by storing this information in the skb metadata, and use it to call an appropriate helper (skb_checksum_help or skb_crc32c_csum_help), or leave the packet unmodified when the NIC is able to offload the checksum computation. Patch 3 deprecates skb->csum_bad to free one bit in skb metadata; patch 4 introduces skb->csum_not_inet, providing skb with an indication on the algorithm needed to resolve CHECKSUM_PARTIAL. Patch 5 and 6 fix the kernel forwarding path and openvswitch datapath, where skb_checksum_help was unconditionally called to resolve CHECKSUM_PARTIAL, thus generating wrong CRC32c in forwarded SCTP packets. Finally, patch 7 updates documentation to provide a better description of possible values of skb->ip_summed. Some further work is still possible: * drivers that parse the packet header to correctly resolve CHECKSUM_PARTIAL (e.g. ixgbe_tx_csum()) can benefit from testing skb->csum_not_inet to avoid calling ip_hdr(skb)->protocol or ixgbe_ipv6_csum_is_sctp(skb). * drivers that call skb_checksum_help() to resolve CHECKSUM_PARTIAL can call skb_csum_hwoffload_help to avoid corrupting SCTP packets. Changes v2->v3: - patch 1/7: more standard declaration of stub variables Changes v1->v2: - none Changes RFCv4->v1: - patch 2/7: use WARN_ON_ONCE() instead of BUG_ON(), and avoid computing CRC32c on the error path. - patch 3/7: don't invert tests on the values of same_flow and NAPI_GRO_CB(skb)->flush in dev_gro_receive(), it's useless and it breaks GRO functionality as reported by kernel test robot. ==================== Signed-off-by: -
Davide Caratti authored
Add FCoE to the list of protocols that can set CHECKSUM_UNNECESSARY; add a note to CHECKSUM_COMPLETE section to specify that it does not apply to SCTP and FCoE protocols. Suggested-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
-
Davide Caratti authored
if skb carries an SCTP packet and ip_summed is CHECKSUM_PARTIAL, it needs CRC32c in place of Internet Checksum: use skb_csum_hwoffload_help to avoid corrupting such packets while queueing them towards userspace. Signed-off-by:
-
Davide Caratti authored
skb_csum_hwoffload_help() uses netdev features and skb->csum_not_inet to determine if skb needs software computation of Internet Checksum or crc32c (or nothing, if this computation can be done by the hardware). Use it in place of skb_checksum_help() in validate_xmit_skb() to avoid corruption of non-GSO SCTP packets having skb->ip_summed equal to CHECKSUM_PARTIAL. While at it, remove references to skb_csum_off_chk* functions, since they are not present anymore in Linux _ see commit cf53b1da ("Revert "net: Add driver helper functions to determine checksum offloadability""). Signed-off-by:
-
Davide Caratti authored
skb->csum_not_inet carries the indication on which algorithm is needed to compute checksum on skb in the transmit path, when skb->ip_summed is equal to CHECKSUM_PARTIAL. If skb carries a SCTP packet and crc32c hasn't been yet written in L4 header, skb->csum_not_inet is assigned to 1; otherwise, assume Internet Checksum is needed and thus set skb->csum_not_inet to 0. Suggested-by:
-
Davide Caratti authored
This bit was introduced with commit 5a212329 ("net: Support for csum_bad in skbuff") to reduce the stack workload when processing RX packets carrying a wrong Internet Checksum. Up to now, only one driver and GRO core are setting it. Suggested-by:
-
Davide Caratti authored
skb_crc32c_csum_help is like skb_checksum_help, but it is designed for checksumming SCTP packets using crc32c (see RFC3309), provided that libcrc32c.ko has been loaded before. In case libcrc32c is not loaded, invoking skb_crc32c_csum_help on a skb results in one the following printouts: warn_crc32c_csum_update: attempt to compute crc32c without libcrc32c.ko warn_crc32c_csum_combine: attempt to compute crc32c without libcrc32c.ko Signed-off-by:
-
Davide Caratti authored
sctp_compute_checksum requires crc32c symbol (provided by libcrc32c), so it can't be used in net core. Like it has been done previously with other symbols (e.g. ipv6_dst_lookup), introduce a stub struct skb_checksum_ops to allow computation of crc32c checksum in net core after sctp.ko (and thus libcrc32c) has been loaded. Signed-off-by:
-
Soheil Hassas Yeganeh authored
Commit bafbb9c7 ("tcp: eliminate negative reordering in tcp_clean_rtx_queue") fixes an issue for negative reordering metrics. To be resilient to such errors, warn and return when a negative metric is passed to tcp_update_reordering(). Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 18 May, 2017 3 commits
-
-
-
Wei Yongjun authored
'encap_header' is malloced and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that is not needed. Signed-off-by:
-
