The standard DT property is called "#interrupt-cells".

Link: https://lore.kernel.org/r/20191101160356.32034-1-geert+renesas@glider.beSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.5 (take two)

  - JSON schema conversion,
  - Core support for the new R-Car M3-W+ (r8a77961) SoC,
  - Board compatible updates.

* tag 'renesas-dt-bindings-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: power: rcar-sysc: Document r8a77961 support
  dt-bindings: reset: rcar-rst: Document r8a77961 support
  dt-bindings: arm: renesas: Add Salvator-XS board with R-Car M3-W+
  dt-bindings: arm: renesas: Document R-Car M3-W+ SoC DT bindings
  dt-bindings: arm: renesas: Add R-Car M3-N ULCB with Kingfisher
  dt-bindings: arm: renesas: Convert 'renesas,prr' to json-schema

Link: https://lore.kernel.org/r/20191101155842.31467-7-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM64 DT updates for v5.5 (take two)

  - Video-Input and Serial-ATA support on RZ/G2N,
  - Color Management Module support on various R-Car Gen3 SoCs,
  - Initial support for the R-Car M3-W+ (r8a77961) SoC on the
    Salvator-XS board.

* tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
  arm64: dts: renesas: Add Renesas R8A77961 SoC support
  arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
  dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
  dt-bindings: power: Add r8a77961 SYSC power domain definitions
  arm64: dts: renesas: r8a774b1: Add SATA controller node
  arm64: dts: renesas: rcar-gen3: Add CMM units
  arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support

Link: https://lore.kernel.org/r/20191101155842.31467-5-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.5/prm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

PRM reset control dts changes for v5.5 merge window

This series of changes adds the PRM reset driver nodes for am3/4, omap4/5
and dra7 SoCs. The reset driver changes make it easier to add support for
various accelerators for TI SoCs in a more generic way.

Note that this branch is based on the PRM reset driver changes branch.

* tag 'omap-for-v5.5/prm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap5: Add PRM data
  ARM: dts: am43xx: Add PRM data
  ARM: dts: am33xx: Add PRM data
  ARM: dts: omap4: add PRM nodes
  ARM: dts: dra7: add PRM nodes
  soc: ti: omap-prm: add omap5 PRM data
  soc: ti: omap-prm: add am4 PRM data
  soc: ti: omap-prm: add dra7 PRM data
  soc: ti: omap-prm: add data for am33xx
  soc: ti: omap-prm: add omap4 PRM data
  soc: ti: omap-prm: add support for denying idle for reset clockdomain
  soc: ti: omap-prm: poll for reset complete during de-assert
  soc: ti: add initial PRM driver with reset control support
  dt-bindings: omap: add new binding for PRM instances

Link: https://lore.kernel.org/r/pull-1572623173-281197@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Make sure UART3, where the console is, is called ttyS2. That is
consistent with the early console.

Link: https://lore.kernel.org/r/20191031163455.1711872-5-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

Ponted out by DTC:

  <stdout>: Warning (unit_address_vs_reg): /memory: node has a reg or ranges
  property, but no unit name

Link: https://lore.kernel.org/r/20191031163455.1711872-4-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

There's a typo there that rightfully upsets DTS:

  <stdout>: Warning (simple_bus_reg): /soc/watchdog@2c000620: simple-bus
  unit address format error, expected "e0000620"

Link: https://lore.kernel.org/r/20191031163455.1711872-3-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

It should have one and DTC is indeed unhappy about its absence:

  <stdout>: Warning (unit_address_vs_reg): /soc/clocks: node has a reg or
  ranges property, but no unit name

Link: https://lore.kernel.org/r/20191031163455.1711872-2-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers
in this SoC with maximum of 32 gpios. Except GPIOC, all controllers
are capable of generating edge/level interrupts from first 8 lines.

Link: https://lore.kernel.org/r/20191030101154.6312-2-manivannan.sadhasivam@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoCs DT updates for 5.5

- add Mali450 MP4 GPU node in the hi6220 SoC

* tag 'hisi-arm64-dt-for-5.5' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: Add Mali-450 MP4 GPU DT entry

Link: https://lore.kernel.org/r/5DB95AAB.8060405@hisilicon.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt

Realtek ARM64 based SoC DT for v5.5

Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs.
Add reset controllers for RTD129x and start using them for UARTs.

* tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
  arm64: dts: realtek: Add RTD129x UART resets
  arm64: dts: realtek: Add RTD129x reset controller nodes
  dt-bindings: reset: Add Realtek RTD1295
  arm64: dts: realtek: Add watchdog node for RTD129x
  arm64: dts: realtek: Add oscillator for RTD129x
  arm64: dts: realtek: Add RTD1296 and Synology DS418
  dt-bindings: arm: realtek: Document RTD1296 and Synology DS418
  arm64: dts: realtek: Add RTD1293 and Synology DS418j
  arm64: dts: realtek: Change dual-license from MIT to BSD
  dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j
  dt-bindings: arm: realtek: Tidy up conversion to json-schema

Link: https://lore.kernel.org/r/20191030041000.31848-2-afaerber@suse.deSigned-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'for_5.5/keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt

* 'for_5.5/keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone: enable cpts
  ARM: dts: k2l-netcp: add cpts refclk_mux node
  ARM: dts: k2hk-netcp: add cpts refclk_mux node
  ARM: dts: k2e-netcp: add cpts refclk_mux node
  ARM: dts: k2e-clocks: add input ext. fixed clocks tsipclka/b
  ARM: dts: keystone-clocks: add input fixed clocks

Link: https://lore.kernel.org/r/1572372856-20598-2-git-send-email-santosh.shilimkar@oracle.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_updates_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.5
- Arria10
	- modify QSPI read-delay property
- Agilex
	- Add QSPI support
	- Enable USB and LEDs
	- Add service layer, fpga manager support
- Stratix10
	- Update QSPI reg address

* tag 'socfpga_dts_updates_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: agilex: add service layer, fpga manager and fpga region
  arm64: agilex: enable USB and LEDs on agilex devkit
  arm64: dts: altera: update QSPI reg addresses for Stratix10
  arm64: dts: agilex: add QSPI support for Intel Agilex
  ARM: dts: arria10: Modify QSPI read_delay for Arria10

Link: https://lore.kernel.org/r/20191029143737.24850-1-dinguyen@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Add initial support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM.

The memory map is as follows:
  - Bank0: 4GiB RAM : 0x000048000000 -> 0x000bfffffff
		      0x000480000000 -> 0x004ffffffff
  - Bank1: 4GiB RAM : 0x000600000000 -> 0x006ffffffff

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-10-geert+renesas@glider.be

Add initial support for the Renesas R-Car M3-W+ (R8A77961) SoC.

This includes:
  - Cortex-A57 and Cortex-A53 CPU cores
    (incl. L2 caches and power state definitions),
  - Power Management Unit,
  - PSCI firmware,
  - Pin Function Controller,
  - Clock, Reset, System, and Interrupt Controllers,
  - SCIF2 serial console,
  - Product Register,
  - ARM Architectured Timer,
and various placeholders to allow to use salvator-xs.dtsi.

Based on r8a7796.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-9-geert+renesas@glider.be

CONFIG_ARCH_R8A7796 for R-Car M3-W (R8A77960) will be renamed to
CONFIG_ARCH_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961),
which will use CONFIG_ARCH_R8A77961.

Relax dependencies by handling both symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-8-geert+renesas@glider.be

Renesas R-Car M3-W+ DT Binding Definitions

Clock and Power Domain definitions for the Renesas R-Car M3-W+
(R8A77961) SoC, shared by driver and DT source files.

Add DT binding documentation for the System Controller in the Renesas
R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122911.12166-5-geert+renesas@glider.be

Add DT binding documentation for the Reset block in the Renesas R-Car
M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122911.12166-4-geert+renesas@glider.be

Add device tree binding documentation for the Renesas Salvator-XS board
equipped with an R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-3-geert+renesas@glider.be

Add device tree binding documentation for the Renesas R-Car M3-W+
(R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-2-geert+renesas@glider.be

Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car
M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's
Manual (Rev. 2.00, Jul. 31, 2019).  A gap is added for CSIREF, to
preserve compatibility with the definitions for R-Car M3-W (R8A77960).

Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2)
are not included, as they are used as internal clock sources only, and
never referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122941.12342-3-geert+renesas@glider.be

Add power domain indices for the R-Car M3-W+ (R8A77961) SoC.

Based on Rev. 2.00 of the R-Car Series, 3rd Generation, Hardware User’s
Manual (Jul. 31, 2019).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191023122911.12166-6-geert+renesas@glider.be

Associate the UART nodes with the corresponding reset controller bits.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add nodes for the Realtek RTD1295 reset controllers.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add a header with symbolic reset indices for Realtek RTD1295 SoC.
Naming was derived from reset-names in an OEM's Device Tree.
Acked-by: Rob Herring <robh@kernel.org>
[AF: Dropped RTD1295 specific binding definition, updated SPDX]
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add the watchdog node to the RTD129x Device Tree.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
[AF: Moved from RTD1295 to new RTD129x]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add 27 MHz oscillator clock node.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add Device Trees for RTD1296 SoC and Synology DiskStation DS418.

Cc: info@synology.com
Signed-off-by: Andreas Färber <afaerber@suse.de>

Define compatible strings for Realtek RTD1296 SoC and Synology
DiskStation DS418 NAS.

Cc: info@synology.com
Acked-by: Rob Herring <robh@kernel.org>
[AF: Converted to json-schema]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Add Device Trees for RTD1293 SoC and Synology DiskStation DS418j NAS.

Cc: info@synology.com
Signed-off-by: Andreas Färber <afaerber@suse.de>

Move the SPDX-License-Identifier to the top line and update to SPDX 2.0.
While at it, switch from GPLv2+/MIT to GPLv2+/BSD2c before adding more.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

Define compatible strings for Realtek RTD1293 SoC and Synology
DiskStation DS418j NAS.

Cc: info@synology.com
Acked-by: Rob Herring <robh@kernel.org>
[AF: Converted to json-schema]
Signed-off-by: Andreas Färber <afaerber@suse.de>

Merge tag 'stm32-dt-for-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.5, round 1

Highlights:
----------

MPU part:
 -Add and enable ADC support on stm32mp157a-dk1
 -Add DAC support on stm32mp157c-ed1
 -Add and enable VREFBUF support on stm32mp157a-dk1
 -Add focaltech touchscreen on stm32mp157c-dk2
 -Add hdmi support on stm32mp157a-dk1
 -Fix issues seen during YAML DT validation
 -Fix regulators issues for all MPU boards

MCU part:
 -Fix issues seen during YAML DT validation

* tag 'stm32-dt-for-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: remove useless dma-ranges property for stm32f469
  ARM: dts: stm32: remove useless dma-ranges property for stm32f429
  ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96
  ARM: dts: stm32: Fix active discharge usage on stm32mp157
  ARM: dts: stm32: change default minimal buck1 value on stm32mp157
  ARM: dts: stm32: add PWR regulators support on stm32mp157
  ARM: dts: stm32: remove useless interrupt from dsi node for stm32f469
  ARM: dts: stm32: add hdmi audio support to stm32mp157a-dk1 board
  ARM: dts: stm32: Add DAC support to stm32mp157c-ed1
  ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1
  ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 board
  ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
  ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boards
  ARM: dts: stm32: fix memory nodes to match with DT validation tool
  ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 board
  ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
  ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
  ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
  ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board

Link: https://lore.kernel.org/r/02c39510-f36d-abbb-c76f-49aff07c0a08@st.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'juno-update-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno update for v5.5

Single patch to add support for Mali GPU on all versions of Juno.
Though it's disabled by default, it is very useful to test panfrost
drivers.

* tag 'juno-update-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: add GPU subsystem

Link: https://lore.kernel.org/r/20191028040022.GC20568@e107533-lin.cambridge.arm.comSigned-off-by: Olof Johansson <olof@lixom.net>

Restore the device names for compatible strings as comments.
Prepare for adding more SoCs by inserting oneOf.

Fixes: 693af5f3 ("dt-bindings: arm: Convert Realtek board/soc bindings to json-schema")
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

hi6220 has a Mali450 MP4 so lets add it into the DT.

Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Remove dma-ranges from ltdc node since it is already set
on bus node.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Remove dma-ranges from ltdc node since it is already set
on bus node.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Active discharge is not needed on vbus_otg and generate unneeded current
consumption.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>