Pull SCSI fixes from James Bottomley:
 "23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
  of the changes are in qla2xxx and ufs and all are mostly small and
  definitely don't impact the core"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
  Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
  scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
  scsi: qla2xxx: Check if FW supports MQ before enabling
  scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
  scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
  scsi: qla2xxx: Reduce noisy debug message
  scsi: qla2xxx: Fix login timeout
  scsi: qla2xxx: Indicate correct supported speeds for Mezz card
  scsi: qla2xxx: Flush I/O on zone disable
  scsi: qla2xxx: Flush all sessions on zone disable
  scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
  scsi: scsi_debug: Fix scp is NULL errors
  scsi: zfcp: Fix use-after-free in request timeout handlers
  scsi: ufs: No need to send Abort Task if the task in DB was cleared
  scsi: ufs: Clean up completed request without interrupt notification
  scsi: ufs: Improve interrupt handling for shared interrupts
  scsi: ufs: Fix interrupt error message for shared interrupts
  scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
  scsi: ufs-mediatek: Fix incorrect time to wait link status
  ...

Pull devicetree fixes from Rob Herring:
 "Another set of DT fixes:

   - restore range parsing error check

   - workaround PCI range parsing with missing 'device_type' now
     required

   - correct description of 'phy-connection-type'

   - fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema

   - a couple of grammar and whitespace fixes

   - update Shawn Guo's email"

* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: vendor-prefixes: Remove trailing whitespace
  dt-bindings: net: correct description of phy-connection-type
  dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
  of: address: Work around missing device_type property in pcie nodes
  dt: writing-schema: Miscellaneous grammar fixes
  dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
  of/address: check for invalid range.cpu_addr

Fixes: f516fb70 ("dt-bindings: Whitespace clean-ups in schema files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.beSigned-off-by: Rob Herring <robh@kernel.org>

The phy-connection-type parameter is described in ePAPR 1.1:

Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.comSigned-off-by: Rob Herring <robh@kernel.org>

Pull io_uring fixes from Jens Axboe:

 - Make sure the head link cancelation includes async work

 - Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
   a separate function since you moved it into io_uring itself

 - io_import_iovec cleanups (Pavel, me)

 - Use system_unbound_wq for ring exit work, to avoid spawning tons of
   these if we have tons of rings exiting at the same time

 - Fix req->flags overflow flag manipulation (Pavel)

* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
  io_uring: kill extra iovec=NULL in import_iovec()
  io_uring: comment on kfree(iovec) checks
  io_uring: fix racy req->flags modification
  io_uring: use system_unbound_wq for ring exit work
  io_uring: cleanup io_import_iovec() of pre-mapped request
  io_uring: get rid of kiocb_wait_page_queue_init()
  io_uring: find and cancel head link async work on files exit

The intel,lgm-pcie binding is matching on all snps,dw-pcie instances
which is wrong. Add a custom 'select' entry to fix this.

Fixes: e54ea45a ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Merge misc fixes from Andrew Morton:
 "11 patches.

  Subsystems affected by this: misc, mm/hugetlb, mm/vmalloc, mm/misc,
  romfs, relay, uprobes, squashfs, mm/cma, mm/pagealloc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, page_alloc: fix core hung in free_pcppages_bulk()
  mm: include CMA pages in lowmem_reserve at boot
  squashfs: avoid bio_alloc() failure with 1Mbyte blocks
  uprobes: __replace_page() avoid BUG in munlock_vma_page()
  kernel/relay.c: fix memleak on destroy relay channel
  romfs: fix uninitialized memory leak in romfs_dev_read()
  mm/rodata_test.c: fix missing function declaration
  mm/vunmap: add cond_resched() in vunmap_pmd_range
  khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
  hugetlb_cgroup: convert comma to semicolon
  mailmap: add Andi Kleen

Pull RISC-V fixes from Palmer Dabbelt:

 - The CLINT driver has been split in two: one to handle the M-mode
   CLINT (memory mapped and used on NOMMU systems) and one to handle the
   S-mode CLINT (via SBI).

 - The addition of SiFive's drivers to rv32_defconfig

* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Add SiFive drivers to rv32_defconfig
  dt-bindings: timer: Add CLINT bindings
  RISC-V: Remove CLINT related code from timer and arch
  clocksource/drivers: Add CLINT timer driver
  RISC-V: Add mechanism to provide custom IPI operations

Pull xen fixes from Juergen Gross:
 "One build fix and a minor fix for suppressing a useless warning when
  booting a Xen dom0 via UEFI"

* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Fix build error when CONFIG_ACPI is not set/enabled:
  efi: avoid error message when booting under Xen

Pull power management fixes from Rafael Wysocki:
 "These fix a few issues in the operating performance points (OPP)
  framework.

  Specifics:

   - Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra
     Nayak)

   - Fix OPP table reference counting in error paths (Stephen Boyd)"

* tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Enable resources again if they were disabled earlier
  opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
  opp: Put opp table in dev_pm_opp_set_rate() for empty tables

Pull ext4 updates from Ted Ts'o:
 "Improvements to ext4's block allocator performance for very large file
  systems, especially when the file system or files which are highly
  fragmented. There is a new mount option, prefetch_block_bitmaps which
  will pull in the block bitmaps and set up the in-memory buddy bitmaps
  when the file system is initially mounted.

  Beyond that, a lot of bug fixes and cleanups. In particular, a number
  of changes to make ext4 more robust in the face of write errors or
  file system corruptions"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
  ext4: limit the length of per-inode prealloc list
  ext4: reorganize if statement of ext4_mb_release_context()
  ext4: add mb_debug logging when there are lost chunks
  ext4: Fix comment typo "the the".
  jbd2: clean up checksum verification in do_one_pass()
  ext4: change to use fallthrough macro
  ext4: remove unused parameter of ext4_generic_delete_entry function
  mballoc: replace seq_printf with seq_puts
  ext4: optimize the implementation of ext4_mb_good_group()
  ext4: delete invalid comments near ext4_mb_check_limits()
  ext4: fix typos in ext4_mb_regular_allocator() comment
  ext4: fix checking of directory entry validity for inline directories
  fs: prevent BUG_ON in submit_bh_wbc()
  ext4: correctly restore system zone info when remount fails
  ext4: handle add_system_zone() failure in ext4_setup_system_zone()
  ext4: fold ext4_data_block_valid_rcu() into the caller
  ext4: check journal inode extents more carefully
  ext4: don't allow overlapping system zones
  ext4: handle error of ext4_setup_system_zone() on remount
  ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
  ...

If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry.  If the superblock has a dynamic root
(ie.  what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.

Fix this by skipping that bit of code if there is no root dentry.

This leads to an oops looking like:

	general protection fault, ...
	KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
	...
	RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
	...
	Call Trace:
	 afs_kill_super+0x13b/0x180 fs/afs/super.c:535
	 deactivate_locked_super+0x94/0x160 fs/super.c:335
	 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
	 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
	 do_new_mount fs/namespace.c:2875 [inline]
	 path_mount+0x1387/0x2070 fs/namespace.c:3192
	 do_mount fs/namespace.c:3205 [inline]
	 __do_sys_mount fs/namespace.c:3413 [inline]
	 __se_sys_mount fs/namespace.c:3390 [inline]
	 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

which is oopsing on this line:

	inode_lock(root->d_inode);

presumably because sb->s_root was NULL.

Fixes: 0da0b7fd ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull rdma fixes from Jason Gunthorpe:
 "One regression from 5.8 and a few bugs from earlier kernels:

   - Various spelling corrections in kernel prints

   - Bug fixes in hfi1 and bntx_re

   - Revert a 5.8 patch in hns

   - Batch update for Mellanox and Cumulus maintainers emails"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
  Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
  RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
  RDMA/bnxt_re: Do not add user qps to flushlist
  RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
  RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
  RDMA/hns: Fix spelling mistake "epmty" -> "empty"

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes over several drivers, but all are driver-
  specific and nothing looks scary.

  Slightly large changes are seen in ASoC qcom driver for the bugs that
  were revealed by the recent ASoC core change to report the invalid
  register access errors. Also ASoC fsl got a slight intensive change
  for the distortion fix.

  Others are only trivial fixes or device-specific quirks"

* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: hda: avoid reset of sdo_limit
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
  ALSA: usb-audio: ignore broken processing/extension unit
  ASoC: intel: Fix memleak in sst_media_open
  ASoC: wm8994: Avoid attempts to read unreadable registers
  ASoC: msm8916-wcd-analog: fix register Interrupt offset
  ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
  ALSA: hda/realtek: Add model alc298-samsung-headphone
  ALSA: usb-audio: Update documentation comment for MS2109 quirk
  ALSA: isa: fix spelling mistakes in the comments
  ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
  ASoC: q6routing: add dummy register read/write function
  ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
  ASoC: Make soc_component_read() returning an error code again
  ASoC: amd: Replacing component->name with codec_dai->name.
  ASoC: fsl: Fix unused variable warning
  ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
  ...

Pull drm fixes from Dave Airlie:
 "Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
  i915 and amdgpu. I'd expect the usual uptick for rc3.

  amdgpu:
   - Fix allocation size
   - SR-IOV fixes
   - Vega20 SMU feature state caching fix
   - Fix custom pptable handling
   - Arcturus golden settings update
   - Several display fixes
   - Fixes for Navy Flounder
   - Misc display fixes
   - RAS fix

  amdkfd:
   - SDMA fix for renoir

  i915:
   - Fix device parameter usage for selftest mock i915 device
   - Fix LPSP capability debugfs NULL dereference
   - Fix buddy register pagemask table
   - Fix intel_atomic_check() non-negative return value
   - Fix selftests passing a random 0 into ilog2()
   - Fix TGL power well enable/disable ordering
   - Switch to PMU module refcounting
   - GVT fixes

  virtio:
   - Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
   - Fix memory leak in virtio_gpu_cleanup_object()"

* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  Revert "drm/amdgpu: disable gfxoff for navy_flounder"
  drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
  drm/i915/selftests: Avoid passing a random 0 into ilog2
  drm/i915: Fix wrong return value in intel_atomic_check()
  drm/i915: Update bw_buddy pagemask table
  drm/i915/display: Check for an LPSP encoder before dereferencing
  drm/i915: Copy default modparams to mock i915_device
  drm/i915: Provide the perf pmu.module
  drm/amd/display: fix pow() crashing when given base 0
  drm/amd/display: Reset scrambling on Test Pattern
  drm/amd/display: fix dcn3 wide timing dsc validation
  drm/amd/display: Fix DFPstate hang due to view port changed
  drm/amd/display: Assign correct left shift
  drm/amd/display: Call DMUB for eDP power control
  drm/amdkfd: fix the wrong sdma instance query for renoir
  drm/amdgpu: parse ta firmware for navy_flounder
  drm/amdgpu: fix NULL pointer access issue when unloading driver
  drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
  drm/amdgpu: disable gfxoff for navy_flounder
  drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
  ...

The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.

P1						P2

Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.

					Allocate the pages from the
					movable zone.

Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
					This process is entered into
					the exit path thus it tries
					to release the order-0 pages
					to pcp lists through
					free_unref_page_commit().
					As pcp->high = 0, pcp->count = 1
					proceed to call the function
					free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
					Read the pcp's batch value using
					READ_ONCE() and pass the same to
					free_pcppages_bulk(), pcp values
					passed here are, batch = 63,
					count = 1.

					Since num of pages in the pcp
					lists are less than ->batch,
					then it will stuck in
					while(list_empty(list)) loop
					with interrupts disabled thus
					a core hung.

Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.

The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.

With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.

This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).

[1]: https://patchwork.kernel.org/patch/11696389/

Fixes: 5f8dcc21 ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones.  Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.

The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.

The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.

The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall.  This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order.  With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.

This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.

In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout

  cma: Reserved 256 MiB at 0x0000000030000000
  Zone ranges:
    DMA      [mem 0x0000000000000000-0x000000002fffffff]
    Normal   empty
    HighMem  [mem 0x0000000030000000-0x000000003fffffff]

would result in 0 lowmem_reserve for the DMA zone.  This would allow
userspace to deplete the DMA zone easily.

Funnily enough

  $ cat /proc/sys/vm/lowmem_reserve_ratio

would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.

This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.

Fixes: bc22af74 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".

Bio_alloc() is limited to 256 pages (1 Mbyte).  This can cause a failure
when reading 1 Mbyte block filesystems.  The problem is a datablock can be
fully (or almost uncompressed), requiring 256 pages, but, because blocks
are not aligned to page boundaries, it may require 257 pages to read.

Bio_kmalloc() can handle 1024 pages, and so use this for the edge
condition.

Fixes: 93e72b3c ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com>
Reported-by: Tomoatsu Shimada <shimada@walbrix.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: Philippe Liard <pliard@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Daniel Rosenberg <drosen@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.ukSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page().  Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).

Fixes: 5a52c9df ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvilsSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak report memory leak as follows:

  unreferenced object 0x607ee4e5f948 (size 8):
  comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s)
  hex dump (first 8 bytes):
  00 00 00 00 00 00 00 00 ........
  backtrace:
     relay_open kernel/relay.c:583 [inline]
     relay_open+0xb6/0x970 kernel/relay.c:563
     do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
     __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
     blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
     blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
     block_ioctl+0xe5/0x120 fs/block_dev.c:1871
     vfs_ioctl fs/ioctl.c:48 [inline]
     __do_sys_ioctl fs/ioctl.c:753 [inline]
     __se_sys_ioctl fs/ioctl.c:739 [inline]
     __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
     do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel.  Fix it by adding free_percpu() before
return from relay_destroy_channel().

Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David Rientjes <rientjes@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Akash Goel <akash.goel@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.

romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device.  It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.

However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes.  This e.g.  means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.

Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.

Fixes: da4458bd ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The compilation with CONFIG_DEBUG_RODATA_TEST set produces the following
warning due to the missing include.

 mm/rodata_test.c:15:6: warning: no previous prototype for 'rodata_test' [-Wmissing-prototypes]
    15 | void rodata_test(void)
       |      ^~~~~~~~~~~

Fixes: 2959a5f7 ("mm: add arch-independent testcases for RODATA")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200819080026.918134-1-leon@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below.  On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.

22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777]
 NIP [c0000000000dc224] plpar_hcall+0x38/0x58
 LR [c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0
 Call Trace:
    flush_hash_page+0x114/0x200
    hpte_need_flush+0x2dc/0x540
    vunmap_page_range+0x538/0x6f0
    free_unmap_vmap_area+0x30/0x70
    remove_vm_area+0xfc/0x140
    __vunmap+0x68/0x270
    __iounmap.part.0+0x34/0x60
    memunmap+0x54/0x70
    release_nodes+0x28c/0x300
    device_release_driver_internal+0x16c/0x280
    unbind_store+0x124/0x170
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xd8/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x70
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200807075933.310240-1-aneesh.kumar@linux.ibm.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit().  I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().

Fixes: bbe98f9c ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvilsSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace a comma between expression statements by a semicolon.

Fixes: faced7e0 ("mm: hugetlb controller for cgroups v2")
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Link: http://lkml.kernel.org/r/20200818064333.21759-1-vulab@iscas.ac.cnSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I keep getting bounce back from the suse.de address.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Quentin Perret <qperret@qperret.net>
Link: http://lkml.kernel.org/r/20200818203214.659955-1-ndesaulniers@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mellanox and Cumulus Network were acquired by Nvidia, so change the
maintainers emails to new domain name.

Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'drm-intel-fixes-2020-08-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.9-rc2:
- GVT fixes
- Fix device parameter usage for selftest mock i915 device
- Fix LPSP capability debugfs NULL dereference
- Fix buddy register pagemask table
- Fix intel_atomic_check() non-negative return value
- Fix selftests passing a random 0 into ilog2()
- Fix TGL power well enable/disable ordering
- Switch to PMU module refcounting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6yp7jp3.fsf@intel.com

Merge tag 'amd-drm-fixes-5.9-2020-08-20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-08-20:

amdgpu:
- Fixes for Navy Flounder
- Misc display fixes
- RAS fix

amdkfd:
- SDMA fix for renoir
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820041938.3928-1-alexander.deucher@amd.com

Pull PCI fix from Bjorn Helgaas:
 "Fix P2PDMA build issue (Christoph Hellwig)"

* tag 'pci-v5.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/P2PDMA: Fix build without DMA ops

This adds SiFive drivers to rv32_defconfig, to keep in sync with the
64-bit config. This is useful when testing 32-bit kernel with QEMU
'sifive_u' 32-bit machine.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

We add DT bindings documentation for CLINT device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
   clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
   counter register for clocksource and CLINT MMIO compare register
   for clockevent device.

We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

We add a separate CLINT timer driver for Linux RISC-V M-mode (i.e.
RISC-V NoMMU kernel).

The CLINT MMIO device provides three things:
1. 64bit free running counter register
2. 64bit per-CPU time compare registers
3. 32bit per-CPU inter-processor interrupt registers

Unlike other timer devices, CLINT provides IPI registers along with
timer registers. To use CLINT IPI registers, the CLINT timer driver
provides IPI related callbacks to arch/riscv.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

We add mechanism to set custom IPI operations so that CLINT driver
from drivers directory can provide custom IPI operations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne,
  me)"

* tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-pool: Only allocate from CMA when in same memory zone
  dma-pool: fix coherent pool allocations for IOMMU mappings

The afs_put_operation() function needs to put the reference to the key
that's authenticating the operation.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull operating performance points (OPP) framework fixes for 5.9-rc2
from Viresh Kumar:

"This contains the following fixes for 5.9:

 - Fix re-enabling of resources (Rajendra Nayak).

 - Put OPP table references (Stephen Boyd)."

* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Enable resources again if they were disabled earlier
  opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
  opp: Put opp table in dev_pm_opp_set_rate() for empty tables

If io_import_iovec() returns an error, return iovec is undefined and
must not be used, so don't set it to NULL when failing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

kfree() handles NULL pointers well, but io_{read,write}() checks it
because of performance reasons. Leave a comment there for those who are
tempted to patch it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>