Skip to content

L
linux
Switch branch/tag
  1. 14 Mar, 2016 2 commits
  3. 07 Mar, 2016 30 commits
  5. 04 Mar, 2016 2 commits
  7. 03 Mar, 2016 6 commits
    • Borislav Petkov's avatar
      EDAC, mc_sysfs: Fix freeing bus' name · 1e719417
      Borislav Petkov authored 
      commit 12e26969 upstream.

I get the splat below when modprobing/rmmoding EDAC drivers. It happens
because bus->name is invalid after bus_unregister() has run. The Code: section
below corresponds to:

  .loc 1 1108 0
  movq    672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus
  .loc 1 1109 0
  popq    %rbx    #

  .loc 1 1108 0
  movq    (%rax), %rdi    # _7->name,
  jmp     kfree   #

and %rax has some funky stuff 2030203020312030 which looks a lot like
something walked over it.

Fix that by saving the name ptr before doing stuff to string it points to.

  general protection fault: 0000 [#1] SMP
  Modules linked in: ...
  CPU: 4 PID: 10318 Comm: modprobe Tainted: G          I EN  3.12.51-11-default+ #48
  Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011
  task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000
  RIP: 0010:[<ffffffffa019da92>]  [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core]
  RSP: 0018:ffff88030da3fe28  EFLAGS: 00010292
  RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c
  RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286
  RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110
  R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68
  R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000
  FS:  00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0
  Stack:
  Call Trace:
    i7core_unregister_mci.isra.9
    i7core_remove
    pci_device_remove
    __device_release_driver
    driver_detach
    bus_remove_driver
    pci_unregister_driver
    i7core_exit
    SyS_delete_module
    system_call_fastpath
    0x7fc9bf426536
  Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b
  RIP  [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core]
   RSP <ffff88030da3fe28>
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes: 7a623c03 ("edac: rewrite the sysfs code to use struct device")
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      1e719417
    • Jeff Layton's avatar
      locks: fix unlock when fcntl_setlk races with a close · 2da2c15f
      Jeff Layton authored 
      commit 7f3697e2 upstream.

Dmitry reported that he was able to reproduce the WARN_ON_ONCE that
fires in locks_free_lock_context when the flc_posix list isn't empty.

The problem turns out to be that we're basically rebuilding the
file_lock from scratch in fcntl_setlk when we discover that the setlk
has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END,
then we may end up with fl_start and fl_end values that differ from
when the lock was initially set, if the file position or length of the
file has changed in the interim.

Fix this by just reusing the same lock request structure, and simply
override fl_type value with F_UNLCK as appropriate. That ensures that
we really are unlocking the lock that was initially set.

While we're there, make sure that we do pop a WARN_ON_ONCE if the
removal ever fails. Also return -EBADF in this event, since that's
what we would have returned if the close had happened earlier.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Fixes: c293621b (stale POSIX lock handling)
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Signed-off-by: default avatarJeff Layton <jeff.layton@primarydata.com>
Acked-by: default avatar"J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      2da2c15f
    • Konrad Rzeszutek Wilk's avatar
      xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. · 7949b7bf
      Konrad Rzeszutek Wilk authored 
      commit 4d8c8bd6 upstream.

Occasionaly PV guests would crash with:

pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16
BUG: unable to handle kernel paging request at 0000000d1a8c0be0
.. snip..
  <ffffffff8139ce1b>] find_next_bit+0xb/0x10
  [<ffffffff81387f22>] cpumask_next_and+0x22/0x40
  [<ffffffff813c1ef8>] pci_device_probe+0xb8/0x120
  [<ffffffff81529097>] ? driver_sysfs_add+0x77/0xa0
  [<ffffffff815293e4>] driver_probe_device+0x1a4/0x2d0
  [<ffffffff813c1ddd>] ? pci_match_device+0xdd/0x110
  [<ffffffff81529657>] __device_attach_driver+0xa7/0xb0
  [<ffffffff815295b0>] ? __driver_attach+0xa0/0xa0
  [<ffffffff81527622>] bus_for_each_drv+0x62/0x90
  [<ffffffff8152978d>] __device_attach+0xbd/0x110
  [<ffffffff815297fb>] device_attach+0xb/0x10
  [<ffffffff813b75ac>] pci_bus_add_device+0x3c/0x70
  [<ffffffff813b7618>] pci_bus_add_devices+0x38/0x80
  [<ffffffff813dc34e>] pcifront_scan_root+0x13e/0x1a0
  [<ffffffff817a0692>] pcifront_backend_changed+0x262/0x60b
  [<ffffffff814644c6>] ? xenbus_gather+0xd6/0x160
  [<ffffffff8120900f>] ? put_object+0x2f/0x50
  [<ffffffff81465c1d>] xenbus_otherend_changed+0x9d/0xa0
  [<ffffffff814678ee>] backend_changed+0xe/0x10
  [<ffffffff81463a28>] xenwatch_thread+0xc8/0x190
  [<ffffffff810f22f0>] ? woken_wake_function+0x10/0x10

which was the result of two things:

When we call pci_scan_root_bus we would pass in 'sd' (sysdata)
pointer which was an 'pcifront_sd' structure. However in the
pci_device_add it expects that the 'sd' is 'struct sysdata' and
sets the dev->node to what is in sd->node (offset 4):

set_dev_node(&dev->dev, pcibus_to_node(bus));

 __pcibus_to_node(const struct pci_bus *bus)
{
        const struct pci_sysdata *sd = bus->sysdata;

        return sd->node;
}

However our structure was pcifront_sd which had nothing at that
offset:

struct pcifront_sd {
        int                        domain;    /*     0     4 */
        /* XXX 4 bytes hole, try to pack */
        struct pcifront_device *   pdev;      /*     8     8 */
}

That is an hole - filled with garbage as we used kmalloc instead of
kzalloc (the second problem).

This patch fixes the issue by:
 1) Use kzalloc to initialize to a well known state.
 2) Put 'struct pci_sysdata' at the start of 'pcifront_sd'. That
    way access to the 'node' will access the right offset.
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: default avatarBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      7949b7bf
    • Al Viro's avatar
      do_last(): don't let a bogus return value from ->open() et.al. to confuse us · 66efd9e7
      Al Viro authored 
      commit c80567c8 upstream.

... into returning a positive to path_openat(), which would interpret that
as "symlink had been encountered" and proceed to corrupt memory, etc.
It can only happen due to a bug in some ->open() instance or in some LSM
hook, etc., so we report any such event *and* make sure it doesn't trick
us into further unpleasantness.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      66efd9e7
    • Simon Guinot's avatar
      kernel/resource.c: fix muxed resource handling in __request_region() · 2976c211
      Simon Guinot authored 
      commit 59ceeaaf upstream.

In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released.  A pointer on the conflicting resource is kept.  At wake-up
this pointer is used as a parent to retry to request the region.

A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed).  Another
problem is that the next call to __request_region() fails to detect a
remaining conflict.  The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself.  It is likely
to succeed anyway, even if there is still a conflict.

Instead, the parent of the conflicting resource should be passed to
__request_region().

As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.
Reported-and-tested-by: default avatarVincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: default avatarSimon Guinot <simon.guinot@sequanux.org>
Tested-by: default avatarVincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      2976c211
    • Stefan Hajnoczi's avatar
      sunrpc/cache: fix off-by-one in qword_get() · 6e234db5
      Stefan Hajnoczi authored 
      commit b7052cd7 upstream.

The qword_get() function NUL-terminates its output buffer.  If the input
string is in hex format \xXXXX... and the same length as the output
buffer, there is an off-by-one:

  int qword_get(char **bpp, char *dest, int bufsize)
  {
      ...
      while (len < bufsize) {
          ...
          *dest++ = (h << 4) | l;
          len++;
      }
      ...
      *dest = '\0';
      return len;
  }

This patch ensures the NUL terminator doesn't fall outside the output
buffer.
Signed-off-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      6e234db5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7