- 13 Aug, 2011 1 commit
-
-
Stephen Boyd authored
MSMs post 8x50 have 2Mb at the beginning of RAM reserved for shared memory. Since the kernel hasn't typically been told this RAM exists, PHYS_OFFSET has been set to 0xN0200000 and the memory atags passed to the kernel have matched. This doesn't play nicely with things such as AUTO_ZRELADDR, which doesn't work at all, and dynamic phys to virt, which requires an MSM specific workaround. Work around these issues by telling the kernel RAM starts at 0xN0000000 (it actually does) and fixup the atags from the bootloader (if necessary) to say the same. In addition, make sure to set TEXT_OFFSET at least 2Mb beyond the start of RAM so that the kernel doesn't end up being decompressed into shared memory. After doing this, AUTO_ZRELADDR should work on MSM with no problems and ARM_PATCH_PHYS_VIRT_16BIT should no longer be necessary. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
- 11 Aug, 2011 1 commit
-
-
Russell King authored
Enable virtual to physical translation patching by default in all kernels. Hide the option behind EMBEDDED. This can still be turned off if people desire, and they know what they're doing, to shrink the size of the kernel to a minimum. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
- 10 Aug, 2011 1 commit
-
-
Russell King authored
This has now been well tested, and several platforms are now selecting this directly. It's time to drop its experimental status. Signed-off-by:
-
- 09 Aug, 2011 5 commits
-
-
Dave Martin authored
With the UM_SIGNAL alignment fault mode, no siginfo structure is passed to userspace. POSIX specifies how siginfo_t should be populated for alignment faults, so this patch does just that: * si_signo = SIGBUS * si_code = BUS_ADRALN * si_addr = misaligned data address at which access was attempted Signed-off-by:
Dave Martin <dave.martin@linaro.org> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by:
-
Dave Martin authored
Currently, it's possible to set the kernel to ignore alignment faults when changing the alignment fault handling mode at runtime via /proc/sys/alignment, even though this is undesirable on ARMv6 and above, where it can result in infinite spins where an un-fixed- up instruction repeatedly faults. In addition, the kernel clobbers any alignment mode specified on the command-line if running on ARMv6 or above. This patch factors out the necessary safety check into a couple of new helper functions, and checks and modifies the fault handling mode as appropriate on boot and on writes to /proc/cpu/alignment. Prior to ARMv6, the behaviour is unchanged. For ARMv6 and above, the behaviour changes as follows: * Attempting to ignore faults on ARMv6 results in the mode being forced to UM_FIXUP instead. A warning is printed if this happened as a result of a write to /proc/cpu/alignment. The user's UM_WARN bit (if present) is still honoured. * An alignment= argument from the kernel command-line is now honoured, except that the kernel will modify the specified mode as described above. This is allows modes such as UM_SIGNAL and UM_WARN to be active immediately from boot, which is useful for debugging purposes. Signed-off-by: -
Jamie Iles authored
poison_init_mem() used a loop of: while ((count = count - 4)) which has 2 problems - an off by one error so that we do one less word than we should, and the other is that if count == 0 then we loop forever and poison too much. On a platform with HAVE_TCM=y but nothing in the TCM's, this caused corruption and the platform failed to boot. Acked-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Brian S. Julin authored
The file mm/proc-arm946.S contains a typo and is missing a structure member in __arm946_proc_info. The former prevents compilation and the latter causes problems during boot. It is likely this file was manually copied from a similar file and not tested, then later updates to the *_proc_info structures missed this file. This patch will apply (with offset) with or without the recent macro unification work that has been done in this directory. This was verified against linux-next/stable last week. See arm-linux-kernel thread: http://lists.arm.linux.org.uk/lurker/message/20110718.103237.0106d468.en.htmlSigned-off-by:
Brian S. Julin <bri@abrij.org> Signed-off-by:
-
Russell King authored
Something changed during the 3.1 merge window in the include files which now causes the pl08x DMA engine driver to fail to build. Fix this by adding the now necessary dma-mapping.h include: drivers/dma/amba-pl08x.c: In function ■pl08x_unmap_buffers■: drivers/dma/amba-pl08x.c:1524: error: implicit declaration of function ■dma_unmap_single■ drivers/dma/amba-pl08x.c:1527: error: implicit declaration of function ■dma_unmap_page■ Acked-by:
Vinod Koul <vinod.koul@intel.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 04 Aug, 2011 32 commits
-
-
Russell King authored
Unfortunately, the module fixups cause the kernel to fail to build when SMP is not enabled. Fix this by removing the reference to fixup_smp on non-SMP fixup kernels, but ensuring that if we do have the SMP fixup section, we refuse to load the module. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data target: Fix bug for transport_generic_wait_for_tasks with direct operation target: iscsi_target depends on NET target: Fix WRITE_SAME_16 lba assignment breakage MAINTAINERS: Add target-devel list for drivers/target/ iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN iscsi-target: Fix uninitialized usage of cmd->pad_bytes iscsi-target: strlen() doesn't count the terminator iscsi-target: Fix NULL dereference on allocation failure
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: dt: add of_alias_scan and of_alias_get_id
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: use kzalloc in ext4_kzalloc()
-
Vasiliy Kulikov authored
We may optimistically check .in_use == 0 without holding the rw_mutex: it's the common case, and if it's zero, there certainly won't be any segments associated with us. After taking the lock, the idr_for_each() will do the right thing, so we could now drop the re-check inside the lock without any real cost. But it won't hurt. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vasiliy Kulikov authored
Commit 4c677e2e ("shm: optimize locking and ipc_namespace getting") introduced a copy-paste bug. Due to the bug cycle optimizations were disabled. Signed-off-by:
-
Robert P. J. Day authored
Expand the fs/Kconfig "help" info to clarify why it's a bad idea to deselect the TMPFS_POSIX_ACL config variable. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
Make the radix_tree exceptional cases, mostly in filemap.c, clearer. It's hard to devise a suitable snappy name that illuminates the use by shmem/tmpfs for swap, while keeping filemap/pagecache/radix_tree generality. And akpm points out that /* radix_tree_deref_retry(page) */ comments look like calls that have been commented out for unknown reason. Skirt the naming difficulty by rearranging these blocks to handle the transient radix_tree_deref_retry(page) case first; then just explain the remaining shmem/tmpfs swap case in a comment. Signed-off-by:
-
Hugh Dickins authored
We have already acknowledged that swapoff of a tmpfs file is slower than it was before conversion to the generic radix_tree: a little slower there will be acceptable, if the hotter paths are faster. But it was a shock to find swapoff of a 500MB file 20 times slower on my laptop, taking 10 minutes; and at that rate it significantly slows down my testing. Now, most of that turned out to be overhead from PROVE_LOCKING and PROVE_RCU: without those it was only 4 times slower than before; and more realistic tests on other machines don't fare as badly. I've tried a number of things to improve it, including tagging the swap entries, then doing lookup by tag: I'd expected that to halve the time, but in practice it's erratic, and often counter-productive. The only change I've so far found to make a consistent improvement, is to short-circuit the way we go back and forth, gang lookup packing entries into the array supplied, then shmem scanning that array for the target entry. Scanning in place doubles the speed, so it's now only twice as slow as before (or three times slower when the PROVEs are on). So, add radix_tree_locate_item() as an expedient, once-off, single-caller hack to do the lookup directly in place. #ifdef it on CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited applicability as save space in other configurations. And, sadly, #include sched.h for cond_resched(). Signed-off-by:
-
Hugh Dickins authored
Remove PageSwapBacked (!page_is_file_cache) cases from add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now go through shmem_add_to_page_cache(). Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(), and add a comment on swap entries to invalidate_mapping_pages(). And mincore_page() uses find_get_page() on what might be shmem or a tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef). Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Hugh Dickins authored
But we've not yet removed the old swp_entry_t i_direct[16] from shmem_inode_info. That's because it was still being shared with the inline symlink. Remove it now (saving 64 or 128 bytes from shmem inode size), and use kmemdup() for short symlinks, say, those up to 128 bytes. I wonder why mpol_free_shared_policy() is done in shmem_destroy_inode() rather than shmem_evict_inode(), where we usually do such freeing? I guess it doesn't matter, and I'm not into NUMA mpol testing right now. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Hugh Dickins authored
Convert shmem_writepage() to use shmem_delete_from_page_cache() to use shmem_radix_tree_replace() to substitute swap entry for page pointer atomically in the radix tree. As with shmem_add_to_page_cache(), it's not entirely satisfactory to be copying such code from delete_from_swap_cache, but again judged easier to sell than making its other callers go through the extras. Remove the toy implementation's shmem_put_swap() and shmem_get_swap(), now unreferenced, and the hack to disable swap: it's now good to go. The way things have worked out, info->lock no longer helps to guard the shmem_swaplist: we increment swapped under shmem_swaplist_mutex only. That global mutex exclusion between shmem_writepage() and shmem_unuse() is not pretty, and we ought to find another way; but it's been forced on us by recent race discoveries, not a consequence of this patchset. And what has become of the WARN_ON_ONCE(1) free_swap_and_cache() if a swap entry was found already present? That's no longer possible, the (unknown) one inserting this page into filecache would hit the swap entry occupying that slot. Signed-off-by:
-
Hugh Dickins authored
Remove mem_cgroup_shmem_charge_fallback(): it was only required when we had to move swappage to filecache with GFP_NOWAIT. Remove the GFP_NOWAIT special case from mem_cgroup_cache_charge(), by moving its call out from shmem_add_to_page_cache() to two of thats three callers. But leave it doing mem_cgroup_uncharge_cache_page() on error: although asymmetrical, it's easier for all 3 callers to handle. These two changes would also be appropriate if anyone were to start using shmem_read_mapping_page_gfp() with GFP_NOWAIT. Remove mem_cgroup_get_shmem_target(): mc_handle_file_pte() can test radix_tree_exceptional_entry() to get what it needs for itself. Signed-off-by:
-
Hugh Dickins authored
Convert shmem_getpage_gfp(), the engine-room of shmem, to expect page or swap entry returned from radix tree by find_lock_page(). Whereas the repetitive old method proceeded mainly under info->lock, dropping and repeating whenever one of the conditions needed was not met, now we can proceed without it, leaving shmem_add_to_page_cache() to check for a race. This way there is no need to preallocate a page, no need for an early radix_tree_preload(), no need for mem_cgroup_shmem_charge_fallback(). Move the error unwinding down to the bottom instead of repeating it throughout. ENOSPC handling is a little different from before: there is no longer any race between find_lock_page() and finding swap, but we can arrive at ENOSPC before calling shmem_recalc_inode(), which might occasionally discover freed space. Be stricter to check i_size before returning. info->lock is used for little but alloced, swapped, i_blocks updates. Move i_blocks updates out from under the max_blocks check, so even an unlimited size=0 mount can show accurate du. Signed-off-by:
-
Hugh Dickins authored
Convert shmem_unuse_inode() to use a lockless gang lookup of the radix tree, searching for matching swap. This is somewhat slower than the old method: because of repeated radix tree descents, because of copying entries up, but probably most because the old method noted and skipped once a vector page was cleared of swap. Perhaps we can devise a use of radix tree tagging to achieve that later. shmem_add_to_page_cache() uses shmem_radix_tree_replace() to compensate for the lockless lookup by checking that the expected entry is in place, under lock. It is not very satisfactory to be copying this much from add_to_page_cache_locked(), but I think easier to sell than insisting that every caller of add_to_page_cache*() go through the extras. Signed-off-by:
-
Hugh Dickins authored
Disable the toy swapping implementation in shmem_writepage() - it's hard to support two schemes at once - and convert shmem_truncate_range() to a lockless gang lookup of swap entries along with pages, freeing both. Since the second loop tightens its noose until all entries of either kind have been squeezed out (and we shall make sure that there's not an instant when neither is visible), there is no longer a need for yet another pass below. shmem_radix_tree_replace() compensates for the lockless lookup by checking that the expected entry is in place, under lock, before replacing it. Here it just deletes, but will be used in later patches to substitute swap entry for page or page for swap entry. Signed-off-by:
-
Hugh Dickins authored
Bring truncate.c's code for truncate_inode_pages_range() inline into shmem_truncate_range(), replacing its first call (there's a followup call below, but leave that one, it will disappear next). Don't play with it yet, apart from leaving out the cleancache flush, and (importantly) the nrpages == 0 skip, and moving shmem_setattr()'s partial page preparation into its partial page handling. Signed-off-by:
-
Hugh Dickins authored
While it's at its least, make a number of boring nitpicky cleanups to shmem.c, mostly for consistency of variable naming. Things like "swap" instead of "entry", "pgoff_t index" instead of "unsigned long idx". And since everything else here is prefixed "shmem_", better change init_tmpfs() to shmem_init(). Signed-off-by:
-
Hugh Dickins authored
The maximum size of a shmem/tmpfs file has been limited by the maximum size of its triple-indirect swap vector. With 4kB page size, maximum filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of that on a 64-bit kernel. (With 8kB page size, maximum filesize was just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, MAX_LFS_FILESIZE being then more restrictive than swap vector layout.) It's a shame that tmpfs should be more restrictive than ramfs, and this limitation has now been noticed. Add another level to the swap vector? No, it became obscure and hard to maintain, once I complicated it to make use of highmem pages nine years ago: better choose another way. Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then tmpfs would never have invented its own peculiar radix tree: we would have fitted swap entries into the common radix tree instead, in much the same way as we fit swap entries into page tables. And why should each file have a separate radix tree for its pages and for its swap entries? The swap entries are required precisely where and when the pages are not. We want to put them together in a single radix tree: which can then avoid much of the locking which was needed to prevent them from being exchanged underneath us. This also avoids the waste of memory devoted to swap vectors, first in the shmem_inode itself, then at least two more pages once a file grew beyond 16 data pages (pages accounted by df and du, but not by memcg). Allocated upfront, to avoid allocation when under swapping pressure, but pure waste when CONFIG_SWAP is not set - I have never spattered around the ifdefs to prevent that, preferring this move to sharing the common radix tree instead. There are three downsides to sharing the radix tree. One, that it binds tmpfs more tightly to the rest of mm, either requiring knowledge of swap entries in radix tree there, or duplication of its code here in shmem.c. I believe that the simplications and memory savings (and probable higher performance, not yet measured) justify that. Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix nodes that cannot be freed under memory pressure - whereas before it was the less precious highmem swap vector pages that could not be freed. I'm hoping that 64-bit has now been accessible for long enough, that the highmem argument has grown much less persuasive. Three, that swapoff is slower than it used to be on tmpfs files, since it's using a simple generic mechanism not tailored to it: I find this noticeable, and shall want to improve, but maybe nobody else will notice. So... now remove most of the old swap vector code from shmem.c. But, for the moment, keep the simple i_direct vector of 16 pages, with simple accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation to help mark where swap needs to be handled in subsequent patches. Signed-off-by:
-
Hugh Dickins authored
If swap entries are to be stored along with struct page pointers in a radix tree, they need to be distinguished as exceptional entries. Most of the handling of swap entries in radix tree will be contained in shmem.c, but a few functions in filemap.c's common code need to check for their appearance: find_get_page(), find_lock_page(), find_get_pages() and find_get_pages_contig(). So as not to slow their fast paths, tuck those checks inside the existing checks for unlikely radix_tree_deref_slot(); except for find_lock_page(), where it is an added test. And make it a BUG in find_get_pages_tag(), which is not applied to tmpfs files. A part of the reason for eliminating shmem_readpage() earlier, was to minimize the places where common code would need to allow for swap entries. The swp_entry_t known to swapfile.c must be massaged into a slightly different form when stored in the radix tree, just as it gets massaged into a pte_t when stored in page tables. In an i386 kernel this limits its information (type and page offset) to 30 bits: given 32 "types" of swapfile and 4kB pagesize, that's a maximum swapfile size of 128GB. Which is less than the 512GB we previously allowed with X86_PAE (where the swap entry can occupy the entire upper 32 bits of a pte_t), but not a new limitation on 32-bit without PAE; and there's not a new limitation on 64-bit (where swap filesize is already limited to 16TB by a 32-bit page offset). Thirty areas of 128GB is probably still enough swap for a 64GB 32-bit machine. Provide swp_to_radix_entry() and radix_to_swp_entry() conversions, and enforce filesize limit in read_swap_header(), just as for ptes. Signed-off-by:
-
Hugh Dickins authored
A patchset to extend tmpfs to MAX_LFS_FILESIZE by abandoning its peculiar swap vector, instead keeping a file's swap entries in the same radix tree as its struct page pointers: thus saving memory, and simplifying its code and locking. This patch: The radix_tree is used by several subsystems for different purposes. A major use is to store the struct page pointers of a file's pagecache for memory management. But what if mm wanted to store something other than page pointers there too? The low bit of a radix_tree entry is already used to denote an indirect pointer, for internal use, and the unlikely radix_tree_deref_retry() case. Define the next bit as denoting an exceptional entry, and supply inline functions radix_tree_exception() to return non-0 in either unlikely case, and radix_tree_exceptional_entry() to return non-0 in the second case. If a subsystem already uses radix_tree with that bit set, no problem: it does not affect internal workings at all, but is defined for the convenience of those storing well-aligned pointers in the radix_tree. The radix_tree_gang_lookups have an implicit assumption that the caller can deduce the offset of each entry returned e.g. by the page->index of a struct page. But that may not be feasible for some kinds of item to be stored there. radix_tree_gang_lookup_slot() allow for an optional indices argument, output array in which to return those offsets. The same could be added to other radix_tree_gang_lookups, but for now keep it to the only one for which we need it. Signed-off-by:
-
Andrew Morton authored
i386 allmodconfig: drivers/built-in.o: In function `aat2870_bl_remove': aat2870_bl.c:(.text+0x414f9): undefined reference to `backlight_device_unregister' drivers/built-in.o: In function `aat2870_bl_probe': aat2870_bl.c:(.text+0x418fc): undefined reference to `backlight_device_register' aat2870_bl.c:(.text+0x41a31): undefined reference to `backlight_device_unregiste Cc: Jin Park <jinyoungp@nvidia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Axel Lin authored
- Current implementation tests wrong value for setting aat2870_bl->max_current. - In the current implementation, we cannot differentiate between 2 cases: a) if pdata->max_current is not set , or b) pdata->max_current is set to AAT2870_CURRENT_0_45 (which is also 0). Fix it by setting AAT2870_CURRENT_0_45 to be 1 and adjust the equation in aat2870_brightness() accordingly. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Tested-by:
Jin Park <jinyoungp@nvidia.com> Signed-off-by:
-
Axel Lin authored
backlight_device_register() returns ERR_PTR() on error. Signed-off-by:
-
WANG Cong authored
Fix: arch/cris/arch-v10/kernel/irq.c:239: error: implicit declaration of function 'kgdb_init' arch/cris/arch-v10/kernel/irq.c:240: error: implicit declaration of function 'breakpoint' Declare these two functions. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: <stable@kernel.org> Signed-off-by:
-
WANG Cong authored
Fix: arch/cris/arch-v10/drivers/sync_serial.c:961: error: conflicting types for 'sync_serial_ioctl' Reported-by:
-
WANG Cong authored
Fix: arch/cris/arch-v10/drivers/sync_serial.c:628: error: 'ret' undeclared (first use in this function) 'ret' should be 'err'. Reported-by:
-
WANG Cong authored
Fix this error: kernel/fork.c:267: error: implicit declaration of function 'alloc_thread_info_node' This is due to renaming alloc_thread_info() to alloc_thread_info_node(). [akpm@linux-foundation.org: coding-style fixes] Reported-by:
-
Randy Dunlap authored
Fix tpm_tis.c build when CONFIG_ACPI is not enabled by providing a stub function. Fixes many build errors/warnings: drivers/char/tpm/tpm_tis.c:89: error: dereferencing pointer to incomplete type drivers/char/tpm/tpm_tis.c:89: warning: type defaults to 'int' in declaration of 'type name' drivers/char/tpm/tpm_tis.c:89: error: request for member 'list' in something not a structure or union ... Signed-off-by:
-
Johannes Weiner authored
__GFP_OTHER_NODE is used for NUMA allocations on behalf of other nodes. It's supposed to be passed through from the page allocator to zone_statistics(), but it never gets there as gfp_allowed_mask is not wide enough and masks out the flag early in the allocation path. The result is an accounting glitch where successful NUMA allocations by-agent are not properly attributed as local. Increase __GFP_BITS_SHIFT so that it includes __GFP_OTHER_NODE. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Andi Kleen <ak@linux.intel.com> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Sergiu Iordache authored
Update the module parameters when platform data is used. This means that they can be read from /sys/module/ramoops/parameters in order to parse the memory area. Signed-off-by:
Sergiu Iordache <sergiu@chromium.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by:
-
Will Drewry authored
Update kernel-parameters.txt to point users to the authoritative comment for name_to_dev_t. In addition, updates other places where some name_to_dev_t behavior was discussed. All other references to root= appear to be for explicit sample usage or just side comments when discussing other kernel parameters. Signed-off-by:
Will Drewry <wad@chromium.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
