- 01 Jul, 2020 27 commits
-
-
Alex Elder authored
Reuse the "limit" local variable in ipa_endpoint_init_aggr() when setting the aggregation size limit. Simple cleanup. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Halve the time limit used when aggregation is enabled on an RX endpoint, to half a millisecond. Use DIV_ROUND_CLOSEST() to compute the value that represents the time period, to get better accuracy in the event the time limit is not an even multiple of the granularity. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alex Elder authored
The timer used for aggregation makes use of an internal 32 KHz clock. The granularity of the timer is programmed by a field whose value is computed by ipa_aggr_granularity_val(). Redefine the way that value is computed by using a new TIMER_FREQUENCY constant representing the underlying clock frequency. Add two BUILD_BUG_ON() calls to ensure the value used is valid. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Denis Kirjanov says: ==================== xen networking: add XDP support to xen-netfront The first patch adds a new extra type to enable proper synchronization between an RX request/response pair. The second patch implements BFP interface for xen-netfront. The third patch enables extra space for XDP processing. v14: - fixed compilation warnings v13: - fixed compilation due to previous rename v12: - xen-netback: rename netfront_xdp_headroom to xdp_headroom v11: - add the new headroom constant to netif.h - xenbus_scanf check - lock a bulk of puckets in xennet_xdp_xmit() v10: - add a new xen_netif_extra_info type to enable proper synchronization between an RX request/response pair. - order local variable declarations v9: - assign an xdp program before switching to Reconfiguring - minor cleanups - address checkpatch issues v8: - add PAGE_POOL config dependency - keep the state of XDP processing in netfront_xdp_enabled - fixed allocator type in xdp_rxq_info_reg_mem_model() - minor cleanups in xen-netback v7: - use page_pool_dev_alloc_pages() on page allocation - remove the leftover break statement from netback_changed v6: - added the missing SOB line - fixed subject v5: - split netfront/netback changes - added a sync point between backend/frontend on switching to XDP - added pagepool API v4: - added verbose patch descriprion - don't expose the XDP headroom offset to the domU guest - add a modparam to netback to toggle XDP offset - don't process jumbo frames for now v3: - added XDP_TX support (tested with xdping echoserver) - added XDP_REDIRECT support (tested with modified xdp_redirect_kern) - moved xdp negotiation to xen-netback v2: - avoid data copying while passing to XDP - tell xen-netback that we need the headroom space ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
the patch basically adds the offset adjustment and netfront state reading to make XDP work on netfront side. Reviewed-by:
Paul Durrant <paul@xen.org> Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
The patch adds a basic XDP processing to xen-netfront driver. We ran an XDP program for an RX response received from netback driver. Also we request xen-netback to adjust data offset for bpf_xdp_adjust_head() header space for custom headers. synchronization between frontend and backend parts is done by using xenbus state switching: Reconfiguring -> Reconfigured- > Connected UDP packets drop rate using xdp program is around 310 kpps using ./pktgen_sample04_many_flows.sh and 160 kpps without the patch. Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
The patch adds a new extra type to be able to diffirentiate between RX responses on xen-netfront side with the adjusted offset required for XDP processing. The offset value from a guest is passed via xenstore. Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vaibhav Gupta says: ==================== net: ethernet: use generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks from net ethernet drivers. The callbacks performing suspend() and resume() operations are still calling pci_save_state(), pci_set_power_state(), etc. and handling the power management themselves, which is not recommended. The conversion requires the removal of the those function calls and change the callback definition accordingly and make use of dev_pm_ops structure. All patches are compile-tested only. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable_device, which is not recommended. Hence, removed. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Use "struct dev_pm_ops" variable to bind the callbacks. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable_wake(), pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Use "struct dev_pm_ops" variable to bind the callbacks. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable/disable_device(), pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable/disable_device(), pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver defined empty-body .suspend() and .resume() callbacks earlier. They can now be define NULL and bind with "struct dev_pm_ops" variable. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable/disable_device(), pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vaibhav Gupta authored
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. And they use PCI helper functions to do it. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In this driver: typhoon_resume() calls typhoon_wakeup() which then calls PCI helper functions pci_set_power_state() and pci_restore_state(). The only other function, using typhoon_wakeup() is typhoon_open(). Thus remove the pci_*() calls from tyhpoon_wakeup() and place them in typhoon_open(), maintaining the order, to retain the normal behavior of the function Now, typhoon_suspend() calls typhoon_sleep() which then calls PCI helper functions pci_enable_wake(), pci_disable_device() and pci_set_power_state(). Other functions: - typhoon_open() - typhoon_close() - typhoon_init_one() are also invoking typhoon_sleep(). Thus, in this case, cannot simply move PCI helper functions call. Hence, define a new function typhoon_sleep_early() which will do all the operations, which typhoon_sleep() was doing before calling PCI helper functions. Now typhoon_sleep() will call typhoon_sleep_early() to do those tasks, hence, the behavior for _open(), _close and _init_one() remain unchanged. And typhon_suspend() only requires typhoon_sleep_early(). Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hulk Robot authored
Fix sparse build warning: drivers/net/ethernet/qlogic/qed/qed_main.c:2480:6: warning: symbol 'qed_hw_err_type_descr' was not declared. Should it be static? Signed-off-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: add mirror action support for TC-MATCHALL This series of patches add support to mirror all ingress traffic for TC-MATCHALL ingress offload. Patch 1 adds support to dynamically create a mirror Virtual Interface (VI) that accepts all mirror ingress traffic when mirror action is set in TC-MATCHALL offload. Patch 2 adds support to allocate mirror Rxqs and setup RSS for the mirror VI. Patch 3 adds support to replicate all the main VI configuration to mirror VI. This includes replicating MTU, promiscuous mode, all-multicast mode, and enabled netdev Rx feature offloads. v3: - Replace mirror VI refcount_t with normal u32 variable in all patches. - Add back calling cxgb4_port_mirror_start() in cxgb_open(), which was there in v1, but got missed in v2 during refactoring, in patch 3. v2: - Add mutex to protect all mirror VI data, instead of just mirror Rxqs, in patch 1 and 2. - Remove the un-needed mirror Rxq mutex in patch 2. - Simplify the replication code by refactoring t4_set_rxmode() to handle mirror VI, instead of duplicating the t4_set_rxmode() calls in multiple places in patch 3. ==================== Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
When mirror VI is enabled, replicate various VI config params enabled on main VI to mirror VI. These include replicating MTU, promiscuous mode, all-multicast mode, and enabled netdev Rx feature offloads. v3: - Replace mirror VI refcount_t with normal u32 variable. - Add back calling cxgb4_port_mirror_start() in cxgb_open(), which was there in v1, but got missed in v2 during refactoring. v2: - Simplify the replication code by refactoring t4_set_rxmode() to handle mirror VI, instead of duplicating the t4_set_rxmode() calls in multiple places. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
When mirror VI is enabled, allocate the mirror Rxqs and setup the mirror VI RSS table. The mirror Rxqs are allocated/freed when the mirror VI is created/destroyed or when underlying port is brought up/down, respectively. v3: - Replace mirror VI refcount_t with normal u32 variable. v2: - Use mutex to protect all mirror VI data, instead of just mirror Rxqs. - Remove the un-needed mirror Rxq mutex. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
Add mirror Virtual Interface (VI) support to receive all ingress mirror traffic from the underlying device. The mirror VI is created dynamically, if the TC-MATCHALL rule has a corresponding mirror action. Also request MSI-X vectors needed for the mirror VI Rxqs. If no vectors are available, then disable mirror VI support. v3: - Replace mirror VI refcount_t with normal u32 variable. v2: - Add mutex to protect all mirror VI data, instead of just mirror Rxqs. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
In certain configurations without power management support, the following warnings happen: ../drivers/net/ethernet/amd/pcnet32.c:2928:12: warning: 'pcnet32_pm_resume' defined but not used [-Wunused-function] 2928 | static int pcnet32_pm_resume(struct device *device_d) | ^~~~~~~~~~~~~~~~~ ../drivers/net/ethernet/amd/pcnet32.c:2916:12: warning: 'pcnet32_pm_suspend' defined but not used [-Wunused-function] 2916 | static int pcnet32_pm_suspend(struct device *device_d) | ^~~~~~~~~~~~~~~~~~ Mark these functions as __maybe_unused to make it clear to the compiler that this is going to happen based on the configuration, which is the standard for these types of functions. Fixes: a86688fb ("pcnet32: Convert to generic power management") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
In certain configurations without power management support, the following warnings happen: ../drivers/net/ethernet/amd/amd8111e.c:1623:12: warning: 'amd8111e_resume' defined but not used [-Wunused-function] 1623 | static int amd8111e_resume(struct device *dev_d) | ^~~~~~~~~~~~~~~ ../drivers/net/ethernet/amd/amd8111e.c:1584:12: warning: 'amd8111e_suspend' defined but not used [-Wunused-function] 1584 | static int amd8111e_suspend(struct device *dev_d) | ^~~~~~~~~~~~~~~~ Mark these functions as __maybe_unused to make it clear to the compiler that this is going to happen based on the configuration, which is the standard for these types of functions. Fixes: 2caf751f ("amd8111e: Convert to generic power management") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 30 Jun, 2020 13 commits
-
-
David S. Miller authored
Bartosz Golaszewski says: ==================== net: improve devres helpers So it seems like there's no support for relaxing certain networking devres helpers to not require previously allocated structures to also be managed. However the way mdio devres variants are implemented is still wrong and I modified my series to address it while keeping the functions strict. First two patches modify the ixgbe driver to get rid of the last user of devm_mdiobus_free(). Patches 3, 4, 5 and 6 are mostly cosmetic. Patch 7 fixes the way devm_mdiobus_register() is implemented. Patches 8 & 9 provide a managed variant of of_mdiobus_register() and last patch uses it in mtk-star-emac driver. v1 -> v2: - drop the patch relaxing devm_register_netdev() - require struct mii_bus to be managed in devm_mdiobus_register() and devm_of_mdiobus_register() but don't store that information in the structure itself: use devres_find() instead ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
Shrink the code by using the managed variant of of_mdiobus_register(). Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
Implement a managed variant of of_mdiobus_register(). We need to make mdio_devres into its own module because otherwise we'd hit circular sumbol dependencies between phylib and of_mdio. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
The 'extern' keyword in headers doesn't have any benefit. Remove them all from the of_mdio.h header. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
We currently have two managed helpers for mdiobus - devm_mdiobus_alloc() and devm_mdiobus_register(). The idea behind devres is that the release callback releases whatever resource the devm function allocates. In the mdiobus case however there's no devres associated with the device by devm_mdiobus_register(). Instead the release callback for devm_mdiobus_alloc(): _devm_mdiobus_free() unregisters the device if it is marked as managed. This all seems wrong. The managed structure shouldn't need to know or care about whether it's managed or not - and this is the case now for struct mii_bus. The devres wrapper should be opaque to the managed resource. This changeset makes devm_mdiobus_alloc() and devm_mdiobus_register() conform to common devres standards: devm_mdiobus_alloc() allocates a devres structure and registers a callback that will call mdiobus_free(). __devm_mdiobus_register() allocated another devres and registers a callback that will unregister the bus. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
This function is not documented. Add a short kerneldoc description. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
Functions should only be static inline if they're very short. This devres helper is already over 10 lines and it will grow soon as we'll be improving upon its approach. Pull it into mdio_devres.c. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
We have a devres variant of mdiobus_register() but it's not listed in devres.rst. Add it under other mdio devm functions. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
Make it an explicit counterpart to devm_register_netdev() just like we do with devm_free_netdev() for better clarity. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
The idea behind devres is that the release callbacks are called if probe fails. As we now check the return value of ixgbe_mii_bus_init(), we can drop the call devm_mdiobus_free() in error path as the release callback will be called automatically. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
This function may fail. Check its return value and propagate the error code. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nirranjan Kirubaharan authored
Find ports accessible by the VF, based on the index of the mac address stored for the VF in the adapter. If no mac address is stored for the VF, use the port mask provided by firmware. Signed-off-by:
Nirranjan Kirubaharan <nirranjan@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alexander Lobakin says: ==================== net: qed/qede: license cleanup QLogic QED drivers source code is dual licensed under GPL-2.0/BSD-3-Clause. Correct already existing but wrong SPDX tags to match the actual license. Remove the license boilerplates and replace them with the correct SPDX tag. Update copyright years in all source files. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-