- 04 Dec, 2009 40 commits
-
-
Swen Schillig authored
The port_scan work was scheduled to the work_queue provided by the kernel. This resulted on SMP systems to a likely situation that more than one scan_work were processed in parallel. This is not required and openes the possibility of race conditions between the removal of invalid ports and the enqueue of just scanned ports. This patch synchronizes the scan_work tasks by scheduling them to adapter local work_queue. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Swen Schillig authored
The flag ZFCP_STATUS_COMMON_REMOVE was used to indicate that a resource is not ready to be used or about to be removed from the system. This is now better done by an improved list handling and therefore the additional indicator is not required anymore. Signed-off-by:
-
Christof Schmitt authored
With the reference counting for zfcp data structures, it is now possible to implement module unloading again. Module unloading requires to free all data structures in the module exit function. This is done by unregistering zfcp from s390 cio and the SCSI midlayer first in the module exit function. Reviewed-by:
-
Christof Schmitt authored
The latencies traced per fsf request are traced for sysfs output and for blktrace, each in one function. Simplify the tracing code by merging both tracing functions into one. Reviewed-by:
-
Christof Schmitt authored
When accessing port and unit attributes, use container_of instead of dev_get_drvdata. This eliminates some code checker warnings about aliased access of data structures. Reviewed-by:
-
Swen Schillig authored
The callback for suspend is not required because it contains exactly the same functionality as the _set_offline routine does. Signed-off-by:
-
Swen Schillig authored
The global config_mutex was required for the serialization of a configuration change within the zfcp driver. This global locking is now obsolete and can be removed. The requirement of serializing the access to a zfcp_adapter reference via a ccw_device is realized wth a static spinlock. Signed-off-by:
-
Swen Schillig authored
Replace the local reference counting by already available mechanisms offered by kref. Where possible existing device structures were used, including the same functionality. Signed-off-by:
-
Swen Schillig authored
The global config_lock was used to protect the configuration organized in independent lists. It is not necessary to have a lock on driver level for this purpose. This patch replaces the global config_lock with a set of local list locks. Signed-off-by:
-
Christof Schmitt authored
While the target reset task management function has been deprecated in newer specs, it is still in use by SCSI FC drivers and there is no real replacement. Add the target reset flag to the FCP header file to allow usage of this definition in SCSI FC drivers. Reviewed-by:
-
Yi Zou authored
Upon receiving ELS_RLS, send the Link Error Status Block (LESB) back. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Yi Zou authored
Add a member function pointer as get_lesb to libfc_function_template so LLD can fill the LESB based on its own statistics. For fcoe, it fills the LESB as a fcoe_fc_els_lesb struct according to FC-BB-5. Signed-off-by:
-
Yi Zou authored
Add struct fcoe_fc_els_lesb as described in FC-BB-5 LESB for FCoE. It has the same size as LESB defined in FC-FS-3 (struct fc_els_lesb) but members have different meanings according to FC-BB-5. Signed-off-by:
-
Yi Zou authored
Add tracking the Missing Discovery Advertisement count for FIP Fiber Channel Forwarder (FCF) as described in FC-BB-5 Rev2.0 for LESB. The time is 1.5 times the FKA_ADV_PERIOD of the corresponding FCF. Signed-off-by:
-
Yi Zou authored
Add tracking the Virtual Link Failure count when either we have found the FCF as "aged" or we are receiving FIP Clear Virtual Link from the FCF. Signed-off-by:
-
Yi Zou authored
When the D bit is set if the FKA_ADV_Period of the FIP Discovery Advertisement, the ENode should not transmit period ENode FIP Keep Alive and VN_Port FIP Keep Alive (FC-BB-5 Rev2, 7.8.3.13). Note that fcf->flags is taken directly from the fip_header, I am claiming one bit for the purpose of the FIP_FKA_Period D bit as FIP_FL_FK_ADV_B, and use FIP_HEADER_FLAGS as bitmask for bits used in fip_header. Signed-off-by:
-
Yi Zou authored
FC-BB-5 Rev2.0, Clause 7.10 extends the FC-LS-3 LESB for FC-BB_E. We are already tracking Link Failure Count so add the rest in this patch. For VLinkFailureCount and MissDiscAdvCount, they are part of the per-cpu fcoe_dev_stats. For SymbolErrorCount, ErroredBlockCount, and FCSErrorCount, they are defined in IEEE 802.3-2008 and are per LLD. They are expected to come from LLD. Signed-off-by:
-
Chris Leech authored
Allow FCP frames to bypass the FCoE receive processing threads and handle them directly in softirq context, if they are received on the correct CPU. This preserves the queuing to threads for scaling out receive processing to multiple CPUs, but allows FCoE-aware multi-queue network drivers that direct frames to the originating CPUs to handle FCP processing with less scheduling latency. Only FCP is handled directly, because libfc makes use of mutexes in ELS handling routines. The bulk of this change is just moving the FCoE receive processing out of the receive thread function, leaving behind just the thread and queue management. The interesting bits are in fcoe_rcv() Signed-off-by:
Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Yi Zou authored
Frame header room is already incluced, just pass the length of payload. Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Hardware related Fixes and Changes. - Added new Adapter IDs and update default Adapter names. - Added PCI read after EQarm doorbell PCI write to flush the write and avoid spurrious interrupts when in INTx mode. - Phase out use of ONLINE registers. - Fix for lost MSI interrupt Signed-off-by:
-
James Smart authored
Fix errors relating to crashes and hangs. - Fix crash due to list corruption while unloading driver. - Fix panic during pci-hot-plug testing. - Fix panic when unmapping luns. - Fixed total_scsi_bufs counting could cause exhausted memory. - Fixed locking issue causing hang. - Fixed the call from lpfc_new_scsi_buf_s3 to use lpfc_release_scsi_buf_s3. Signed-off-by:
-
James Smart authored
Fix AER issues. - Made AER sysfs entry point return "Operation not permitted" to OneConnect HBAs - Stop and abort all I/Os on HBA for AER uncorrectable non-fatal error handling Signed-off-by:
-
James Smart authored
FC protocol fixes. - Fix send sequence logic to handle multi SGL IOCBs. - Fix FDISC completion always setting VPORT state to failed. - Ported the fix on reporting of max_vpi to uppper layer. - Fix incorrect number of Vports allowed to be created. - Fixed Dead FCoE port after creating vports. - Added handling of ELS request for Reinstate Recovery Qualifier (RRQ) - Handle unsolicited CT exchange initiator receiving CT exchange ABTS - Migrate LUN queue depth ramp up code to scsi mid-layer. - Made ABTS WQE go to the same WQ as the WQE to be aborted. - Fix Vport does not rediscover after FCF goes away. - Fixed lpfc_unreg_vfi failure after devloss timeout. - Fixed RPI bit leak. - Fix hbq pointer corruption during target discovery. Signed-off-by:
-
James Smart authored
FCoE Protocol fixes. - Fixed FIP frame designation for ELS commands. - Fix CVL received on Port 1 not processed by driver. - Fix Zeroed frame on wire after FLOGI - Fix vport keep-alive does not contain the correct WWN. Signed-off-by:
-
Roel Kluin authored
value cannot logically be less than START and greater than BUFFERSIZE. #define EXTENDED_SENSE_START 18 // vi include/scsi/scsi_cmnd.h +105 #define SCSI_SENSE_BUFFERSIZE 96 [akpm@linux-foundation.org: fix warning] Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Randy Dunlap authored
Fix scsi_devinfo.c kernel-doc function names to match actual function names. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Martin Michlmayr authored
include/scsi/osd_protocol.h uses ALIGN() without an #include <linux/kernel.h>, leading to: | include/scsi/osd_protocol.h:362: error: implicit declaration of function 'ALIGN' Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by:
-
Boaz Harrosh authored
Administer some love to the osd_req_decode_sense function * Fix a bad bug with osd_req_decode_sense(). If there was no scsi residual, .i.e the request never reached the target, then all the osd_sense_info members where garbage. * Add grossly missing in/out_resid to osd_sense_info and fill them in properly. * Define an osd_err_priority enum which divides the possible errors into 7 categories in ascending severity. Each category is also assigned a Linux return code translation. Analyze the different osd/scsi/block returned errors and set the proper osd_err_priority and Linux return code accordingly. * extra check a few situations so not to get stuck with inconsistent error view. Example an empty residual with an error code, and other places ... Lots of libosd's osd_req_decode_sense clients had this logic in some form or another. Consolidate all these into one place that should actually know about osd returns. Thous translating it to a more abstract error. Signed-off-by:
-
Boaz Harrosh authored
When an error was detected in an attribute list do to a target bug. We would print an error but spin endlessly regardless. Fix it. Signed-off-by:
-
Boaz Harrosh authored
The (never tested) osd_sense_attribute_identification case has never worked. The loop was never advanced on. Fix it to work as intended. On 10/30/2009 04:39 PM, Roel Kluin wrote: I found this by code analysis, searching for while loops that test a local variable, but do not modify the variable. Reported-by:
-
Boaz Harrosh authored
Define an osd_dev_info structure that Uniquely identifies an OSD device lun on the network. The identification is built from unique target attributes and is the same for all network/SAN machines. osduld_info_lookup() - NEW New API that will lookup an osd_dev by its osd_dev_info. This is used by pNFS-objects for cross network global device identification. And by exofs multy-device support, the device info is specified in the on-disk exofs device table. osduld_device_info() - NEW Given an osd_dev handle returns its associated osd_dev_info. The ULD fetches this information at startup and hangs it on each OSD device. (This is a fast operation that can be called at any condition) osduld_device_same() - NEW With a given osd_dev at one hand and an osd_dev_info at another, we would like to know if they are the same device. Two osd_dev handles can be checked by: osduld_device_same(od1, osduld_device_info(od2)); osd_auto_detect_ver() - REVISED Now returns an osd_dev_info structure. Is only called once by ULD as before. See added comments for how to use. Signed-off-by: -
Boaz Harrosh authored
The true logic of this patch will be clear in the next patch where we use the class_find_device() API. When doing so the use of an internal kref leaves us a narrow window where a find is started while the actual object can go away. Using the device's kobj reference solves this problem because now the same kref is used for both operations. (Remove and find) Core changes * Embed a struct device in uld_ structure and use device_register instead of devie_create. Set __remove to be the device release function. * __uld_get/put is just get_/put_device. Now every thing is accounted for on the device object. Internal kref is removed. * At __remove() we can safely de-allocate the uld_ structure. (The function has moved to avoid forward declaration) Some cleanups * Use class register/unregister is cleaner for this driver now. * cdev ref-counting games are no longer necessary I have incremented the device version string in case of new bugs. Note: Previous bugfix of taking the reference around fput() still applies. Signed-off-by: -
Boaz Harrosh authored
If scsi has released the device (logout), and exofs has last reference on the osduld_device it will be freed by osd_uld_release() within the call to fput(). But this will oops in cdev_release() which is called after the fops->release. (cdev is embedded within osduld_device). __uld_get/put pair makes sure we have a cdev for the duration of fput() Signed-off-by:
-
Boaz Harrosh authored
Add one more important cdb_field_offset that can be returned with scsi_invalid_field_in_cdb. It is the offset of the permissions_bit_mask field in the capabilities structure. Interestingly, the offset is the same for V1/V2 Signed-off-by:
-
Boaz Harrosh authored
define a new osd_dev_is_ver1 that operates on devices and the old osd_req_is_ver1 uses that new API. Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
[SCSI] lpfc 8.3.5: fix fcp command polling, add FIP mode, performance optimisations and devloss timout fixes This patch includes the following changes: - Fixed Panic/Hang when using polling mode for fcp commands - Added support for Read_rev mbox bits indicating FIP mode of HBA - Optimize performance of slow-path handling of els responses - Add code to cleanup orphaned unsolicited receive sequences - Fixed Devloss timeout when multiple initiators are in same zone Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by:
-
