Removes codestyle issues in dc_link file, on dc_link_construct and
translate_encoder_to_transmitter as suggested by checkpatch.pl.

Types covered:

CHECK: Lines should not end with a '('
WARNING: Missing a blank line after declarations
CHECK: Alignment should match open parenthesis
CHECK: Comparison to NULL could be written
CHECK: Logical continuations should be on the previous line
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Removes codestyle issues on the file dc_link between is_same_edid and
get_ddc_line as suggested by checkpatch.pl.

Types covered:

CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Blank lines aren't necessary before a close brace '}'
WARNING: braces {} are not necessary for single statement blocks
CHECK: Comparison to NULL could be written
CHECK: Lines should not end with a '('
CHECK: Alignment should match open parenthesis
CHECK: Using comparison to false is error prone
CHECK: Using comparison to true is error prone
WARNING: Avoid multiple line dereference - prefer 'link->dpcd_caps.sink_count.bits.SINK_COUNT'
CHECK: Unnecessary parentheses around
WARNING: Missing a blank line after declarations
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Removes codestyle issues on the file dc_link until detect_dp func as
suggested by checkpatch.pl.

Types covered:

CHECK: Please don't use multiple blank lines
CHECK: Comparison to NULL could be written
ERROR: space required before the open parenthesis '('
CHECK: Alignment should match open parenthesis
CHECK: Lines should not end with a '('
WARNING: please, no space before tabs
WARNING: Comparisons should place the constant on the right side of the test
WARNING: braces {} are not necessary for single statement blocks
CHECK: Please don't use multiple blank lines
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Solve comments alignment problems on dc_link file
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable VCN2.5 DPG mode for arcturus after below items are applied.
ASD: 0x21000023
SOS: 0x17003B
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16
VBIOS: 23
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add firmware write/read point reset sync through shared memory
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add firmware write/read point reset sync through shared memory
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Added firmware share memory support for VCN. Current multiple
queue mode is enabled only.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Couldn't only rely on enc fence to decide switching to dpg unpaude mode.
Since a enc thread may not schedule a fence in time during multiple
threads running situation.

v3: 1. Rename enc_submission_cnt to dpg_enc_submission_cnt
    2. Add dpg_enc_submission_cnt check in idle_work_handler

v4:  Remove extra counter check, and reduce counter before idle
    work schedule
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix race condition issue when multiple vcn starts are called.

v2: Removed checking the return value of cancel_delayed_work_sync()
to prevent possible races here.

v3: Add total_submission_cnt to avoid gate power unexpectedly.

v4: Remove extra counter check, and reduce counter before idle
work schedule
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Due to the new L1.0b0c011b policy, many SDMA registers are blocked which raise
the violation warning. There are total 6 pair register needed to be skipped
when driver init and de-init.
mmSDMA0/1_CNTL
mmSDMA0/1_F32_CNTL
mmSDMA0/1_UTCL1_PAGE
mmSDMA0/1_UTCL1_CNTL
mmSDMA0/1_CHICKEN_BITS,
mmSDMA0/1_SEM_WAIT_FAIL_TIMER_CNTL

v2: squash in warning fix
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When we stop the HW for example for GPU reset we should not stop the
front-end scheduler. Otherwise we run into intermediate failures during
command submission.

The scheduler should only be stopped in very few cases:
1. We can't get the hardware working in ring or IB test after a GPU reset.
2. The KIQ scheduler is not used in the front-end and should be disabled during GPU reset.
3. In amdgpu_ring_fini() when the driver unloads.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Test-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This could avoid the possible race condition.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This can avoid potential race condition between them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for coming lock protection for SMU message issuing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for coming lock protection for SMU message issuing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for coming lock protection for SMU message issuing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for coming lock protection for SMU message issuing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop unused smu7 message APIs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for coming lock protection for SMU message issuing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for coming lock protection for SMU message issuing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Due Page faults can easily overwhelm the interrupt handler.
So to make sure that we never lose valuable interrupts on the primary ring
we re-route page faults to IH ring 1.
It also facilitates the recovery page process, since it's already
running from a process context.
This is valid for Arcturus and future Navi generation GPUs.

[How]
Setting IH_CLIENT_CFG_DATA for VMC and UMD IH clients.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

call psp to program ih cntl in SR-IOV if supported on Navi and Arcturus.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support added into IH to enable ring1 and ring2 for navi10_ih.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
nbio v7.4 size of ih doorbell range is 64 bit. This requires 2 DWords per register.

[How]
Change ih doorbell size from 2 to 4. This means two Dwords per ring.
Current configuration uses two ih rings.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Previously these registers were set to 0. This was causing an
infinite retry on the UTCL1 RB, preventing higher priority RB such as paging RB.

[How]
Set to one the SDMAx_UTLC1_TIMEOUT registers for all SDMAs on Vega10, Vega12,
Vega20 and Arcturus.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Backtrace on gpu recover test on Navi10.

[ 1324.516681] RIP: 0010:amdgpu_ras_set_error_query_ready+0x15/0x20 [amdgpu]
[ 1324.523778] Code: 4c 89 f7 e8 cd a2 a0 d8 e9 99 fe ff ff 45 31 ff e9 91 fe ff ff 0f 1f 44 00 00 55 48 85 ff 48 89 e5 74 0e 48 8b 87 d8 2b 01 00 <40> 88 b0 38 01 00 00 5d c3 66 90 0f 1f 44 00 00 55 31 c0 48 85 ff
[ 1324.543452] RSP: 0018:ffffaa1040e4bd28 EFLAGS: 00010286
[ 1324.549025] RAX: 0000000000000000 RBX: ffff911198b20000 RCX: 0000000000000000
[ 1324.556217] RDX: 00000000000c0a01 RSI: 0000000000000000 RDI: ffff911198b20000
[ 1324.563514] RBP: ffffaa1040e4bd28 R08: 0000000000001000 R09: ffff91119d0028c0
[ 1324.570804] R10: ffffffff9a606b40 R11: 0000000000000000 R12: 0000000000000000
[ 1324.578413] R13: ffffaa1040e4bd70 R14: ffff911198b20000 R15: 0000000000000000
[ 1324.586464] FS:  00007f4441cbf540(0000) GS:ffff91119ed80000(0000) knlGS:0000000000000000
[ 1324.595434] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1324.601345] CR2: 0000000000000138 CR3: 00000003fcdf8004 CR4: 00000000003606e0
[ 1324.608694] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1324.616303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1324.623678] Call Trace:
[ 1324.626270]  amdgpu_device_gpu_recover+0x6e7/0xc50 [amdgpu]
[ 1324.632018]  ? seq_printf+0x4e/0x70
[ 1324.636652]  amdgpu_debugfs_gpu_recover+0x50/0x80 [amdgpu]
[ 1324.643371]  seq_read+0xda/0x420
[ 1324.647601]  full_proxy_read+0x5c/0x90
[ 1324.652426]  __vfs_read+0x1b/0x40
[ 1324.656734]  vfs_read+0x8e/0x130
[ 1324.660981]  ksys_read+0xa7/0xe0
[ 1324.665201]  __x64_sys_read+0x1a/0x20
[ 1324.669907]  do_syscall_64+0x57/0x1c0
[ 1324.674517]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1324.680654] RIP: 0033:0x7f44417cf081
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Clean up the smu10, smu12, and gfx9 drivers to use headers for
registers instead of hardcoding in the C source files.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We have three ib pools, they are normal, VM, direct pools.

Any jobs which schedule IBs without dependence on gpu scheduler should
use DIRECT pool.

Any jobs schedule direct VM update IBs should use VM pool.

Any other jobs use NORMAL pool.

v2: squash in coding style fix
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Can't call dmub_abm_enable_fractional_pwm from dmub_abm_create as
dmub_srv is still null at this init stage, and therefore can't call to
fw.

[How]
Move call to dmub_abm_init_backlight. This should be the first call from
the driver for ABM.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Moving ABM from DMCU to DMCUB.

[How]
Add ABM driver files and implementation.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

extend compute lockup timeout to 60000 for SR-IOV.
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Jiawei <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As no need to support vcn decode feature, so disable the
ring for SR-IOV.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

if host support new handshake we only need to enter
fullaccess_mode in ip_init() part, otherwise we need
to do it before reading vbios (becuase host prepares vbios
for VF only after received REQ_GPU_INIT event under
legacy handshake)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

what:
1)move timtout setting before ip_early_init to reduce exclusive mode
cost for SRIOV

2)move ip_discovery_init() to inside of amdgpu_discovery_reg_base_init()
it is a prepare for the later upcoming patches.

why:
in later upcoming patches we would use a new mailbox event --
"req_gpu_init_data", which is a callback hooked in adev->virt.ops and
this callback send a new event "REQ_GPU_INIT_DAT" to host to notify
host to do some preparation like "IP discovery/vbios on the VF FB"
and this callback must be:

A) invoked after set_ip_block() because virt.ops is configured during
set_ip_block()

B) invoked before ip_discovery_init() becausen ip_discovery_init()
need host side prepares everything in VF FB first.

current place of ip_discovery_init() is before we can invoke callback
of adev->virt.ops, thus we must move ip_discovery_init() to a place
after the adev->virt.ops all settle done, and the perfect place is in
amdgpu_discovery_reg_base_init()
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

by this new handshake host side can prepare vbios/ip-discovery
and pf&vf exchange data upon recieving this request without
stopping world switch.

this way the world switch is less impacted by VF's exclusive mode
request
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

what:
with the new "req_init_data" handshake we need to use mailbox
before do IP discovery, so in mxgpu_nv.c file the original
SOC15_REG method won'twork because that depends on IP discovery
complete first.

how:
so the solution is to always use static MMIO offset for NV+ mailbox
registers.
HW team confirm us all MAILBOX registers will be at the same
offset for all ASICs, no IP discovery needed for those registers
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>