- 02 Mar, 2015 17 commits
-
-
Trond Myklebust authored
This patch ensures that the superblock doesn't go ahead and disappear underneath us while the state manager thread is returning delegations. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
Ensure that nfs_inode_set_delegation() doesn't inadvertently detach a delegation that is already in the process of being returned. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Anna Schumaker authored
After 566fcec6 the client uses the "current stateid" from the nfs4_state structure to close a file. This could potentially contain a delegation stateid, which is disallowed by the protocol and causes servers to return NFS4ERR_BAD_STATEID. This patch restores the (correct) behavior of sending the open stateid to close a file. Reported-by: Olga Kornievskaia <kolga@netapp.com> Fixes: 566fcec6 (NFSv4: Fix an atomicity problem in CLOSE) Signed-off-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
put_rpccred() can sleep. Fixes: 8f649c37 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Cc: stable@vger.kernel.org # 2.6.35+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
If the server does not return a valid set of attributes that we can use to either create a file or refresh the inode, then there is no value in calling nfs_prime_dcache(). However if we're just refreshing the inode using the attributes that the server returned, then it shouldn't matter whether or not we have a filehandle, as long as we check the fsid+fileid combination. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
When we call readdirplus, set the fileid normally returned by readdir as the mounted-on-fileid, since that is commonly the case if there is a mountpoint. To ensure that we get it right, we only set the flag if the readdir fileid differs from the one returned in the readdirplus attributes. This again means that we can avoid the issues described in commit 2ef47eb1 ("NFS: Fix use of nfs_attr_use_mounted_on_fileid()"), which only fixed NFSv4. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
If we're traversing a directory which contains a submounted filesystem, or one that has a referral, the NFS server that is processing the READDIR request will often return information for the underlying (mounted-on) directory. It may, or may not, also return filehandle information. If this happens, and the lookup in nfs_prime_dcache() returns the dentry for the submounted directory, the filehandle comparison will fail, and we call d_invalidate(). Post-commit 8ed936b5 ("vfs: Lazily remove mounts on unlinked files and directories."), this means the entire subtree is unmounted. The following minimal patch addresses this problem by punting on the invalidation if there is a submount. Kudos to Neil Brown <neilb@suse.de> for having tracked down this issue (see link). Reported-by: Nix <nix@esperi.org.uk> Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nix Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
Trond Myklebust authored
Ensure that we don't regress the changes that were made to the directory. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
nfs_post_op_update_inode() is called after a self-induced attribute update. Ensure that it also sets the barrier. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
Prior to this patch, we used to always OK attribute updates that extended the file size on the assumption that we might be performing writeback. Now that we have attribute barriers to protect the writeback related updates, we should remove this hack, as it can cause truncate() operations to apparently be reverted if/when a readahead or getattr RPC call races with our on-the-wire SETATTR. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
Ensure that other operations that race with delegreturn and layoutcommit cannot revert the attribute updates that were made on the server. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
Ensure that other operations that race with our write RPC calls cannot revert the file size updates that were made on the server. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
Ensure that we update the attribute barrier even if there were no invalidations, provided that this value is newer than the old one. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
Ensure that other operations which raced with our setattr RPC call cannot revert the file attribute changes that were made on the server. To do so, we artificially bump the attribute generation counter on the inode so that all calls to nfs_fattr_init() that precede ours will be dropped. The motivation for the patch came from Chuck Lever's reports of readaheads racing with truncate operations and causing the file size to be reverted. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
Trond Myklebust authored
The O_DIRECT code will grab the inode->i_mutex and flush out buffered writes, before scheduling a read or a write. However there is no equivalent in the buffered write code to wait for O_DIRECT to complete. Fixes a reported issue in xfstests generic/133, when first performing an O_DIRECT write followed by a buffered write. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
-
- 27 Feb, 2015 1 commit
-
-
Trond Myklebust authored
The share access mode is now specified as an argument in the nfs4_opendata, and so nfs4_open_recover_helper() needs to call nfs4_map_atomic_open_share() in order to set it. Fixes: 6ae37339 ("NFSv4.1: Ask for no delegation on OPEN if using O_DIRECT") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-
- 24 Feb, 2015 1 commit
-
-
git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust authored
NFS: RDMA Client Sparse Fix #2 This patch fixes another sparse fix found by Dan Carpenter's tool. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> * tag 'nfs-rdma-for-4.0-3' of git://git.linux-nfs.org/projects/anna/nfs-rdma: xprtrdma: Store RDMA credits in unsigned variables
-
- 23 Feb, 2015 4 commits
-
-
Chuck Lever authored
Dan Carpenter's static checker pointed out: net/sunrpc/xprtrdma/rpc_rdma.c:879 rpcrdma_reply_handler() warn: can 'credits' be negative? "credits" is defined as an int. The credits value comes from the server as a 32-bit unsigned integer. A malicious or broken server can plant a large unsigned integer in that field which would result in an underflow in the following logic, potentially triggering a deadlock of the mount point by blocking the client from issuing more RPC requests. net/sunrpc/xprtrdma/rpc_rdma.c: 876 credits = be32_to_cpu(headerp->rm_credit); 877 if (credits == 0) 878 credits = 1; /* don't deadlock */ 879 else if (credits > r_xprt->rx_buf.rb_max_requests) 880 credits = r_xprt->rx_buf.rb_max_requests; 881 882 cwnd = xprt->cwnd; 883 xprt->cwnd = credits << RPC_CWNDSHIFT; 884 if (xprt->cwnd > cwnd) 885 xprt_release_rqst_cong(rqst->rq_task); Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: eba8ff66 ("xprtrdma: Move credit update to RPC . . .") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
- 22 Feb, 2015 17 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-