Last set of radeon and amdgpu changes for 4.9.  This is
mostly just the powerplay cleanup for dGPUs.  Beyond that,
just misc code cleanups and bug fixes.

* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (49 commits)
  drm/amd/amdgpu: Clean up afmt allocation in DCEv6. (v2)
  drm/amd/amdgpu: Remove division from vblank_wait
  drm/radeon/atif: Send a hotplug event when we get dgpu display request
  drm/radeon/atpx: check for ATIF dGPU wake for display events support
  drm/amdgpu/atif: Send a hotplug event when we get dgpu display request
  drm/amdgpu/atpx: check for ATIF dGPU wake for display events support
  drm/amdgpu: bump version for new vce packet support
  drm/amdgpu/vce: allow the clock table packet
  drm/amdgpu:cleanup virt related define
  drm/amdgpu: use powerplay module for dgpu in Vi.
  drm/amdgpu: set gfx clock gating for tonga/polaris.
  drm/amdgpu: set system clock gating for tonga/polaris.
  drm/amd/powerplay: export function to help to set cg by smu.
  drm/amdgpu: avoid out of bounds access on array interrupt_status_offsets
  drm/amdgpu: mark symbols static where possible
  drm/amdgpu: remove unused functions
  drm/amd/powerplay:  Replace per-asic print_performance with generic
  drm/radeon: narrow asic_init for virtualization
  drm/amdgpu:add fw version entry to info
  drm/amdgpu:determine if vPost is needed indeed
  ...

Notable changes:

- Cleanups from Fabio to some error paths and proper error propagation.

- Lots of refactoring and new code to support the new MMU version 2,
still relatively unoptimized and doesn't yet provide better process
isolation than MMUv1, but enough to get newer cores up and running.

- New hardware support: GC3000, as found on the NXP i.MX6 QuadPlus SoC.

* 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux: (25 commits)
  drm/etnaviv: mark whole context as lost in recover worker
  drm/etnaviv: record correct cmdbuf IOVA in dump
  drm/etnaviv: space out IOVA layout for cmdbufs on MMUv2
  drm/etnaviv: fix up model and revision for GC2000+
  drm/etnaviv: implement IOMMUv2 translation
  drm/etnaviv: handle MMU exception in IRQ handler
  drm/etnaviv: add flushing logic for MMUv2
  drm/etnaviv: add function to construct MMUv2 init buffer
  drm/etnaviv: map cmdbuf through MMU on version 2
  drm/etnaviv: split out iova search and MMU reaping logic
  drm/etnaviv: split out FE start
  drm/etnaviv: split out wait for gpu idle
  drm/etnaviv: move gpu_va() to etnaviv mmu
  drm/etnaviv: remove unused iommu_v2 header
  drm/etnaviv: move IOMMU domain allocation into etnaviv MMU
  drm/etnaviv: indirect IOMMU restore through etnaviv MMU
  drm/etnaviv: move linear window setup into etnaviv_iommuv1_restore
  drm/etnaviv: rename etnaviv_iommu_domain_restore to etnaviv_iommuv1_restore
  drm/etnaviv: only check if the cmdbuf is inside the linear window on MMUv1
  drm/etnaviv: only try to use the linear window on MMUv1
  ...

Merge tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

Allwinner sun4i DRM fixes for 4.9

A few fixes for the sun4i drm driver that range, including some fixes that
might prevent multiple planes from working depending on the sequence where
they are enabled.

* tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm/sun4i: Fix the high buffer address mask
  drm/sun4i: tv: Check mode pointer
  drm/sun4i: Fix formats usable by the primary plane
  drm/sun4i: dotclock: Round to closest clock rate
  drm/sun4i: Fix sparse warnings
  drm/sun4i: dotclock: Allow divider = 127
  drm/sun4i: dotclock: Fix clock rate read back calcation
  drm/sun4i: backend: remove redundant dev_err call in sun4i_backend_bind()

I've included some improvements to PSR from myself, as well as a great
series from Tomasz to clean up and tighten up vblank/flip handling.

The last patch is one from Tomeu that has been floating around for a
while, and since rockchip is one of the beneficiaries, I figured this
would be a good place to pick it up.

* 'for-next' of ssh://people.freedesktop.org/~seanpaul/dogwood:
  drm/rockchip: Balance irq refcount on failure
  drm/rockchip: Kill vop_plane_state
  drm/rockchip: Always signal event in next vblank after cfg_done
  drm/rockchip: Do not enable vblank without event
  drm/rockchip: Replace custom wait_for_vblanks with helper
  drm/rockchip: Unreference framebuffers from flip work
  drm/rockchip: Avoid race with vblank count increment
  drm/rockchip: Get rid of some unnecessary code
  drm/rockchip: Clear interrupt status bits before enabling
  drm/rockchip: Fix up bug in psr state machine
  drm/bridge: analogix_dp: Remove duplicated code
  drm/rockchip: Reduce psr flush time to 100ms
  drm/rockchip: Don't key off vblank for psr

Second attempt for 3rd drm/tilcdc pull request for v4.9.

* tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux:
  drm/tilcdc: fix wrong error handling
  drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node()
  drm/tilcdc: Remove "default" from blue-and-red-wiring property binding
  drm/tilcdc: Fix non static symbol warning
  drm/tilcdc: mark symbols static where possible
  drm/tilcdc: add missing header dependencies
  drm/tilcdc: WARN if CRTC is touched without CRTC lock
  drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable()
  drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload()
  drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()
  drm/tilcdc: Clean up LCDC functional clock rate setting code
  drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate

Here are some patches for drm-next.
It contains:
- minor fixes for typo and warning.
- sparse and coccicheck warning fixes
- bunch of patches fixing issues found while testing drm/sti with an
atomic version of weston
- the removal of the support of stih415-416 sti platform

* 'sti-drm-next-2016-09-20' of https://github.com/vinceab/linux:
  drm/sti: remove stih415-416 platform support
  drm/sti: fix compositor debugfs creation
  drm/sti: use valid video mode
  drm/sti: in crtc_atomic_flush, enable only planes of this crtc
  drm/sti: use vtg array instead of vtg_main/aux
  drm/sti: use different notifier_block for each pipe
  drm/sti: fix atomic_disable check
  drm/sti: run gdp init sequence only once
  drm/sti: run hqvdp init sequence only once
  drm/sti: fix debug logs
  drm/sti: dpms function missing for HDMI connector
  drm/sti: Fix sparse warnings
  drm: sti: fix coccicheck warnings
  drm: sti: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()

A bit smaller pull-req this time around.  Some continued DT binding
cleanup to get the corresponding dts bits merged upstream (through
other trees).  And explicit fence-fd support for submit ioctl.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: bump kernel api version for explicit fencing
  drm/msm: submit support for out-fences
  drm/msm: move fence allocation out of msm_gpu_submit()
  drm/msm: submit support for in-fences
  drm/msm: extend the submit ioctl to pass in flags
  drm/msm/mdp5: Set rotation property initial value to DRM_ROTATE_0 insted of 0
  drm/msm/hdmi: don't print error when adding i2c adapter fails
  drm/msm/mdp4: mark symbols static where possible
  drm/msm: Remove call to reservation_object_test_signaled_rcu before wait
  drm/msm/hdmi: Clean up HDMI gpio DT bindings
  drm/msm/mdp4: Fix issue with LCDC/LVDS port parsing

- more core cleanup patches to prep drm_file to be used for
  kernel-internal contexts (David Herrmann)
- more split-up+docs for drm_crtc.c
- lots of small fixes and polish all over

* tag 'topic/drm-misc-2016-09-25' of git://anongit.freedesktop.org/drm-intel: (37 commits)
  drm: bridge: analogix/dp: mark symbols static where possible
  drm/bochs: mark bochs_connector_get_modes() static
  drm/bridge: analogix_dp: Improve panel on time
  drm/bridge: analogix_dp: Don't read EDID if panel present
  drm/bridge: analogix_dp: Remove duplicated code
  Revert "drm/i2c: tda998x: don't register the connector"
  drm: Fix plane type uabi breakage
  dma-buf/sync_file: free fences array in num_fences is 1
  drm/i2c: tda998x: don't register the connector
  drm: Don't swallow error codes in drm_dev_alloc()
  drm: Distinguish no name from ENOMEM in set_unique()
  drm: Remove dirty property from docs
  drm/doc: Document color space handling
  drm: Extract drm_color_mgmt.[hc]
  drm/doc: Polish plane composition property docs
  drm: Conslidate blending properties in drm_blend.[hc]
  drm/doc: Polish for drm_plane.[hc]
  drm: Extract drm_plane.[hc]
  drm/tilcdc: Add atomic and crtc headers to crtc.c
  drm: Fix typo in encoder docs
  ...

This is amdkfd's pull request for kernel 4.9. It contains a fix to a possible
infinite loop bug and a couple of other minor "cleaning" patches.

* tag 'drm-amdkfd-next-2016-09-19' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Pass 'struct queue_propertices' by reference
  drm/amdkfd: Unify multiple calls to pr_debug() into one
  drm/amdkfd: Fix possible infinite loop
  drm/amdkfd: Reuse function to find a process through pasid
  drm/amdkfd: Add some missing memset zero'ing in queue init func
  drm/amdkfd: Tidy up kfd_generate_gpu_id() uint64_t bitshift unpack

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1053:5: warning: no previous prototype for 'analogix_dp_get_modes' [-Wmissing-prototypes]
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1097:1: warning: no previous prototype for 'analogix_dp_detect' [-Wmissing-prototypes]

In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks both functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474788764-6069-1-git-send-email-baoyou.xie@linaro.org

We get 1 warning when building kernel with W=1:
drivers/gpu/drm/bochs/bochs_kms.c:181:5: warning: no previous prototype for 'bochs_connector_get_modes' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474788334-11007-1-git-send-email-baoyou.xie@linaro.org

In order to reduce the time required to turn on the panel, this patch
makes 2 assumptions:
1- In detect(): if there's a panel, we're connected.
2- In get_modes(): if there's a panel, let the panel driver decide if
   it should prepare/unprepare in order to get the modes.

The first is straightforward, and shouldn't need further explanation. The
second should eliminate the prepare/unprepare delays from get_modes() in
most cases, since panels generally hardcode their modes in the driver as
opposed to reading EDID. If a panel does need to read EDID, it should be
responsible for ensuring it's in a state in which it can.
Signed-off-by: Sean Paul <seanpaul@chromium.org>

If there's a panel connected to the analogix_dp bridge, rely on
the panel driver for modes, rather than reading EDID *and* calling
get_modes() on the panel.

This allows panels with a valid EDID to read it in the panel driver
(e.g. simple_panel), and panels with invalid EDID to homebrew modes
in their get_modes implementation.
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Remove code for reading the EDID and DPCD fields and use the helpers
instead.

Besides the obvious code reduction, other helpers are being added to the
core that could be used in this driver and will be good to be able to
use them instead of duplicating them.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Yakir Yang <ykk@rock-chips.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>

When 'component_bind_all' fails it should not try to unbind components
in the error handling. This will produce a null pointer kernel panic when
no component exist.

This patch changes the order of the error handling. Now, it will only
unbind components if the are bound. Otherwise, the module will jump to
an error label below.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

Return directly after a memory allocation failed in this function
at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

This reverts commit 6a2925ea.

commit 6a2925ea
Author: Brian Starkey <brian.starkey@arm.com>
Date:   Mon Jul 25 11:55:48 2016 +0100

    drm/i2c: tda998x: don't register the connector

[seanpaul]
Patch isn't fully baked, and still causing problems. Revert
until this is sorted.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Turns out assuming that only stuff in uabi is uabi is a bit naive, and
we have a bunch of properties for which the enum values are placed in
random headers. A proper fix would be to split out uapi include
headers, but meanwhile sprinkle at least some warning over them.

Fixes: 532b3671 ("drm/doc: Polish for drm_plane.[hc]")
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474612525-9488-1-git-send-email-daniel.vetter@ffwll.ch

Remove "default" keyword from blue-and-red-wiring devicetree property
binding document. The code does not support and there is no intention
to support it.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

Fixes the following sparse warning:

drivers/gpu/drm/tilcdc/tilcdc_drv.c:64:5: warning:
 symbol 'tilcdc_atomic_check' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

We get 3 warnings when building kernel with W=1:
drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c:142:29: warning: no previous prototype for 'tilcdc_get_overlay' [-Wmissing-prototypes]
drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c:198:13: warning: no previous prototype for 'tilcdc_convert_slave_node' [-Wmissing-prototypes]
drivers/gpu/drm/tilcdc/tilcdc_slave_compat.c:264:12: warning: no previous prototype for 'tilcdc_slave_compat_init' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

We get 4 warnings when building kernel with W=1:
drivers/gpu/drm/tilcdc/tilcdc_tfp410.c:393:12: warning: no previous prototype for 'tilcdc_tfp410_init' [-Wmissing-prototypes]
drivers/gpu/drm/tilcdc/tilcdc_tfp410.c:398:13: warning: no previous prototype for 'tilcdc_tfp410_fini' [-Wmissing-prototypes]
drivers/gpu/drm/tilcdc/tilcdc_panel.c:443:12: warning: no previous prototype for 'tilcdc_panel_init' [-Wmissing-prototypes]
drivers/gpu/drm/tilcdc/tilcdc_panel.c:448:13: warning: no previous prototype for 'tilcdc_panel_fini' [-Wmissing-prototypes]

In fact, these functions are declared in
drivers/gpu/drm/tilcdc/tilcdc_tfp410.h,
drivers/gpu/drm/tilcdc/tilcdc_panel.h,
so this patch adds missing header dependencies.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

v2: minor build fix
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Removes division from vblank_wait for DCE v6, v8,
and v10.  Was already implemented for v11.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On PX systems, if the platform supports hotplug events ATIF while the
dGPU is powered down, handle the event and alert userspace.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some ATPX laptops implement special circuitry to generate
display hotplug events via ACPI when the dGPU is powered off.
Check if this is supported.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On PX systems, if the platform supports hotplug events ATIF while the
dGPU is powered down, handle the event and alert userspace.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some ATPX laptops implement special circuitry to generate
display hotplug events via ACPI when the dGPU is powered off.
Check if this is supported.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This packet allows the user mode driver to specify
the required performance for specific use cases.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

move virtual machine related structure to amdgpu_virt.h
easy for developer to maintain for virualization stuffs
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

delete non-pp code and files. It was just a temporary
solution and not support dynamic power management.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The check for an out of bound index into array interrupt_status_offsets
is off-by-one. Fix this and also don't compared to a hard coded array
size but use adev->mode_info.num_hpd instead.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We get 7 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1990:5: warning: no previous prototype for 'amdgpu_pre_soft_reset' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1548:5: warning: no previous prototype for 'amdgpu_connector_virtual_dpms' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1560:5: warning: no previous prototype for 'amdgpu_connector_virtual_set_property' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:330:5: warning: no previous prototype for 'amdgpu_cs_list_validate' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_virtual.c:98:6: warning: no previous prototype for 'dce_virtual_stop_mc_access' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_virtual.c:130:6: warning: no previous prototype for 'dce_virtual_resume_mc_access' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_virtual.c:136:6: warning: no previous prototype for 'dce_virtual_set_vga_render_state' [-Wmissing-prototypes]

In fact, all of the functions are only used in the file
in which they are declared and don't need a declaration,
but can be made static.

So this patch marks both functions with 'static'.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:146:5: warning: no previous prototype for 'pool_to_domain' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/cz_smc.c:104:5: warning: no previous prototype for 'cz_send_msg_to_smc_with_parameter_async' [-Wmissing-prototypes]

In fact, both functions are called by no one and not exported,
so this patch removes them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Replace per-asic print_current_performance() functions with generic
that calls read_sensor.  Tested on Tonga and Carrizo for aesthetics
and accuracy.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only needed on CIK+ due to the way pci reset is handled
by the GPU.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org