We initialise the SCTLR_EL1 value by read-modify-writeback
of the desired bits, leaving the other bits (including reserved
bits(RESx)) untouched. However, sometimes the boot monitor could
leave garbage values in the RESx bits which could have different
implications. This patch makes sure that all the bits, including
the RESx bits, are set to the proper state, except for the
'endianness' control bits, EE(25) & E0E(24)- which are set early
in the el2_setup.

Updated the state of the Bit[6] in the comment to RES0 in the
comment.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

In /proc/vmallocinfo, it's good to show the physical address
of each ioremap in vmallocinfo. Add physical address information
in arm64 ioremap.

0xffffc900047f2000-0xffffc900047f4000    8192 _nv013519rm+0x57/0xa0
[nvidia] phys=f8100000 ioremap
0xffffc900047f4000-0xffffc900047f6000    8192 _nv013519rm+0x57/0xa0
[nvidia] phys=f8008000 ioremap
0xffffc90004800000-0xffffc90004821000  135168 e1000_probe+0x22c/0xb95
[e1000e] phys=f4300000 ioremap
0xffffc900049c0000-0xffffc900049e1000  135168 _nv013521rm+0x4d/0xd0
[nvidia] phys=e0140000 ioremap
Signed-off-by: Min-Hua Chen <orca.chen@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The arm64 dump code is currently relying on some definitions which are
pulled in via transitive dependencies. It seems we have implicit
dependencies on the following definitions:

* MODULES_VADDR         (asm/memory.h)
* MODULES_END           (asm/memory.h)
* PAGE_OFFSET           (asm/memory.h)
* PTE_*                 (asm/pgtable-hwdef.h)
* ENOMEM                (linux/errno.h)
* device_initcall       (linux/init.h)

This patch ensures we explicitly include the relevant headers for the
above items, fixing the observed build issue and hopefully preventing
future issues as headers are refactored.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

PCI IO space was intended to be 16MiB, at 32MiB below MODULES_VADDR, but
commit d1e6dc91 ("arm64: Add architectural support for PCI")
extended this to cover the full 32MiB. The final 8KiB of this 32MiB is
also allocated for the fixmap, allowing for potential clashes between
the two.

This change was masked by assumptions in mem_init and the page table
dumping code, which assumed the I/O space to be 16MiB long through
seaparte hard-coded definitions.

This patch changes the definition of the PCI I/O space allocation to
live in asm/memory.h, along with the other VA space allocations. As the
fixmap allocation depends on the number of fixmap entries, this is moved
below the PCI I/O space allocation. Both the fixmap and PCI I/O space
are guarded with 2MB of padding. Sites assuming the I/O space was 16MiB
are moved over use new PCI_IO_{START,END} definitions, which will keep
in sync with the size of the IO space (now restored to 16MiB).

As a useful side effect, the use of the new PCI_IO_{START,END}
definitions prevents a build issue in the dumping code due to a (now
redundant) missing include of io.h for PCI_IOBASE.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: reorder FIXADDR and PCI_IO address_markers_idx enum]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that the create_mapping() code in mm/mmu.c is able to support
setting up kernel page tables at initcall time, we can move the whole
virtmap creation to arm64_enable_runtime_services() instead of having
a distinct stage during early boot. This also allows us to drop the
arm64-specific EFI_VIRTMAP flag.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add page protections for arm64 similar to those in arm.
This is for security reasons to prevent certain classes
of exploits. The current method:

- Map all memory as either RWX or RW. We round to the nearest
  section to avoid creating page tables before everything is mapped
- Once everything is mapped, if either end of the RWX section should
  not be X, we split the PMD and remap as necessary
- When initmem is to be freed, we change the permissions back to
  RW (using stop machine if necessary to flush the TLB)
- If CONFIG_DEBUG_RODATA is set, the read only sections are set
  read only.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When kernel text is marked as read only, it cannot be modified directly.
Use a fixmap to modify the text instead in a similar manner to
x86 and arm.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When booting with EFI, we acquire the EFI memory map after parsing the
early params. This unfortuantely renders the option useless as we call
memblock_enforce_memory_limit (which uses memblock_remove_range behind
the scenes) before we've added any memblocks. We end up removing
nothing, then adding all of memory later when efi_init calls
reserve_regions.

Instead, we can log the limit and apply this later when we do the rest
of the memblock work in memblock_init, which should work regardless of
the presence of EFI. At the same time we may as well move the early
parameter into arm64's mm/init.c, close to arm64_memblock_init.

Any memory which must be mapped (e.g. for use by EFI runtime services)
must be mapped explicitly reather than relying on the linear mapping,
which may be truncated as a result of a mem= option passed on the kernel
command line.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When remapping the UEFI memory map using ioremap_cache(), we
have to deal with potential failure. Note that, even if the
common case is for ioremap_cache() to return the existing linear
mapping of the memory map, we cannot rely on that to be always the
case, e.g., in the presence of a mem= kernel parameter.

At the same time, remove a stale comment and move the memmap code
together.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The arm64 kernel builds fine without the libgcc. Actually it should not
be used at all in the kernel. The following are the reasons indicated
by Russell King:

  Although libgcc is part of the compiler, libgcc is built with the
  expectation that it will be running in userland - it expects to link
  to a libc.  That's why you can't build libgcc without having the glibc
  headers around.

  [...]

  Meanwhile, having the kernel build the compiler support functions that
  it needs ensures that (a) we know what compiler support functions are
  being used, (b) we know the implementation of those support functions
  are sane for use in the kernel, (c) we can build them with appropriate
  compiler flags for best performance, and (d) we remove an unnecessary
  dependency on the build toolchain.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

ESR_ELx definitions clean-up from Mark Rutland.

* 'arm64/common-esr-macros' of git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux:
  arm64: kvm: decode ESR_ELx.EC when reporting exceptions
  arm64: kvm: remove ESR_EL2_* macros
  arm64: remove ESR_EL1_* macros
  arm64: kvm: move to ESR_ELx macros
  arm64: decode ESR_ELx.EC when reporting exceptions
  arm64: move to ESR_ELx macros
  arm64: introduce common ESR_ELx_* definitions

To aid the developer when something triggers an unexpected exception,
decode the ESR_ELx.EC field when logging an ESR_ELx value using the
newly introduced esr_get_class_string. This doesn't tell the developer
the specifics of the exception encoded in the remaining IL and ISS bits,
but it can be helpful to distinguish between exception classes (e.g.
SError and a data abort) without having to manually decode the field,
which can be tiresome.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

Now that all users have been moved over to the common ESR_ELx_* macros,
remove the redundant ESR_EL2 macros. To maintain compatibility with the
fault handling code shared with 32-bit, the FSC_{FAULT,PERM} macros are
retained as aliases for the common ESR_ELx_FSC_{FAULT,PERM} definitions.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

Now that all users have been moved over to the common ESR_ELx_* macros,
remove the redundant ESR_EL1 macros.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

Now that we have common ESR_ELx macros, make use of them in the arm64
KVM code. The addition of <asm/esr.h> to the include path highlighted
badly ordered (i.e. not alphabetical) include lists; these are changed
to alphabetical order.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

To aid the developer when something triggers an unexpected exception,
decode the ESR_ELx.EC field when logging an ESR_ELx value. This doesn't
tell the developer the specifics of the exception encoded in the
remaining IL and ISS bits, but it can be helpful to distinguish between
exception classes (e.g. SError and a data abort) without having to
manually decode the field, which can be tiresome.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

Now that we have common ESR_ELx_* macros, move the core arm64 code over
to them.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

Currently we have separate ESR_EL{1,2}_* macros, despite the fact that
the encodings are common. While encodings are architected to refer to
the current EL or a lower EL, the macros refer to particular ELs (e.g.
ESR_ELx_EC_DABT_EL0). Having these duplicate definitions is redundant,
and their naming is misleading.

This patch introduces common ESR_ELx_* macros that can be used in all
cases, in preparation for later patches which will migrate existing
users over. Some additional cleanups are made in the process:

* Suffixes for particular exception levelts (e.g. _EL0, _EL1) are
  replaced with more general _LOW and _CUR suffixes, matching the
  architectural intent.

* ESR_ELx_EC_WFx, rather than ESR_ELx_EC_WFI is introduced, as this
  EC encoding covers traps from both WFE and WFI. Similarly,
  ESR_ELx_WFx_ISS_WFE rather than ESR_ELx_EC_WFI_ISS_WFE is introduced.

* Multi-bit fields are given consistently named _SHIFT and _MASK macros.

* UL() is used for compatiblity with assembly files.

* Comments are added for currently unallocated ESR_ELx.EC encodings.

For fields other than ESR_ELx.EC, macros are only implemented for fields
for which there is already an ESR_EL{1,2}_* macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>

This patch adds support for cacheinfo on ARM64.

On ARMv8, the cache hierarchy can be identified through Cache Level ID
(CLIDR) register while the cache geometry is provided by Cache Size ID
(CCSIDR) register.

Since the architecture doesn't provide any way of detecting the cpus
sharing particular cache, device tree is used for the same purpose.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The cachepolicy kernel parameter was intended to aid in the debugging of
coherency issues, but it is fundamentally broken for several reasons:

 * On SMP platforms, only the boot CPU's tcr_el1 is altered. Secondary
   CPUs may therefore use differ w.r.t. the attributes they apply to
   MT_NORMAL memory, resulting in a loss of coherency.

 * The cache maintenance using flush_dcache_all (based on Set/Way
   operations) is not guaranteed to empty a given CPU's cache hierarchy
   while said CPU has caches enabled, it cannot empty the caches of
   other coherent PEs, nor is it guaranteed to flush data to the PoC
   even when caches are disabled.

 * The TLBs are not invalidated around the modification of MAIR_EL1 and
   TCR_EL1, as required by the architecture (as both are permitted to be
   cached in a TLB). This may result in CPUs using attributes other than
   those expected for some memory accesses, resulting in a loss of
   coherency.

 * Exclusive accesses are not architecturally guaranteed to function as
   expected on memory marked as Write-Through or Non-Cacheable. Thus
   changing the attributes of MT_NORMAL away from the (architecurally
   safe) defaults may cause uses of these instructions (e.g. atomics) to
   behave erratically.

Given this, the cachepolicy code cannot be used for debugging purposes
as it alone is likely to cause coherency issues. This patch removes the
broken cachepolicy code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

UEFI updates for arm64

This series consists of a reimplementation of the virtual remapping of
UEFI Runtime Services in a way that is stable across kexec, including
the required preparatory refactoring and other work to set the stage,
and some cleaning up afterwards to remove boot services memory and
identitity map handling that has now become redundant.

* tag 'for-3.20' of http://git.linaro.org/people/ard.biesheuvel/linux-arm:
  arm64/efi: remove idmap manipulations from UEFI code
  arm64/efi: remove free_boot_services() and friends
  arm64/efi: move SetVirtualAddressMap() to UEFI stub
  arm64/efi: set EFI_ALLOC_ALIGN to 64 KB
  efi: efistub: allow allocation alignment larger than EFI_PAGE_SIZE
  efi: split off remapping code from efi_config_init()
  arm64/mm: add create_pgd_mapping() to create private page tables
  arm64/mm: add explicit struct_mm argument to __create_mapping()

Now that we have moved the call to SetVirtualAddressMap() to the stub,
UEFI has no use for the ID map, so we can drop the code that installs
ID mappings for UEFI memory regions.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Now that we are calling SetVirtualAddressMap() from the stub, there is no
need to reserve boot-only memory regions, which implies that there is also
no reason to free them again later.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

In order to support kexec, the kernel needs to be able to deal with the
state of the UEFI firmware after SetVirtualAddressMap() has been called.
To avoid having separate code paths for non-kexec and kexec, let's move
the call to SetVirtualAddressMap() to the stub: this will guarantee us
that it will only be called once (since the stub is not executed during
kexec), and ensures that the UEFI state is identical between kexec and
normal boot.

This implies that the layout of the virtual mapping needs to be created
by the stub as well. All regions are rounded up to a naturally aligned
multiple of 64 KB (for compatibility with 64k pages kernels) and recorded
in the UEFI memory map. The kernel proper reads those values and installs
the mappings in a dedicated set of page tables that are swapped in during
UEFI Runtime Services calls.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Set EFI_ALLOC_ALIGN to 64 KB so that all allocations done by the stub
are naturally compatible with a 64 KB granule kernel.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

On systems with 64 KB pages, it is preferable for UEFI memory map
entries to be 64 KB aligned multiples of 64 KB, because it relieves
us of having to deal with the residues.
So, if EFI_ALLOC_ALIGN is #define'd by the platform, use it to round
up all memory allocations made.
Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Split of the remapping code from efi_config_init() so that the caller
can perform its own remapping. This is necessary to correctly handle
virtually remapped UEFI memory regions under kexec, as efi.systab will
have been updated to a virtual address.
Acked-by: Matt Fleming <matt.fleming@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

For UEFI, we need to install the memory mappings used for Runtime Services
in a dedicated set of page tables. Add create_pgd_mapping(), which allows
us to allocate and install those page table entries early.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Currently, swapper_pg_dir and idmap_pg_dir share the init_mm mm_struct
instance. To allow the introduction of other pg_dir instances, for instance,
for UEFI's mapping of Runtime Services, make the struct_mm instance an
explicit argument that gets passed down to the pmd and pte instantiation
functions. Note that the consumers (pmd_populate/pgd_populate) of the
mm_struct argument don't actually inspect it, but let's fix it for
correctness' sake.
Acked-by: Steve Capper <steve.capper@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Pull ARM fixes from Russell King:
 "Three small fixes from over the Christmas period, and wiring up the
  new execveat syscall for ARM"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error
  ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region
  ARM: 8249/1: mm: dump: don't skip regions
  ARM: wire up execveat syscall

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix
  with certain odd memory mappings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso: Use asm volatile in __getcpu
  x86/build: Clean auto-generated processor feature files
  x86: Fix mkcapflags.sh bash-ism
  x86: Fix step size adjustment during initial memory mapping
  x86_64, vdso: Fix the vdso address randomization algorithm

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: group scheduling corner case fix, two deadline scheduler
  fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs
  system fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group()
  sched/deadline: Avoid double-accounting in case of missed deadlines
  sched/deadline: Fix migration of SCHED_DEADLINE tasks
  sched: Fix odd values in effective_load() calculations
  sched, fanotify: Deal with nested sleeps
  sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also some kernel side fixes: uncore PMU
  driver fix, user regs sampling fix and an instruction decoder fix that
  unbreaks PEBS precise sampling"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
  perf/x86_64: Improve user regs sampling
  perf: Move task_pt_regs sampling into arch code
  x86: Fix off-by-one in instruction decoder
  perf hists browser: Fix segfault when showing callchain
  perf callchain: Free callchains when hist entries are deleted
  perf hists: Fix children sort key behavior
  perf diff: Fix to sort by baseline field by default
  perf list: Fix --raw-dump option
  perf probe: Fix crash in dwarf_getcfi_elf
  perf probe: Fix to fall back to find probe point in symbols
  perf callchain: Append callchains only when requested
  perf ui/tui: Print backtrace symbols when segfault occurs
  perf report: Show progress bar for output resorting

Pull locking fixes from Ingo Molnar:
 "A liblockdep fix and a mutex_unlock() mutex-debugging fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Always clear owner field upon mutex_unlock()
  tools/liblockdep: Fix debug_check thinko in mutex destroy

Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel
BUG at mm/rmap.c:399!") caused by commit 7a3ef208 ("mm: prevent
endless growth of anon_vma hierarchy")

Anon_vma_clone() is usually called for a copy of source vma in
destination argument.  If source vma has anon_vma it should be already
in dst->anon_vma.  NULL in dst->anon_vma is used as a sign that it's
called from anon_vma_fork().  In this case anon_vma_clone() finds
anon_vma for reusing.

Vma_adjust() calls it differently and this breaks anon_vma reusing
logic: anon_vma_clone() links vma to old anon_vma and updates degree
counters but vma_adjust() overrides vma->anon_vma right after that.  As
a result final unlink_anon_vmas() decrements degree for wrong anon_vma.

This patch assigns ->anon_vma before calling anon_vma_clone().
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com>
Reported-and-tested-by: Oded Gabbay <oded.gabbay@amd.com>
Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org  # to match back-porting of 7a3ef208Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit fee7e49d ("mm: propagate error from stack expansion even for
guard page") made sure that we return the error properly for stack
growth conditions.  It also theorized that counting the guard page
towards the stack limit might break something, but also said "Let's see
if anybody notices".

Somebody did notice.  Apparently android-x86 sets the stack limit very
close to the limit indeed, and including the guard page in the rlimit
check causes the android 'zygote' process problems.

So this adds the (fairly trivial) code to make the stack rlimit check be
against the actual real stack size, rather than the size of the vma that
includes the guard page.
Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: Jay Foad <jay.foad@gmail.com>
Cc: stable@kernel.org  # to match back-porting of fee7e49dSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull VFIO fix from Alex Williamson:
 "Fix PCI header check in vfio_pci_probe() (Wei Yang)"

* tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Fix the check on pci device type in vfio_pci_probe()

Pull SCSI fix from James Bottomley:
 "Just one fix: a qlogic busy wait regression"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  qla2xxx: fix busy wait regression