- 05 May, 2015 8 commits
-
-
Masami Hiramatsu authored
This allows the user to pass the filter pattern directly to the --funcs option as below: ---- # ./perf probe -F *kmalloc __kmalloc devm_kmalloc mempool_kmalloc sg_kmalloc sock_kmalloc ---- We previously needed to use the --filter option for that. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150505022950.23399.22435.stgit@localhost.localdomainSigned-off-by:
-
Masami Hiramatsu authored
This makes perf-probe --del option to accept filter rules not only simple glob pattern. This simplifies the code and improve the flexibility. E.g. if we remove 2 different pattern events, we need 2 -d options. ---- # ./perf probe -d vfs\* -d malloc Removed event: probe_libc:malloc Removed event: probe:vfs_read ---- This allows you to joint the 2 patterns with '|'. ---- # ./perf probe -d 'vfs*|malloc' Removed event: probe:vfs_read Removed event: probe_libc:malloc ---- Signed-off-by: -
Adrian Hunter authored
Add a new option and support for Instruction Tracing Snapshot Mode. When the new option is selected, no AUX area tracing data is captured until a signal (SIGUSR2) is received. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1430404667-10593-10-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
Add support for making snapshots of AUX area tracing data. Signed-off-by:
-
Adrian Hunter authored
Add support for the PERF_RECORD_ITRACE_START event type. This event can be used to determine the pid and tid that are running when Instruction Tracing starts. Generally that information would come from a sched_switch event but, at the start, no sched_switch events may yet have been recorded. Signed-off-by:
-
Adrian Hunter authored
Add support for the PERF_RECORD_AUX event type. PERF_RECORD_AUX is a new kernel event that records when new data lands in the AUX buffer. Currently it is assumed that AUX data follows the same ring buffer conventions used by the perf events buffer, and consequently the AUX event is not processed during recording. It is processed during session processing so that the information in the 'flags' member is made available. The format of PERF_RECORD_AUX is outlined in the linux/perf_events.h header file. The 'flags' are also enumerated. Intel PT and Intel BTS use the flag named PERF_AUX_FLAG_TRUNCATED to determine if data has been lost because the buffer became full as perf was not able to empty it fast enough. Signed-off-by:
-
Adrian Hunter authored
Add AUX area tracing option 'x' to synthesize events for transactions. This will be used by Intel PT to synthesize an event record for each TSX start, commit or abort. Signed-off-by:
-
Adrian Hunter authored
Add build option NO_AUXTRACE to exclude compiling support for AUX area tracing. Support for both recording and processing is excluded and by implication any future additions such as Intel PT and Intel BTS will also not be compiled in with this option. Signed-off-by:
-
- 04 May, 2015 26 commits
-
-
Adrian Hunter authored
We need to include all buildids when a perf.data file contains AUX area tracing data because we do not decode the trace for that purpose because it would take too long. Signed-off-by:
-
Adrian Hunter authored
Add an index of AUX area tracing events within a perf.data file. perf record uses a special user event PERF_RECORD_FINISHED_ROUND to enable sorting of events in chunks instead of having to sort all events altogether. AUX area tracing events contain data that can span back to the very beginning of the recording period. i.e. they do not obey the rules of PERF_RECORD_FINISHED_ROUND. By adding an index, AUX area tracing events can be found in advance and the PERF_RECORD_FINISHED_ROUND approach works as usual. The index is recorded with the auxtrace feature in the perf.data file. A session reads the index but does not process it. An AUX area decoder can queue all the AUX area data in advance using auxtrace_queues__process_index() or otherwise process the index in some custom manner. Signed-off-by:
-
Adrian Hunter authored
Unwittingly the itrace options for perf report ended up below the Overhead Calculation section. Move it back with the other options. Signed-off-by:
-
Namhyung Kim authored
Currently perf kmem command will select --slab if neither --slab nor --page is given for backward compatibility. Add kmem.default config option to select the default value ('page' or 'slab'). # cat ~/.perfconfig [kmem] default = page # perf kmem stat SUMMARY (page allocator) ======================== Total allocation requests : 1,518 [ 6,096 KB ] Total free requests : 1,431 [ 5,748 KB ] Total alloc+freed requests : 1,330 [ 5,344 KB ] Total alloc-only requests : 188 [ 752 KB ] Total free-only requests : 101 [ 404 KB ] Total allocation failures : 0 [ 0 KB ] ... Signed-off-by:Namhyung Kim <namhyung@kernel.org> Acked-by:
Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1429592107-1807-6-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
Save libtraceevent output and print it in the header. # perf kmem stat --page --caller # # GFP flags # --------- # 00000010: NI: GFP_NOIO # 000000d0: K: GFP_KERNEL # 00000200: NWR: GFP_NOWARN # 000084d0: K|R|Z: GFP_KERNEL|GFP_REPEAT|GFP_ZERO # 000200d2: HU: GFP_HIGHUSER # 000200da: HUM: GFP_HIGHUSER_MOVABLE # 000280da: HUM|Z: GFP_HIGHUSER_MOVABLE|GFP_ZERO # 002084d0: K|R|Z|NT: GFP_KERNEL|GFP_REPEAT|GFP_ZERO|GFP_NOTRACK # 0102005a: NF|HW|M: GFP_NOFS|GFP_HARDWALL|GFP_MOVABLE --------------------------------------------------------------------------------------------------------- Total alloc (KB) | Hits | Order | Mig.type | GFP flags | Callsite --------------------------------------------------------------------------------------------------------- 60 | 15 | 0 | UNMOVABL | K|R|Z|NT | pte_alloc_one 40 | 10 | 0 | MOVABLE | HUM|Z | handle_mm_fault 24 | 6 | 0 | MOVABLE | HUM | do_wp_page 24 | 6 | 0 | UNMOVABL | K | __pollwait ... Requested-by:Joonsoo Kim <js1304@gmail.com> Suggested-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Namhyung Kim authored
Currently 'perf kmem stat --page' shows total (page) allocation stat by default, but sometimes one might want to see live (total alloc-only) requests/pages only. The new --live option does this by subtracting freed allocation from the stat. E.g.: # perf kmem stat --page SUMMARY (page allocator) ======================== Total allocation requests : 988,858 [ 4,045,368 KB ] Total free requests : 886,484 [ 3,624,996 KB ] Total alloc+freed requests : 885,969 [ 3,622,628 KB ] Total alloc-only requests : 102,889 [ 422,740 KB ] Total free-only requests : 515 [ 2,368 KB ] Total allocation failures : 0 [ 0 KB ] Order Unmovable Reclaimable Movable Reserved CMA/Isolated ----- ------------ ------------ ------------ ------------ ------------ 0 172,173 3,083 806,686 . . 1 284 . . . . 2 6,124 58 . . . 3 114 335 . . . 4 . . . . . 5 . . . . . 6 . . . . . 7 . . . . . 8 . . . . . 9 . . 1 . . 10 . . . . . # perf kmem stat --page --live SUMMARY (page allocator) ======================== Total allocation requests : 988,858 [ 4,045,368 KB ] Total free requests : 886,484 [ 3,624,996 KB ] Total alloc+freed requests : 885,969 [ 3,622,628 KB ] Total alloc-only requests : 102,889 [ 422,740 KB ] Total free-only requests : 515 [ 2,368 KB ] Total allocation failures : 0 [ 0 KB ] Order Unmovable Reclaimable Movable Reserved CMA/Isolated ----- ------------ ------------ ------------ ------------ ------------ 0 2,214 3,025 97,156 . . 1 59 . . . . 2 19 58 . . . 3 23 335 . . . 4 . . . . . 5 . . . . . 6 . . . . . 7 . . . . . 8 . . . . . 9 . . . . . 10 . . . . . # Signed-off-by: -
Namhyung Kim authored
Add new sort keys for page: page, order, migtype, gfp - existing 'bytes', 'hit' and 'callsite' sort keys also work for page. Note that -s/--sort option should be preceded by either of --slab or --page option to determine where the sort keys applies. Now it properly groups and sorts allocation stats - so same page/caller with different order/migtype/gfp will be printed on a different line. # perf kmem stat --page --caller -l 10 -s order,hit ----------------------------------------------------------------------------- Total alloc (KB) | Hits | Order | Mig.type | GFP flags | Callsite ----------------------------------------------------------------------------- 64 | 4 | 2 | RECLAIM | 00285250 | new_slab 50,144 | 12,536 | 0 | MOVABLE | 0102005a | __page_cache_alloc 52 | 13 | 0 | UNMOVABL | 002084d0 | pte_alloc_one 40 | 10 | 0 | MOVABLE | 000280da | handle_mm_fault 28 | 7 | 0 | UNMOVABL | 000000d0 | __pollwait 20 | 5 | 0 | MOVABLE | 000200da | do_wp_page 20 | 5 | 0 | MOVABLE | 000200da | do_cow_fault 16 | 4 | 0 | UNMOVABL | 00000200 | __tlb_remove_page 16 | 4 | 0 | UNMOVABL | 000084d0 | __pmd_alloc 8 | 2 | 0 | UNMOVABL | 000084d0 | __pud_alloc ... | ... | ... | ... | ... | ... ----------------------------------------------------------------------------- Signed-off-by: -
Namhyung Kim authored
It is 'perf kmem' support caller statistics for page. Unlike slab case, the tracepoints in page allocator don't provide callsite info. So it records with callchain and extracts callsite info. Note that the callchain contains several memory allocation functions which has no meaning for users. So skip those functions to get proper callsites. I used following regex pattern to skip the allocator functions: ^_?_?(alloc|get_free|get_zeroed)_pages? This gave me a following list of functions: # perf kmem record --page sleep 3 # perf kmem stat --page -v ... alloc func: __get_free_pages alloc func: get_zeroed_page alloc func: alloc_pages_exact alloc func: __alloc_pages_direct_compact alloc func: __alloc_pages_nodemask alloc func: alloc_page_interleave alloc func: alloc_pages_current alloc func: alloc_pages_vma alloc func: alloc_page_buffers alloc func: alloc_pages_exact_nid ... The output looks mostly same as --alloc (I also added callsite column to that) but groups entries by callsite. Currently, the order, migrate type and GFP flag info is for the last allocation and not guaranteed to be same for all allocations from the callsite. --------------------------------------------------------------------------------------------- Total_alloc (KB) | Hits | Order | Mig.type | GFP flags | Callsite --------------------------------------------------------------------------------------------- 1,064 | 266 | 0 | UNMOVABL | 000000d0 | __pollwait 52 | 13 | 0 | UNMOVABL | 002084d0 | pte_alloc_one 44 | 11 | 0 | MOVABLE | 000280da | handle_mm_fault 20 | 5 | 0 | MOVABLE | 000200da | do_cow_fault 20 | 5 | 0 | MOVABLE | 000200da | do_wp_page 16 | 4 | 0 | UNMOVABL | 000084d0 | __pmd_alloc 16 | 4 | 0 | UNMOVABL | 00000200 | __tlb_remove_page 12 | 3 | 0 | UNMOVABL | 000084d0 | __pud_alloc 8 | 2 | 0 | UNMOVABL | 00000010 | bio_copy_user_iov 4 | 1 | 0 | UNMOVABL | 000200d2 | pipe_write 4 | 1 | 0 | MOVABLE | 000280da | do_wp_page 4 | 1 | 0 | UNMOVABL | 002084d0 | pgd_alloc --------------------------------------------------------------------------------------------- Signed-off-by: -
Masami Hiramatsu authored
Currently, perf-probe --list option ignores given event filter. ---- # ./perf probe -l vfs\* probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c) probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so) ---- This changes --list option to accept the event filter argument as below. ---- # ./perf probe -l vfs\* probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c) # ./perf probe -l \*libc:\* probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17.so) ---- Signed-off-by: -
Masami Hiramatsu authored
Accept multiple filter options. Each filters are combined by logical-or. E.g. --filter abc* --filter *def is same as --filter abc*|*def Signed-off-by:
-
Masami Hiramatsu authored
Add strfilter__string to recover rules string from strfilter. This will be good for debugging. Signed-off-by:
-
Masami Hiramatsu authored
Add strfilter__or/and to append additional rules to existing strfilter. Signed-off-by:
-
Naveen N. Rao authored
Currently, perf probe considers patterns including a '.' to be a file. However, this causes problems on powerpc ABIv1 where all functions have a leading '.': $ perf probe -F | grep schedule_timeout_interruptible .schedule_timeout_interruptible $ perf probe .schedule_timeout_interruptible Semantic error :File always requires line number or lazy pattern. Error: Command Parse Error. Fix this: - by checking the probe pattern in more detail, and - skipping leading dot if one exists when creating/deleting events. Signed-off-by:Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
-
Namhyung Kim authored
The YYLTYPE_IS_TRIVIAL is defined in the Build file, but unlike pmu-bison.c, gcc complained about it for parse-events-bison.c: CC util/parse-events-bison.o In file included from util/parse-events.y:16: util/parse-events-bison.h:101:1: error: "YYLTYPE_IS_TRIVIAL" redefined <command-line>: error: this is the location of the previous definition make[3]: *** [util/parse-events-bison.o] Error 1 Comments from Jiri Olsa: "Reason is the parse error handling that was added just recently: it adds YYLTYPE type (which is not present in pmu-bison.h), so YYLTYPE_IS_TRIVIAL gets redefined, which is ok in F20 that handle the error via '-w' option, but it's not ok for RHEL6 where the '-w' does not work for this kind of error." Signed-off-by:Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1430322871-18107-1-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Naveen N. Rao authored
Add a debug message to indicate that the build id didn't match. Signed-off-by:
-
Adrian Hunter authored
Add support for decoding an AUX area assuming it contains instruction tracing data. Signed-off-by:
-
Adrian Hunter authored
If a file contains AUX area tracing data then always allow fields 'addr' and 'cpu' to be selected as options for perf script. This is necessary because AUX area decoding may synthesize events with that information. Signed-off-by:
-
Adrian Hunter authored
Reference counting of the mmap buffer does not work correctly when there is an AUX area mmap also. In snapshot mode it is not easy to know if the AUX area mmap buffer contains usefull information. Equally the evlist does not know if the recording is in sanpshot mode anyway. Consequently, for now just assume the AUX area mmap always has data, which will just cause the mmap buffer to remain mmapped for the duration of the recording. Signed-off-by:
-
Naveen N. Rao authored
On powerpc ABIv2, if no debug-info is found and we use kallsyms, we need to fixup the function entry to point to the local entry point. Use offset of 8 since current toolchains always generate 2 instructions (8 bytes). Signed-off-by:
-
Naveen N. Rao authored
Use symbol table lookups by default if DWARF is not necessary, since powerpc ABIv2 encodes local entry points in the symbol table and the function entry address in DWARF may not be appropriate for kprobes, as described here: https://sourceware.org/bugzilla/show_bug.cgi?id=17638 "The DWARF address ranges deliberately include the *whole* function, both global and local entry points." ... "If you want to set probes on a local entry point, you should look up the symbol in the main symbol table (not DWARF), and check the st_other bits; they will indicate whether the function has a local entry point, and what its offset from the global entry point is. Note that GDB does the same when setting a breakpoint on a function entry." Signed-off-by:
-
Ananth N Mavinakayanahalli authored
ppc64 ELF ABIv2 has a Global Entry Point (GEP) and a Local Entry Point (LEP). For purposes of probing, we need the LEP - the offset to which is encoded in st_other. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Reviewed-by:
-
Naveen N. Rao authored
Allow perf probe to work on ppc ABIv1 without the need to specify the leading dot '.' for functions. 'perf probe do_fork' works with this patch. We do this by changing how symbol name comparison works on ppc ABIv1 - we simply ignore and skip over the initial dot, if one exists, during symbol name comparison. Signed-off-by:
-
Naveen N. Rao authored
Use the proper prefix when ignoring SyS symbols on ppc ABIv1. While at it, generalize symbol selection so architectures can implement their own logic. Signed-off-by:
-
Naveen N. Rao authored
If using the symbol table, symbol addresses are not being fixed up properly, resulting in probes being placed at wrong addresses: # perf probe do_fork Added new event: probe:do_fork (on do_fork) You can now use it in all perf tools, such as: perf record -e probe:do_fork -aR sleep 1 # cat /sys/kernel/debug/tracing/kprobe_events p:probe/do_fork _text+635952 # printf "%x" 635952 9b430 # grep do_fork /boot/System.map c0000000000ab430 T .do_fork Fix by checking for ELF type ET_DYN used by ppc64 kernels. Signed-off-by: -
Petr Holasek authored
In verbose mode perf bench numa shows also GB/s speed, system and user cpu time for each particular thread. Using of getrusage() can provide much more per process or per thread stats in future. Signed-off-by:
Petr Holasek <pholasek@redhat.com> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1429198699-25039-3-git-send-email-pholasek@redhat.com [ Rename 'usage' variable to not shadow util.h's usage() ] Signed-off-by:
-
Will Deacon authored
Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent change to get it working for Sparc broke arm and arm64 platforms. Use sysconf to determine the number of online CPUs only parsing /proc/cpuinfo when sysconf is not available. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
- 29 Apr, 2015 6 commits
-
-
Namhyung Kim authored
As the --children option changes the output of perf report (and perf top) it sometimes confuses users. Add more words and examples to help understanding of the option's behavior - and how to disable it ;-). Signed-off-by:
-
Jiri Olsa authored
Separating metrics values for exclude_idle bit. Signed-off-by:
-
Jiri Olsa authored
Separating metrics values for guest and host, so we get proper values. Signed-off-by:
-
Jiri Olsa authored
Separating metrics values for exclude_hv bit. Signed-off-by:
-
Jiri Olsa authored
Changing metrics context calculation to allow more than 2 types of context. Following patches will add support for the rest of the exclude_* bits so we need separate array element for all context combinations. Signed-off-by:
-
Andi Kleen authored
Currently in perf IPC and other metrics cannot be directly shown separately for both user and kernel in a single run. The problem was that the metrics matching code did not check event qualifiers. With this patch the following case works correctly. % perf stat -e cycles:k,cycles:u,instructions:k,instructions:u true Performance counter stats for 'true': 531,718 cycles:k 203,895 cycles:u 338,151 instructions:k # 0.64 insns per cycle 105,961 instructions:u # 0.52 insns per cycle 0.002989739 seconds time elapsed Previously it would misreport the ratios because they were matching the wrong value. The patch is fairly big, but quite mechanic as it just adds context indexes everywhere. Reported-by:William Cohen <wcohen@redhat.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
