According to the documentation the CPU must wait for CONTROL_INIT to
be cleared before writing to the baudrate registers.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch adds return value checking to all direct and indirect users of
c_can_set_bittiming().
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch adds the missing netif_napi_del() to the free_c_can_dev() function.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch fixes the name of the parameter to configure the sample point used
in iproute2's ip command. The correct writing is "sample-point" not
"sample_point".
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fixed a memory leak when an error occurred in the transmit function. In the
error handling the urb wasn't freed before returning. There was also a call to
the usb_unanchor_urb() function but the urb wasn't anchored.
Signed-off-by: Bjorn Van Tilt <bjorn.vantilt@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

While transmit over a at86rf231 device and unloading the module I got:

[   29.643073] WARNING: CPU: 0 PID: 3 at kernel/workqueue.c:1335 __queue_work+0xb4/0x224()
[   29.651457] Modules linked in: at86rf230(-) autofs4
[   29.656612] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G        W    3.14.0-rc6-01602-g902659e-dirty #294
[   29.666490] [<c00124f0>] (unwind_backtrace) from [<c0010ad0>] (show_stack+0x10/0x14)
[   29.674628] [<c0010ad0>] (show_stack) from [<c0032c80>] (warn_slowpath_common+0x60/0x80)
[   29.683116] [<c0032c80>] (warn_slowpath_common) from [<c0032d30>] (warn_slowpath_null+0x18/0x20)
[   29.692329] [<c0032d30>] (warn_slowpath_null) from [<c0045b08>] (__queue_work+0xb4/0x224)
[   29.700906] [<c0045b08>] (__queue_work) from [<c0045cc8>] (queue_work_on+0x50/0x78)
[   29.708944] [<c0045cc8>] (queue_work_on) from [<c05669cc>] (mac802154_tx+0x1e4/0x240)
[   29.717164] [<c05669cc>] (mac802154_tx) from [<c0471814>] (dev_hard_start_xmit+0x2f0/0x43c)
[   29.725926] [<c0471814>] (dev_hard_start_xmit) from [<c04878d0>] (sch_direct_xmit+0x64/0x2a0)
[   29.734867] [<c04878d0>] (sch_direct_xmit) from [<c0487c38>] (__qdisc_run+0x12c/0x18c)
[   29.743169] [<c0487c38>] (__qdisc_run) from [<c046e1b0>] (net_tx_action+0xe0/0x178)
[   29.751205] [<c046e1b0>] (net_tx_action) from [<c0036690>] (__do_softirq+0x100/0x264)
[   29.759420] [<c0036690>] (__do_softirq) from [<c0036818>] (run_ksoftirqd+0x24/0x4c)
[   29.767453] [<c0036818>] (run_ksoftirqd) from [<c005232c>] (smpboot_thread_fn+0x128/0x13c)
[   29.776121] [<c005232c>] (smpboot_thread_fn) from [<c004c3fc>] (kthread+0xd0/0xe4)
[   29.784061] [<c004c3fc>] (kthread) from [<c000da88>] (ret_from_fork+0x14/0x2c)
[   29.791628] ---[ end trace 3406ff24bd973834 ]---

The problem is there are still interrupts after deregister ieee802154
device. This patch mask all interrupts in the at86rf2xx chips before
deregister the device.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paul Durrant says:

====================
xen-netback: fix rx slot estimation

Sander Eikelenboom reported an issue with ring overflow in netback in
3.14-rc3. This turns outo be be because of a bug in the ring slot estimation
code. This patch series fixes the slot estimation, fixes the BUG_ON() that
was supposed to catch the issue that Sander ran into and also makes a small
fix to start_new_rx_buffer().

v3:
 - Added a cap of MAX_SKB_FRAGS to estimate in patch #2

v2:
 - Added BUG_ON() to patch #1
 - Added more explanation to patch #3
====================
Reported-By: Sander Eikelenboom <linux@eikelenboom.it>
Tested-By: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The BUG_ON to catch ring overflow in xenvif_rx_action() makes the assumption
that meta_slots_used == ring slots used. This is not necessarily the case
for GSO packets, because the non-prefix GSO protocol consumes one more ring
slot than meta-slot for the 'extra_info'. This patch changes the test to
actually check ring slots.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

The worse-case estimate for skb ring slot usage in xenvif_rx_action()
fails to take fragment page_offset into account. The page_offset does,
however, affect the number of times the fragmentation code calls
start_new_rx_buffer() (i.e. consume another slot) and the worse-case
should assume that will always return true. This patch adds the page_offset
into the DIV_ROUND_UP for each frag.

Unfortunately some frontends aggressively limit the number of requests
they post into the shared ring so to avoid an estimate that is 'too'
pessimal it is capped at MAX_SKB_FRAGS.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes a test in start_new_rx_buffer() that checks whether
a copy operation is less than MAX_BUFFER_OFFSET in length, since
MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of
start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Reported-By: Sander Eikelenboom <linux@eikelenboom.it>
Tested-By: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) We've discovered a common error in several networking drivers, they
    put VLAN offload features into ->vlan_features, which would suggest
    that they support offloading 2 or more levels of VLAN encapsulation.
    Not only do these devices not do that, but we don't have the
    infrastructure yet to handle that at all.

    Fixes from Vlad Yasevich.

 2) Fix tcpdump crash with bridging and vlans, also from Vlad.

 3) Some MAINTAINERS updates for random32 and bonding.

 4) Fix late reseeds of prandom generator, from Sasha Levin.

 5) Bridge doesn't handle stacked vlans properly, fix from Toshiaki
    Makita.

 6) Fix deadlock in openvswitch, from Flavio Leitner.

 7) get_timewait4_sock() doesn't report delay times correctly, fix from
    Eric Dumazet.

 8) Duplicate address detection and addrconf verification need to run in
    contexts where RTNL can be obtained.  Move them to run from a
    workqueue.  From Hannes Frederic Sowa.

 9) Fix route refcount leaking in ip tunnels, from Pravin B Shelar.

10) Don't return -EINTR from non-blocking recvmsg() on AF_UNIX sockets,
    from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
  vlan: Warn the user if lowerdev has bad vlan features.
  veth: Turn off vlan rx acceleration in vlan_features
  ifb: Remove vlan acceleration from vlan_features
  qlge: Do not propaged vlan tag offloads to vlans
  bridge: Fix crash with vlan filtering and tcpdump
  net: Account for all vlan headers in skb_mac_gso_segment
  MAINTAINERS: bonding: change email address
  MAINTAINERS: bonding: change email address
  ipv6: move DAD and addrconf_verify processing to workqueue
  tcp: fix get_timewait4_sock() delay computation on 64bit
  openvswitch: fix a possible deadlock and lockdep warning
  bridge: Fix handling stacked vlan tags
  bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled
  vhost: validate vhost_get_vq_desc return value
  vhost: fix total length when packets are too short
  random32: avoid attempt to late reseed if in the middle of seeding
  random32: assign to network folks in MAINTAINERS
  net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset
  core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
  vlan: Set hard_header_len according to available acceleration
  ...

Vlad Yasevich says:

====================
Audit all drivers for correct vlan_features.

Some drivers set vlan acceleration features in vlan_features.  This causes
issues with Q-in-Q/802.1ad configurations.

Audit all the drivers for correct vlan_features.  Fix broken ones.
Add a warning to vlan code to help catch future offenders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers incorrectly assign vlan acceleration features to
vlan_features thus causing issues for Q-in-Q vlan configurations.
Warn the user of such cases.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For completeness, turn off vlan rx acceleration in vlan_features so
that it doesn't show up on q-in-q setups.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not include vlan acceleration features in vlan_features as that
precludes correct Q-in-Q operation.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge driver turns off NETIF_F_HW_CTAG_FILTER, but forgets to
turn off HW_CTAG_TX and HW_CTAG_RX on vlan devices.  With the
current settings, q-in-q will only generate a single vlan header.
Remember to mask off CTAG_TX and CTAG_RX features in vlan_features.

CC: Shahed Shaikh <shahed.shaikh@qlogic.com>
CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
CC: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the vlan filtering is enabled on the bridge, but
the filter is not configured on the bridge device itself,
running tcpdump on the bridge device will result in a
an Oops with NULL pointer dereference.  The reason
is that br_pass_frame_up() will bypass the vlan
check because promisc flag is set.  It will then try
to get the table pointer and process the packet based
on the table.  Since the table pointer is NULL, we oops.
Catch this special condition in br_handle_vlan().
Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_network_protocol() already accounts for multiple vlan
headers that may be present in the skb.  However, skb_mac_gso_segment()
doesn't know anything about it and assumes that skb->mac_len
is set correctly to skip all mac headers.  That may not
always be the case.  If we are simply forwarding the packet (via
bridge or macvtap), all vlan headers may not be accounted for.

A simple solution is to allow skb_network_protocol to return
the vlan depth it has calculated.  This way skb_mac_gso_segment
will correctly skip all mac headers.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update my email address.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge two fixes from Andrew Morton:
 "The x86 fix should come from x86 guys but they appear to be
  conferencing or otherwise distracted.

  The ocfs2 fix is a bit of a mess - the code runs into an immediate
  NULL deref and we're trying to work out how this got through test and
  review, but we haven't heard from Goldwyn in the past few days.
  Sasha's patch fixes the oops, but the feature as a whole is probably
  broken.  So this is a stopgap for 3.14 - I'll aim to get the real
  fixes into 3.14.x"

* emailed patches from Andrew Morton akpm@linux-foundation.org>:
  x86: fix boot on uniprocessor systems
  ocfs2: check if cluster name exists before deref

On x86 uniprocessor systems topology_physical_package_id() returns -1
which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized
which leads to GPF in rapl_pmu_init().

See arch/x86/kernel/cpu/perf_event_intel_rapl.c.

It turns out that physical_package_id and core_id can actually be
retreived for uniprocessor systems too.  Enabling them also fixes
rapl_pmu code.
Signed-off-by: Artem Fetishev <artem_fetishev@epam.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c74a3bdd ("ocfs2: add clustername to cluster connection") is
trying to strlcpy a string which was explicitly passed as NULL in the
very same patch, triggering a NULL ptr deref.

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: strlcpy (lib/string.c:388 lib/string.c:151)
  CPU: 19 PID: 19426 Comm: trinity-c19 Tainted: G        W     3.14.0-rc7-next-20140325-sasha-00014-g9476368-dirty #274
  RIP:  strlcpy (lib/string.c:388 lib/string.c:151)
  Call Trace:
   ocfs2_cluster_connect (fs/ocfs2/stackglue.c:350)
   ocfs2_cluster_connect_agnostic (fs/ocfs2/stackglue.c:396)
   user_dlm_register (fs/ocfs2/dlmfs/userdlm.c:679)
   dlmfs_mkdir (fs/ocfs2/dlmfs/dlmfs.c:503)
   vfs_mkdir (fs/namei.c:3467)
   SyS_mkdirat (fs/namei.c:3488 fs/namei.c:3472)
   tracesys (arch/x86/kernel/entry_64.S:749)

akpm: this patch probably disables the feature.  A temporary thing to
avoid triviel oopses.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

addrconf_join_solict and addrconf_join_anycast may cause actions which
need rtnl locked, especially on first address creation.

A new DAD state is introduced which defers processing of the initial
DAD processing into a workqueue.

To get rtnl lock we need to push the code paths which depend on those
calls up to workqueues, specifically addrconf_verify and the DAD
processing.

(v2)
addrconf_dad_failure needs to be queued up to the workqueue, too. This
patch introduces a new DAD state and stop the DAD processing in the
workqueue (this is because of the possible ipv6_del_addr processing
which removes the solicited multicast address from the device).

addrconf_verify_lock is removed, too. After the transition it is not
needed any more.

As we are not processing in bottom half anymore we need to be a bit more
careful about disabling bottom half out when we lock spin_locks which are also
used in bh.

Relevant backtrace:
[  541.030090] RTNL: assertion failed at net/core/dev.c (4496)
[  541.031143] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O 3.10.33-1-amd64-vyatta #1
[  541.031145] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  541.031146]  ffffffff8148a9f0 000000000000002f ffffffff813c98c1 ffff88007c4451f8
[  541.031148]  0000000000000000 0000000000000000 ffffffff813d3540 ffff88007fc03d18
[  541.031150]  0000880000000006 ffff88007c445000 ffffffffa0194160 0000000000000000
[  541.031152] Call Trace:
[  541.031153]  <IRQ>  [<ffffffff8148a9f0>] ? dump_stack+0xd/0x17
[  541.031180]  [<ffffffff813c98c1>] ? __dev_set_promiscuity+0x101/0x180
[  541.031183]  [<ffffffff813d3540>] ? __hw_addr_create_ex+0x60/0xc0
[  541.031185]  [<ffffffff813cfe1a>] ? __dev_set_rx_mode+0xaa/0xc0
[  541.031189]  [<ffffffff813d3a81>] ? __dev_mc_add+0x61/0x90
[  541.031198]  [<ffffffffa01dcf9c>] ? igmp6_group_added+0xfc/0x1a0 [ipv6]
[  541.031208]  [<ffffffff8111237b>] ? kmem_cache_alloc+0xcb/0xd0
[  541.031212]  [<ffffffffa01ddcd7>] ? ipv6_dev_mc_inc+0x267/0x300 [ipv6]
[  541.031216]  [<ffffffffa01c2fae>] ? addrconf_join_solict+0x2e/0x40 [ipv6]
[  541.031219]  [<ffffffffa01ba2e9>] ? ipv6_dev_ac_inc+0x159/0x1f0 [ipv6]
[  541.031223]  [<ffffffffa01c0772>] ? addrconf_join_anycast+0x92/0xa0 [ipv6]
[  541.031226]  [<ffffffffa01c311e>] ? __ipv6_ifa_notify+0x11e/0x1e0 [ipv6]
[  541.031229]  [<ffffffffa01c3213>] ? ipv6_ifa_notify+0x33/0x50 [ipv6]
[  541.031233]  [<ffffffffa01c36c8>] ? addrconf_dad_completed+0x28/0x100 [ipv6]
[  541.031241]  [<ffffffff81075c1d>] ? task_cputime+0x2d/0x50
[  541.031244]  [<ffffffffa01c38d6>] ? addrconf_dad_timer+0x136/0x150 [ipv6]
[  541.031247]  [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6]
[  541.031255]  [<ffffffff8105313a>] ? call_timer_fn.isra.22+0x2a/0x90
[  541.031258]  [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6]

Hunks and backtrace stolen from a patch by Stephen Hemminger.
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It seems I missed one change in get_timewait4_sock() to compute
the remaining time before deletion of IPV4 timewait socket.

This could result in wrong output in /proc/net/tcp for tm->when field.

Fixes: 96f817fe ("tcp: shrink tcp6_timewait_sock by one cache line")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two problematic situations.

A deadlock can happen when is_percpu is false because it can get
interrupted while holding the spinlock. Then it executes
ovs_flow_stats_update() in softirq context which tries to get
the same lock.

The second sitation is that when is_percpu is true, the code
correctly disables BH but only for the local CPU, so the
following can happen when locking the remote CPU without
disabling BH:

       CPU#0                            CPU#1
  ovs_flow_stats_get()
   stats_read()
 +->spin_lock remote CPU#1        ovs_flow_stats_get()
 |  <interrupted>                  stats_read()
 |  ...                       +-->  spin_lock remote CPU#0
 |                            |     <interrupted>
 |  ovs_flow_stats_update()   |     ...
 |   spin_lock local CPU#0 <--+     ovs_flow_stats_update()
 +---------------------------------- spin_lock local CPU#1

This patch disables BH for both cases fixing the deadlocks.
Acked-by: Jesse Gross <jesse@nicira.com>

=================================
[ INFO: inconsistent lock state ]
3.14.0-rc8-00007-g632b06aa #1 Tainted: G          I
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes:
(&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40
[<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
[<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
[<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch]
[<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch]
[<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch]
[<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch]
[<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0
[<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0
[<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0
[<ffffffff816c0798>] genl_rcv+0x28/0x40
[<ffffffff816bf830>] netlink_unicast+0x100/0x1e0
[<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770
[<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0
[<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0
[<ffffffff8166a911>] __sys_sendmsg+0x51/0x90
[<ffffffff8166a962>] SyS_sendmsg+0x12/0x20
[<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b
irq event stamp: 1740726
hardirqs last  enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840
hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840
softirqs last  enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50
softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&cpu_stats->lock)->rlock);
  <Interrupt>
    lock(&(&cpu_stats->lock)->rlock);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0:  (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320
 #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0
 #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840
 #3:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0
 #4:  (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch]

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G          I  3.14.0-rc8-00007-g632b06aa #1
Hardware name:                  /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012
 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c
 ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005
 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0
Call Trace:
 <IRQ>  [<ffffffff817cfe3c>] dump_stack+0x4d/0x66
 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205
 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180
 [<ffffffff810f8963>] mark_lock+0x223/0x2b0
 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40
 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80
 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch]
 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch]
 [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40
 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch]
 [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch]
 [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch]
 [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0
 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0
 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0
 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840
 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20
 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840
 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220
 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220
 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0
 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0
 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50
 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0
 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320
 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0
 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a bridge with vlan_filtering enabled receives frames with stacked
vlan tags, i.e., they have two vlan tags, br_vlan_untag() strips not
only the outer tag but also the inner tag.

br_vlan_untag() is called only from br_handle_vlan(), and in this case,
it is enough to set skb->vlan_tci to 0 here, because vlan_tci has already
been set before calling br_handle_vlan().
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bridge vlan code (br_vlan_get_tag()) assumes that all frames have vlan_tci
if they are tagged, but if vlan tx offload is manually disabled on bridge
device and frames are sent from vlan device on the bridge device, the tags
are embedded in skb->data and they break this assumption.
Extract embedded vlan tags and move them to vlan_tci at ingress.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost fails to validate negative error code
from vhost_get_vq_desc causing
a crash: we are using -EFAULT which is 0xfffffff2
as vector size, which exceeds the allocated size.

The code in question was introduced in commit
8dd014ad
    vhost-net: mergeable buffers support

CVE-2014-0055
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mergeable buffers are disabled, and the
incoming packet is too large for the rx buffer,
get_rx_bufs returns success.

This was intentional in order for make recvmsg
truncate the packet and then handle_rx would
detect err != sock_len and drop it.

Unfortunately we pass the original sock_len to
recvmsg - which means we use parts of iov not fully
validated.

Fix this up by detecting this overrun and doing packet drop
immediately.

CVE-2014-0077
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4af712e8 ("random32: add prandom_reseed_late() and call when
nonblocking pool becomes initialized") has added a late reseed stage
that happens as soon as the nonblocking pool is marked as initialized.

This fails in the case that the nonblocking pool gets initialized
during __prandom_reseed()'s call to get_random_bytes(). In that case
we'd double back into __prandom_reseed() in an attempt to do a late
reseed - deadlocking on 'lock' early on in the boot process.

Instead, just avoid even waiting to do a reseed if a reseed is already
occuring.

Fixes: 4af712e8 ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull input subsystem fixes from Dmitry Torokhov:
 "Updates to Synaptics touchpad to better cope with devices in Lenovo
  laptops, and a couple more fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - add manual min/max quirk for ThinkPad X240
  Input: synaptics - add manual min/max quirk
  Input: cypress_ps2 - don't report as a button pads
  Input: da9052_onkey - use correct register bit for key status
  Input: adp5588-keys - get value from data out when dir is out

lib/random32.c was split out of the network code and is de-facto
still maintained by the almighty net/ gods.

Make it a bit more official so that people who aren't aware of
that know where to send their patches.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "I didn't want these to wait for stable cycle.

  The nouveau and radeon ones are the same problem, where the runtime pm
  stuff broke non-runtime pm managed secondary GPUs.

  The udl fix is for an oops on unplug, and the i915 fix is for a
  regression on Sandybridge even though it may break haswell (regression
  wins)"

Daniel Vetter comments:
 "My apologies for the i915 regression fumble, that thing somehow fell
  through the cracks here for almost half a year :( Imo that's more than
  enough flailing to just go ahead with the revert, and the re-broken
  hsw should get peoples attention ..."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Undo gtt scratch pte unmapping again
  drm/radeon: fix runtime suspend breaking secondary GPUs
  drm/nouveau: fail runtime pm properly.
  drm/udl: take reference to device struct for dma-bufs

Pull i2c build fix from Wolfram Sang:
 "The build fix from my last request unveiled another build problem
  which is fixed with this patch"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cpm: Fix build by adding of_address.h and of_irq.h

Pull Xen bugfixes from David Vrabel:
 "Fix two bugs that cause x86 PV guest crashes.

  1. Ballooning a 32-bit guest would eventually crash it.

  2. Revert a broken fix for a regression with NUMA_BALACING.  The bad
     fix caused PV guests to crash after migration.  This is not ideal
     but unpicking the madness that is _PAGE_NUMA == _PAGE_PROTNONE will
     take a while longer"

* tag 'stable/for-linus-3.14-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Revert "xen: properly account for _PAGE_NUMA during xen pte translations"
  xen/balloon: flush persistent kmaps in correct position

This extends Benjamin Tissoires manual min/max quirk table with support for
the ThinkPad X240.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad.
However, these new Synaptics devices report bad axis ranges.
Under Windows, it is not a problem because the Windows driver uses RMI4
over SMBus to talk to the device. Under Linux, we are using the PS/2
fallback interface and it occurs the reported ranges are wrong.

Of course, it would be too easy to have only one range for the whole
series, each touchpad seems to be calibrated in a different way.

We can not use SMBus to get the actual range because I suspect the firmware
will switch into the SMBus mode and stop talking through PS/2 (this is the
case for hybrid HID over I2C / PS/2 Synaptics touchpads).

So as a temporary solution (until RMI4 land into upstream), start a new
list of quirks with the min/max manually set.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It apparently blows up on some machines. This functionally reverts

commit 828c7908
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Wed Oct 16 09:21:30 2013 -0700

    drm/i915: Disable GGTT PTEs on GEN6+ suspend

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841Reported-and-Tested-by: Brad  Jackson <bjackson0971@gmail.com>
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Same fix as for nouveau, when we fail with EINVAL, subsequent
gets fail hard, causing the device not to open.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>