- 13 Apr, 2015 1 commit
-
-
Namhyung Kim authored
The struct page is opaque for userspace tools, so it'd be better to save pfn in order to identify page frames. The textual output of $debugfs/tracing/trace file remains unchanged and only raw (binary) data format is changed - but thanks to libtraceevent, userspace tools which deal with the raw data (like perf and trace-cmd) can parse the format easily. So impact on the userspace will also be minimal. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Based-on-patch-by:
Joonsoo Kim <js1304@gmail.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1428298576-9785-3-git-send-email-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 Apr, 2015 1 commit
-
-
Ingo Molnar authored
Dan Carpenter pointed out that the control flow in pt_pmu_hw_init() is a bit messy: for example the kfree(de_attrs) is entirely superfluous. Another problem is the inconsistent mixing of label based and direct return error handling. Add modern, label based error handling instead and clean up the code a bit as well. Note that we'll still do a kfree(NULL) in the normal case - this does not matter as this is an init path and kfree() returns early if it sees a NULL. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150409090805.GG17605@mwandaSigned-off-by:
-
- 11 Apr, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New user visible features: - Support multiple probes on different binaries on the same command line (Masami Hiramatsu) User visible changes: - Fix synthesizing fork_event.ppid for non-main thread (David Ahern) - Fix cross-endian analysis (David Ahern) - Fix segfault in 'perf buildid-list' when show DSOs with hits (He Kuang) Infrastructure changes: - Fix type for references to data_head/tail (David Ahern) - Fix error path to do closedir() when synthesizing threads (Arnaldo Carvalho de Melo) Signed-off-by:
-
- 10 Apr, 2015 7 commits
-
-
David Ahern authored
The data_head and data_tail fields are defined as __u64 in linux/perf_event.h, but perf userspace uses int and unsigned int. Convert all references to u64 for consistency. Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1428420037-26599-1-git-send-email-dsahern@gmail.comSigned-off-by:
-
Masami Hiramatsu authored
To avoid probing in unintended binary, the orphaned -x option must be checked and warned. Without this patch, following command sets up the probe in the kernel. ----- # perf probe -a strcpy -x ./perf Added new event: probe:strcpy (on strcpy) You can now use it in all perf tools, such as: perf record -e probe:strcpy -aR sleep 1 ----- But in this case, it seems that the user may want to probe in the perf binary. With this patch, perf-probe correctly handles the orphaned -x. ----- # perf probe -a strcpy -x ./perf Error: -x/-m must follow the probe definitions. ... ----- Reported-by:Jiri Olsa <jolsa@redhat.com> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
-
Masami Hiramatsu authored
Support multiple probes on different binaries with just one command. In the result, this example sets up the probes on icmp_rcv in kernel, on main and set_target in perf, and on pcspkr_event in pcspker.ko driver. ----- # perf probe -a icmp_rcv -x ./perf -a main -a set_target \ -m /lib/modules/4.0.0-rc5+/kernel/drivers/input/misc/pcspkr.ko \ -a pcspkr_event Added new event: probe:icmp_rcv (on icmp_rcv) You can now use it in all perf tools, such as: perf record -e probe:icmp_rcv -aR sleep 1 Added new event: probe_perf:main (on main in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:main -aR sleep 1 Added new event: probe_perf:set_target (on set_target in /home/mhiramat/ksrc/linux-3/tools/perf/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:set_target -aR sleep 1 Added new event: probe:pcspkr_event (on pcspkr_event in pcspkr) You can now use it in all perf tools, such as: perf record -e probe:pcspkr_event -aR sleep 1 ----- Reported-by:Arnaldo Carvalho de Melo <acme@infradead.org> Signed-off-by:
-
He Kuang authored
commit: f3b623b8 ("perf tools: Reference count struct thread") appends every thread->node to dead_threads in machine__remove_thread() and list_del_init() this node in thread__put(). perf_event__exit_del_thread() releases thread wihout using machine__remove_thread(), and causes a NULL pointer crash when list_del_init(&thread->node) is called. Fix this by using machine_remove_thread() instead of using thread__put() directly. This problem can be reproduced as following: $ perf record ls $ perf buildid-list --with-hits [ 3874.195070] perf[1018]: segfault at 0 ip 00000000004b0b15 sp 00007ffc35b44780 error 6 in perf[400000+166000] Segmentation fault After this patch: $ perf record ls $ perf buildid-list --with-hits bc23e7c3281e542650ba4324421d6acf78f4c23e /proc/kcore 643324cb0e969f30c56d660f167f84a150845511 [vdso] 0000000000000000000000000000000000000000 /bin/busybox ... Signed-off-by:
He Kuang <hekuang@huawei.com> Tested-by:
-
David Ahern authored
Trying to analyze a big endian data file on little endian system fails with the error: 0xa9b40 [0x70]: failed to process type: 9 The problem is that header parsing is not done correctly because the file attributes are not swapped. Make it so. With this patch able to analyze a sparc64 data file on x86_64. Signed-off-by:
David Ahern <david.ahern@oracle.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1428610546-178789-1-git-send-email-david.ahern@oracle.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
When traversing /proc to synthesize the PERF_RECORD_FORK et al events we were bailing out on errors without calling closedir(), fix it. Reported-by:
-
David Ahern authored
Commit ca6c41c5 sets the ppid based on what is read from the /proc/pid/status file when synthesizing fork events. This is correct thing to do for new processes but not threads of a process. Fix ppid for threads to be the main thread when synthesizing fork events (ie., assume main thread spawned all sub-threads in a process). Reported-by:
Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by:
Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1428598107-178999-1-git-send-email-david.ahern@oracle.comSigned-off-by:
-
- 08 Apr, 2015 20 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra) - Improve 'perf sched replay' on high CPU core count machines (Yunlong Song) - Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT events (Arnaldo Carvalho de Melo) - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa) - Respect -i option 'in perf kmem' (Jiri Olsa) Infrastructure changes: - Honor operator priority in libtraceevent (Namhyung Kim) - Merge all perf_event_attr print functions (Peter Zijlstra) - Check kmaps access to make code more robust (Wang Nan) - Fix inverted logic in perf_mmap__empty() (He Kuang) - Fix ARM 32 'perf probe' building error (Wang Nan) - Fix perf_event_attr tests (Jiri Olsa) Signed-off-by:
-
Jiri Olsa authored
Adding 'I' event modifier to have complete set of modifiers for perf_event_attr:exclude_* bits. Any event specified with 'I' modifier will have the perf_event_attr:exclude_idle bit set. $ perf record -e cycles:I -vv ls 2>&1 | grep exclude_idle exclude_hv 0 exclude_idle 1 Adding automated tests. Signed-off-by:
-
Wang Nan authored
report__warn_kptr_restrict() calls map__kmap(kernel_map) before checking kernel_map againest NULL. Which is dangerous, since map__kmap() will return a invalid and not NULL address. It will trigger a warning message in map__kmap() after the patch "perf: kmaps: enforce usage of kmaps to protect futher bugs." was applied. This patch fixes it by adding the missing checking. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1428490772-135393-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Jiri Olsa authored
Following commit: 1a594131 perf: Add wakeup watermark control to the AUX area enlarged perf_event_attr, but did not updated attr tests. Reported-by:
-
Wang Nan authored
Commit 9b118aca ("perf probe: Fix to handle aliased symbols in glibc") uses an absolute format '%lx' to print u64 argument, which causes compiling error on ARM 32. This patch replaces it with PRIx64. Signed-off-by:
-
Peter Zijlstra authored
Currently there's 3 (that I found) different and incomplete implementations of printing perf_event_attr. This is quite silly. Merge the lot. While this patch does not retain the exact form all printing that I found is debug output and thus it should not be critical. Also, I cannot find a single print_event_desc() caller. Pre: $ perf record -vv -e cycles -- sleep 1 ------------------------------------------------------------ perf_event_attr: type 0 size 104 config 0 sample_period 4000 sample_freq 4000 sample_type 0x107 read_format 0 disabled 1 inherit 1 pinned 0 exclusive 0 exclude_user 0 exclude_kernel 0 exclude_hv 0 exclude_idle 0 mmap 1 comm 1 mmap2 1 comm_exec 1 freq 1 inherit_stat 0 enable_on_exec 1 task 1 watermark 0 precise_ip 0 mmap_data 0 sample_id_all 1 exclude_host 0 exclude_guest 1 excl.callchain_kern 0 excl.callchain_user 0 wakeup_events 0 wakeup_watermark 0 bp_type 0 bp_addr 0 config1 0 bp_len 0 config2 0 branch_sample_type 0 sample_regs_user 0 sample_stack_user 0 sample_regs_intr 0 ------------------------------------------------------------ $ perf evlist -vv cycles: sample_freq=4000, size: 104, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, mmap2: 1, comm: 1, comm_exec: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1 Post: $ ./perf record -vv -e cycles -- sleep 1 ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD disabled 1 inherit 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ------------------------------------------------------------ $ ./perf evlist -vv cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Acked-by:
-
Peter Zijlstra authored
Teach perf-record about the new perf_event_attr::{use_clockid, clockid} fields. Add a simple parameter to set the clock (if any) to be used for the events to be recorded into the data file. Since we store the entire perf_event_attr in the EVENT_DESC section we also already store the used clockid in the data file. Signed-off-by: -
Yunlong Song authored
perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10 Since sched->replay_repeat is set to 10 as default, the sched->run_avg, sched->runavg_cpu_usage, and sched->runavg_parent_cpu_usage all use 10 to calculate their value. However, the replay_repeat can be changed to other value by using -r option, so the calculation above should use replay_repeat to achieve more accurate results instead of the default value 10. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1427809596-29559-10-git-send-email-yunlong.song@huawei.comSigned-off-by:
-
Yunlong Song authored
Enable to use perf.data when it is not owned by current user or root. Example: $ ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 5321918 Mar 25 15:14 perf.data $ sudo id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: $ sudo perf sched replay -f run measurement overhead: 98 nsecs sleep measurement overhead: 52909 nsecs the run test took 1000015 nsecs the sleep test took 1054253 nsecs File perf.data not owned by current user or root (use -f to override) As shown above, the -f option does not work at all. After this patch: $ sudo perf sched replay -f run measurement overhead: 221 nsecs sleep measurement overhead: 40514 nsecs the run test took 1000003 nsecs the sleep test took 1056098 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 ... ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 50.198, ravg: 50.20, cpu: 2335.18 / 2335.18 #2 : 219.099, ravg: 67.09, cpu: 2835.11 / 2385.17 #3 : 238.626, ravg: 84.24, cpu: 3278.26 / 2474.48 #4 : 200.364, ravg: 95.85, cpu: 2977.41 / 2524.77 #5 : 176.882, ravg: 103.96, cpu: 2801.35 / 2552.43 #6 : 191.093, ravg: 112.67, cpu: 2813.70 / 2578.56 #7 : 189.448, ravg: 120.35, cpu: 2809.21 / 2601.62 #8 : 200.637, ravg: 128.38, cpu: 2849.91 / 2626.45 #9 : 248.338, ravg: 140.37, cpu: 4380.61 / 2801.87 #10 : 511.139, ravg: 177.45, cpu: 3077.73 / 2829.45 As shown above, the -f option really works now. Besides for replay, -f option can also work for latency and map. Signed-off-by:
-
Yunlong Song authored
The soft maximum number of open files for a calling process is 1024, which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the hard maximum number of open files for a calling process is 4096, which is defined as INR_OPEN_MAX in include/uapi/linux/fs.h. Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of RLIMIT_NOFILE in include/asm-generic/resource.h. And the soft maximum number finally decides the limitation of the maximum files which are allowed to be opened. That is to say a process can use at most 1024 file descriptors for its o pened files, or an EMFILE error will happen. This error can be fixed by increasing the soft maximum number, under the constraint that the soft maximum number can not exceed the hard maximum number, or both soft and hard maximum number should be increased simultaneously with privilege. For perf sched replay, it uses sys_perf_event_open to create the file descriptor for each of the tasks in order to handle information of perf events. That is to say each task needs a unique file descriptor. In x86_64, there may be over 1024 or 4096 tasks correspoinding to the record in perf.data, which causes that no enough file descriptors can be used. As a result, EMFILE error happens and stops the replay process. To solve this problem, we adaptively increase the soft and hard maximum number of open files with a '-f' option. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ cat /proc/sys/fs/file-max 6815744 $ ulimit -Sn 1024 $ ulimit -Hn 4096 Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) Have a try with -f option $ perf sched replay -f ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ------------------------------------------------------------ #1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21 #2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66 #3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99 #4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67 #5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96 #6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82 #7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39 #8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59 #9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48 Signed-off-by:
-
Yunlong Song authored
Since there is sem_wait for each task in the wait_for_tasks(), e.g. sem_wait(&task->work_done_sem). The sem_wait can continue only when work_done_sem is greater than 0, or it will be blocked. For perf sched replay, one task may sem_post the work_done_sem of another task, which causes the work_done_sem of that task processed in a reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post... This sequence simulates the sched process of the running tasks at the time when perf sched record runs. As a result, all the tasks are required and their threads must be successfully created. If any one (task A) of the tasks fails to create its thread, then another task (task B), whose work_done_sem needs sem_post from that failed task A, may likely block itself due to seg_wait. And this is a dead halt, since task B's thread_func cannot continue at all. To solve this problem, perf sched replay should exit once any task fails to create its thread. Example: Test environment: x86_64 with 160 cores Before this patch: $ perf sched replay ... Error: sys_perf_event_open() syscall returned with -1 (Too many open files) ------------------------------------------------------------ <- dead halt After this patch: $ perf sched replay ... task 1551 ( <unknown>: 0), nr_events: 10 Error: sys_perf_event_open() syscall returned with -1 (Too many open files) $ As shown above, perf sched replay finishes the process after printing an error message and does not block itself. Signed-off-by:
-
Yunlong Song authored
The pr_err in self_open_counters() prints error message to stderr. Unlike stdout, stderr uses memory buffer on the stack of each calling process. The pr_err in self_open_counters() works in a thread called thread_func created in function create_tasks, which concurrently creates sched->nr_tasks threads. If the error happens and pr_err prints the error message in each of these threads, the stack size of the perf process (default is 8192 kbytes) will quickly run out and the segmentation fault will happen then. To solve this problem, pr_err with self_open_counters() should be moved from newly created threads to the old main thread of the perf process. Then the pr_err can work in a stable situation without the strange segmentation fault problem. Example: Test environment: x86_64 with 160 cores Before this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 Segmentation fault After this patch: $ perf sched replay ... task 1549 ( :163132: 163132), nr_events: 1 task 1550 ( :163540: 163540), nr_events: 1 task 1551 ( <unknown>: 0), nr_events: 10 ... As shown above, the result continues without any segmentation fault. Signed-off-by:
-
Yunlong Song authored
perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations Although the memory of pid_to_task can be allocated via calloc according to the value of /proc/sys/kernel/pid_max, it cannot handle the case when pid_max is changed after 'perf sched record' has created its perf.data. If the new pid_max configured in 'perf sched replay' is smaller than the old pid_max configured in 'perf sched record', then it will cause the assertion failure problem. To solve this problem, we realloc the memory of pid_to_task stepwise once the passed-in pid parameter in register_pid is larger than the current pid_max. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ perf sched record ls $ echo 5000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 5000 Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55356 nsecs the run test took 1000011 nsecs the sleep test took 1060940 nsecs perf: builtin-sched.c:337: register_pid: Assertion `!(pid >= (unsigned long)pid_max)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55611 nsecs the run test took 1000026 nsecs the sleep test took 1060486 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by:
-
Yunlong Song authored
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max The current memory allocation of struct task_desc *pid_to_task[MAX_PID] is in a permanent and preset way, and it has two problems: Problem 1: If the pid_max, which is the max number of pids in the system, is much smaller than MAX_PID (1024*1000), then it causes a waste of stack memory. This may happen in the case where the number of cpu cores is much smaller than 1000. Problem 2: If the pid_max is changed from the default value to a value larger than MAX_PID, then it will cause assertion failure problem. The maximum value of pid_max can be set to pid_max_max (see pidmap_init defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64, PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This value is much larger than MAX_PID, and will take up 32768 Kbytes (4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much larger than the default 8192 Kbytes of the stack size of calling process. Due to these two problems, we use calloc to allocate the memory of pid_to_task dynamically. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 $ echo 1025000 > /proc/sys/kernel/pid_max $ cat /proc/sys/kernel/pid_max 1025000 Run some applications until the pid of some process is greater than the value of MAX_PID (1024*1000). Before this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55480 nsecs the run test took 1000008 nsecs the sleep test took 1063151 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55435 nsecs the run test took 1000004 nsecs the sleep test took 1059312 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by:
-
Yunlong Song authored
Current MAX_PID is only 65536, which will cause assertion failure problem when CPU cores are more than 64 in x86_64. This is because the pid_max value in x86_64 is at least PIDS_PER_CPU_DEFAULT * num_possible_cpus() (see function pidmap_init defined in kernel/pid.c), where PIDS_PER_CPU_DEFAULT is 1024 (defined in include/linux/threads.h). Thus for MAX_PID = 65536, the correspoinding CPU cores are 65536/1024=64. This is obviously not enough at all for x86_64, and will cause an assertion failure problem due to BUG_ON(pid >= MAX_PID) in the codes. We increase MAX_PID value from 65536 to 1024*1000, which can be used in x86_64 with 1000 cores. This number is finally decided according to the limitation of stack size of calling process. Use 'ulimit -a', the result shows the stack size of any process is 8192 Kbytes, which is defined in include/uapi/linux/resource.h (#define _STK_LIM (8*1024*1024)). Thus we choose a large enough value for MAX_PID, and make it satisfy to the limitation of the stack size, i.e., making the perf process take up a memory space just smaller than 8192 Kbytes. We have calculated and tested that 1024*1000 is OK for MAX_PID. This means perf sched replay can now be used with at most 1000 cores in x86_64 without any assertion failure problem. Example: Test environment: x86_64 with 160 cores $ cat /proc/sys/kernel/pid_max 163840 Before this patch: $ perf sched replay run measurement overhead: 240 nsecs sleep measurement overhead: 55379 nsecs the run test took 1000004 nsecs the sleep test took 1059424 nsecs perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 65536)' failed. Aborted After this patch: $ perf sched replay run measurement overhead: 221 nsecs sleep measurement overhead: 55397 nsecs the run test took 999920 nsecs the sleep test took 1053313 nsecs nr_run_events: 10 nr_sleep_events: 1562 nr_wakeup_events: 5 task 0 ( :1: 1), nr_events: 1 task 1 ( :2: 2), nr_events: 1 task 2 ( :3: 3), nr_events: 1 task 3 ( :5: 5), nr_events: 1 ... Signed-off-by:
-
Yunlong Song authored
There is no struct task_task at all, thus it is a typo error in the old commits, now fix it to what it should be in order to avoid unnecessary misunderstanding. Signed-off-by:
-
Jiri Olsa authored
Currently the perf kmem does not respect -i option. Initializing the file.path properly after options get parsed. Signed-off-by:
-
Namhyung Kim authored
Currently it ignores operator priority and just sets processed args as a right operand. But it could result in priority inversion in case that the right operand is also a operator arg and its priority is lower. For example, following print format is from new kmem events. "page=%p", REC->pfn != -1UL ? (((struct page *)(0xffffea0000000000UL)) + (REC->pfn)) : ((void *)0) But this was treated as below: REC->pfn != ((null - 1UL) ? ((struct page *)0xffffea0000000000UL + REC->pfn) : (void *) 0) In this case, the right arg was '?' operator which has lower priority. But it just sets the whole arg so making the output confusing - page was always 0 or 1 since that's the result of logical operation. With this patch, it can handle it properly like following: ((REC->pfn != (null - 1UL)) ? ((struct page *)0xffffea0000000000UL + REC->pfn) : (void *) 0) Signed-off-by:
-
Wang Nan authored
This patch add checks in places where map__kmap is used to get kmaps from struct kmap. Error messages are added at map__kmap to warn invalid accessing of kmap (for the case of !map->dso->kernel, kmap(map) does not exists at all). Also, introduces map__kmaps() to warn uninitialized kmaps. Reviewed-by:
-
He Kuang authored
perf_evlist__mmap_consume() uses perf_mmap__empty() to judge whether perf_mmap is empty and can be released. But the result is inverted so fix it. Signed-off-by:
-
- 03 Apr, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Support unnamed union/structure members data collection in 'perf probe'. (Masami Hiramatsu) - Support missing -f to override perf.data file ownership. (Yunlong Song) Infrastructure changes: - No need to lookup thread twice when processing samples in 'perf script'. (Arnaldo Carvalho de Melo) - No need to pass thread twice to the scripting callbacks. (Arnaldo Carvalho de Melo) - No need to pass thread twice to the db-export facility. (Arnaldo Carvalho de Melo) Signed-off-by:
-
- 02 Apr, 2015 9 commits
-
-
Yunlong Song authored
Enable perf data convert to use perf.data when it is not owned by current user or root. Example: # perf record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr 2 17:35 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf data convert --to-ctf=./ctf-data/ File perf.data not owned by current user or root (use -f to override) # perf data convert --to-ctf=./ctf-data/ -f Error: unknown switch `f' usage: perf data convert [<options>] -v, --verbose be more verbose -i, --input <file> input file name --to-ctf ... Convert to CTF format After this patch: # perf data convert --to-ctf=./ctf-data/ File perf.data not owned by current user or root (use -f to override) # perf data convert --to-ctf=./ctf-data/ -f # ls ctf-data/ metadata perf_stream_0 As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf trace to use perf.data when it is not owned by current user or root. Example: # perf trace record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 4153101 Apr 2 15:28 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf trace -i perf.data File perf.data not owned by current user or root (use -f to override) # perf trace -i perf.data -f Error: unknown switch `f' usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] --event <event> event selector. use 'perf list' to list available events --comm show the thread COMM next to its id --tool_stats show tool stats -e, --expr <expr> list of events to trace -o, --output <file> output file name -i, --input <file> Analyze events in file -p, --pid <pid> trace events on existing process id -t, --tid <tid> trace events on existing thread id --filter-pids <float> ... As shown above, the -f option does not work at all. After this patch: # perf trace -i perf.data File perf.data not owned by current user or root (use -f to override) # perf trace -i perf.data -f 0.056 ( 0.002 ms): ls/47325 brk( ... 0.108 ( 0.018 ms): ls/47325 mmap(len: 4096, prot: READ|WRITE, ... 0.145 ( 0.013 ms): ls/47325 access(filename: 0x7f31259a0eb0, ... 0.172 ( 0.008 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ... 0.180 ( 0.004 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ... 0.185 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ... 0.189 ( 0.003 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ... 0.195 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ... 0.199 ( 0.002 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ... 0.205 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ... 0.211 ( 0.004 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ... 0.220 ( 0.007 ms): ls/47325 open(filename: 0x7f312599e8ff, ... ... ... As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf timechart to use perf.data when it is not owned by current user or root. Example: # perf timechart record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 5471744 Apr 2 15:15 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf timechart File perf.data not owned by current user or root (use -f to override) # perf timechart -f Error: unknown switch `f' usage: perf timechart [<options>] {record} -i, --input <file> input file name -o, --output <file> output file name -w, --width <n> page width --highlight <duration or task name> highlight tasks. Pass duration in ns or process name. -P, --power-only output power data only -T, --tasks-only output processes data only -p, --process <process> process selector. Pass a pid or process name. --symfs <directory> Look for files with symbols relative to this directory -n, --proc-num <n> min. number of tasks to print -t, --topology sort CPUs according to topology --io-skip-eagain skip EAGAIN errors --io-min-time <time> all IO faster than min-time will visually appear longer --io-merge-dist <time> merge events that are merge-dist us apart As shown above, the -f option does not work at all. After this patch: # perf timechart File perf.data not owned by current user or root (use -f to override) # perf timechart -f Written 0.0 seconds of trace to output.svg. # cat output.svg <?xml version="1.0" standalone="no"?> <!DOCTYPE svg SYSTEM "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd"> <svg width="1000" height="10110" version="1.1" xmlns="http://www.w3.org/2000/svg"> <defs> <style type="text/css"> <![CDATA[ rect { stroke-width: 1; } ... ... As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf script to use perf.data when it is not owned by current user or root. Change the short option name of --fields to -F to avoid confusion with --force. Example: # perf record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 28360 Apr 2 14:53 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf script File perf.data not owned by current user or root (use -f to override) # perf script -f Error: switch `f' requires a value usage: perf script [<options>] or: perf script [<options>] record <script> [<record-options>] <command> or: perf script [<options>] report <script> [script-args] or: perf script [<options>] <script> [<record-options>] <command> or: perf script [<options>] <top-script> [script-args] -f, --fields <str> comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period As shown above, the -f option does not work at all. And -f is already taken up by --fields, which makes --force confused, so change the short option name of --fields to -F like what other perf commands do (e.g. perf report -F) and use -f as the short option name of --force. After this patch: # perf script File perf.data not owned by current user or root (use -f to override) # perf script -f :41298 41298 2590086.564226: 1 cycles: ffffffff8103efc6 native_write_msr_safe ([kernel.kallsyms]) :41298 41298 2590086.564244: 1 cycles: ffffffff8103efc6 native_write_msr_safe ([kernel.kallsyms]) :41298 41298 2590086.564249: 7 cycles: ffffffff8103efc6 native_write_msr_safe ([kernel.kallsyms]) :41298 41298 2590086.564255: 176 cycles: ffffffff8103efc6 native_write_msr_safe ([kernel.kallsyms]) ls 41298 2590086.567346: 4059 cycles: ffffffff8105a592 raise_softirq ([kernel.kallsyms]) ls 41298 2590086.567353: 3717 cycles: ffffffff8105a592 raise_softirq ([kernel.kallsyms]) ls 41298 2590086.567358: 63058 cycles: ffffffff8105a592 raise_softirq ([kernel.kallsyms]) ls 41298 2590086.567448: 1706255 cycles: 406ae0 [unknown] (/usr/bin/ls) As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf mem to use perf.data when it is not owned by current user or root. Example: # perf mem -t load record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 16392 Apr 2 14:34 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf mem -D report File perf.data not owned by current user or root (use -f to override) # perf mem -D -f report Error: unknown switch `f' usage: perf mem [<options>] {record|report} -t, --type <type> memory operations(load,store) Default load,store -D, --dump-raw-samples dump raw samples in ASCII -U, --hide-unresolved Only display entries resolved to a symbol -i, --input <file> input file name -C, --cpu <cpu> list of cpus to profile -x, --field-separator <separator> separator for columns, no spaces will be added between columns '.' is reserved. As shown above, the -f option does not work at all. After this patch: # perf mem -D report File perf.data not owned by current user or root (use -f to override) # perf mem -D -f report # PID, TID, IP, ADDR, LOCAL WEIGHT, DSRC, SYMBOL 39095 39095 0xffffffff81127e40 0x016ffff887f45148338 8 0x68100142 /proc/kcore:perf_event_aux 39095 39095 0xffffffff8100a3fe 0xffff89007f8cb7d0 6 0x68100142 /proc/kcore:native_sched_clock 39095 39095 0xffffffff81309139 0xffff88bf44c9ded8 6 0x68100142 /proc/kcore:acpi_map_lookup 39095 39095 0xffffffff810f8c4c 0xffff89007f8ccd88 6 0x68100142 /proc/kcore:rcu_nmi_exit 39095 39095 0xffffffff81136346 0xffff88fea995dd50 6 0x68100142 /proc/kcore:unlock_page 39095 39095 0xffffffff812a64a2 0xffff88fea995dcc8 6 0x68100142 /proc/kcore:half_md4_transform 39095 39095 0x7f0cf877c7e9 0x25dfb94 6 0x68100142 /lib64/libc-2.19.so:__readdir64 39095 39095 0x7f0cf87575a3 0x7f0cf9163731 6 0x68100142 /lib64/libc-2.19.so:__strcoll_l 39095 39095 0xffffffff8116910e 0xffffea01c1bfbd50 23 0x68100242 /proc/kcore:page_remove_rmap As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf lock to use perf.data when it is not owned by current user or root. Example: # perf lock record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 4880686 Apr 2 14:14 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf lock report File perf.data not owned by current user or root (use -f to override) Initializing perf session failed # perf lock report -f Error: unknown switch `f' usage: perf lock report [<options>] -k, --key <acquired> key for sorting (acquired / contended / avg_wait / wait_total / wait_max / wait_min) As shown above, the -f option does not work at all. After this patch: # perf lock report File perf.data not owned by current user or root (use -f to override) Initializing perf session failed # perf lock report -f Name acquired contended avg wait (ns) total wait (ns) ... &ldata->output_l... 128 0 0 0 ... &ctx->lock 114 0 0 0 ... &p->pi_lock 112 0 0 0 ... &(&pool->lock)->... 112 0 0 0 ... &(&dentry->d_loc... 70 0 0 0 ... &(&newf->file_lo... 62 0 0 0 ... &(&fs->lock)->rl... 43 0 0 0 ... ... As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf kvm to use perf.data.guest when it is not owned by current user or root. Example: # perf kvm stat record ls # chown Yunlong.Song:Yunlong.Song perf.data.guest # ls -al perf.data.guest -rw------- 1 Yunlong.Song Yunlong.Song 4128937 Apr 2 11:05 perf.data.guest # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf kvm stat report File perf.data.guest not owned by current user or root (use -f to override) Initializing perf session failed # perf kvm stat report -f Error: unknown switch `f' usage: perf kvm stat report [<options>] --event <report event> event for reporting: vmexit, mmio (x86 only), ioport (x86 only) --vcpu <n> vcpu id to report -k, --key <sort-key> key for sorting: sample(sort by samples number) time (sort by avg time) -p, --pid <pid> analyze events only for given process id(s) As shown above, the -f option does not work at all. After this patch: # perf kvm stat report File perf.data.guest not owned by current user or root (use -f to override) Initializing perf session failed # perf kvm stat report -f Analyze events for all VMs, all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time Total Samples:0, Total events handled time:0.00us. As shown above, the -f option really works now. Since we have not launched any KVM related process, the result shows 0 sample here. Signed-off-by: -
Yunlong Song authored
Enable perf kmem to use perf.data when it is not owned by current user or root. Example: # perf kmem record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 5315665 Apr 2 10:54 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf kmem stat File perf.data not owned by current user or root (use -f to override) # perf kmem stat -f Error: unknown switch `f' usage: perf kmem [<options>] {record|stat} -i, --input <file> input file name -v, --verbose be more verbose (show symbol address, etc) --caller show per-callsite statistics --alloc show per-allocation statistics -s, --sort <key[,key2...]> sort by keys: ptr, call_site, bytes, hit, pingpong, frag -l, --line <num> show n lines --raw-ip show raw ip instead of symbol As shown above, the -f option does not work at all. After this patch: # perf kmem stat File perf.data not owned by current user or root (use -f to override) # perf kmem stat -f SUMMARY ======= Total bytes requested: 437599 Total bytes allocated: 615472 Total bytes wasted on internal fragmentation: 177873 Internal fragmentation: 28.900259% Cross CPU allocations: 6/1192 As shown above, the -f option really works now. Signed-off-by: -
Yunlong Song authored
Enable perf inject to use perf.data when it is not owned by current user or root. Example: # perf record ls # chown Yunlong.Song:Yunlong.Song perf.data # ls -al perf.data -rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr 2 10:37 perf.data # id uid=0(root) gid=0(root) groups=0(root),64(pkcs11) Before this patch: # perf inject -v -b -i perf.data -o perf.data.new File perf.data not owned by current user or root (use -f to override) # perf inject -v -b -i perf.data -o perf.data.new -f Error: unknown switch `f' usage: perf inject [<options>] -b, --build-ids Inject build-ids into the output stream -i, --input <file> input file name -o, --output <file> output file name -s, --sched-stat Merge sched-stat and sched-switch for getting events where and how long tasks slept -v, --verbose be more verbose (show build ids, etc) --kallsyms <file> kallsyms pathname As shown above, the -f option does not work at all. After this patch: # perf inject -v -b -i perf.data -o perf.data.new File perf.data not owned by current user or root (use -f to override) # perf inject -v -b -i perf.data -o perf.data.new -f build id event received for [kernel.kallsyms]: f6dcb66d8b98f1c0d9eb87bf043444b69f91d30c symsrc__init: cannot get elf header. Looking at the vmlinux_path (7 entries long) Using /proc/kcore for kernel object code Using /proc/kallsyms for symbols As shown above, the -f option really works now. Signed-off-by:
-
