- 24 Jan, 2014 14 commits
-
-
Oliver Hartkopp authored
The two commits 0115e8e3 (net: remove delay at device dismantle) and 748e2d93 (net: reinstate rtnl in call_netdevice_notifiers()) silently removed a NULL pointer check for in_dev since Linux 3.7. This patch re-introduces this check as it causes crashing the kernel when setting small mtu values on non-ip capable netdevices. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Please pull these fixes for the 3.14 stream! For the iwlwifi fix, Emmanuel says: "A critical bug has been reported on all NICs supported by iwldvm. iwlwifi would simply panic upon interface up This patch fixes this. The offending code is by me and is present in wireless-next.git and hence in net-next.git." Along with that... Andreas Fenkart corrects a WoWLAN problem with mwifiex. Roman Dubtsov adds a device ID to rt2800usb. Sujith Manoharan re-enables a mistakenly commented-out line of code in ath9k, and also fixes and interrupt mitigation issue for that driver. ZHAO Gang fixes an incorrect assignment (reverse/wrong API call) in b43. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
Jiri Pirko authored
This is in net-next only, for couple of days. Not used anymore, and never should have been. So just remove it and pretend it was never there. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
This check is not needed because the same check is done before fill_slave_info is used in rtnl_link_slave_info_fill. Also, by removing this check, kernel will fillup IFLA_INFO_SLAVE_KIND even for slaves of masters which does not implement fill_slave_info. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Himanshu Madhani says: ==================== qlcnic: Refactoring and enhancements for all adapters. This patch series contains following patches. o Enhanced debug data collection when we are in Tx-timeout situation. o Enhanced MSI-x vector calculation for defualt load path as well as for TSS/RSS ring change path. o Refactored interrupt coalescing code for all adapters. o Refactored interrupt handling as well as cleanup of poll controller code patch for all adapters. o changed rx_mac_learn type to boolean. Please apply to net-next. ==================== Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Himanshu Madhani authored
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Himanshu Madhani authored
o Refactored MSI-x vector calculation for All adapters. Decoupled logic in the code which was using same call to request MSI-x vectors in default driver load, as well as during set_channel() operation for TSS/RSS. This refactoring simplifies code for TSS/RSS code path as well as probe path of the driver load for all adapters. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Himanshu Madhani authored
o Refactor configuration of interrupt coalescing parameters for all supported adapters. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish chopra authored
Add support for MSI/MSI-X mode in poll controller routine. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish chopra authored
o Added hardware ops for interrupt enable/disable functions Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Himanshu Madhani authored
o Dump each Tx queue details with all descriptors, queue indices and Tx queue stats to imporve data colletion in situations where Tx timeout occurs. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sucheta Chakraborty authored
o Use boolean type instead of u8. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
After the option conversion downdelay and updelay divide a u64 and on a 32 bit this causes the following errors: ERROR: "__udivdi3" [drivers/net/bonding/bonding.ko] undefined! ERROR: "__umoddi3" [drivers/net/bonding/bonding.ko] undefined! Fix it by using a normal int instead because newval->value is capped at INT_MAX by the way the option is defined. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jan, 2014 26 commits
-
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
As part of a workaround for a hardware erratum in the SFC9100 family (SF bug 35388), the TX_DESC_UPD_DWORD register address is also used for communicating with the event block, and only descriptor pointer values < 2048 are valid. If the TX DMA ring size is increased to 4096 descriptors (which the firmware still allows) then we may write a descriptor pointer value >= 2048, which has entirely different and undesirable effects! Limit the TX DMA ring size correctly when this workaround is in effect. Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shradha Shah authored
I will be taking over the work from Ben Hutchings. Signed-off-by: Shradha Shah <sshah@solarflare.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Make sure the practice set by commit 0afb1666 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
In this situation then ARRAY_SIZE() and sizeof() are the same, but we're really dealing with array indexes and not byte offsets so ARRAY_SIZE() is cleaner. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Duan Jiong authored
commit a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach") clear IPCB in ip_tunnel_xmit() , or else skb->cb[] may contain garbage from GSO segmentation layer. But commit 0e6fbc5b("ip_tunnels: extend iptunnel_xmit()") refactor codes, and it clear IPCB behind the dst_link_failure(). So clear IPCB in ip_tunnel_xmit() just like commti a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach"). Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
We possibly retrieve the adapter's statistics during EEH recovery and that should be disallowed. Otherwise, it would possibly incur replicate EEH error and EEH recovery is going to fail eventually. The patch reuses statistics lock and checks net_device is attached before going to retrieve statistics, so that the problem can be avoided. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
If we have EEH error happens to the adapter and we have to remove it from the system for some reasons (e.g. more than 5 EEH errors detected from the device in last hour), the adapter will be disabled for towice separately by eeh_err_detected() and remove_one(), which will incur following unexpected backtrace. The patch tries to avoid it. WARNING: at drivers/pci/pci.c:1431 CPU: 12 PID: 121 Comm: eehd Not tainted 3.13.0-rc7+ #1 task: c0000001823a3780 ti: c00000018240c000 task.ti: c00000018240c000 NIP: c0000000003c1e40 LR: c0000000003c1e3c CTR: 0000000001764c5c REGS: c00000018240f470 TRAP: 0700 Not tainted (3.13.0-rc7+) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 00000004 CFAR: c000000000706528 SOFTE: 1 GPR00: c0000000003c1e3c c00000018240f6f0 c0000000010fe1f8 0000000000000035 GPR04: 0000000000000000 0000000000000000 00000000003ae509 0000000000000000 GPR08: 000000000000346f 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000028000022 c00000000ec93000 c0000000000c11b0 c000000184ac3e40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c0000000009398d8 c00000000101f9c0 c0000001860ae000 GPR28: c000000182ba0000 00000000000001f0 c0000001860ae6f8 c0000001860ae000 NIP [c0000000003c1e40] .pci_disable_device+0xd0/0xf0 LR [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 Call Trace: [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 (unreliable) [d0000000073881c4] .remove_one+0x174/0x320 [cxgb4] [c0000000003c57e0] .pci_device_remove+0x60/0x100 [c00000000046396c] .__device_release_driver+0x9c/0x120 [c000000000463a20] .device_release_driver+0x30/0x60 [c0000000003bcdb4] .pci_stop_bus_device+0x94/0xd0 [c0000000003bcf48] .pci_stop_and_remove_bus_device+0x18/0x30 [c00000000003f548] .pcibios_remove_pci_devices+0xa8/0x140 [c000000000035c00] .eeh_handle_normal_event+0xa0/0x3c0 [c000000000035f50] .eeh_handle_event+0x30/0x2b0 [c0000000000362c4] .eeh_event_handler+0xf4/0x1b0 [c0000000000c12b8] .kthread+0x108/0x130 [c00000000000a168] .ret_from_kernel_thread+0x5c/0x74 Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Enable promiscuous mode support for CPSW. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
When we have multiple devices attempting to sync the same address to a single destination, each device should be permitted to sync it once. To accomplish this, pass the 'sync_cnt' of the source address when adding the addresss to the lower device. 'sync_cnt' tracks how many time a given address has been succefully synced. This way, we know that if the 'sync_cnt' passed in is 0, we should sync this address. Also, turn 'synced' member back into the counter as was originally done in commit 4543fbef. net: count hw_addr syncs so that unsync works properly. It tracks how many time a given address has been added via a 'sync' operation. For every successfull 'sync' the counter is incremented, and for ever 'unsync', the counter is decremented. This makes sure that the address will be properly removed from the the lower device when all the upper devices have removed it. Reported-by: Andrey Dmitrov <andrey.dmitrov@oktetlabs.ru> CC: Andrey Dmitrov <andrey.dmitrov@oktetlabs.ru> CC: Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> CC: Konstantin Ushakov <Konstantin.Ushakov@oktetlabs.ru> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shlomo Pongratz authored
Fixed few issues around using __rcu prefix and rcu_assign_pointer, also fixed a warning print to use ntohs(port) and not htons(port). net/ipv4/udp_offload.c:112:9: error: incompatible types in comparison expression (different address spaces) net/ipv4/udp_offload.c:113:9: error: incompatible types in comparison expression (different address spaces) net/ipv4/udp_offload.c:176:19: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Paasch authored
A socket may be v6/v4-mapped. In that case sk->sk_family is AF_INET6, but the IP being used is actually an IPv4-address. Current's tcp-metrics will thus represent it as an IPv6-address: root@server:~# ip tcp_metrics ::ffff:10.1.1.2 age 22.920sec rtt 18750us rttvar 15000us cwnd 10 10.1.1.2 age 47.970sec rtt 16250us rttvar 10000us cwnd 10 This patch modifies the tcp-metrics so that they are able to handle the v6/v4-mapped sockets correctly. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sujith Manoharan authored
The threshold values for RX interrupt mitigation are different for AR9003 and AR9002 families. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Roman Dubtsov authored
Signed-off-by: Roman Dubtsov <dubtsov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
The commit "ath9k: Process GTT interrupts" accidentally had a line that was commented out. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
ZHAO Gang authored
Use the right function to update frequency value. If rx skb is probe response or beacon, the wrong frequency value can cause problem that bss info can't be updated when it should be. Cc: <stable@vger.kernel.org> Fixes: 8318d78a ("cfg80211 API for channels/bitrates, mac80211 and driver conversion") Signed-off-by: ZHAO Gang <gamerh2o@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Andreas Fenkart authored
8 bytes preamble 14 bytes src/dst/eth_type 6 bytes 0xff:0xff.. http://en.wikipedia.org/wiki/Wake-on-LAN#Magic_packet http://en.wikipedia.org/wiki/EtherType This will fail if we VLAN or the magic packet is encapsulated as a UDP packet... Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Yann Droneaud authored
Since commit 8df8c56a, 6lowpan_iphc is a module of its own. Unfortunately, it lacks some infrastructure to behave like a good kernel citizen: kernel: 6lowpan_iphc: module license 'unspecified' taints kernel. kernel: Disabling lock debugging due to kernel taint This patch adds the basic MODULE_LICENSE(); with GPL license: the code was copied from net/ieee802154/6lowpan.c which is GPL and the module exports symbol with EXPORT_SYMBOL_GPL();. Cc: Jukka Rissanen <jukka.rissanen@linux.intel.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weilong Chen authored
Like bonding, team as netdevice doesn't cross netns boundaries. Team ports and team itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weilong Chen authored
Like bridge, bonding as netdevice doesn't cross netns boundaries. Bonding ports and bonding itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
No longer used API bond-specific can be removed now. This is now handled in a generic way in rtnl_link_ops. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Recent patch bonding: add netlink attributes to slave link dev (1d3ee88a) Introduced yet another device specific way to access slave information over rtnetlink. There is one already there for bridge. This patch introduces generic way to do this, for getting and setting info as well by extending link_ops. Later on, this new interface will be used for bridge ports as well. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Allow user to identify easily what the attributes are related to. Change the name of the group to "bonding_slave" to be similar to master which is named "bonding". Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-