This patch is to remove the typedef sctp_cmsgs_t, and
replace with struct sctp_cmsgs in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_endpoint_type_t, and
replace with enum sctp_endpoint_type in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_sender_hb_info_t, and
replace with struct sctp_sender_hb_info in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove this function typedef, there is even no places
using it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mainline had UFO fixes, but UFO is removed in net-next so we
take the HEAD hunks.

Minor context conflict in bcmsysport statistics bug fix.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.

 2) Fix stats handling in bcm_sysport_get_stats(), from Florian
    Fainelli.

 3) Reject 16777215 VNI value in geneve_validate(), from Girish
    Moodalbail.

 4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.

 5) Once a UFO fragmented frame is treated as UFO, we should continue
    doing so. Likewise once a frame has been segmented, we should
    continue doing that and not try to convert it to a UFO frame. From
    Willem de Bruijn.

 6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
    prevent races. From Willem de Bruijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  packet: fix tp_reserve race in packet_set_ring
  udp: consistently apply ufo or fragmentation
  net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
  igmp: Fix regression caused by igmp sysctl namespace code.
  geneve: maximum value of VNI cannot be used
  net: systemport: Fix software statistics for SYSTEMPORT Lite
  tipc: remove premature ESTABLISH FSM event at link synchronization

Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.

This bug was discovered by syzkaller.

Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.

Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.

Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.

A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.

Found by syzkaller.

Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
rtnetlink: fix initial rtnl pushdown fallout

This series fixes various bugs and splats reported since the
allow-handler-to-run-with-no-rtnl series went in.

Last patch adds a script that can be used to add further
tests in case more bugs are reported.
In case you prefer reverting the original series instead of
fixing fallout I can resend this patch on its own.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

add a simple script to exercise some rtnetlink call paths, so KASAN,
lockdep etc. can yell at developer before patches are sent upstream.

This can be extended to also cover bond, team, vrf and the like.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to use PF_UNSPEC in case the requested family has no doit
callback, otherwise this now fails with EOPNOTSUPP instead of running the
unspec doit callback, as before.

Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

If using CONFIG_REFCOUNT_FULL=y we get following splat:
 refcount_t: increment on 0; use-after-free.
WARNING: CPU: 0 PID: 304 at lib/refcount.c:152 refcount_inc+0x47/0x50
Call Trace:
 rtnetlink_rcv_msg+0x191/0x260
 ...

This warning is harmless (0 is "no callback running", not "memory
was freed").

Use '1' as the new 'no handler is running' base instead of 0 to avoid
this.

Fixes: 019a3169 ("rtnetlink: add reference counting to prevent module unload while dump is in progress")
Reported-by: Sabrina Dubroca <sdubroca@redhat.com>
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern reports following splat:
 RTNL: assertion failed at net/core/dev.c (5717)
 netdev_master_upper_dev_get+0x5f/0x70
 if_nlmsg_size+0x158/0x240
 rtnl_calcit.isra.26+0xa3/0xf0

rtnl_link_get_slave_info_data_size currently assumes RTNL protection, but
there appears to be no hard requirement for this, so use rcu instead.

At the time of this writing, there are three 'get_slave_size' callbacks
(now invoked under rcu): bond_get_slave_size, vrf_get_slave_size and
br_port_get_slave_size, all return constant only (i.e. they don't sleep).

Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Userspace sends RTM_GETLINK type, but the kernel substracts
RTM_BASE from this, i.e. 'type' doesn't contain RTM_GETLINK
anymore but instead RTM_GETLINK - RTM_BASE.

This caused the calcit callback to not be invoked when it
should have been (and vice versa).

While at it, also fix a off-by one when checking family index. vs
handler array size.

Fixes: e1fa6d21 ("rtnetlink: call rtnl_calcit directly")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido reports a rcu splat in __rtnl_register.
The splat is correct; as rtnl_register doesn't grab any logs
and doesn't use rcu locks either.  It has always been like this.
handler families are not registered in parallel so there are no
races wrt. the kmalloc ordering.

The only reason to use rcu_dereference in the first place was to
avoid sparse from complaining about this.

Thus this switches to _raw() to not have rcu checks here.

The alternative is to add rtnl locking to register/unregister,
however, I don't see a compelling reason to do so as this has been
lockless for the past twenty years or so.

Fixes: 6853dd48 ("rtnetlink: protect handler table with rcu")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sparc updates from David Miller:

 1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.

 2) Prevent crashes when bringing up sunvdc virtual block devices in
    some environments. From Jim Quigley.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
  sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
  sparc64: recognize and support sparc M8 cpu type
  sparc64: properly name the cpu constants

The following error was introduced by
commit 43e66528 ("net-next: dsa: fix flow dissection")
due to a missing #if guard

net/core/flow_dissector.c: In function '__skb_flow_dissect':
net/core/flow_dissector.c:448:18: error: 'struct net_device' has no member named 'dsa_ptr'
ops = skb->dev->dsa_ptr->tag_ops;
                ^
make[3]: *** [net/core/flow_dissector.o] Error 1
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Crispin says:

====================
net-next: dsa: fix flow dissection

RPS and probably other kernel features are currently broken on some if not
all DSA devices. The root cause of this is that skb_hash will call the
flow_dissector. At this point the skb still contains the magic switch
header and the skb->protocol field is not set up to the correct 802.3
value yet. By the time the tag specific code is called, removing the header
and properly setting the protocol an invalid hash is already set. In the
case of the mt7530 this will result in all flows always having the same
hash.

Changes since RFC:
* use a callback instead of static values
* add cover letter
====================
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RPS and probably other kernel features are currently broken on some if not
all DSA devices. The root cause of this is that skb_hash will call the
flow_dissector. At this point the skb still contains the magic switch
header and the skb->protocol field is not set up to the correct 802.3
value yet. By the time the tag specific code is called, removing the header
and properly setting the protocol an invalid hash is already set. In the
case of the mt7530 this will result in all flows always having the same
hash.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MT7530 inserts the 4 magic header in between the 802.3 address and
protocol field. The patch implements the callback that can be called by
the flow dissector to figure out the real protocol and offset of the
network header. With this patch applied we can properly parse the packet
and thus make hashing function properly.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the flow dissector first sees packets coming in on a DSA devices the
802.3 header wont be located where the code expects it to be as the tag
is still present. Adding this new callback allows a DSA device to provide a
new function that the flow_dissector can use to get the correct protocol
and offset of the network header.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to access this struct from within the flow_dissector to fix
dissection for packets coming in on DSA devices.
Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 55917a21 ("netfilter: x_tables: add context to know if
extension runs from nft_compat") introduced a member nft_compat to
xt_tgchk_param structure.

But it didn't set it's value for ipt_init_target. With unexpected
value in par.nft_compat, it may return unexpected result in some
target's checkentry.

This patch is to set all it's fields as 0 and only initialize the
non-zero fields in ipt_init_target.

v1->v2:
  As Wang Cong's suggestion, fix it by setting all it's fields as
  0 and only initializing the non-zero fields.

Fixes: 55917a21 ("netfilter: x_tables: add context to know if extension runs from nft_compat")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dcd87999 ("igmp: net: Move igmp namespace init to correct file")
moved the igmp sysctls initialization from tcp_sk_init to igmp_net_init. This
function is only called as part of per-namespace initialization, only if
CONFIG_IP_MULTICAST is defined, otherwise igmp_mc_init() call in ip_init is
compiled out, casuing the igmp pernet ops to not be registerd and those sysctl
being left initialized with 0. However, there are certain functions, such as
ip_mc_join_group which are always compiled and make use of some of those
sysctls. Let's do a partial revert of the aforementioned commit and move the
sysctl initialization into inet_init_net, that way they will always have
sane values.

Fixes: dcd87999 ("igmp: net: Move igmp namespace init to correct file")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196595Reported-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Crispin says:

====================
net-next: mediatek: bring up QDMA RX ring 0

The MT7623 has several DMA rings. Inside the SW path, the core will use
the PDMA when receiving traffic. While bringing up the HW path we noticed
that the PPE requires the QDMA RX to also be brought up as it uses this
ring internally for its flow scheduling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is in preparation for adding HW flow and QoS offloading. For
those features to work, the driver needs to bring up the first QDMA RX
ring. This ring is used by the PPE offloading HW.
Signed-off-by: John Crisp in <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial patch fixing 2 typos.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these const as they are only stored in the ops field of a atm_dev
structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these structures const as they are either passed to the function
atm_dev_register having the corresponding argument as const or stored in
the ops field of a atm_dev structure, which is also const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make these structures const as they are only stored in the ops field of
a dsa_switch structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Disable napi when interface is going down.
Delete napi when destroying the interface.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geneve's Virtual Network Identifier (VNI) is 24 bit long, so the range
of values for it would be from 0 to 16777215 (2^24 -1).  However, one
cannot create a geneve device with VNI set to 16777215. This patch fixes
this issue.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ndisc_notify is used to send unsolicited neighbor advertisements
(e.g., on a link up). Currently, the ndisc notifier is run before the
addrconf notifer which means NA's are not sent for link-local addresses
which are added by the addrconf notifier.

Fix by lowering the priority of the ndisc notifier. Setting the priority
to ADDRCONF_NOTIFY_PRIORITY - 5 means it runs after addrconf and before
the route notifier which is ADDRCONF_NOTIFY_PRIORITY - 10.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With SYSTEMPORT Lite we have holes in our statistics layout that make us
skip over the hardware MIB counters, bcm_sysport_get_stats() was not
taking that into account resulting in reporting 0 for all SW-maintained
statistics, fix this by skipping accordingly.

Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a link between two nodes come up, both endpoints will initially
send out a STATE message to the peer, to increase the probability that
the peer endpoint also is up when the first traffic message arrives.
Thereafter, if the establishing link is the second link between two
nodes, this first "traffic" message is a TUNNEL_PROTOCOL/SYNCH message,
helping the peer to perform initial synchronization between the two
links.

However, the initial STATE message may be lost, in which case the SYNCH
message will be the first one arriving at the peer. This should also
work, as the SYNCH message itself will be used to take up the link
endpoint before  initializing synchronization.

Unfortunately the code for this case is broken. Currently, the link is
brought up through a tipc_link_fsm_evt(ESTABLISHED) when a SYNCH
arrives, whereupon __tipc_node_link_up() is called to distribute the
link slots and take the link into traffic. But, __tipc_node_link_up() is
itself starting with a test for whether the link is up, and if true,
returns without action. Clearly, the tipc_link_fsm_evt(ESTABLISHED) call
is unnecessary, since tipc_node_link_up() is itself issuing such an
event, but also harmful, since it inhibits tipc_node_link_up() to
perform the test of its tasks, and the link endpoint in question hence
is never taken into traffic.

This problem has been exposed when we set up dual links between pre-
and post-4.4 kernels, because the former ones don't send out the
initial STATE message described above.

We fix this by removing the unnecessary event call.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a248878d ("ibmvnic: Check for transport event on driver resume")
removed the loop to kick irqs on driver resume but didn't remove the now
unused loop variable 'i'.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To ease debugging of the ibmvnic driver add a series of netdev_dbg()
statements to track driver status, especially during initialization,
removal, and resetting of the driver.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that any resources allocated during probe are released if the
probe of the driver fails.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using mpgroup to define multiple paths for a virtual disk causes multiple
virtual-device-port ports to be created for that virtual device.
Each virtual-device-port port then gets a vdisk created for it by the Linux
sunvdc driver. As mpgroup is not supported by the Linux sunvdc driver it
cannot handle multiple ports for a single vdisk, leading to a kernel panic
at startup.

This fix prevents more than one vdisk per virtual-device-port being created
until full virtual disk multipathing (mpgroup) support is implemented.
Signed-off-by: Jim Quigley <Jim.Quigley@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
rtnetlink: allow selected handlers to run without rtnl

Changes since v1:
 In patch 6, don't make ipv6 route handlers lockless, they all have
 assumptions on rtnl being held.  Other patches are unchanged.

The RTNL mutex is used to serialize both rtnetlink calls and
dump requests.
Its also used to protect other things such as the list of current
net namespaces.

Unfortunately RTNL mutex is a performance issue, e.g. a cpu adding an
ip address prevents other cpus from seemingly unrelated tasks such as
dumping tc classifiers or doing rtnetlink route lookups.

This patch set adds basic infrastructure to start pushing the rtnl lock
down to those places that need it, or even elide it entirely in some cases.

Subsystems can now indicate that their doit() callback can run without
RTNL mutex, such callbacks can then run in parallel.

This will obviously need a lot of followup work; all current
users need to be audited/changed to benefit from this.
Initial no-rtnl spot is netns new/getid.

We have various 'get' handlers that are also a tempting target,
however, several of these depend on rtnl mutex to prevent information
from changing while objects are being read by rtnl handlers; however,
it doesn't appear impossible to change this.

Dumps are another problem entirely, see
commit 2907c35f ("net: hold rtnl again in dump callbacks"),
this patchset doesn't touch dump requests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>