- 22 Aug, 2016 40 commits
-
-
Luis de Bethencourt authored
commit ef3149eb upstream. sca3000_read_ctrl_reg() returns a negative number on failure, check for this instead of zero. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Torsten Hilbrich authored
commit 63d2f95d upstream. The value `bytes' comes from the filesystem which is about to be mounted. We cannot trust that the value is always in the range we expect it to be. Check its value before using it to calculate the length for the crc32_le call. It value must be larger (or equal) sumoff + 4. This fixes a kernel bug when accidentially mounting an image file which had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance. The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a s_bytes value of 1. This caused an underflow when substracting sumoff + 4 (20) in the call to crc32_le. BUG: unable to handle kernel paging request at ffff88021e600000 IP: crc32_le+0x36/0x100 ... Call Trace: nilfs_valid_sb.part.5+0x52/0x60 [nilfs2] nilfs_load_super_block+0x142/0x300 [nilfs2] init_nilfs+0x60/0x390 [nilfs2] nilfs_mount+0x302/0x520 [nilfs2] mount_fs+0x38/0x160 vfs_kern_mount+0x67/0x110 do_mount+0x269/0xe00 SyS_mount+0x9f/0x100 entry_SYSCALL_64_fastpath+0x16/0x71 Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Anthony Romano authored
commit b9b4bb26 upstream. When fallocate is interrupted it will undo a range that extends one byte past its range of allocated pages. This can corrupt an in-use page by zeroing out its first byte. Instead, undo using the inclusive byte range. Fixes: 1635f6a7 ("tmpfs: undo fallocation on failure") Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.comSigned-off-by:
Anthony Romano <anthony.romano@coreos.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Brandon Philips <brandon@ifup.co> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: use PAGE_CACHE_SHIFT instead of PAGE_SHIFT] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Steve French authored
commit 4fcd1813 upstream. Azure server blocks clients that open a socket and don't do anything on it. In our reconnect scenarios, we can reconnect the tcp session and detect the socket is available but we defer the negprot and SMB3 session setup and tree connect reconnection until the next i/o is requested, but this looks suspicous to some servers who expect SMB3 negprog and session setup soon after a socket is created. In the echo thread, reconnect SMB3 sessions and tree connections that are disconnected. A later patch will replay persistent (and resilient) handle opens. Signed-off-by:
Steve French <steve.french@primarydata.com> Acked-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
commit 99965378 upstream. Use set_posix_acl, which includes proper permission checks, instead of calling ->set_acl directly. Without this anyone may be able to grant themselves permissions to a file by setting the ACL. Lock the inode to make the new checks atomic with respect to set_acl. (Also, nfsd was the only caller of set_acl not locking the inode, so I suspect this may fix other races.) This also simplifies the code, and ensures our ACLs are checked by posix_acl_valid. The permission checks and the inode locking were lost with commit 4ac7249e, which changed nfsd to use the set_acl inode operation directly instead of going through xattr handlers. Reported-by:
David Sinquin <david@sinquin.eu> [agreunba@redhat.com: use set_posix_acl] Fixes: 4ac7249e Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [carnil: backport for 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Andreas Gruenbacher authored
commit 485e71e8 upstream. Factor out part of posix_acl_xattr_set into a common function that takes a posix_acl, which nfsd can also call. The prototype already exists in include/linux/posix_acl.h. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [carnil: backport to 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Takashi Iwai authored
commit d5dbbe65 upstream. syzkaller fuzzer spotted a potential use-after-free case in snd-dummy driver when hrtimer is used as backend: > ================================================================== > BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr ffff88005e5b6f68 > Read of size 8 by task syz-executor/8984 > ============================================================================= > BUG kmalloc-192 (Not tainted): kasan: bad access detected > ----------------------------------------------------------------------------- > > Disabling lock debugging due to kernel taint > INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=18446705582212484632 > .... > [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464 > .... > INFO: Freed in 0xfffd8e09 age=18446705496313138713 cpu=2164287125 pid=-1 > [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481 > .... > Call Trace: > [<ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333 > [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111 > [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218 > [<ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427 > [<ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86 > [<ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903 > [< inline >] remove_hrtimer kernel/time/hrtimer.c:945 > [<ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046 > [<ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066 > [<ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417 > [<ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507 > [<ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106 > [<ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956 > [<ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974 > [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139 > [<ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784 > [<ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805 > [<ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976 > [<ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020 > [<ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693 > [<ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483 > ..... A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which is called certainly before other blocking ops. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Scott Bauer authored
commit 93a2001b upstream. This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Signed-off-by:
Scott Bauer <sbauer@plzdonthack.me> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Jerome Marchand authored
commit b8da344b upstream. In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated statically and its size is an "empirical" 5*sizeof(struct _AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value comes from or if it was ever appropriate, but it is currently insufficient: the user and domain name in UTF16 could take 1kB by themselves. Because of that, build_ntlmssp_auth_blob() might corrupt memory (out-of-bounds write). The size of ntlmssp_blob in SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE) + 500). This patch allocates the blob dynamically in build_ntlmssp_auth_blob(). Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> [bwh: Backported to 3.16: adjust context, indentation] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Jerome Marchand authored
commit 202d772b upstream. Currently in build_ntlmssp_auth_blob(), when converting the domain name to UTF16, CIFS_MAX_USERNAME_LEN limit is used. It should be CIFS_MAX_DOMAINNAME_LEN. This patch fixes this. Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Dmitry Torokhov authored
commit 226ba707 upstream. The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by:
Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by:
Patrick Lessard <Patrick.Lessard@cogeco.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ping Cheng authored
commit 12afb344 upstream. Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by:
Ping Cheng <pingc@wacom.com> Reviewed-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Dotan Barak authored
commit 5b420d9c upstream. When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc). If at a later point (in procedure create_qp_common) the qp creation fails, this qp object must be freed. Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by:
Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Yishai Hadas authored
commit 5533c18a upstream. In procedure mlx4_ib_create_flow, passing an invalid port number will cause an out-of-bounds array access. Data passed to this procedure can come from user-space. Therefore, need to validate port number before proceeding onwards. Note that we check against the number of physical ports declared at the verbs (ib core) level; When bonding is active, the verbs level sees one physical port, even though the low-level driver sees two ports. Fixes: f77c0162 ("IB/mlx4: Add receive flow steering support") Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: - Adjust context - Function returns an integer, not a pointer/error] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Yishai Hadas authored
commit a6100603 upstream. Fix mad send error flow to prevent double freeing address handles, and leaking tx_ring entries when SRIOV is active. If ib_mad_post_send fails, the address handle pointer in the tx_ring entry must be set to NULL (or there will be a double-free) and tx_tail must be incremented (or there will be a leak of tx_ring entries). The tx_ring is handled the same way in the send-completion handler. Fixes: 37bfc7c1 ("IB/mlx4: SR-IOV multiplex and demultiplex MADs") Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Yishai Hadas authored
commit f2940e2c upstream. When calculating the required size of an RC QP send queue, leave enough space for masked atomic operations, which require more space than "regular" atomic operation. Fixes: 6fa8f719 ("IB/mlx4: Add support for masked atomic operations") Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@mellanox.co.il> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Eli Cohen authored
commit c9b25495 upstream. If the caller specified IB_SEND_FENCE in the send flags of the work request and no previous work request stated that the successive one should be fenced, the work request would be executed without a fence. This could result in RDMA read or atomic operations failure due to a MR being invalidated. Fix this by adding the mlx5 enumeration for fencing RDMA/atomic operations and fix the logic to apply this. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Andrey Grodzovsky authored
commit 02ef871e upstream. Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by:
Andrey Grodzovsky <andrey2805@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Oliver Hartkopp authored
commit 25e1ed6e upstream. For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2f ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by:
ajneu <ajneu1@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Naveen N. Rao authored
commit 844e3be4 upstream. Classic BPF JIT was never ported completely to work on little endian powerpc. However, it can be enabled and will crash the system when used. As such, disable use of BPF JIT on ppc64le. Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [bwh: Backported to 3.16: config symbol is BPF_JIT and also depends on PPC64] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Kirill A. Shutemov authored
commit 4ac1c17b upstream. During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Richard Weinberger authored
commit 1118dce7 upstream. Export these symbols such that UBIFS can implement ->migratepage. Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Richard Weinberger authored
commit 972228d8 upstream. recover_peb() was never power cut aware, if a power cut happened right after writing the VID header upon next attach UBI would blindly use the new partial written PEB and all data from the old PEB is lost. In order to make recover_peb() power cut aware, write the new VID with a proper crc and copy_flag set such that the UBI attach process will detect whether the new PEB is completely written or not. We cannot directly use ubi_eba_atomic_leb_change() since we'd have to unlock the LEB which is facing a write error. Reported-by:
Jörg Pfähler <pfaehler@isse.de> Reviewed-by:
Jörg Pfähler <pfaehler@isse.de> Signed-off-by:
Richard Weinberger <richard@nod.at> [bwh: Backported to 3.16: no need to unlock ubi->fm_eba_sem on error] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Kamal Heib authored
commit 93c098af upstream. Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Tony Lindgren authored
commit 0ac3c0a4 upstream. With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Reported-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Shaokun Zhang authored
commit 20c27a42 upstream. __sync_icache_dcache unconditionally skips the cache maintenance for anonymous pages, under the assumption that flushing is only required in the presence of D-side aliases [see 7249b79f ("arm64: Do not flush the D-cache for anonymous pages")]. Unfortunately, this breaks migration of anonymous pages holding self-modifying code, where userspace cannot be reasonably expected to reissue maintenance instructions in response to a migration. This patch fixes the problem by removing the broken page_mapping(page) check from the cache syncing code, otherwise we may end up fetching and executing stale instructions from the PoU. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Steven Rostedt (Red Hat) authored
commit 70c8217a upstream. If a task uses a non constant string for the format parameter in trace_printk(), then the trace_printk_fmt variable is set to NULL. This variable is then saved in the __trace_printk_fmt section. The function hold_module_trace_bprintk_format() checks to see if duplicate formats are used by modules, and reuses them if so (saves them to the list if it is new). But this function calls lookup_format() that does a strcmp() to the value (which is now NULL) and can cause a kernel oops. This wasn't an issue till 3debb0a9 ("tracing: Fix trace_printk() to print when not using bprintk()") which added "__used" to the trace_printk_fmt variable, and before that, the kernel simply optimized it out (no NULL value was saved). The fix is simply to handle the NULL pointer in lookup_format() and have the caller ignore the value if it was NULL. Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.comReported-by:
xingzhen <zhengjun.xing@intel.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Fixes: 3debb0a9 ("tracing: Fix trace_printk() to print when not using bprintk()") Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Wolfgang Grandegger authored
commit 43200a44 upstream. At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Tested-by:
Amr Bekhit <amrbekhit@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Thor Thayer authored
commit 427460c8 upstream. When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by:
Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Pali Rohár authored
commit 7613663c upstream. For security reasons ordinary user must not be able to control fan speed via /proc/i8k by default. Some malicious software running under "nobody" user could be able to turn fan off and cause HW problems. So this patch changes default value of "restricted" parameter to 1. Also restrict reading of DMI_PRODUCT_SERIAL from /proc/i8k via "restricted" parameter. It is because non root user cannot read DMI_PRODUCT_SERIAL from sysfs file /sys/class/dmi/id/product_serial. Old non secure behaviour of file /proc/i8k can be achieved by loading this module with "restricted" parameter set to 0. Note that this patch has effects only for kernels compiled with CONFIG_I8K and only for file /proc/i8k. Hwmon interface provided by this driver was not changed and root access for setting fan speed was needed also before. Reported-by:
Mario Limonciello <Mario_Limonciello@dell.com> Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
William Breathitt Gray authored
commit 32a5a0c0 upstream. The isa_bus_init function must be called before drivers which utilize the ISA bus driver are registered. A race condition for initilization exists if device_initcall is used (the isa_bus_init callback is placed in the same initcall level as dependent drivers which use module_init). This patch ensures that isa_bus_init is called first by utilizing postcore_initcall in favor of device_initcall. Fixes: a5117ba7 ("[PATCH] Driver model: add ISA bus") Cc: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Jason Gunthorpe authored
commit 8c5122e4 upstream. When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Fixes: fa417f7b ("IB/mlx4: Add support for IBoE") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Dan Carpenter authored
commit 38327424 upstream. If __key_link_begin() failed then "edit" would be uninitialized. I've added a check to fix that. This allows a random user to crash the kernel, though it's quite difficult to achieve. There are three ways it can be done as the user would have to cause an error to occur in __key_link(): (1) Cause the kernel to run out of memory. In practice, this is difficult to achieve without ENOMEM cropping up elsewhere and aborting the attempt. (2) Revoke the destination keyring between the keyring ID being looked up and it being tested for revocation. In practice, this is difficult to time correctly because the KEYCTL_REJECT function can only be used from the request-key upcall process. Further, users can only make use of what's in /sbin/request-key.conf, though this does including a rejection debugging test - which means that the destination keyring has to be the caller's session keyring in practice. (3) Have just enough key quota available to create a key, a new session keyring for the upcall and a link in the session keyring, but not then sufficient quota to create a link in the nominated destination keyring so that it fails with EDQUOT. The bug can be triggered using option (3) above using something like the following: echo 80 >/proc/sys/kernel/keys/root_maxbytes keyctl request2 user debug:fred negate @t The above sets the quota to something much lower (80) to make the bug easier to trigger, but this is dependent on the system. Note also that the name of the keyring created contains a random number that may be between 1 and 10 characters in size, so may throw the test off by changing the amount of quota used. Assuming the failure occurs, something like the following will be seen: kfree_debugcheck: out of range ptr 6b6b6b6b6b6b6b68h ------------[ cut here ]------------ kernel BUG at ../mm/slab.c:2821! ... RIP: 0010:[<ffffffff811600f9>] kfree_debugcheck+0x20/0x25 RSP: 0018:ffff8804014a7de8 EFLAGS: 00010092 RAX: 0000000000000034 RBX: 6b6b6b6b6b6b6b68 RCX: 0000000000000000 RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300 RBP: ffff8804014a7df0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8804014a7e68 R11: 0000000000000054 R12: 0000000000000202 R13: ffffffff81318a66 R14: 0000000000000000 R15: 0000000000000001 ... Call Trace: kfree+0xde/0x1bc assoc_array_cancel_edit+0x1f/0x36 __key_link_end+0x55/0x63 key_reject_and_link+0x124/0x155 keyctl_reject_key+0xb6/0xe0 keyctl_negate_key+0x10/0x12 SyS_keyctl+0x9f/0xe7 do_syscall_64+0x63/0x13a entry_SYSCALL64_slow_path+0x25/0x25 Fixes: f70e2e06 ('KEYS: Do preallocation for __key_link()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ocquidant, Sebastien authored
commit 8f50b8e5 upstream. In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY is overwritten by the WEEXTRADELAY value from the device tree and GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device tree. As a consequence, the memory accesses cannot be configured properly when the extra delay are needed for OE and WE. Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the device tree file and prevents GPMC_CONFIG4_OEXTRADELAY being overwritten by the WEXTRADELAY value from the device tree. Signed-off-by:
Ocquidant, Sebastien <sebastienocquidant@eaton.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Xiubo Li authored
commit caf1ff26 upstream. These days, we experienced one guest crash with 8 cores and 3 disks, with qemu error logs as bellow: qemu-system-x86_64: /build/qemu-2.0.0/kvm-all.c:984: kvm_irqchip_commit_routes: Assertion `ret == 0' failed. And then we found one patch(bdf026317d) in qemu tree, which said could fix this bug. Execute the following script will reproduce the BUG quickly: irq_affinity.sh ======================================================================== vda_irq_num=25 vdb_irq_num=27 while [ 1 ] do for irq in {1,2,4,8,10,20,40,80} do echo $irq > /proc/irq/$vda_irq_num/smp_affinity echo $irq > /proc/irq/$vdb_irq_num/smp_affinity dd if=/dev/vda of=/dev/zero bs=4K count=100 iflag=direct dd if=/dev/vdb of=/dev/zero bs=4K count=100 iflag=direct done done ======================================================================== The following qemu log is added in the qemu code and is displayed when this bug reproduced: kvm_irqchip_commit_routes: max gsi: 1008, nr_allocated_irq_routes: 1024, irq_routes->nr: 1024, gsi_count: 1024. That's to say when irq_routes->nr == 1024, there are 1024 routing entries, but in the kernel code when routes->nr >= 1024, will just return -EINVAL; The nr is the number of the routing entries which is in of [1 ~ KVM_MAX_IRQ_ROUTES], not the index in [0 ~ KVM_MAX_IRQ_ROUTES - 1]. This patch fix the BUG above. Signed-off-by:
Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by:
Wei Tang <tangwei@cmss.chinamobile.com> Signed-off-by:
Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Jiri Slaby authored
commit 7e1b1fc4 upstream. Modules which register drivers via standard path (driver_register) in parallel can cause a warning: WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/module/saa7146/drivers' Modules linked in: hexium_gemini(+) mxb(+) ... ... Call Trace: ... [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280 [<ffffffff815604c0>] driver_register+0x60/0xe0 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146] [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini] ... As can be (mostly) seen, driver_register causes this call sequence: -> bus_add_driver -> module_add_driver -> module_create_drivers_dir The last one creates "drivers" directory in /sys/module/<...>. When this is done in parallel, the directory is attempted to be created twice at the same time. This can be easily reproduced by loading mxb and hexium_gemini in parallel: while :; do modprobe mxb & modprobe hexium_gemini wait rmmod mxb hexium_gemini saa7146_vv saa7146 done saa7146 calls pci_register_driver for both mxb and hexium_gemini, which means /sys/module/saa7146/drivers is to be created for both of them. Fix this by a new mutex in module_create_drivers_dir which makes the test-and-create "drivers" dir atomic. I inverted the condition and removed 'return' to avoid multiple unlocks or a goto. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Fixes: fe480a26 (Modules: only add drivers/ direcory if needed) Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Lyude authored
commit 476490a9 upstream. Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Eric Dumazet authored
commit 6c0d54f1 upstream. When the qdisc is full, we drop a packet at the head of the queue, queue the current skb and return NET_XMIT_CN Now we track backlog on upper qdiscs, we need to call qdisc_tree_reduce_backlog(), even if the qlen did not change. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Eric Dumazet authored
commit 21de12ee upstream. If the packet was dropped by lower qdisc, then we must not access it later. Save qdisc_pkt_len(skb) in a temp variable. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: not using qdisc_qstats_drop()] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
WANG Cong authored
commit 2ccccf5f upstream. When the bottom qdisc decides to, for example, drop some packet, it calls qdisc_tree_decrease_qlen() to update the queue length for all its ancestors, we need to update the backlog too to keep the stats on root qdisc accurate. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-