- 25 Nov, 2019 2 commits
-
-
Quentin Monnet authored
When building bpftool, a warning was introduced by commit a9436460 ("bpftool: Allow to read btf as raw data"), because the return value from a call to 'read()' is ignored. Let's address it. Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191119111706.22440-1-quentin.monnet@netronome.com
-
Luc Van Oostenryck authored
xsk_poll() is defined as returning 'unsigned int' but the .poll method is declared as returning '__poll_t', a bitwise type. Fix this by using the proper return type and using the EPOLL constants instead of the POLL ones, as required for __poll_t. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20191120001042.30830-1-luc.vanoostenryck@gmail.com
-
- 24 Nov, 2019 20 commits
-
-
Eric Dumazet authored
A patch in net-next triggered a compile error on powerpc: include/linux/u64_stats_sync.h: In function 'u64_stats_read': include/asm-generic/local64.h:30:37: warning: passing argument 1 of 'local_read' discards 'const' qualifier from pointer target type This seems reasonable to relax powerpc local_read() requirements. Fixes: 316580b6 ("u64_stats: provide u64_stats_t type") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
kbuild test robot <lkp@intel.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build only Signed-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Updates. This patchset contains these main features: 1. Add the proper logic to support suspend/resume on the new 57500 chips. 2. Allow Phy configurations from user on a Multihost function if supported by fw. 3. devlink NVRAM flashing support. 4. Add a couple of chip IDs, PHY loopback enhancement, and provide more RSS contexts to VFs. v2: Dropped the devlink info patches to address some feedback and resubmit for the 5.6 kernel. ==================== Signed-off-by: -
Vasundhara Volam authored
Use the same bnxt_flash_package_from_file() function to support devlink flash operation. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Currently, the driver does not allow PHY settings on a multi-function or NPAR NIC whose port is shared by more than one function. Newer firmware now allows PHY settings on some of these NICs. Check for this new firmware setting and allow the user to set the PHY settings accordingly. Signed-off-by:
-
Michael Chan authored
If the link settings have been changed by another function sharing the port, firmware will send us an async. message. In response, we will call the new bnxt_init_ethtool_link_settings() function to update the current settings. Signed-off-by:
-
Michael Chan authored
Refactor this logic in bnxt_probe_phy() into a separate function bnxt_init_ethtool_link_settings(). It used to be that the settable link settings will never be changed without going through ethtool. So we only needed to do this once in bnxt_probe_phy(). Now, another function sharing the port may change it and we may need to re-initialize the ethtool settings again in run-time. Signed-off-by:
-
Michael Chan authored
New firmware allows PHY loopback to be set without disabling autoneg first. Check this capability and skip disabling autoneg when it is supported by firmware. Using this scheme, loopback will always work even if the PHY only supports autoneg. Signed-off-by:
-
Michael Chan authored
The driver currently only assignes 1 RSS context to each VF. This works for the Linux VF driver. But other drivers, such as DPDK, can make use of additional RSS contexts. Modify the code to divide up and assign RSS contexts to VFs just like other resources. Signed-off-by:
-
Michael Chan authored
Some chips that need host context memory as a backing store requires the memory to be initialized to a non-zero value. Query the value from firmware and initialize the context memory accordingly. Signed-off-by:
-
Vasundhara Volam authored
Driver calls HWRM_FUNC_RESET firmware call while resuming the device which clears the context memory backing store. Because of which allocating firmware resources would eventually fail. Fix it by freeing all context memory during suspend and reallocate the memory during resume. Call bnxt_hwrm_queue_qportcfg() in resume path. This firmware call is needed on the 57500 chips so that firmware will set up the proper queue mapping in relation to the context memory. Signed-off-by:
-
Vasundhara Volam authored
After driver unregister, firmware is erasing the information that driver supports new resource management. Send FUNC_RESOURCE_QCAPS command to inform the firmware that driver supports new resource management while resuming from hibernation. Otherwise, we fallback to the older resource allocation scheme. Also, move driver register after sending FUNC_RESOURCE_QCAPS command to be consistent with the normal initialization sequence. Signed-off-by:
-
Vasundhara Volam authored
Everytime driver registers with firmware, driver is required to register for async event notifications as well. These 2 calls are done using the same firmware command and can be combined. We are also missing the 2nd step to register for async events in the suspend/resume path and this will fix it. Prior to this, we were getting only default notifications. ULP can register for additional async events for the RDMA driver, so we add a parameter to the new function to only do step 2 when it is called from ULP. Signed-off-by:
-
Vasundhara Volam authored
In the bnxt_init_one() failure path, if the driver has already called firmware to register the driver, it is not undoing the driver registration. Add this missing step to unregister for correctness, so that the firmware knows that the driver has unloaded. Signed-off-by:
-
Michael Chan authored
Disable Bus master during suspend to prevent DMAs after the device goes into D3hot state. The new 57500 devices may continue to DMA from context memory after the system goes into D3hot state. This may cause some PCIe errors on some system. Re-enable it during resume. Signed-off-by:
-
Michael Chan authored
Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so that these chips will be properly classified as P4 chips to take advantage of the P4 fixes and features. Signed-off-by:
-
Jakub Kicinski authored
The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL. Ethtool stats which access those need to be as well. Reported-by:
-
Stephen Hemminger authored
The recording of RSS hash should be controlled by NETIF_F_RXHASH. Fixes: 1fac7ca4 ("hv_netvsc: record hardware hash in skb") Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Tonghao Zhang authored
Use vlan common api to access the vlan_tag info. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2019-11-22 1) Misc Cleanups 2) Software steering support for Geneve ==================== Signed-off-by: -
Russell King authored
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
- 23 Nov, 2019 18 commits
-
-
Taehee Yoo authored
rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2019-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.5 Last set of patches for v5.5. Major features here 802.11ax support for qtnfmac and airtime fairness support to mt76. And naturally smaller fixes and improvements all over. Major changes: qtnfmac * add 802.11ax support in AP mode * enable offload bridging support iwlwifi * support TX/RX antennas reporting mt76 * mt7615 smart carrier sense support * aggregation statistics via debugfs * airtime fairness (ATF) support * mt76x0 OF mac address support ==================== Signed-off-by:
-
Jakub Kicinski authored
Robert Schwebel says: ==================== here is v2 of the series converting the NFC documentation from txt to rst. Thanks to Jonathan and Dave for the input. Changes since (implicit) v1: * replace code-block by more compact :: syntax * really add the rst file to the index ==================== Signed-off-by: -
Robert Schwebel authored
Now that the sphinx syntax has been fixed, change the document from txt to rst and add it to the index. Signed-off-by:
Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by:
-
Robert Schwebel authored
Silence this warning: Documentation/networking/nfc.rst:113: WARNING: Definition list ends without a blank line; unexpected unindent. Signed-off-by:
-
Robert Schwebel authored
Fix this warning: Documentation/networking/nfc.rst:87: WARNING: Bullet list ends without a blank line; unexpected unindent. Signed-off-by:
-
Robert Schwebel authored
Change the block diagram to match the sphinx syntax. This will make it possible to switch this file to rst in the future. Signed-off-by:
-
Robert Schwebel authored
The headlines in this file do are not in the standard kernel docu- mentation headline format. Change it, so this file can be switched to rst in the future. Signed-off-by:
-
Russell King authored
When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by:
-
Russell King authored
There are no users of phy_ethtool_sset() in the kernel anymore, and as of commit 3c1bcc86 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"), the implementation is slightly buggy - it doesn't correctly check the masked advertising mask as it used to. Remove it, and update the phy documentation to refer to its replacement function. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jakub Kicinski authored
This commit reverts commit 91e6015b ("bpf: Emit audit messages upon successful prog load and unload") and its follow up commit 7599a896 ("audit: Move audit_log_task declaration under CONFIG_AUDITSYSCALL") as requested by Paul Moore. The change needs close review on linux-audit, tests etc. Signed-off-by:
-
Jakub Kicinski authored
Edward Cree says: ==================== A series of changes to how we check filters for expiry, manage how much of that work to do & when, etc. Prompted by some pathological behaviour under heavy load, which was Reported-by:
David Ahern <dahern@digitalocean.com> ==================== Signed-off-by:
-
Edward Cree authored
If there's no traffic on a channel, its ARFS expiry work will never get scheduled by efx_poll() as that isn't being run. So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Report the number of successful and failed insertions, and also the current count of filters, to aid in tuning e.g. rps_flow_cnt. Signed-off-by:
-
Edward Cree authored
In high connection count usage, the NIC's filter table may be filled with sufficiently many ARFS filters that further insertions fail. As this does not represent a correctness issue, do not log the resulting MCDI errors. Add a debug-level message under the (by default disabled) rx_status category instead; and take the opportunity to do a little extra expiry work. Since there are now multiple workitems able to call __efx_filter_rfs_expire on a given channel, it is possible for them to race and thus pass quotas which, combined, exceed rfs_filter_count. Thus, don't WARN_ON if we loop all the way around the table with quota left over. Signed-off-by:
-
Edward Cree authored
The old rfs_filters_added method for determining the quota could potentially allow the NIC to become filled with old filters, which never get tested for expiry. Instead, explicitly make expiry check work depend on the number of filters installed, and don't count checking slots without filters in as doing work. This guarantees that each filter will be checked for expiry at least once every thirty seconds (assuming the channel to which it belongs is NAPI polling actively) regardless of fill level. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueJakub Kicinski authored
Jeff Kirsher says: ==================== This series contains updates to the ice driver only. Bruce updates the driver to store the number of functions the device has so that it won't have to compute it when setting safe mode capabilities. Adds a check to adjust the reporting of capabilities for devices with more than 4 ports, which differ for devices with less than 4 ports. Brett adds a helper function to determine if the VF is allowed to do VLAN operations based on the host's VF configuration. Also adds a new function that initializes VLAN stripping (enabled/disabled) for the VF based on the device supported capabilities. Adds a check if the vector index is valid with the respect to the number of transmit and receive queues configured when we set coalesce settings for DCB. Adds a check if the promisc_mask contains ICE_PROMISC_VLAN_RX or ICE_PROMISC_VLAN_TX so that VLAN 0 promiscuous rules to be removed. Add a helper macro for a commonly used de-reference of a pointer to &pf->dev->pdev. Jesse fixes an issue where if an invalid virtchnl request from the VF, the driver would return uninitialized data to the VF from the PF stack, so ensure the stack variable is initialized earlier. Add helpers to the virtchnl interface make the reporting of strings consistent and help reduce stack space. Implements VF statistics gathering via the kernel ndo_get_vf_stats(). Akeem ensures we disable the state flag for each VF when its resources are returned to the device. Tony does additional cleanup in the driver to ensure the when we allocate and free memory within the same function, we should not be using devm_* variants; use regular alloc and free functions. Henry implements code to query and set the number of channels on the primary VSI for a PF via ethtool. Jake cleans up needless NULL checks in ice_sched_cleanup_all(). Kevin updates the firmware API version to align with current NVM images. v2: Added "Fixes:" tag to patch 5 commit description and added the use of netif_is_rxfh_configured() in patch 13 to see if RSS has been configured by the user, if so do not overwrite that configuration. ==================== Signed-off-by: -
Maciej Żenczykowski authored
Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
