- 27 Jul, 2011 40 commits
-
-
archit taneja authored
Move the inline functions rotate_90_or_270(), rotation_enabled(), and calc_rotation() from omap_vout.c to omap_voutdef.h. Move the independent functions omap_vout_alloc_buffer() and omap_vout_free_buffer() to omap_voutlib.c. Remove extern identifier from function definitions in omap_voutlib.h Add static identifier to functions that are used locally in omap_vout.c Signed-off-by:
Archit Taneja <archit@ti.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Amber Jain authored
Remove GFP_DMA from the __get_free_pages() call from omap24xxcam as ZONE_DMA is not configured on OMAP. Earlier the page allocator used to return a page from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled. As a result of commit a197b59a, page allocator returns null in such a scenario with a warning emitted to kernel log. Signed-off-by:
Amber Jain <amber@ti.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Amber Jain authored
Remove GFP_DMA from the __get_free_pages() call from omap_vout as ZONE_DMA is not configured on OMAP. Earlier the page allocator used to return a page from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled. As a result of commit a197b59a, page allocator returns null in such a scenario with a warning emitted to kernel log. Signed-off-by:
-
Kirill Smelkov authored
The camera there identifies itself as being manufactured by Cheng Uei Precision Industry Co., Ltd (Foxlink), and product is titled as "HP Webcam [2 MP Fixed]". I was trying to get 2 USB video capture devices to work simultaneously, and noticed that the above mentioned webcam always requires packet size = 3072 bytes per micro frame (~= 23.4 MB/s isoc bandwidth), which is far more than enough to get standard NTSC 640x480x2x30 = ~17.6 MB/s isoc bandwidth. As there are alt interfaces with smaller MxPS T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05c8 ProdID=0403 Rev= 1.06 S: Manufacturer=Foxlink S: Product=HP Webcam [2 MP Fixed] S: SerialNumber=200909240102 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1536 Ivl=125us I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2688 Ivl=125us I: If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us UVC_QUIRK_FIX_BANDWIDTH helps here and NTSC video can be served with MxPS=2688 i.e. 20.5 MB/s isoc bandwidth. In terms of microframe time allocation, before the quirk NTSC video required 60 usecs / microframe and 53 usecs / microframe after. Acked-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by:
-
Devin Heitmueller authored
The signal state field in G_TUNER is typically scaled from 0-100%. Since we don't know the signal level, we really would prefer the field to contain 100% than 1/256, which in many utilities (such as v4l2-ctl) rounds to 0% even when a signal is actually present. This patch makes the behavior consistent with other drivers. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Make use of the signal state registers to properly populate the signal lock registers in the cx231xx driver. This allows applications to know whether there is a signal present even in devices which lack a tuner (since such apps typically won't call G_TUNER if no tuner is present). [mchehab@redhat.com: Fix CodingStyle: don't use {} for one-line if's] Signed-off-by: -
Devin Heitmueller authored
On platforms that have CONFIG_HZ set to 100, the power ramp time effectively ends up being 10ms. However, on those that have a higher CONFIG_HZ, the time ends up *actually* being 5ms, which doesn't allow enough time for the hardware to be fully powered up before attempting to address it via i2c. Change the constant to 10ms, which is long enough for the hardware to power up, and won't really be anymore time than it was previously on platforms with CONFIG_HZ being 100. Credit goes to Mauro Carvalho Chehab and Gerd Hoffmann who previously investigated this issue. Tested with the Hauppauge USBLive 2, with which the problem was readily reproducible after setting CONFIG_HZ to 1000. Signed-off-by:
-
Devin Heitmueller authored
The following patch addresses the regression introduced in the cx231xx driver which stopped the Hauppauge USBLive2 from working. Confirmed working by both myself and the user who reported the issue on the KernelLabs blog (Robert DeLuca). At some point during refactoring of the cx231xx driver, the USBLive 2 device became broken. This patch results in the device working again. Thanks to Robert DeLuca for sponsoring this work. Signed-off-by:
-
Stephan Lachowsky authored
The search for matching extension units fails to take account of the current chain. In the case where you have two distinct video chains, both containing an XU with the same GUID but different unit ids, you will be unable to perform a mapping on the second chain because entity on the first chain will always be found first Fix this by only searching the current chain when performing a control mapping. This is analogous to the search used by uvc_find_control(), and is the correct behaviour. Signed-off-by:
Stephan Lachowsky <stephan.lachowsky@maxim-ic.com> Acked-by:
-
Sergei Shtylyov authored
The driver reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by:Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix the DRX-K logic that selects between DVB-C annex A and C Fix a typo where DVB-C annex type is set via setEnvParameters, but the driver, uses, instead, setParamParameters[2]. While here, cleans up the code, fixing a bad identation at the fallback code for other types of firmware, and put the multiple-line comments into the Linux CodingStyle. Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
After return, we don't need any other statement to change the function flux ;) Reported-by:
-
Mauro Carvalho Chehab authored
The error propagation changeset c23bf4402 broke the DVB-T code. The legacy way for propagate errors was: do { status = foo_func() if (status < 0) break; } while (0); return status; However, on a few places, it was doing: do { switch(foo) { case bar: status = foo_func() if (status < 0) break; break; } switch(foo2) { case bar: status = foo_func() if (status < 0) break; break; } ... } while (0); return (status) The inner error break were not working, as it were breaking only the switch, instead of the do. The solution used were to do a s/break/goto error/ at the inner breaks, but preserving the last break. Onfortunately, on a few switches, the replacement were applied also to the final break for the case statements. Fix the broken logic, by reverting them to break, where pertinent, in order to fix DVB-T support. Signed-off-by: -
Mauro Carvalho Chehab authored
Both ngene and ddbrige calls dvb_attach once for drxk_attach. The logic used there, and by tda18271c2dd driver is different from similar logic on other frontends. The right fix is to change them to use the same logic, but, while we don't do that, we need to patch em28xx-dvb in order to do cope with ngene/ddbridge magic. While here, document why drxk_t_release should do nothing. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This reverts commit a3e4adf274f86b2363fedaa964297cb38526cef0. As pointed by Andread Oberritter <obi@linuxtv.org>: That's wrong, because the array size is DTV_MAX_COMMAND + 1. Using the ARRAY_SIZE macro instead might reduce the confusion. Also, changeset 3995223038 already fixed this issue. Reported-by:
Andread Oberritter <obi@linuxtv.org> Signed-off-by:
-
istvan_v@mailbox.hu authored
The following patch adds a new control that makes it possible to set the luma notch filter type to finetune picture quality. Signed-off-by:
Istvan Varga <istvan_v@mailbox.hu> Signed-off-by:
-
istvan_v@mailbox.hu authored
This patch implements support for a sharpness control, using the luma peaking filter feature of cx2388x. [mchehab@redhat.com: use cx_andor instead of cx_write] Signed-off-by:
-
Tomasz Stanislawski authored
Add driver for TV Mixer on Samsung platforms from S5P family. Mixer is responsible for merging images from three layers and passing result to the output. Drivers are using: - v4l2 framework - videobuf2 - runtime PM Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Tomasz Stanislawski authored
Add drivers for Standard Definition output (SDO) on Samsung platforms from S5P family. The driver provides control over streaming analog TV via Composite connector. Driver is using: - v4l2 framework - runtime PM Signed-off-by:
-
Tomasz Stanislawski authored
Add drivers for HDMI outputs on Samsung platforms from S5P family. Drivers are using: - v4l2 framework - runtime PM Signed-off-by:
-
Tomasz Stanislawski authored
Callback is used to acquire current analog TV standard from a subdev. It is used to avoid keeping current standard in top-level driver. Signed-off-by:
-
Tomasz Stanislawski authored
Callback is used to acquire current digital video preset from a subdev. It is used to avoid keeping dv preset in top-level driver. Signed-off-by:
-
Tomasz Stanislawski authored
Callback is used to acquire TV norms supported by a subdev. It is used to avoid having standards in top-level driver. Signed-off-by:
-
Devin Heitmueller authored
The cx88 driver would force core->input to always be zero when doing the the request_acquire(). While it wasn't actually changing the input register in the hardware, the driver makes decision based on the current input. In particular, it decides whether to do things like enabling the comb filter when on a composite input but disabling it on s-video. So for example, on the HVR-1300, using the s-video input with the MPEG encoder would end up with the video decoder core configured as though the input type were composite. In short, the driver state did not match the hardware state. This patch does two things: 1. It forces the input to zero only if actually switching to DVB mode. This prevents the input from changing when the blackbird driver opens the device. 2. Keep track of what the input was set to when switching to DVB, and reset it back when done. This eliminates a condition where for example the user had the analog side of the board set to capture on the s-video input, then he used DVB for a bit, then the analog input would unexpectedly be set to the tuner input. This work was sponsored by Anevia S.A. Signed-off-by:
-
Kamil Debski authored
Multi Format Codec 5.1 is a hardware video coding acceleration module found in the S5PV210 and Exynos4 Samsung SoCs. It is capable of handling a range of video codecs and this driver provides a V4L2 interface for video decoding and encoding. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Jarod Wilson authored
This is admittedly a bit of a hack, but if we change our timeout value to something longer and fudge our synthesized trailing space sample based on the initial pulse sample, rc-core decode continues to work just fine with both rc-6 and rc-5, and now lirc userspace decode shows proper repeats for both of those protocols as well. Also tested NEC successfully with both decode options. We do still need a reset timer callback using the hardware's timeout value to make sure we actually process samples correctly, regardless of our somewhat hacky timeout and synthesized trailer above. This also adds a missing del_timer_sync call to the module unload path. CC: Chris Dodge <chris@redrat.co.uk> CC: Andrew Vincer <andrew.vincer@redrat.co.uk> CC: Stephen Cox <scox_nz@yahoo.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Trying to cap duration before multiplying it was obviously wrong. CC: Chris Dodge <chris@redrat.co.uk> CC: Andrew Vincer <andrew.vincer@redrat.co.uk> CC: Stephen Cox <scox_nz@yahoo.com> Signed-off-by:
-
Jarod Wilson authored
We already add a trailing space, this wasn't doing anything useful, and actually confused lirc userspace a bit. Rip it out. CC: Chris Dodge <chris@redrat.co.uk> CC: Andrew Vincer <andrew.vincer@redrat.co.uk> CC: Stephen Cox <scox_nz@yahoo.com> Signed-off-by:
-
Jarod Wilson authored
This is a custom IR protocol decoder, for the RC-6-ish protocol used by the Microsoft Remote Keyboard, apparently developed internally at Microsoft, and officially dubbed MCIR-2, per their March 2011 remote and transceiver requirements and specifications document, which also touches on this IR keyboard/mouse device. Its a standard keyboard with embedded thumb stick mouse pointer and mouse buttons, along with a number of media keys. The media keys are standard RC-6, identical to the signals from the stock MCE remotes, and will be handled as such. The keyboard and mouse signals will be decoded and delivered to the system by an input device registered specifically by this driver. Successfully tested with multiple mceusb-driven transceivers, as well as with fintek-cir and redrat3 hardware. Essentially, any raw IR hardware with enough sampling resolution should be able to use this decoder, nothing about it is at all receiver-hardware-specific. This work is inspired by lirc_mod_mce: The documentation there and code aided in understanding and decoding the protocol, but the bulk of the code is actually borrowed more from the existing in-kernel decoders than anything. I did recycle the keyboard keycode table, a few defines, and some of the keyboard and mouse data parsing bits from lirc_mod_mce though. Special thanks to James Meyer for providing the hardware, and being patient with me as I took forever to get around to writing this. callback routine to ensure we don't get any stuck keys, and used symbolic names for the keytable. Also cc'ing Florian this time, who I believe is the original mod-mce author... CC: Florian Demski <fdemski@users.sourceforge.net> Signed-off-by:
-
Emilio David Diaus Lopez authored
Signed-off-by:
Emilio David Diaus Lopez <reality_es@yahoo.es> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
It is useless. There is only one physical I2C-adapter. 2nd adapter was added originally due to some plans for allowing only one demod to access bus at time. But I never implemented proper locking... Signed-off-by:
-
Antti Palosaari authored
Remove old code which is not used anymore since IR code is read directly from memory nowadays. Signed-off-by:
-
Antti Palosaari authored
Return EOPNOTSUPP for too long messages. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Reported-by:
Jacek M. Holeczek <jacek.m.holeczek@gmail.com> Signed-off-by:
-
Juergen Lock authored
That's this tuner: The credit card sized remote more or less works if I set remote=4, so I added the hash to get it autodetected. (`more or less' there meaning sometimes buttons are `stuck on repeat', i.e. ir-keytable -t keeps repeating the same scancode until i press another button.) Signed-off-by:
Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by:
-
Jesper Juhl authored
In drivers/media/dvb/frontends/drxd_hard.c::load_firmware() I see 3 small issues: 1) When the 'fw' variable goes out of scope we'll leak the memory allocated to it by request_firmware() by neglecting to call release_firmware(). 2) After a successful request_firmware() we allocate fw->size bytes of memory using kzalloc() only to immediately overwrite all that memory with memcpy(), so asking for zeroed memory seems like wasted effort - just use kmalloc(). 3) In one of the error messages "no memory" lacks a space and is written as "nomemory". This patch fixes all 3 issues. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
