- 17 Mar, 2012 2 commits
-
-
Pablo Neira Ayuso authored
Kerin Millar reported hardlockups while running `conntrackd -c' in a busy firewall. That system (with several processors) was acting as backup in a primary-backup setup. After several tries, I found a race condition between the deletion operation of ctnetlink and timeout expiration. This patch fixes this problem. Tested-by: Kerin Millar <kerframil@gmail.com> Reported-by: Kerin Millar <kerframil@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
RongQing.Li authored
ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't need to dev_hold(). With dev_hold(), not corresponding dev_put(), will lead to leak. [ bug introduced in 96b52e61 (ipv6: mcast: RCU conversions) ] Signed-off-by: RongQing.Li <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2012 7 commits
-
-
Eric Dumazet authored
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Also increments tx_dropped counter Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375 (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
If the requested firmware is deemed corrupt and then released, reset the pointer to NULL in order to avoid double-freeing it in bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware(). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This reverts commit d47a0ac7 (sch_sfq: dont put new flow at the end of flows) As Jesper found out, patch sounded great but has bad side effects. In stress situation, pushing new flows in front of the queue can prevent old flows doing any progress. Packets can stay in SFQ queue for unlimited amount of time. It's possible to add heuristics to limit this problem, but this would add complexity outside of SFQ scope. A more sensible answer to Dave Taht concerns (who reported the issued I tried to solve in original commit) is probably to use a qdisc hierarchy so that high prio packets dont enter a potentially crowded SFQ qdisc. Reported-by: Jesper Dangaard Brouer <jdb@comx.dk> Cc: Dave Taht <dave.taht@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit 87a11578 ( ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().) forgot to convert one error path, leading to crashes in mld_sendpack() Many thanks to Dave Jones for providing a very complete bug report. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Mar, 2012 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: "Please pull to get this fix for the sparc32 build when using a more recent binutils." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: Add -Av8 to assembler command line.
-
David S. Miller authored
Newer version of binutils are more strict about specifying the correct options to enable certain classes of instructions. The sparc32 build is done for v7 in order to support sun4c systems which lack hardware integer multiply and divide instructions. So we have to pass -Av8 when building the assembler routines that use these instructions and get patched into the kernel when we find out that we have a v8 capable cpu. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "The most important bit here is the TCP syncookies issue, which seems to have been busted for some time. That fix has been verified in production by the reporter. 1) Persistent TUN devices erroneously hold on to the network namespace in such a way that it cannot be shutdown. Fix from Stanislav Kinsbursky with help from Eric Dumazet. 2) TCP SYN cookies have been broken for a while due to how the route lookup flow key is managed, connections can be delayed by as much as 20 seconds due to this bug. Fix from Eric Dumazet. 3) Missing jiffies.h include in lib/dynamic_queue_limits.c can break the build, from Tom Herbert. 4) Add USB device ID for Sitecom LN-031, from Joerg Neikes. 5) Fix OOPS in delayed workqueue in iwlegacy, from Stanislaw Gruszka. 6) rt2x00 TX queue can be disabled forever due to races, fix by synchronizing pause/unpause with a lock. Also from Stanislaw Gruszka. 7) Statistics and endian fix in bnx2x driver from Yuval Mintz, Eilon Greenstein, and Ariel Elior." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tun: don't hold network namespace by tun sockets bnx2x: FCoE statistics id fixed bnx2x: dcb bit indices flags used as bits bnx2x: added cpu_to_le16 when preparing ramrod's data bnx2x: pfc statistics counts pfc events twice rt2x00: fix random stalls iwl3945: fix possible il->txq NULL pointer dereference in delayed works dql: Fix undefined jiffies tcp: fix syncookie regression usb: asix: Patch for Sitecom LN-031
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile update from Chris Metcalf "These include a couple of queued-up minor bug fixes from the community, a fix to unbreak the sysfs hooks in tile, and syncing up the defconfigs." Ugh. defconfigs updates without "make minconfig". Tons of ugly pointless lines there, I suspect. * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: Use set_current_blocked() and block_sigmask() arch/tile: misplaced parens near likely arch/tile: sync up the defconfig files to the tip arch/tile: Fix up from commit 8a25a2fd
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf record: Fix buffer overrun bug in tracepoint_id_to_path() perf/x86: Fix local vs remote memory events for NHM/WSM
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: CIFS: Do not kmalloc under the flocks spinlock cifs: possible memory leak in xattr.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A bunch of assorted fixes; Jan's freezing stuff still _not_ in there and neither is mm fun ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: restore smp_mb() in unlock_new_inode() vfs: fix return value from do_last() vfs: fix double put after complete_walk() udf: Fix deadlock in udf_release_file() vfs: Correctly set the dir i_mutex lockdep class
-
- 13 Mar, 2012 12 commits
-
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Stephane Eranian authored
This patch fixes a buffer overrun bug in tracepoint_id_to_path(). The bug manisfested itself as a memory error reported by perf record. I ran into it with perf sched: $ perf sched rec noploop 2 noploop for 2 seconds [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 42.701 MB perf.data (~1865622 samples) ] Fatal: No memory to alloc tracepoints list It turned out that tracepoint_id_to_path() was reading the tracepoint id using read() but the buffer was not large enough to include the \n terminator for id with 4 digits or more. The patch fixes the problem by extending the buffer to a more reasonable size covering all possible id length include \n terminator. Note that atoll() stops at the first non digit character, thus it is not necessary to clear the buffer between each read. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: fweisbec@gmail.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/20120313155102.GA6465@quadSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platfrm driver fixes from Matthew Garrett: "Some trivial patches that fix wifi on some Lenovos and avoid a potential memory corruption issue on some Panasonics, plus two straightforward new drivers that touch no existing code." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add() acer-wmi: No wifi rfkill on Lenovo machines Fujitsu tablet extras driver x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptops
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pciLinus Torvalds authored
Pull PCI changes from Jesse Barnes: "A single fix for a regression that affects some people who try to disable ASPM for whatever reason." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh-sci / PM: Avoid deadlocking runtime PM sh: fix up the ubc clock definition for sh7785. sh: add parameter for RSPI in clock-sh7757 sh: Fix sh2a vbr table for more than 255 irqs
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SH/R-Mobile fixes from Paul Mundt. * tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: ap4evb: fixup fsi2_ak4643_info typo ARM: mach-shmobile: mackerel: Reserve DMA memory for the frame buffer ARM: mach-shmobile: Fix ag5evm compilation by including linux/videodev2.h ARM: mach-shmobile: Fix bonito compile breakage
-
Stanislav Kinsbursky authored
v3: added previously removed sock_put() to the tun_release() callback, because sk_release_kernel() doesn't drop the socket reference. v2: sk_release_kernel() used for socket release. Dummy tun_release() is required for sk_release_kernel() ---> sock_release() ---> sock->ops->release() call. TUN was designed to destroy it's socket on network namesapce shutdown. But this will never happen for persistent device, because it's socket holds network namespace. This patch removes of holding network namespace by TUN socket and replaces it by creating socket in init_net and then changing it's net it to desired one. On shutdown socket is moved back to init_net prior to final put. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
FCoE statistics ids were distinguished from the L2's statistics ids. However, not all of the change was committed. This causes a possible collision of indices when FCoE is present. This patch fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
DCB flags were updated using the flags' bit offsets instead of the actual bits. This is now fixed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ariel Elior authored
Fixed endianess issue when passing arguments to FW. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
When pfc statistics were counted, the delta change from last count was summed twice. This fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Mar, 2012 11 commits
-
-
Peter Zijlstra authored
Verified using the below proglet.. before: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,101,554 node-stores 2,096,931 node-store-misses 5.021546079 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 501,137 node-stores 199 node-store-misses 5.124451068 seconds time elapsed After: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,107,516 node-stores 2,097,187 node-store-misses 5.012755149 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 2,063,355 node-stores 165 node-store-misses 5.082091494 seconds time elapsed #define _GNU_SOURCE #include <sched.h> #include <stdio.h> #include <errno.h> #include <sys/mman.h> #include <sys/types.h> #include <dirent.h> #include <signal.h> #include <unistd.h> #include <numaif.h> #include <stdlib.h> #define SIZE (32*1024*1024) volatile int done; void sig_done(int sig) { done = 1; } int main(int argc, char **argv) { cpu_set_t *mask, *mask2; size_t size; int i, err, t; int nrcpus = 1024; char *mem; unsigned long nodemask = 0x01; /* node 0 */ DIR *node; struct dirent *de; int read = 0; int local = 0; if (argc < 2) { printf("usage: %s [0-3]\n", argv[0]); printf(" bit0 - local/remote\n"); printf(" bit1 - read/write\n"); exit(0); } switch (atoi(argv[1])) { case 0: printf("remote write\n"); break; case 1: printf("local write\n"); local = 1; break; case 2: printf("remote read\n"); read = 1; break; case 3: printf("local read\n"); local = 1; read = 1; break; } mask = CPU_ALLOC(nrcpus); size = CPU_ALLOC_SIZE(nrcpus); CPU_ZERO_S(size, mask); node = opendir("/sys/devices/system/node/node0/"); if (!node) perror("opendir"); while ((de = readdir(node))) { int cpu; if (sscanf(de->d_name, "cpu%d", &cpu) == 1) CPU_SET_S(cpu, size, mask); } closedir(node); mask2 = CPU_ALLOC(nrcpus); CPU_ZERO_S(size, mask2); for (i = 0; i < size; i++) CPU_SET_S(i, size, mask2); CPU_XOR_S(size, mask2, mask2, mask); // invert if (!local) mask = mask2; err = sched_setaffinity(0, size, mask); if (err) perror("sched_setaffinity"); mem = mmap(0, SIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE); if (err) perror("mbind"); signal(SIGALRM, sig_done); alarm(5); if (!read) { while (!done) { for (i = 0; i < SIZE; i++) mem[i] = 0x01; } } else { while (!done) { for (i = 0; i < SIZE; i++) t += *(volatile char *)(mem + i); } } return 0; } Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
roel authored
Parentheses were missing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
Chris Metcalf authored
This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
Chris Metcalf authored
This was Kay Siever's bombing to convert 'cpu' to a regular subsystem. The change left a bogus second argument to sysfs_create_file(). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
-
Stanislaw Gruszka authored
Is possible that we stop queue and then do not wake up it again, especially when packets are transmitted fast. That can be easily reproduced with modified tx queue entry_num to some small value e.g. 16. If mac80211 already hold local->queue_stop_reason_lock, then we can wait on that lock in both rt2x00queue_pause_queue() and rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock is possible that __ieee80211_wake_queue() will be performed before __ieee80211_stop_queue(), hence we stop queue and newer wake up it again. Another race condition is possible when between rt2x00queue_threshold() check and rt2x00queue_pause_queue() we will process all pending tx buffers on different cpu. This might happen if for example interrupt will be triggered on cpu performing rt2x00mac_tx(). To prevent race conditions serialize pause/unpause by queue->tx_lock. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
On il3945_down procedure we free tx queue data and nullify il->txq pointer. After that we drop mutex and then cancel delayed works. There is possibility, that after drooping mutex and before the cancel, some delayed work will start and crash while trying to send commands to the device. For example, here is reported crash in il3945_bg_reg_txpower_periodic(): https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10 Patch fix problem by adding il->txq check on works that send commands, hence utilize tx queue. Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Xi Wang authored
num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL on error. Then it could bypass the sanity check (num_sifr > 255). The subsequent call to kzalloc() would allocate a small buffer, leading to a memory corruption. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
We have several reports which says acer-wmi is loaded on ideapads and register rfkill for wifi which can not be unblocked. Since ideapad-laptop also register rfkill for wifi and it works reliably, it will be fine acer-wmi is not going to register rfkill for wifi once VPC2004 is found. Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no wifi rfkill capability, there are reports which says acer-wmi also block wireless on Thinkpad E520/E420. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Robert Gerlach authored
This patch adds support for some of the devices within a wide variety of Fujitsu Tablet Computers, both convertibles and slates. Primarily it allows for the automatic detection of the tablet/notebook mode for convertible tablet pc's, and orientation for docked slates. It also adds support for the application panel buttons usually found next to the tablet screen, and docking station detection for slates. Signed-off-by: Robert Gerlach <khnz@gmx.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Ben Hutchings authored
An rfkill driver based on the fsaa1655g and fsam7440 drivers for Fujitsu-Siemens Amilo A1655 and M7440 models found at: http://sourceforge.net/projects/fsaa1655g/ http://sourceforge.net/projects/fsam7440/ This adds DMI matching, replaces the procfs files with rfkill devices, and uses the proper functions to write to the i8042 safely. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Matthew Garrett <mjg@redhat.com>
-
Tom Herbert authored
In some configurations, jiffies may be undefined in lib/dynamic_queue_limits.c. Adding include of jiffies.h to avoid this. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Mar, 2012 1 commit
-
-
Eric Dumazet authored
commit ea4fc0d6 (ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit()) added a serious regression on synflood handling. Simon Kirby discovered a successful connection was delayed by 20 seconds before being responsive. In my tests, I discovered that xmit frames were lost, and needed ~4 retransmits and a socket dst rebuild before being really sent. In case of syncookie initiated connection, we use a different path to initialize the socket dst, and inet->cork.fl.u.ip4 is left cleared. As ip_queue_xmit() now depends on inet flow being setup, fix this by copying the temp flowi4 we use in cookie_v4_check(). Reported-by: Simon Kirby <sim@netnation.com> Bisected-by: Simon Kirby <sim@netnation.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-