- 19 Feb, 2020 2 commits
-
-
Jakub Sitnicki authored
There is no need to clear psock->sk_proto when restoring socket protocol callbacks in sk->sk_prot. The psock is about to get detached from the sock and eventually destroyed. At worst we will restore the protocol callbacks and the write callback twice. This makes reasoning about psock state easier. Once psock is initialized, we can count on psock->sk_proto always being set. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200217121530.754315-3-jakub@cloudflare.com
-
Jakub Sitnicki authored
We don't need a fallback for when the socket is not using ULP. tcp_update_ulp handles this case exactly the same as we do in sk_psock_restore_proto. Get rid of the duplicated code. Signed-off-by:
-
- 18 Feb, 2020 7 commits
-
-
Song Liu authored
bpf_perf_event_read_value() is NMI safe. Enable it for all BPF programs. This can be used in fentry/fexit to profile BPF program and individual kernel function with hardware counters. Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
YueHaibing authored
drivers/net/ethernet/amazon/ena/ena_com.c: In function ena_com_hash_key_allocate: drivers/net/ethernet/amazon/ena/ena_com.c:1070:50: warning: variable hash_key set but not used [-Wunused-but-set-variable] commit 6a4f7dc8 ("net: ena: rss: do not allocate key when not supported") introduced this, but not used, so remove it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: -
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:
-
- 17 Feb, 2020 31 commits
-
-
Russell King authored
Now that the phylib module loading issue has been resolved, we can allow this PHY driver to be built as a module. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: patches 2020-02-17 here are patches for SMC making termination tasks more perfect. ==================== Signed-off-by: -
Ursula Braun authored
IB event handlers schedule the port event worker for further processing of port state changes. This patch reduces the number of schedules to avoid duplicate processing of the same port change. Reviewed-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
smc_lgr_terminate() and smc_lgr_terminate_sched() both result in soft link termination, smc_lgr_terminate_sched() is scheduling a worker for this task. Take out complexity by always using the termination worker and getting rid of smc_lgr_terminate() completely. Signed-off-by:
-
Karsten Graul authored
The soft parameter of smc_lgr_terminate() is not used and obsolete. Remove it. Signed-off-by:
-
Karsten Graul authored
When 2 callers call smc_lgr_terminate() at the same time for the same lgr, one gets the lgr_lock and deletes the lgr from the list and releases the lock. Then the second caller gets the lock and tries to delete it again. In smc_lgr_terminate() add a check if the link group lgr is already deleted from the link group list and prevent to try to delete it a second time. And add a check if the lgr is marked as freeing, which means that a termination is already pending. Signed-off-by:
-
Karsten Graul authored
smc_tx_rdma_write() is called under the send_lock and should not call smc_lgr_terminate() directly. Call smc_lgr_terminate_sched() instead which schedules a worker. Signed-off-by:
-
Karsten Graul authored
smc_lgr_cleanup() is called during termination processing, there is no need to send a DELETE_LINK at that time. A DELETE_LINK should have been sent before the termination is initiated, if needed. And remove the extra call to wake_up(&lnk->wr_reg_wait) because smc_llc_link_inactive() already calls the related helper function smc_wr_wakeup_reg_wait(). Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Reduce dependency between bridge and router code This patch set reduces the dependency between the bridge and the router code in preparation for RTNL removal from the route insertion path in mlxsw. The motivation and solution are explained in detail in patch #3. The main idea is that we need to stop special-casing the VXLAN devices with regards to the reference counting of the FIDs. Otherwise, we can bump into the situation described in patch #3, where the routing code calls into the bridge code which calls back into the routing code. After adding a mutex to protect router data structures to remove RTNL dependency, this can result in an AA deadlock. Patches #1 and #2 are preparations. They convert the FIDs to use 'refcount_t' for reference counting in order to catch over/under flows and add extack to the bridge creation function. Patches #3-#5 reduce the dependency between the bridge and the router code. First, by having the VXLAN device take a reference on the FID in patch #3 and then by removing unnecessary code following the change in patch #3. Patches #6-#10 adjust existing selftests and add new ones to exercise the new code paths. ==================== Signed-off-by: -
Ido Schimmel authored
Test that when two VXLAN tunnels with conflicting configurations (i.e., different TTL) are enslaved to the same VLAN-aware bridge, then the enslavement of a port to the bridge is denied. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
After recent changes, the VXLAN tunnel will be offloaded regardless if any local ports are member in the FID or not. Adjust the test to make sure the tunnel is offloaded in this case. Signed-off-by:
-
Ido Schimmel authored
The driver supports a single VLAN-aware bridge. Test that the enslavement of a port to the second VLAN-aware bridge fails with an extack. Signed-off-by:
-
Ido Schimmel authored
Test that creation of a bridge (both VLAN-aware and VLAN-unaware) fails with an extack when a VXLAN device with an unsupported configuration is already enslaved to it. Signed-off-by:
-
Ido Schimmel authored
The addition of a VLAN on a bridge slave prompts the driver to have the local port in question join the FID corresponding to this VLAN. Before recent changes, the operation of joining the FID would also mean that the driver would enable VXLAN tunneling if a VXLAN device was also member in the VLAN. In case the configuration of the VXLAN tunnel was not supported, an extack error would be returned. Since the operation of joining the FID no longer means that VXLAN tunneling is potentially enabled, the test is no longer relevant. Remove it. Signed-off-by:
-
Ido Schimmel authored
Commit f40be47a ("mlxsw: spectrum_router: Do not force specific configuration order") added a call from the routing code to the bridge code in order to handle the case where VNI should be set on a FID following the joining of the router port to the FID. This is no longer required, as previous patches made VXLAN devices explicitly take a reference on the FID and set VNI on it. Therefore, remove the unnecessary call and simply have the RIF take a reference on the FID without checking if VNI should also be set on it. Signed-off-by:
-
Ido Schimmel authored
As explained in previous patch, VXLAN devices now take a reference on the FID and not only local ports. Therefore, there is no need for local ports to check if they need to set a VNI on the FID when they join the FID. Remove these unnecessary checks. Signed-off-by:
-
Ido Schimmel authored
Up until now only local ports and the router port (which is also a local port) took a reference on the corresponding FID (Filtering Identifier) when joining a bridge. For example: 192.0.2.1/24 br0 | +------+------+ | | swp1 vxlan0 In this case the reference count of the FID will be '2'. Since the VXLAN device does not take a reference on the FID, whenever a local port joins the bridge it needs to check if a VXLAN device is already enslaved. If the VXLAN device should be mapped to the FID in question, then the VXLAN device's VNI is set on the FID. Beside the fact that this scheme special-cases the VXLAN device, it also creates an unnecessary dependency between the routing and bridge code: 1. [R] IP address is added on 'br0', which prompts the creation of a RIF and a backing FID 2. [B] VNI is enabled on backing FID 3. [R] Host route corresponding to VXLAN device's source address is promoted to perform NVE decapsulation [R] - Routing code [B] - Bridge code This back and forth dependency will become problematic when a lock is added in the routing code instead of relying on RTNL, as it will result in an AA deadlock. Instead, have the VXLAN device take a reference on the FID just like all the other netdev members of the bridge. In order to correctly handle the case where VXLAN devices are already enslaved to the bridge when it is offloaded, walk the bridge's slaves and replay the configuration. Signed-off-by:Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Propagate extack to bridge creation function so that error messages could be passed to user space via netlink instead of printing them to kernel log. A subsequent patch will pass the new extack argument to more functions. Signed-off-by:
-
Ido Schimmel authored
'refcount_t' is very useful for catching over/under flows. Convert the FID (Filtering Identifier) objects to use it instead of 'unsigned int' for their reference count. A subsequent patch in the series will change the way VXLAN devices hold / release the FID reference, which is why the conversion is made now. Signed-off-by:
-
Julian Wiedmann authored
This enables ndo_dflt_bridge_getlink() to report a bridge port's offload settings for multicast and broadcast flooding. CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== couple more ARFS tidy-ups Tie up some loose ends from the recent ARFS work. ==================== Signed-off-by: -
Edward Cree authored
efx_filter_rfs_expire() is a work-function, so it being inline makes no sense. It's only ever used in efx_channels.c, so move it there. While we're at it, clean out some related unused cruft. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Prevent excessive CPU time spent running a workitem with nothing to do. We avoid any races by keeping the same check in efx_filter_rfs_expire(). Suggested-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Julian Wiedmann authored
When a real dev unregisters, vlan_device_event() also unregisters all of its vlan interfaces. For each VID this ends up in __vlan_vid_del(), which attempts to remove the VID from the real dev's VLAN filter. But the unregistering real dev might no longer be able to issue the required IOs, and return an error. Subsequently we raise a noisy warning msg that is not appropriate for this situation: the real dev is being torn down anyway, there shouldn't be any worry about cleanly releasing all of its HW-internal resources. So to avoid scaring innocent users, suppress this warning when the failed deletion happens on an unregistering device. While at it also convert the raw pr_warn() to a more fitting netdev_warn(). Signed-off-by:
-
Andy Shevchenko authored
Since PCI core provides a generic PCI_DEVICE_DATA() macro, replace STMMAC_DEVICE() with former one. No functional change intended. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
David S. Miller authored
Vlad Buslov says: ==================== Remove rtnl lock dependency from flow_action infra Currently, TC flow_action infrastructure code obtain rtnl lock before accessing action state in tc_setup_flow_action() function and releases it afterwards. This behavior is not supposed to impact TC filter insertion rate because filling flow_action representation is only a small part of creating new filter and expensive operations (hardware offload callbacks, classifiers, cls API code that creates chains and classifiers instances) already support unlocked execution. However, typical vswitch implementation might need to also dump TC filters concurrently, for example to age out unused flows or update flow counters. TC dump is fully serialized and holds rtnl lock during its whole execution in kernel space. As such, it can significantly impact concurrent tasks that try to intermittently obtain rtnl lock when filling intermediate representation for new filter offload (performance evaluation at the end of this mail). Refactor flow_action cls API infrastructure and its dependencies to not rely on rtnl lock for synchronization. Patch set overview: - Refactor tc_setup_flow_action() to obtain action tcf_lock when accessing action state. Fix its dependencies to not obtain tcf_lock themselves and assume that caller already holds it (needs to be done in same patch to prevent deadlock) and not to call sleeping functions (needs to be done in same patch to prevent "sleeping while atomic" dmesg warnings). - Refactor action helper functions to require tcf_lock instead of rtnl. Internally, all of the actions already use tcf_lock for synchronization to accommodate unlocked classifier API, so this change relies on already existing functionality. - Remove rtnl lock and "rtnl_held" argument from tc_setup_flow_action() function. To test the change, multiple concurrent TC instances are invoked with following command: time ls add* | xargs -n 1 -P 100 sudo tc -b Ten batch files with following typical rules (100k each) are used: filter add dev ens1f0_0 protocol ip ingress prio 1 handle 1 flower src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 src_ip 192.168.111.1 dst_ip 192.168.111.2 ip_proto udp dst_port 1 src_port 1 action tunnel_key set id 1 src_ip 2.2.2.2 dst_ip 2.2.2.3 dst_port 4789 no_percpu action mirred egress redirect dev vxlan1 no_percpu TC dump of same device is called in infinite loop from five concurrent instances: while true do tc -s filter show dev $NIC ingress >/dev/null done Results obtained on current net-next commit 9f68e365 ("Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm"): | net-next | this change ---------------+----------+------------- TC add | 6.3s | 6.3s TC add + dump | 29.3s | 6.8s Test results confirm significant impact of concurrent TC dump. The impact is almost fully mitigated by proposed change (differences can be attributed to contention for chain and tp locks between add and dump TC instances). ==================== Signed-off-by:
-
Vlad Buslov authored
Refactor tc_setup_flow_action() function not to use rtnl lock and remove 'rtnl_held' argument that is no longer needed. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
-
Vlad Buslov authored
In order to remove rtnl lock dependency from flow_action representation translator, change rtnl_dereference() to rcu_dereference_protected() in ct action helpers that provide external access to zone and action values. This is safe to do because the functions are not called from anywhere else outside flow_action infrastructure which was modified to obtain tcf_lock when accessing action data in one of previous patches in the series. Signed-off-by:
-
Vlad Buslov authored
In order to remove rtnl lock dependency from flow_action representation translator, change rcu_dereference_bh_rtnl() to rcu_dereference_protected() in police action helpers that provide external access to rate and burst values. This is safe to do because the functions are not called from anywhere else outside flow_action infrastructure which was modified to obtain tcf_lock when accessing action data in one of previous patches in the series. Signed-off-by:
-
Vlad Buslov authored
In order to remove dependency on rtnl lock, take action's tcfa_lock when constructing its representation as flow_action_entry structure. Refactor tcf_sample_get_group() to assume that caller holds tcf_lock and don't take it manually. This callback is only called from flow_action infra representation translator which now calls it with tcf_lock held, so this refactoring is necessary to prevent deadlock. Allocate memory with GFP_ATOMIC flag for ip_tunnel_info copy because tcf_tunnel_info_copy() is only called from flow_action representation infra code with tcf_lock spinlock taken. Signed-off-by:
-
David S. Miller authored
Lorenzo Bianconi says: ==================== add xdp ethtool stats to mvneta driver Rework mvneta stats accounting in order to introduce xdp ethtool statistics in the mvneta driver. Introduce xdp_redirect, xdp_pass, xdp_drop and xdp_tx counters to ethtool statistics. Fix skb_alloc_error and refill_error ethtool accounting ==================== Signed-off-by:
-
