- 03 Jul, 2012 3 commits
-
-
Johannes Berg authored
Some drivers require setup before being able to send management frames in managed mode, in particular in multi-channel cases. Introduce API to allow the drivers to do such setup while being able to sleep waiting for the setup to finish in the device. This isn't possible inside the TX call since that can't sleep. A future patch may also restructure the TX retry to wait for the driver to report the frame status, as suggested by Arik in http://mid.gmane.org/CA+XVXffKSEL6ZQPQ98x-zO-NL2=TNF1uN==mprRyUmAaRn254g@mail.gmail.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
Due to the recent change of NUM_BANDS from 2 to 3 hwsim broke. Fix the code by using the right constant but don't support bands other than 2.4 and 5 GHz. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Thomas Huehn authored
IEEE80211_TX_MAX_RATES can be reduced from 5 to 4 as there is no current hardware supporting a rate chain with 5 multi rate stages (mrr), so 4 mrr stages are sufficient. The memory that is freed within the ieee80211_tx_info struct will be used in the upcoming Transmission Power Control (TPC) implementation. Suggested-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Thomas Huehn <thomas@net.t-labs.tu-berlin.de> [reword commit message] Signed-off-by:
-
- 02 Jul, 2012 6 commits
-
-
Johannes Berg authored
The implementation of tx_frags is buggy due to not handling queue stop, and there's no driver implementing it so remove it. Signed-off-by: -
Mahesh Palivela authored
Insert the VHT capability IE into probe requests. Signed-off-by:
Mahesh Palivela <maheshp@posedge.com> Signed-off-by:
-
Vladimir Kondratiev authored
Provide various constants as defined by the 802.11ad: frame types, IE's, capability bits, action categories Introduce GCMP cipher, mandatory by 802.11ad Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
-
Vladimir Kondratiev authored
Add regulatory rule for the 60g band Signed-off-by:
-
Vladimir Kondratiev authored
Add enumerations for both cfg80211 and nl80211. This expands wiphy.bands etc. arrays. Extend channel <-> frequency translation to cover 60g band and modify the rate check logic since there are no legacy mandatory rates (only MCS is used.) Signed-off-by:
-
Eliad Peller authored
Drivers might need getting the probe request (e.g. in order to extract the ssid) even during auth/assoc. Make ieee80211_ap_probereq_get() support it by considering auth_data/assoc_data as well. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
- 29 Jun, 2012 13 commits
-
-
Michal Kazior authored
devlist_mtx locking is changed to accomodate changes. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Michal Kazior authored
.connect cannot be handled since the driver scans and connects on its own. It is up to the driver then to refuse a connection (with -EBUSY for example). Non-fixed channel IBSSes always take a single channel resource. For example two non-fixed channel IBSSes always take up 2 num_different_channels, even if they operate on the same channel at a given point of time. Signed-off-by:
-
Michal Kazior authored
We do not need it anymore since cfg80211 tracks monitor channel and monitor channel type. Signed-off-by:
-
Michal Kazior authored
Implements behaviour seen in mac80211. A running monitor always has a channel - even before .set_channel. This way we won't break current behaviour. Signed-off-by:
-
Michal Kazior authored
Make it even more obvious we support single monitor channel. This will allow us to remove .get_channel. Signed-off-by:
-
Michal Kazior authored
Having .set_monitor_channel work with non-monitor interfaces running would make interface combinations accounting ambiguous. Signed-off-by:
-
Michal Kazior authored
Use cfg80211 the new .set_monitor_enabled instead of tracking it inside mac80211. Signed-off-by:
-
Michal Kazior authored
Implements .set_monitor_enabled(wiphy, enabled). Notifies driver upon change of interface layout. If only monitor interfaces become present it is called with 2nd argument being true. If non-monitor interface appears then 2nd argument is false. Driver is notified only upon change. This makes it more obvious about the fact that cfg80211 supports single monitor channel. Once we implement multi-channel we don't want to allow setting monitor channel while other interface types are running. Otherwise it would be ambiguous once we start considering num_different_channels. Signed-off-by:
-
Michal Kazior authored
Helper function for finding out which channel is used by a given interface. An exclusive channel can be used only by a single interface. This is mainly for non-fixed channel IBSS handling. Signed-off-by:
-
Michal Kazior authored
IBSS may hop between channels. It is necessary to account this special case when considering interface combinations. Signed-off-by:
-
Michal Kazior authored
We need to know which channel is used by a running AP and mesh for channel context accounting and finding matching/active interface combination. STA/IBSS have current_bss already which allows us to check which channel a vif is tuned to. Non-fixed channel IBSS can be handled with additional changes. Monitor mode is going to be handled differently. Signed-off-by:
-
Michal Kazior authored
We'll need this for proper channel tracking (which is going to be needed for channel context accounting and finding matching/active interface combination). Signed-off-by:
-
Michal Kazior authored
This functionality will be reused when interface is going down. Avoids code duplication. Also adds missing wdev locking. Signed-off-by:
-
- 28 Jun, 2012 6 commits
-
-
Johannes Berg authored
-
Mahesh Palivela authored
Allow drivers to advertise their VHT capabilities and export them to userspace via nl80211. Signed-off-by:
-
Mahesh Palivela authored
Add the VHT definitions to be used by drivers supporting it. Signed-off-by:
-
Eliad Peller authored
beacon_ies is needed only in order to extract the dtim period. However, even if it's missing we can still enter ps with dtim=1 (which also happens if the TIM ie is invalid). Most drivers don't use conf.max_sleep_period/ps_dtim_period anyway, and this check prevents them from entering ps if they don't have beacon (but only probe response), even though the beacon is not needed at all. Signed-off-by:
-
Eliad Peller authored
On deauth/disassoc we tear down all BA sessions. These DELBA packets are sent on the appropriate TID, while deauth/disassoc is always sent on VO. This sometimes ends with the DELBA being sent after the deauth was already sent. Fix it by flushing all the pending frames before sending deauth/disassoc. Signed-off-by:
-
Johannes Berg authored
This and ieee80211_add_ext_srates_ie() aren't exported, so can't be used by drivers anyway, but there's also no reason that they should be so make them private to mac80211 and use sdata instead of vif arguments. Acked-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
- 27 Jun, 2012 10 commits
-
-
Sujith Manoharan authored
Wrap the MCI-work canceling with CONFIG_ATH9K_BTCOEX_SUPPORT. Reported-by:
Emmanuel Benisty <benisty.e@gmail.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Arend van Spriel authored
The commit "brcmfmac: introduce checkdied debugfs functionality" also introduced a sparse warning: ..../brcmfmac/dhd_sdio.c:3147:45: sparse: cast to restricted __le32 This patch fixes this sparse warning. Reported-by:
Fengguang Wu <wfg@linux.intel.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Franky Lin authored
BCM4334 is a dualband a/b/g/n WiFi chip support 20MHz/40MHz channels. This patch adds support for its SDIO interface. Reviewed-by:
-
Arend van Spriel authored
The nvram data is preprocessed before being sent to the device and just before sending an additional allocation was done that assured word alignment of the data. This has moved to the preprocessing step to reduce allocations and subsequent copying of the nvram data. Reviewed-by:
-
Franky Lin authored
The nvram file could be parsed directly in the data buffer in the firmware structure passed by request_firmware function. This patch gets rid of the redundant memcpy. Reviewed-by:
-
Franky Lin authored
txglomming alignment is a SDIO bus specific feature. It is more appropriate to place it in SDIO bus layer instead of common layer. Reviewed-by:
-
Franky Lin authored
txglomming is a firmware feature for sdio bus interface. For SDIO device cores newer than revision 11, the default setting of firmware should be used instead of disabling it from the host side. Reviewed-by:
-
Franky Lin authored
brcmfmac need to support data command setting for dongle's bus core. A list must be placed at brcmf_bus structure before calling brcmf_bus_start in order to be sent by brcmf_c_preinit_dcmds. Reviewed-by:
-
Rafał Miłecki authored
Some of them are BCM4706 specific AFAWK. Most of them was confirmed on Netgear WNDR450. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Johannes Berg authored
When CONFIG_PM is disabled, no device can possibly support WoWLAN since it can't go to sleep to start with. Due to this, mac80211 had even rejected the hardware registration. By making all the code and data for WoWLAN depend on CONFIG_PM we can promote this runtime error to a compile-time error. Add #ifdef around all WoWLAN code to remove it in systems that don't need it as they never suspend. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Acked-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
-
- 26 Jun, 2012 2 commits
-
-
Luciano Coelho authored
-
Sujith Manoharan authored
Remove the radio enable/disable stuff and fix the transition to FULL_SLEEP mode when the device is idle. Signed-off-by:
-
