- 12 Apr, 2017 12 commits
-
-
Marc Zyngier authored
commit 72f31048 upstream. We don't hold the mmap_sem while searching for VMAs (via find_vma), in kvm_arch_prepare_memory_region, which can end up in expected failures. Fixes: commit 8eef9123 ("arm/arm64: KVM: map MMIO regions at creation time") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Eric Auger <eric.auger@rehat.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> [ Handle dirty page logging failure case ] Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
commit 90f6e150 upstream. We don't hold the mmap_sem while searching for the VMAs when we try to unmap each memslot for a VM. Fix this properly to avoid unexpected results. Fixes: commit 957db105 ("arm/arm64: KVM: Introduce stage2_unmap_vm") Reviewed-by:
-
Shuxiao Zhang authored
commit 97fbfef6 upstream. vfs_llseek will check whether the file mode has FMODE_LSEEK, no return failure. But ashmem can be lseek, so add FMODE_LSEEK to ashmem file. Comment From Greg Hackmann: ashmem_llseek() passes the llseek() call through to the backing shmem file. 91360b02 ("ashmem: use vfs_llseek()") changed this from directly calling the file's llseek() op into a VFS layer call. This also adds a check for the FMODE_LSEEK bit, so without that bit ashmem_llseek() now always fails with -ESPIPE. Fixes: 91360b02 ("ashmem: use vfs_llseek()") Signed-off-by:
Shuxiao Zhang <zhangshuxiao@xiaomi.com> Tested-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
NeilBrown authored
commit c8a139d0 upstream. ops->show() can return a negative error code. Commit 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") (in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors would look like large numbers. As a result, if an error is returned, sysfs_kf_read() will return the value of 'count', typically 4096. Commit 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") (in v4.8) extended this error to use the unsigned large 'len' as a size for memmove(). Consequently, if ->show returns an error, then the first read() on the sysfs file will return 4096 and could return uninitialized memory to user-space. If the application performs a subsequent read, this will trigger a memmove() with extremely large count, and is likely to crash the machine is bizarre ways. This bug can currently only be triggered by reading from an md sysfs attribute declared with __ATTR_PREALLOC() during the brief period between when mddev_put() deletes an mddev from the ->all_mddevs list, and when mddev_delayed_delete() - which is scheduled on a workqueue - completes. Before this, an error won't be returned by the ->show() After this, the ->show() won't be called. I can reproduce it reliably only by putting delay like usleep_range(500000,700000); early in mddev_delayed_delete(). Then after creating an md device md0 run echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state The bug can be triggered without the usleep. Fixes: 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") Fixes: 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
-
Li Qiang authored
commit e7e11f99 upstream. In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Signed-off-by:
Li Qiang <liqiang6-s@360.cn> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 53e16798 upstream. The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit fe25deb7 upstream. Previously, when a surface was opened using a legacy (non prime) handle, it was verified to have been created by a client in the same master realm. Relax this so that opening is also allowed recursively if the client already has the surface open. This works around a regression in svga mesa where opening of a shared surface is used recursively to obtain surface information. Signed-off-by:
-
Murray McAllister authored
commit 63774069 upstream. In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Signed-off-by:
Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by:
-
Murray McAllister authored
commit 36274ab8 upstream. Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Signed-off-by:
-
Thomas Hellstrom authored
commit f7652afa upstream. A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Signed-off-by:
-
Sudip Mukherjee authored
commit 9a69645d upstream. Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a big warning like: "sysfs: cannot create duplicate filename '/devices/parport0/ppdev0.0'". And with that many parallel port printers stopped working. We have been using the minor number as the id field while registering a parralel port device with a parralel port. But when there are multiple parrallel port device for one single parallel port, they all tried to register with the same name like 'pardev0.0' and everything started failing. Use an incremented index as the id instead of the minor number. Fixes: 8b7d3a9d ("ppdev: use new parport device model") Cc: stable <stable@vger.kernel.org> # v4.9+ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322Tested-by:
James Feeney <james@nurealm.net> Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Sudip Mukherjee authored
commit dd5c472a upstream. After parport starts using the device model, all pardevice drivers should decide in their match_port callback function if they want to attach with that particulatr port. ppdev has been converted to use the new parport device-model code but pp_attach() tried to attach with all the ports. Create a new array of pointer and use that to remember the ports we have attached. And use that information to skip attaching ports which we have already attached. Tested-by:
Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by:
-
- 08 Apr, 2017 28 commits
-
-
Greg Kroah-Hartman authored
-
Keith Busch authored
commit 6db28eda upstream. If the device is not present, the driver should disable the queues immediately. Prior to this, the driver was relying on the watchdog timer to kill the queues if requests were outstanding to the device, and that just delays removal up to one second. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Keith Busch authored
commit f33447b9 upstream. If a namespace has already been marked dead, we don't want to kick the request_queue again since we may have just freed it from another thread. Signed-off-by:
-
Jason A. Donenfeld authored
commit de5540d0 upstream. Under extremely heavy uses of padata, crashes occur, and with list debugging turned on, this happens instead: [87487.298728] WARNING: CPU: 1 PID: 882 at lib/list_debug.c:33 __list_add+0xae/0x130 [87487.301868] list_add corruption. prev->next should be next (ffffb17abfc043d0), but was ffff8dba70872c80. (prev=ffff8dba70872b00). [87487.339011] [<ffffffff9a53d075>] dump_stack+0x68/0xa3 [87487.342198] [<ffffffff99e119a1>] ? console_unlock+0x281/0x6d0 [87487.345364] [<ffffffff99d6b91f>] __warn+0xff/0x140 [87487.348513] [<ffffffff99d6b9aa>] warn_slowpath_fmt+0x4a/0x50 [87487.351659] [<ffffffff9a58b5de>] __list_add+0xae/0x130 [87487.354772] [<ffffffff9add5094>] ? _raw_spin_lock+0x64/0x70 [87487.357915] [<ffffffff99eefd66>] padata_reorder+0x1e6/0x420 [87487.361084] [<ffffffff99ef0055>] padata_do_serial+0xa5/0x120 padata_reorder calls list_add_tail with the list to which its adding locked, which seems correct: spin_lock(&squeue->serial.lock); list_add_tail(&padata->list, &squeue->serial.list); spin_unlock(&squeue->serial.lock); This therefore leaves only place where such inconsistency could occur: if padata->list is added at the same time on two different threads. This pdata pointer comes from the function call to padata_get_next(pd), which has in it the following block: next_queue = per_cpu_ptr(pd->pqueue, cpu); padata = NULL; reorder = &next_queue->reorder; if (!list_empty(&reorder->list)) { padata = list_entry(reorder->list.next, struct padata_priv, list); spin_lock(&reorder->lock); list_del_init(&padata->list); atomic_dec(&pd->reorder_objects); spin_unlock(&reorder->lock); pd->processed++; goto out; } out: return padata; I strongly suspect that the problem here is that two threads can race on reorder list. Even though the deletion is locked, call to list_entry is not locked, which means it's feasible that two threads pick up the same padata object and subsequently call list_add_tail on them at the same time. The fix is thus be hoist that lock outside of that block. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
NeilBrown authored
commit f5fe1b51 upstream. Commit 79bd9959 ("blk: improve order of bio handling in generic_make_request()") changed current->bio_list so that it did not contain *all* of the queued bios, but only those submitted by the currently running make_request_fn. There are two places which walk the list and requeue selected bios, and others that check if the list is empty. These are no longer correct. So redefine current->bio_list to point to an array of two lists, which contain all queued bios, and adjust various code to test or walk both lists. Signed-off-by:
-
NeilBrown authored
commit 79bd9959 upstream. To avoid recursion on the kernel stack when stacked block devices are in use, generic_make_request() will, when called recursively, queue new requests for later handling. They will be handled when the make_request_fn for the current bio completes. If any bios are submitted by a make_request_fn, these will ultimately be handled seqeuntially. If the handling of one of those generates further requests, they will be added to the end of the queue. This strict first-in-first-out behaviour can lead to deadlocks in various ways, normally because a request might need to wait for a previous request to the same device to complete. This can happen when they share a mempool, and can happen due to interdependencies particular to the device. Both md and dm have examples where this happens. These deadlocks can be erradicated by more selective ordering of bios. Specifically by handling them in depth-first order. That is: when the handling of one bio generates one or more further bios, they are handled immediately after the parent, before any siblings of the parent. That way, when generic_make_request() calls make_request_fn for some particular device, we can be certain that all previously submited requests for that device have been completely handled and are not waiting for anything in the queue of requests maintained in generic_make_request(). An easy way to achieve this would be to use a last-in-first-out stack instead of a queue. However this will change the order of consecutive bios submitted by a make_request_fn, which could have unexpected consequences. Instead we take a slightly more complex approach. A fresh queue is created for each call to a make_request_fn. After it completes, any bios for a different device are placed on the front of the main queue, followed by any bios for the same device, followed by all bios that were already on the queue before the make_request_fn was called. This provides the depth-first approach without reordering bios on the same level. This, by itself, it not enough to remove all deadlocks. It just makes it possible for drivers to take the extra step required themselves. To avoid deadlocks, drivers must never risk waiting for a request after submitting one to generic_make_request. This includes never allocing from a mempool twice in the one call to a make_request_fn. A common pattern in drivers is to call bio_split() in a loop, handling the first part and then looping around to possibly split the next part. Instead, a driver that finds it needs to split a bio should queue (with generic_make_request) the second part, handle the first part, and then return. The new code in generic_make_request will ensure the requests to underlying bios are processed first, then the second bio that was split off. If it splits again, the same process happens. In each case one bio will be completely handled before the next one is attempted. With this is place, it should be possible to disable the punt_bios_to_recover() recovery thread for many block devices, and eventually it may be possible to remove it completely. Ref: http://www.spinics.net/lists/raid/msg54680.htmlTested-by:
Jinpu Wang <jinpu.wang@profitbricks.com> Inspired-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Johannes Weiner authored
commit 0cefabda upstream. Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") enabled cgroup-awareness in the shadow node shrinker, but forgot to also enable cgroup-awareness in the list_lru the shadow nodes sit on. Consequently, all shadow nodes are sitting on a global (per-NUMA node) list, while the shrinker applies the limits according to the amount of cache in the cgroup its shrinking. The result is excessive pressure on the shadow nodes from cgroups that have very little cache. Enable memcg-mode on the shadow node LRUs, such that per-cgroup limits are applied to per-cgroup lists. Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") Link: http://lkml.kernel.org/r/20170322005320.8165-1-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Vladimir Davydov <vdavydov@tarantool.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Felix Fietkau authored
commit 6c356eda upstream. With the IRQ stack changes integrated, the XRX200 devices started emitting a constant stream of kernel messages like this: [ 565.415310] Spurious IRQ: CAUSE=0x1100c300 This is caused by IP0 getting handled by plat_irq_dispatch() rather than its vectored interrupt handler, which is fixed by commit de856416e714 ("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch"). Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ for all MIPS CPU interrupts. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15077/ [james.hogan@imgtec.com: tweaked commit message] Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Jon Mason authored
commit 0c2bf9f9 upstream. GIC_PPI flags were misconfigured for the timers, resulting in errors like: [ 0.000000] GIC: PPI11 is secure or misconfigured Changing them to being edge triggered corrects the issue Suggested-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Joe Carnuccio authored
commit c4a9b538 upstream. Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Rafał Miłecki authored
commit 09f3510f upstream. Since early BCM5301X days we got abort handler that was removed by commit 937b1230 ("ARM: BCM5301X: remove workaround imprecise abort fault handler"). It assumed we need to deal only with pending aborts left by the bootloader. Unfortunately this isn't true for BCM5301X. When probing PCI config space (device enumeration) it is expected to have master aborts on the PCI bus. Most bridges don't forward (or they allow disabling it) these errors onto the AXI/AMBA bus but not the Northstar (BCM5301X) one. iProc PCIe controller on Northstar seems to be some older one, without a control register for errors forwarding. It means we need to workaround this at platform level. All newer platforms are not affected by this issue. Signed-off-by:
-
Naoya Horiguchi authored
commit c9d398fa upstream. I found the race condition which triggers the following bug when move_pages() and soft offline are called on a single hugetlb page concurrently. Soft offlining page 0x119400 at 0x700000000000 BUG: unable to handle kernel paging request at ffffea0011943820 IP: follow_huge_pmd+0x143/0x190 PGD 7ffd2067 PUD 7ffd1067 PMD 0 [61163.582052] Oops: 0000 [#1] SMP Modules linked in: binfmt_misc ppdev virtio_balloon parport_pc pcspkr i2c_piix4 parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi virtio_blk 8139too crc32c_intel ata_piix serio_raw libata virtio_pci 8139cp virtio_ring virtio mii floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: cap_check] CPU: 0 PID: 22573 Comm: iterate_numa_mo Tainted: P OE 4.11.0-rc2-mm1+ #2 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:follow_huge_pmd+0x143/0x190 RSP: 0018:ffffc90004bdbcd0 EFLAGS: 00010202 RAX: 0000000465003e80 RBX: ffffea0004e34d30 RCX: 00003ffffffff000 RDX: 0000000011943800 RSI: 0000000000080001 RDI: 0000000465003e80 RBP: ffffc90004bdbd18 R08: 0000000000000000 R09: ffff880138d34000 R10: ffffea0004650000 R11: 0000000000c363b0 R12: ffffea0011943800 R13: ffff8801b8d34000 R14: ffffea0000000000 R15: 000077ff80000000 FS: 00007fc977710740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea0011943820 CR3: 000000007a746000 CR4: 00000000001406f0 Call Trace: follow_page_mask+0x270/0x550 SYSC_move_pages+0x4ea/0x8f0 SyS_move_pages+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fc976e03949 RSP: 002b:00007ffe72221d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000117 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc976e03949 RDX: 0000000000c22390 RSI: 0000000000001400 RDI: 0000000000005827 RBP: 00007ffe72221e00 R08: 0000000000c2c3a0 R09: 0000000000000004 R10: 0000000000c363b0 R11: 0000000000000246 R12: 0000000000400650 R13: 00007ffe72221ee0 R14: 0000000000000000 R15: 0000000000000000 Code: 81 e4 ff ff 1f 00 48 21 c2 49 c1 ec 0c 48 c1 ea 0c 4c 01 e2 49 bc 00 00 00 00 00 ea ff ff 48 c1 e2 06 49 01 d4 f6 45 bc 04 74 90 <49> 8b 7c 24 20 40 f6 c7 01 75 2b 4c 89 e7 8b 47 1c 85 c0 7e 2a RIP: follow_huge_pmd+0x143/0x190 RSP: ffffc90004bdbcd0 CR2: ffffea0011943820 ---[ end trace e4f81353a2d23232 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled This bug is triggered when pmd_present() returns true for non-present hugetlb, so fixing the present check in follow_huge_pmd() prevents it. Using pmd_present() to determine present/non-present for hugetlb is not correct, because pmd_present() checks multiple bits (not only _PAGE_PRESENT) for historical reason and it can misjudge hugetlb state. Fixes: e66f17ff ("mm/hugetlb: take page table lock in follow_huge_pmd()") Link: http://lkml.kernel.org/r/1490149898-20231-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Johannes Weiner authored
commit 553af430 upstream. Huge pages are accounted as single units in the memcg's "file_mapped" counter. Account the correct number of base pages, like we do in the corresponding node counter. Link: http://lkml.kernel.org/r/20170322005111.3156-1-hannes@cmpxchg.orgSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Kees Cook authored
commit 854fbd6e upstream. Commit: aa1f1a63 ("lib/syscall: Pin the task stack in collect_syscall()") ... added logic to handle a process stack not existing, but left sp and pc uninitialized, which can be later reported via /proc/$pid/syscall for zombie processes, potentially exposing kernel memory to userspace. Zombie /proc/$pid/syscall before: -1 0xffffffff9a060100 0xffff92f42d6ad900 Zombie /proc/$pid/syscall after: -1 0x0 0x0 Reported-by:
Robert Święcki <robert@swiecki.net> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: aa1f1a63 ("lib/syscall: Pin the task stack in collect_syscall()") Link: http://lkml.kernel.org/r/20170323224616.GA92694@beastSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Tony Luck authored
commit 26a37ab3 upstream. Back in commit: 92b0729c ("x86/mm, x86/mce: Add memcpy_mcsafe()") ... I made a copy/paste error setting up the exception table entries and ended up with two for label .L_cache_w3 and none for .L_cache_w2. This means that if we take a machine check on: .L_cache_w2: movq 2*8(%rsi), %r10 then we don't have an exception table entry for this instruction and we can't recover. Fix: s/3/2/ Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 92b0729c ("x86/mm, x86/mce: Add memcpy_mcsafe()") Link: http://lkml.kernel.org/r/1490046030-25862-1-git-send-email-tony.luck@intel.comSigned-off-by:
-
Baoquan He authored
commit a46f60d7 upstream. Currently KASLR is enabled on three regions: the direct mapping of physical memory, vamlloc and vmemmap. However the EFI region is also mistakenly included for VA space randomization because of misusing EFI_VA_START macro and assuming EFI_VA_START < EFI_VA_END. (This breaks kexec and possibly other things that rely on stable addresses.) The EFI region is reserved for EFI runtime services virtual mapping which should not be included in KASLR ranges. In Documentation/x86/x86_64/mm.txt, we can see: ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space EFI uses the space from -4G to -64G thus EFI_VA_START > EFI_VA_END, Here EFI_VA_START = -4G, and EFI_VA_END = -64G. Changing EFI_VA_START to EFI_VA_END in mm/kaslr.c fixes this problem. Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
Bhupesh Sharma <bhsharma@redhat.com> Acked-by:
Dave Young <dyoung@redhat.com> Acked-by:
Thomas Garnier <thgarnie@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1490331592-31860-1-git-send-email-bhe@redhat.comSigned-off-by:
-
Lucas Stach authored
commit f3cd1b06 upstream. The fence allocation needs to be protected by the GPU mutex, otherwise the fence seqnos of concurrent submits might not match the insertion order of the jobs in the kernel ring. This breaks the assumption that jobs complete with monotonically increasing fence seqnos. Fixes: d9853490 (drm/etnaviv: take GPU lock later in the submit process) Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Eric Anholt authored
commit 6d6e5003 upstream. Without this, the first modeset would dereference past the allocation when trying to free the mm node. Signed-off-by:
Eric Anholt <eric@anholt.net> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170328201343.4884-1-eric@anholt.net Fixes: d8dbf44f ("drm/vc4: Make the CRTCs cooperate on allocating display lists.") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Michel Dänzer authored
commit ce4b4f22 upstream. We were accidentally only overriding the first VRAM placement. For BOs with the RADEON_GEM_NO_CPU_ACCESS flag set, radeon_ttm_placement_from_domain creates a second VRAM placment with fpfn == 0. If VRAM is almost full, the first VRAM placement with fpfn > 0 may not work, but the second one with fpfn == 0 always will (the BO's current location trivially satisfies it). Because "moving" the BO to its current location puts it back on the LRU list, this results in an infinite loop. Fixes: 2a85aedd ("drm/radeon: Try evicting from CPU accessible to inaccessible VRAM first") Reported-by:
Zachary Michaels <zmichaels@oblong.com> Reported-and-Tested-by:
Julien Isorce <jisorce@oblong.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
David Hildenbrand authored
commit 90db1043 upstream. No caller currently checks the return value of kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on freeing their device. A stale reference will remain in the io_bus, getting at least used again, when the iobus gets teared down on kvm_destroy_vm() - leading to use after free errors. There is nothing the callers could do, except retrying over and over again. So let's simply remove the bus altogether, print an error and make sure no one can access this broken bus again (returning -ENOMEM on any attempt to access it). Fixes: e93f8a0f ("KVM: convert io_bus to SRCU") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Peter Xu authored
commit df630b8c upstream. When releasing the bus, let's clear the bus pointers to mark it out. If any further device unregister happens on this bus, we know that we're done if we found the bus being released already. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Uwe Kleine-König authored
commit a6040bc6 upstream. The reference manual for the i.MX28 recommends to calculate the divisor as divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer , so let's do this. For a typical setup of UARTCLK = 24 MHz and baud rate = 115200 this changes the divisor from 6666 to 6667 and so the actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to 115194.240 Bd (error ≅ 0.005 %). Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Alan Stern authored
commit 16336820 upstream. Using KASAN, Dmitry found a bug in the rh_call_control() routine: If buffer allocation fails, the routine returns immediately without unlinking its URB from the control endpoint, eventually leading to linked-list corruption. This patch fixes the problem by jumping to the end of the routine (where the URB is unlinked) when an allocation failure occurs. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
-
Nicolas Ferre authored
commit 497e1e16 upstream. A side effect of 89d82324 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") is that the console can be called with TX path disabled. Then the system would hang trying to push charecters out in atmel_console_putchar(). Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 89d82324 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx") Signed-off-by:
-
Richard Genoud authored
commit 31ca2c63 upstream. If uart_flush_buffer() is called between atmel_tx_dma() and atmel_complete_tx_dma(), the circular buffer has been cleared, but not atmel_port->tx_len. That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE - atmel_port->tx_len) bytes). Tested-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Joerg Roedel authored
commit 08f63d97 upstream. No platform-device is required for IO(x)APICs, so don't even create them. [ rjw: This fixes a problem with leaking platform device objects after IOAPIC/IOxAPIC hot-removal events.] Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 61b79e16 upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Helge Deller authored
commit 554bfece upstream. pa_memcpy() is the major memcpy implementation in the parisc kernel which is used to do any kind of userspace/kernel memory copies. Al Viro noticed various bugs in the implementation of pa_mempcy(), most notably that in case of faults it may report back to have copied more bytes than it actually did. Fixing those bugs is quite hard in the C-implementation, because the compiler is messing around with the registers and we are not guaranteed that specific variables are always in the same processor registers. This makes proper fault handling complicated. This patch implements pa_memcpy() in assembler. That way we have correct fault handling and adding a 64-bit copy routine was quite easy. Runtime tested with 32- and 64bit kernels. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
