- 03 Sep, 2018 38 commits
-
-
Laurent Pinchart authored
The connect handle of the analog TV and HDMI connectors casts the dssdev to panel data only to then access fields of the panel data that are also present in the dssdev. Remove the cast and use dssdev directly. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omapdss_of_find_source_for_first_ep() function locates the source corresponding to the first endpoint of the first port of a device node. We can easily extend it to locate sinks as well by passing the port number as a parameter. This will be useful to find sinks in encoders drivers. Extend the function and rename it to omapdss_of_find_connected_device() to reflect its new extended purpose. Additionally, it is useful to differentiate between failures to return the connected device because no link exists in the device tree for the requested port, or because the connected device as described in the device tree is invalid or not probed yet. Return NULL in the first case and an error code in the second case, and update the callers accordingly. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device port_num field stores the DT port number associated with the device. The field is used in different ways depending on the device type: - For DPI outputs, the port number is used as an identifier of the DPI instance - For sources, the port number is used to look up the omap_dss_device by DT port node As omap_dss_device instances are only looked up as sources by sinks, setting the field to the number of the source port works for both use cases. However, to enable looking up sinks, we need to record all the ports associated with an omap_dss_device. Do so by turning the port_num field into an of_ports bitmask. For DPI outputs the port number is additionally stored in the dpi_data structure as the output ID. Signed-off-by:
-
Laurent Pinchart authored
The omapdss_find_output_from_display() function is only used to retrieve the dispc channel corresponding to the display. Return the dispc channel directly, and rename the function to omapdss_device_get_dispc_channel() to match its new purpose. The dssdev->id check is removed as the dssdev is guaranteed to be an output and have a non-zero id, as proved by the lack of crash despite the caller never checking the returned pointer before dereferencing it. As the function is not specific to outputs anymore, move it from output.c to base.c. Signed-off-by:
-
Laurent Pinchart authored
The DSS manager ops and private data pointer are specific to a DSS instance. Store them in the dss_device structure instead of global variable. Signed-off-by:
-
Laurent Pinchart authored
Storing the dss_device pointer in the omap_dss_device structure will allow accessing the dss_device from the dss_mgr API functions. Signed-off-by:
-
Laurent Pinchart authored
The functions operate on any omap_dss_device, move them from display.c to base.c. While at it rename them to match the naming of the other functions operating on struct omap_dss_device. Signed-off-by:
-
Laurent Pinchart authored
The panel devices list isn't used anymore, all panel devices are accessed through the global devices list. Remove it. Signed-off-by:
-
Laurent Pinchart authored
Split the function into omapdss_display_init() to perform display-specific initialization of the omap_dss_device, and omapdss_register_display() to register the device. The latter will then be replaced by more generic registration. Signed-off-by:
-
Laurent Pinchart authored
Despite its name, the omap_dss_get_next_device() function operates on display devices only. Make it more generic by allowing operation on all devices, with a parameter to specify the device type. While at it rename the function to omapdss_device_get_next() to match the naming of the other functions operating on struct omap_dss_device. Signed-off-by:
-
Laurent Pinchart authored
The macro iterates over displays only, rename it accordingly. Signed-off-by:
-
Laurent Pinchart authored
The output devices list isn't used anymore, all output devices are accessed through the global devices list. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The DSI clocks are dumped in the DSS-level debugfs clocks file. This complicates the implementation as the DSI private data has to be looked up through the outputs list. Simplify it by creating two debugfs files, dsi1_clks and dsi2_clks, to dump the DSI clocks. Signed-off-by:
-
Laurent Pinchart authored
The DSI debugfs regs and irqs show handlers received a pointer to the DSI private data. There's no need to look it up from the list of DSS outputs. Use the pointer directly, this allows simplifying the implementation of the handlers. Signed-off-by:
-
Laurent Pinchart authored
All connectors, encoders and panels store a pointer to their input omap_dss_device in the panel driver data structure. This duplicates the src field in the omap_dss_device structure. Remove the private copy and use the src field. Signed-off-by:
-
Laurent Pinchart authored
The encoders duplicate the same omap_dss_device src and dst fields set and checks in their connect and disconnect handlers. Move the code to the connect and disconnect wrappers. Signed-off-by:
-
Laurent Pinchart authored
In preparation for the move of checks from the disconnect handlers to the omapdss_device_disconnect() function, replace direct calls to the disconnect handlers at remove time with calls to omapdss_device_disconnect(). Signed-off-by:
-
Laurent Pinchart authored
The connectors, encoders and display duplicate the same debug messages and connection checks in their omap_dss_device connect and disconnect handlers. Move the code to the connect and disconnect wrappers. To simplify the code the connect function returns -EBUSY unconditionally if the device is already connected. This doesn't cause any change in practice: the connect handler of displays is never called on a connected device as it is only invoked during omapdrm initialization. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device objects model display components and are connected at runtime to create display pipelines. The connect and disconnect operations implemented by each component contain lots of duplicate code. As a first step towards fixing this, create new functions to wrap the direct calls to those operations and use them. Signed-off-by:
-
Laurent Pinchart authored
The various types of omapdss_*_ops structures define multiple operations that are not specific to a bus type. To simplify the code and remove dependencies on specific bus types move those operations to a common structure. Operations that are specific to a bus type are kept in the specialized ops structures. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_find_output_by_port() function looks up an omap_dss_device by port from the list of devices registered as outputs. In preparation for looking up sinks in addition to sources, allow the function to look up any registered device. Rename it to omap_dss_find_device_by_port() to match its new purpose. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_find_output_by_port_node() function defined in output.c looks up an output from its port node. To do so it needs to call helper functions from dss-of.c to lookup the port parent and the port number. As omap_dss_find_output_by_port_node() is only called by omapdss_of_find_source_for_first_ep() from dss-of.c this goes back and forth between the to source files and isn't very clear. Simplify the code by passing both the parent and the port number to omap_dss_find_output_by_port_node() instead of the port node, and rename the function to omap_dss_find_output_by_port(). Signed-off-by:
-
Laurent Pinchart authored
The omapdss_component_is_loaded() function test whether a component is loaded by checking whether it is present in the displays list or the outputs list. Simplify the implementation by checking for the component in the global omap_dss_device list. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device instances are stored in two separate lists, depending on whether they are panels or outputs. Create a third list that stores all omap_dss_device instances to allow generic code to operate on all instances. Signed-off-by:
-
Laurent Pinchart authored
For coherency with the panel_list field, rename list to output_list. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device panel.dsi_pix_fmt and panel.dsi_mode fields are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device structure stores a videomode. All the connector and panel drivers that use omap_dss_device also store the videomode in their own panel_drv_data structures. There's no need to duplicate, remove the videomode field from omap_dss_device. Signed-off-by:
-
Laurent Pinchart authored
The structure contains function pointers that don't need to be modified. Make all its instances const to improve security. Signed-off-by:
-
Laurent Pinchart authored
All omap_dss_driver instances provide the get_timings operation. Remove the default function. Signed-off-by:
-
Laurent Pinchart authored
The get_timings operation from DSS encoders (not to be confused with the identically named operation in omap_dss_driver) is never called. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The operations are never used, remove them. If the need to set wide screen signaling data arises later, it should be implemented by extending the DRM bridge API. Signed-off-by:
-
Laurent Pinchart authored
The dpi_init_port() and sdi_init_port() functions can return errors but their return value is ignored. This prevents both probe failures and probe deferral from working correctly. Propagate the errors up the call stack. Signed-off-by:
-
Jyri Sarha authored
Register the omapdrm device when we know that dss device probe going to succeed. This avoids DSS6 and DSS2 omapdrm device registration from colliding with each other. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Laurent Pinchart authored
The omapdss_gather_components() function walks the OF graph to create a list of all components part of the display device. There's no need to delay this operation until DSS bind time as we have all the information we need at probe time. Signed-off-by:
-
Peter Ujfalusi authored
As ordering of the dss_devices based on DT aliases is now implemented in omap_drm.c, there is no need to do the ordering in dss/display.c anymore. At the same time remove the alias member of the omap_dss_device struct since it is no longer needed. The only place it was used is in the omapdss_register_display() function. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
Sort the dssdev array based on DT aliases. With this change we can remove the panel ordering from dss/display.c and have all sorting related to dssdevs in one place. Signed-off-by:
-
Peter Ujfalusi authored
Instead of reaching back to DSS to iterate through the dss_devices every time, use an internal array where we store the available and usable dss_devices. At the same time remove the omapdss_device_is_connected() check from omap_modeset_init() as it became irrelevant: We are not adding dssdevs if their connect failed. Signed-off-by:
-
Peter Ujfalusi authored
If we allocate the drm_device earlier we can just return the error code without the need to use goto. Do the unref of the drm_device as a last step when cleaning up. This will make the drm_device available longer for us and makes sure that we only free up the memory when all other cleanups have been already done. Signed-off-by:
-
- 26 Aug, 2018 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer update from Thomas Gleixner: "New defines for the compat time* types so they can be shared between 32bit and 64bit builds. Not used yet, but merging them now allows the actual conversions to be merged through different maintainer trees without dependencies We still have compat interfaces for 32bit on 64bit even with the new 2038 safe timespec/val variants because pointer size is different. And for the old style timespec/val interfaces we need yet another 'compat' interface for both 32bit native and 32bit on 64bit" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: y2038: Provide aliases for compat helpers
-
