1. 28 Mar, 2017 18 commits
    • James Hogan's avatar
      KVM: MIPS: Abstract guest CP0 register access for VZ · a27660f3
      James Hogan authored
      Abstract the MIPS KVM guest CP0 register access macros into inline
      functions which are generated by macros. This allows them to be
      generated differently for VZ, where they will usually need to access the
      hardware guest CP0 context rather than the saved values in RAM.
      
      Accessors for each individual register are generated using these macros:
      
       - __BUILD_KVM_*_SW() for registers which are not present in the VZ
         hardware guest context, so kvm_{read,write}_c0_guest_##name() will
         access the saved value in RAM regardless of whether VZ is enabled.
      
       - __BUILD_KVM_*_HW() for registers which are present in the VZ hardware
         guest context, so kvm_{read,write}_c0_guest_##name() will access the
         hardware register when VZ is enabled.
      
      These build the underlying accessors using further macros:
      
       - __BUILD_KVM_*_SAVED() builds e.g. kvm_{read,write}_sw_gc0_##name()
         functions for accessing the saved versions of the registers in RAM.
         This is used for implementing the common
         kvm_{read,write}_c0_guest_##name() accessors with T&E where registers
         are always stored in RAM, but are also available with VZ HW registers
         to allow them to be accessed while saved.
      
       - __BUILD_KVM_*_VZ() builds e.g. kvm_{read,write}_vz_gc0_##name()
         functions for accessing the VZ hardware guest context registers
         directly. This is used for implementing the common
         kvm_{read,write}_c0_guest_##name() accessors with VZ.
      
       - __BUILD_KVM_*_WRAP() builds wrappers with different names, which
         allows the common kvm_{read,write}_c0_guest_##name() functions to be
         implemented using the VZ accessors while still having the SAVED
         accessors available too.
      
       - __BUILD_KVM_SAVE_VZ() builds functions for saving and restoring VZ
         hardware guest context register state to RAM, improving conciseness
         of VZ context saving and restoring.
      
      Similar macros exist for generating modifiers (set, clear, change),
      either with a normal unlocked read/modify/write, or using atomic LL/SC
      sequences.
      
      These changes change the types of 32-bit registers to u32 instead of
      unsigned long, which requires some changes to printk() functions in MIPS
      KVM.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      a27660f3
    • James Hogan's avatar
      KVM: MIPS: Add guest exit exception callback · 28c1e762
      James Hogan authored
      Add a callback for MIPS KVM implementations to handle the VZ guest
      exit exception. Currently the trap & emulate implementation contains a
      stub which reports an internal error, but the callback will be used
      properly by the VZ implementation.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      28c1e762
    • James Hogan's avatar
      KVM: MIPS: Add hardware_{enable,disable} callback · edab4fe1
      James Hogan authored
      Add an implementation callback for the kvm_arch_hardware_enable() and
      kvm_arch_hardware_disable() architecture functions, with simple stubs
      for trap & emulate. This is in preparation for VZ which will make use of
      them.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      edab4fe1
    • James Hogan's avatar
      KVM: MIPS: Add callback to check extension · 607ef2fd
      James Hogan authored
      Add an implementation callback for checking presence of KVM extensions.
      This allows implementation specific extensions to be provided without
      ifdefs in mips.c.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      607ef2fd
    • James Hogan's avatar
      KVM: MIPS: Init timer frequency from callback · a517c1ad
      James Hogan authored
      Currently the software emulated timer is initialised to a frequency of
      100MHz by kvm_mips_init_count(), but this isn't suitable for VZ where
      the frequency of the guest timer matches that of the host.
      
      Add a count_hz argument so the caller can specify the default frequency,
      and move the call from kvm_arch_vcpu_create() to the implementation
      specific vcpu_setup() callback, so that VZ can specify a different
      frequency.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      a517c1ad
    • James Hogan's avatar
      KVM: MIPS: Add 64BIT capability · 578fd61d
      James Hogan authored
      Add a new KVM_CAP_MIPS_64BIT capability to indicate that 64-bit MIPS
      guests are available and supported. In this case it should still be
      possible to run 32-bit guest code. If not available it won't be possible
      to run 64-bit guest code and the instructions may not be available, or
      the kernel may not support full context switching of 64-bit registers.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Cc: linux-doc@vger.kernel.org
      578fd61d
    • James Hogan's avatar
      KVM: MIPS: Add VZ & TE capabilities · a8a3c426
      James Hogan authored
      Add new KVM_CAP_MIPS_VZ and KVM_CAP_MIPS_TE capabilities, and in order
      to allow MIPS KVM to support VZ without confusing old users (which
      expect the trap & emulate implementation), define and start checking
      KVM_CREATE_VM type codes.
      
      The codes available are:
      
       - KVM_VM_MIPS_TE = 0
      
         This is the current value expected from the user, and will create a
         VM using trap & emulate in user mode, confined to the user mode
         address space. This may in future become unavailable if the kernel is
         only configured to support VZ, in which case the EINVAL error will be
         returned and KVM_CAP_MIPS_TE won't be available even though
         KVM_CAP_MIPS_VZ is.
      
       - KVM_VM_MIPS_VZ = 1
      
         This can be provided when the KVM_CAP_MIPS_VZ capability is available
         to create a VM using VZ, with a fully virtualized guest virtual
         address space. If VZ support is unavailable in the kernel, the EINVAL
         error will be returned (although old kernels without the
         KVM_CAP_MIPS_VZ capability may well succeed and create a trap &
         emulate VM).
      
      This is designed to allow the desired implementation (T&E vs VZ) to be
      potentially chosen at runtime rather than being fixed in the kernel
      configuration.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Cc: linux-doc@vger.kernel.org
      a8a3c426
    • James Hogan's avatar
      KVM: MIPS: Extend counters & events for VZ GExcCodes · a7244920
      James Hogan authored
      Extend MIPS KVM stats counters and kvm_transition trace event codes to
      cover hypervisor exceptions, which have their own GExcCode field in
      CP0_GuestCtl0 with up to 32 hypervisor exception cause codes.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      a7244920
    • James Hogan's avatar
      KVM: MIPS: Update kvm_lose_fpu() for VZ · c58cf741
      James Hogan authored
      Update the implementation of kvm_lose_fpu() for VZ, where there is no
      need to enable the FPU/MSA in the root context if the FPU/MSA state is
      loaded but disabled in the guest context.
      
      The trap & emulate implementation needs to disable FPU/MSA in the root
      context when the guest disables them in order to catch the COP1 unusable
      or MSA disabled exception when they're used and pass it on to the guest.
      
      For VZ however as long as the context is loaded and enabled in the root
      context, the guest can enable and disable it in the guest context
      without the hypervisor having to do much, and will take guest exceptions
      without hypervisor intervention if used without being enabled in the
      guest context.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      c58cf741
    • James Hogan's avatar
      KVM: MIPS/Emulate: Implement 64-bit MMIO emulation · 59d7814a
      James Hogan authored
      Implement additional MMIO emulation for MIPS64, including 64-bit
      loads/stores, and 32-bit unsigned loads. These are only exposed on
      64-bit VZ hosts.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      59d7814a
    • James Hogan's avatar
      KVM: MIPS/Emulate: De-duplicate MMIO emulation · 8b48d5b7
      James Hogan authored
      Refactor MIPS KVM MMIO load/store emulation to reduce code duplication.
      Each duplicate differed slightly anyway, and it will simplify adding
      64-bit MMIO support for VZ.
      
      kvm_mips_emulate_store() and kvm_mips_emulate_load() can now return
      EMULATE_DO_MMIO (as possibly originally intended). We therefore stop
      calling either of these from kvm_mips_emulate_inst(), which is now only
      used by kvm_trap_emul_handle_cop_unusable() which is picky about return
      values.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      8b48d5b7
    • James Hogan's avatar
      KVM: MIPS: Implement HYPCALL emulation · 955d8dc3
      James Hogan authored
      Emulate the HYPCALL instruction added in the VZ ASE and used by the MIPS
      paravirtualised guest support that is already merged. The new hypcall.c
      handles arguments and the return value. No actual hypercalls are yet
      supported, but this still allows us to safely step over hypercalls and
      set an error code in the return value for forward compatibility.
      
      Non-zero HYPCALL codes are not handled.
      
      We also document the hypercall ABI which asm/kvm_para.h uses.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
      Cc: David Daney <david.daney@cavium.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Cc: linux-doc@vger.kernel.org
      955d8dc3
    • James Hogan's avatar
      MIPS: asm/tlb.h: Add UNIQUE_GUEST_ENTRYHI() macro · a6c09b9f
      James Hogan authored
      Add a distinct UNIQUE_GUEST_ENTRYHI() macro for invalidation of guest
      TLB entries by KVM, using addresses in KSeg1 rather than KSeg0. This
      avoids conflicts with guest invalidation routines when there is no EHINV
      bit to mark the whole entry as invalid, avoiding guest machine check
      exceptions on Cavium Octeon III.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      a6c09b9f
    • James Hogan's avatar
      MIPS: Add some missing guest CP0 accessors & defs · eb0bab38
      James Hogan authored
      Add some missing guest accessors and register field definitions for KVM
      for MIPS VZ to make use of.
      
      Guest CP0_LLAddr register accessors and definitions for the LLB field
      allow KVM to clear the guest LLB to cancel in-progress LL/SC atomics on
      restore, and to emulate accesses by the guest to the CP0_LLAddr
      register.
      
      Bitwise modifiers and definitions for the guest CP0_Wired and
      CP0_Config1 registers allow KVM to modify fields within the CP0_Wired
      and CP0_Config1 registers.
      
      Finally a definition for the CP0_Config5.SBRI bit allows KVM to
      initialise and allow modification of the guest version of the SBRI bit.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      eb0bab38
    • James Hogan's avatar
      MIPS: Probe guest MVH · a929bdc5
      James Hogan authored
      Probe for availablility of M{T,F}HC0 instructions used with e.g. XPA in
      the VZ guest context, and make it available via cpu_guest_has_mvh. This
      will be helpful in properly emulating the MAAR registers in KVM for MIPS
      VZ.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      a929bdc5
    • James Hogan's avatar
      MIPS: Probe guest CP0_UserLocal · a7c7ad6c
      James Hogan authored
      Probe for presence of guest CP0_UserLocal register and expose via
      cpu_guest_has_userlocal. This register is optional pre-r6, so this will
      allow KVM to only save/restore/expose the guest CP0_UserLocal register
      if it exists.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      a7c7ad6c
    • James Hogan's avatar
      MIPS: Separate MAAR V bit into VL and VH for XPA · f359a111
      James Hogan authored
      The MAAR V bit has been renamed VL since another bit called VH is added
      at the top of the register when it is extended to 64-bits on a 32-bit
      processor with XPA. Rename the V definition, fix the various users, and
      add definitions for the VH bit. Also add a definition for the MAARI
      Index field.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      f359a111
    • James Hogan's avatar
      MIPS: Add defs & probing of UFR · 4e87580e
      James Hogan authored
      Add definitions and probing of the UFR bit in Config5. This bit allows
      user mode control of the FR bit (floating point register mode). It is
      present if the UFRP bit is set in the floating point implementation
      register.
      
      This is a capability KVM may want to expose to guest kernels, even
      though Linux is unlikely to ever use it due to the implications for
      multi-threaded programs.
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: Paul Burton <paul.burton@imgtec.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: "Radim Krčmář" <rkrcmar@redhat.com>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      4e87580e
  2. 20 Mar, 2017 5 commits
    • Linus Torvalds's avatar
      Linux 4.11-rc3 · 97da3854
      Linus Torvalds authored
      97da3854
    • Linus Torvalds's avatar
      mm/swap: don't BUG_ON() due to uninitialized swap slot cache · 452b94b8
      Linus Torvalds authored
      This BUG_ON() triggered for me once at shutdown, and I don't see a
      reason for the check.  The code correctly checks whether the swap slot
      cache is usable or not, so an uninitialized swap slot cache is not
      actually problematic afaik.
      
      I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
      I'm not sure why that seemingly pointless check was there.  I suspect
      the real fix is to just remove it entirely, but for now we'll warn about
      it but not bring the machine down.
      
      Cc: "Huang, Ying" <ying.huang@intel.com>
      Cc: Tim Chen <tim.c.chen@linux.intel.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      452b94b8
    • Linus Torvalds's avatar
      Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · a07a6e41
      Linus Torvalds authored
      Pull more powerpc fixes from Michael Ellerman:
       "A couple of minor powerpc fixes for 4.11:
      
         - wire up statx() syscall
      
         - don't print a warning on memory hotplug when HPT resizing isn't
           available
      
        Thanks to: David Gibson, Chandan Rajendra"
      
      * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        powerpc/pseries: Don't give a warning when HPT resizing isn't available
        powerpc: Wire up statx() syscall
      a07a6e41
    • Linus Torvalds's avatar
      Merge branch 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux · 4571bc5a
      Linus Torvalds authored
      Pull parisc fixes from Helge Deller:
      
       - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
         modules with CONFIG_MODVERSIONS.
      
       - Dave Anglin optimized the cache flushing for vmap ranges.
      
       - Arvind Yadav provided a fix for a potential NULL pointer dereference
         in the parisc perf code (and some code cleanups).
      
       - I wired up the new statx system call, fixed some compiler warnings
         with the access_ok() macro and fixed shutdown code to really halt a
         system at shutdown instead of crashing & rebooting.
      
      * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
        parisc: Fix system shutdown halt
        parisc: perf: Fix potential NULL pointer dereference
        parisc: Avoid compiler warnings with access_ok()
        parisc: Wire up statx system call
        parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
        parisc: support R_PARISC_SECREL32 relocation in modules
      4571bc5a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 8aa34172
      Linus Torvalds authored
      Pull SCSI target fixes from Nicholas Bellinger:
       "The bulk of the changes are in qla2xxx target driver code to address
        various issues found during Cavium/QLogic's internal testing (stable
        CC's included), along with a few other stability and smaller
        miscellaneous improvements.
      
        There are also a couple of different patch sets from Mike Christie,
        which have been a result of his work to use target-core ALUA logic
        together with tcm-user backend driver.
      
        Finally, a patch to address some long standing issues with
        pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
        which will make folks using physical (or virtual) magnetic tape happy"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
        qla2xxx: Update driver version to 9.00.00.00-k
        qla2xxx: Fix delayed response to command for loop mode/direct connect.
        qla2xxx: Change scsi host lookup method.
        qla2xxx: Add DebugFS node to display Port Database
        qla2xxx: Use IOCB interface to submit non-critical MBX.
        qla2xxx: Add async new target notification
        qla2xxx: Export DIF stats via debugfs
        qla2xxx: Improve T10-DIF/PI handling in driver.
        qla2xxx: Allow relogin to proceed if remote login did not finish
        qla2xxx: Fix sess_lock & hardware_lock lock order problem.
        qla2xxx: Fix inadequate lock protection for ABTS.
        qla2xxx: Fix request queue corruption.
        qla2xxx: Fix memory leak for abts processing
        qla2xxx: Allow vref count to timeout on vport delete.
        tcmu: Convert cmd_time_out into backend device attribute
        tcmu: make cmd timeout configurable
        tcmu: add helper to check if dev was configured
        target: fix race during implicit transition work flushes
        target: allow userspace to set state to transitioning
        target: fix ALUA transition timeout handling
        ...
      8aa34172
  3. 19 Mar, 2017 15 commits
  4. 18 Mar, 2017 2 commits
    • Nicholas Bellinger's avatar
      tcmu: Convert cmd_time_out into backend device attribute · 7d7a7435
      Nicholas Bellinger authored
      Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
      which has historically been used by parameters needed for initial
      backend device configuration, go ahead and move cmd_time_out into
      a backend device attribute.
      
      In order to do this, tcmu_module_init() has been updated to create
      a local struct configfs_attribute **tcmu_attrs, that is based upon
      the existing passthrough_attrib_attrs along with the new cmd_time_out
      attribute.  Once **tcm_attrs has been setup, go ahead and point
      it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.
      
      Also following MNC's previous change, ->cmd_time_out is stored in
      milliseconds but exposed via configfs in seconds.  Also, note this
      patch restricts the modification of ->cmd_time_out to before +
      after the TCMU device has been configured, but not while it has
      active fabric exports.
      
      Cc: Mike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      7d7a7435
    • Mike Christie's avatar
      tcmu: make cmd timeout configurable · af980e46
      Mike Christie authored
      A single daemon could implement multiple types of devices
      using multuple types of real devices that may not support
      restarting from crashes and/or handling tcmu timeouts. This
      makes the cmd timeout configurable, so handlers that do not
      support it can turn if off for now.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      af980e46