- 16 Aug, 2015 39 commits
-
-
Gustavo Padovan authored
This functions was just hiding the encoder and connector creation in a way that was less clean than if we get rid of it. For example, exynos_encoder ops had .create_connector() defined only because we were handing off the encoder and connector creation to exynos_drm_create_enc_conn(). Without this function we can directly call the create_connector function internally in the code, without the need of any vtable access. It also does some refactoring in the code like creating a bind function for dpi devices. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
.commit() is not used anymore, Exynos encoders now follow the .enable()/.disable() semantics from drm atomic core, so remove this callback. Signed-off-by:
-
Gustavo Padovan authored
exynos_dp_commit() was getting called twice by exynos encoder core, once inside the .enable() call and another time by .commit() itself. The remove of the second call caused the wake of a bug, the operations orders inside exynos_dp_commit was wrong and we had to move exynos_dp_start_video() to be the last operation in there. Signed-off-by:
-
Gustavo Padovan authored
hdmi_commit() was getting called twice by exynos encoder core, once inside the .enable() call and another time by .commit() itself. Signed-off-by:
-
Gustavo Padovan authored
This struct was just representing encoder information, it was a member of struct exynos_drm_encoder, so any code trying to access encoder data would have to go through the encoder struct, get the display struct and then get the data it want. During this patchset we also realized that the only data exynos_drm_encoder needs to store is the drm_encoder parent and the exynos_drm_encoder_ops. Signed-off-by:
-
Gustavo Padovan authored
All CRTCs can only be LCD, HDMI or VIDI, so basically all CRTCs will be a possible CRTCs. This patch removes an extra function with switch that was only checking if the CRTC type was one of those three above. Signed-off-by:
-
Gustavo Padovan authored
These two display_ops are not used anywhere, remove them. Signed-off-by:
-
Gustavo Padovan authored
phy_power_on() and phy_power_off() already checks for NULL pointer. This patch removes the wrappers exynos_dp_phy_init() and exynos_dp_phy_exit() since the only think they were doing was a check for NULL phy. Signed-off-by:
-
Gustavo Padovan authored
The DRM Core doesn't have a dpms() operation anymore, everything now is enable() or disable(). Signed-off-by:
-
Gustavo Padovan authored
Instead of blindly ignore the return value of enable_vblank return it to the upper DRM layer for error handling. Suggested-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Gustavo Padovan authored
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to src_{w,h} to make it similar to the atomic state names. Signed-off-by: -
Gustavo Padovan authored
Now after the move to use drm_plane_state directly struct drm_plane_state has many unused fields, along with others that weren't used before the plane state change. Thus remove them all. Signed-off-by:
-
Gustavo Padovan authored
For some fields the use of struct exynos_drm_plane filled with data from the plane state just creates a source of duplicated information and overhead. Here we change the crtc drivers to access the plane state directly simplifying the code by not relying on a exynos internal struct. Signed-off-by:
-
Gustavo Padovan authored
We already have the plane pointer in before calling .update_plane() or disable_plane() so pass it directly to those calls avoiding a new conversion from zpos to struct exynos_drm_plane. v2: don't remove check for suspended in FIMD (comment by Joonyoung) Signed-off-by:
-
Gustavo Padovan authored
Rename win_commit() helper to update_plane() and win_disable() to disable_plane(). Signed-off-by:
-
Gustavo Padovan authored
The same check is placed twice in fimd/decon_update_plane(), remove one of them. Signed-off-by:
-
Gustavo Padovan authored
Get rid of legacy DRM vblank function that are less clear to use. The new ones basically requires only the crtc as parameters. It also clean ups exynos_drm_crtc_finish_pageflip() parameters as a consequence. Signed-off-by:
-
Gustavo Padovan authored
Instead of giving -1 to as arg to drm_send_vblank_event() pass the correct pipe number to it. Signed-off-by:
-
Joonyoung Shim authored
This is simplest solution about reported problem[1]. It's no problem to clear channel only when iommu is enabled, if we consider that we cannot recognize iommu errors when iommu is disabled and it have been valid until now. But this cannot be nice solution. [1] https://lkml.org/lkml/2015/7/21/404Reported-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
Already drm_iommu_attach_device checks whether support iommu internally. It should clear channels always regardless iommu support. We didn't know because we can detect the problem when iommu is enabled, so we don't have to use drm_iommu_attach_device_if_possible and then we can remove drm_iommu_attach_device_if_possible and clear_channels function pointer. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
The vidi is virtual kms driver and now it is registered earlier than actual hw kms drivers, so it will occupy crtc index 0. Some users assume the condition yet that actual hw kms driver has crtc index 0. It may or may not be matter but let's arrange register order. Signed-off-by:
-
Andrzej Hajda authored
Driver uses only VSYNC interrupts, so we need to cache VSYNC bit state only. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
-
Andrzej Hajda authored
The driver uses bool protected by mutex to track power state. The patch replaces this combo with single bit and atomic bitops. Signed-off-by:
-
Joonyoung Shim authored
Already drm_iommu_attach_device and drm_iommu_detach_device check whether support iommu internally, so we don't have to call is_drm_iommu_supported before call them. Signed-off-by:
-
Joonyoung Shim authored
If CONFIG_ARM_DMA_USE_IOMMU is disable, CONFIG_DRM_EXYNOS_IOMMU also is disable. When CONFIG_DRM_EXYNOS_IOMMU is disable, is_drm_iommu_supported() returns always false, so we can remove to use ifdef CONFIG_ARM_DMA_USE_IOMMU in is_drm_iommu_supported(). Signed-off-by:
-
Hyungwon Hwang authored
The unique results of all the combination of rotation and flip can be represented by just 8 states. This patch handles all the combination correctly. Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
The patch removes intermediate struct for HDMIv14 register configuration, instead registry values are calculated on the fly. Signed-off-by:
-
Andrzej Hajda authored
The patch removes intermediate struct for HDMIv13 register configuration, instead registry values are calculated on the fly. Signed-off-by:
-
Andrzej Hajda authored
The patch removes redundant fields from hdmi_conf_regs. Their values can be calculated from current_mode. This patch is the first step to remove whole hdmi_conf_regs structure. Signed-off-by:
-
Andrzej Hajda authored
The patch replaces duplicated driver data fields in private context with pointer to driver data. It also simplifies driver data lookup code. Signed-off-by:
-
Andrzej Hajda authored
Most of the code is called by drm core framework, so it is already synchronized. The only async function is irq routine which only calls drm framework so it does not need to be synchronized. Signed-off-by:
-
Andrzej Hajda authored
GPIO is tested only in hdmi_detect, so there is no reason to set it in other places and to preserve its value in context. Signed-off-by:
-
Andrzej Hajda authored
s5p_hdmi_platform_data were used before device tree introduction. As HDMI driver is DT only we can drop this struct completely. Signed-off-by:
-
Marek Szyprowski authored
Once pm_runtime_set_active() gets called, the kernel assumes that given device has already enabled runtime pm and will call pm_runtime_suspend() without matching pm_runtime_resume(). In case of DRM FIMC IPP driver, this will result in calling clk_disable() without respective call to clk_enable(). This patch removes call to pm_runtime_set_active() to ensure that pm_runtime_suspend/resume calls will match. Signed-off-by:
-
Andrzej Hajda authored
INT_EN cache field was updated only by mixer_enable_vblank. The patch adds update also by mixer_disable_vblank function. Signed-off-by:
-
Andrzej Hajda authored
Specification advises to clear vsync indicator before configuring vsync. Signed-off-by:
-
Andrzej Hajda authored
The driver used incorrect flags to clear interrupt status. The patch fixes it. Signed-off-by:
-
Andrzej Hajda authored
edid returned by drm_get_edid should be freed. The patch fixes it. Signed-off-by:
-
Hyungwon Hwang authored
The bits for rotation are not used as exclusively. So GSC_IN_ROT_270 can not be used for swap detection. The definition of it is same with GSC_IN_ROT_MASK. It is enough to check GSC_IN_ROT_90 bit is set or not to check whether width / height size swapping is needed. Signed-off-by:
-
- 14 Aug, 2015 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-amdkfd-next-fixes-2015-08-05' of git://people.freedesktop.org/~gabbayo/linux into drm-next Two small bug fixes for the code you pulled for 4.3: - Used a SHIFT define instead of a MASK define to check if a bit is turned on when destroying hqd. Luckily, this is in gfx7 interface file with amdgpu, which was used only for bring-up purposes of amdgpu, so no real effect on a running system - Used a logical AND instead of a bitwise AND operator, when initializing sdma virtual memory when using SDMA queues * tag 'drm-amdkfd-next-fixes-2015-08-05' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: fix bug when initializing sdma vm drm/amdgpu: fix bug when amdkfd destroys hqd
-
