Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a struct to hold the DMA descriptor data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move the freeing of the DMA channel and the buffers to
a helper function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The IRA and DMA are optional with this driver but both are required to
support async commands. Introduce a helper function to request the IRQ
and DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid IRQ or DMA channel or they cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently this function always transfers the full DMA buffer to the comedi
async buffer. When the cmd->stop_src == TRIG_COUNT the last DMA transfer
might be smaller than the buffer size. This results in invalid data being
added to the asunc buffer.

Add a 'size' member to the DMA descriptor and initialize it with the
actual size of the DMA transfer. Use that in pcl818_handle_dma() to
return the proper number of samples. Use the comedi_bytes_to_samples()
helper to convert the byte size to comedi samples. Remove the unnecessary
'bufptr' local variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a struct to hold the DMA descriptor data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, move the freeing of the DMA channel and the buffers to
a helper function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DMA is optional with this driver. Introduce a helper function to request
the DMA channel and allocate the buffers. Don't fail the driver attach
if the user passed an invalid DMA channel or the channel cannot be
requested.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DMA support is optional for the labpc driver. The return value from
labpc_init_dma_chan() is not even checked by the caller.

Change the return type to void and tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a struct to hold the DMA descriptor data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a struct to hold the DMA descriptor data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a helper function to free the DMA channel and
buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver requires an IRQ and DMA in order to support async commands.

For aesthetics, introduce a helper function to request the IRQ and DMA
channels and allocate the DMA buffer. Since the async command support
is optional, make the helper function handle any request/allocation
errors and allow the driver to still attach without async command support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, use the helper function to get the byte size of each sample
instead of using sizeof() the first buffer element.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...", the 'count' member of the private data does not need to
be volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a helper function to free the DMA channels and
allocated buffers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use dma_{alloc,free}_coherent() to allocate and free the DMA buffers.
This removes the dependancy on VIRT_TO_BUS.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor this function so that a for loop can be used to request and
set up the two DMA descriptors.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, introduce a struct to hold the DMA descriptor data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver can use DMA or the hardware FIFO to read analog input samples.
When DMA is enabled it's also possible for some async commands to cause
DMA to be disabled and the FIFO is used instead.

Currently the first DMA channels buffer is used for the bounce buffer
when using the FIFO. For aesthetics, add a new member to the private
data and use that for the FIFO bounce buffer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An IRQ and at least one DMA channel are required to use DMA with this driver.
Move the check to the caller to reduce the indent level of this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer uses virt_to_bus(). Remove the dependancy.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes following smatch warning:

drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:117
ieee80211_ADDBA() warn: variable dereferenced before check 'ieee' (see line 114)

As ieee can not be NULL at this point, all such checks are removed.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct redundant initialization reported by sparse
Signed-off-by: Rene Kolarik <rene.kolarik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl fix for
ERROR: space prohibited before that ',' (ctx:WxE)
Signed-off-by: Max Perepelitsyn <mperepelitsyn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a space coding style issue in 3-dimensional array initialization
which was found when running checkpatch.pl script on rtl819x_HTProc.c.
Signed-off-by: Gangadhar Vukkesala <gangs.freelancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes some functions that are not used anywhere:
update_ibss_network() rtllib_SignalStrengthTranslate()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes some functions that are not used anywhere:
rtl8192E_save_state() rtl8192E_enable_wake()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the function NULL_hdl() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removes some functions that are not used anywhere:
oid_rt_pro_h2c_get_rate_table_hdl() oid_rt_pro_h2c_set_rate_table_hdl()
oid_rt_pro_set_pwrstate_hdl() oid_rt_pro_qry_pwrstate_hdl()
oid_rt_pro_set_basic_rate_hdl() oid_rt_pro_set_power_tracking_hdl()
oid_rt_pro_set_data_rate_ex_hdl() oid_rt_pro_cfg_debug_message_hdl()
oid_rt_poll_rx_status_hdl() oid_rt_pro_set_rf_intfs_hdl()
oid_rt_wr_attrib_mem_hdl() oid_rt_rd_attrib_mem_hdl()
oid_rt_pro8711_pkt_loss_hdl() oid_rt_pro8711_wi_poll_hdl()
oid_rt_pro_write16_eeprom_hdl() oid_rt_pro_read16_eeprom_hdl()
oid_rt_pro_write_txcmd_hdl() oid_rt_pro_burst_write_register_hdl()
oid_rt_pro_burst_read_register_hdl() oid_rt_pro8711_join_bss_hdl()
oid_rt_pro_set_pkt_test_mode_hdl() oid_rt_pro_set_tx_agc_offset_hdl()
oid_rt_set_crystal_cap_hdl() oid_rt_pro_rw_efuse_pgpkt_hdl()
oid_rt_pro_rx_packet_type_hdl() oid_rt_pro_query_dr_variable_hdl()
oid_rt_pro_dele_sta_info_hdl() oid_rt_pro_add_sta_info_hdl()
oid_rt_pro_encryption_ctrl_hdl()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per checkpatch warning, removed an unnecessary else statement
proceeding an if statement with a return.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the function CAM_read_entry() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the function usb_writeN() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the function GetEEPROMSize8188E() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the function rtl8188e_set_rssi_cmd() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to r8190_rtl8256.c file that fixes space before , warning found by checkpatch.pl tool

Signed-off-by: Mohammad Jamal<md.jamalmohiuddin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>