1. 30 Oct, 2017 15 commits
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-4.15-arm64-dt' of... · a2c614a7
      Arnd Bergmann authored
      Merge tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
      
      Pull "arm64: tegra: Device tree changes for v4.15-rc1" from Thierry Reding:
      
      Enables host1x, VIC, PCIe and the BPMP thermal sensor on Tegra186.
      
      * tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
        arm64: tegra: Add BPMP thermal sensor to Tegra186
        arm64: tegra: Enable PCIe on Jetson TX2
        arm64: tegra: Add PCIe node for Tegra186
        arm64: tegra: Add VIC on Tegra186
        arm64: tegra: Add host1x on Tegra186
        arm64: tegra: Add #power-domain-cells for BPMP
      a2c614a7
    • Arnd Bergmann's avatar
      Merge tag 'renesas-arm64-dt2-for-v4.15' of... · 918c8223
      Arnd Bergmann authored
      Merge tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
      
      Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:
      
      * r8a7795 (H3) and r8a7796 (M3-W) SoCs
        - Use R-Car Gen 3 fallback compat string for GPIO
      
          Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
          compat strings in peace of now deprecated non-generation specific R-Car
          GPIO fallback compat string in the DT of Renesas ARM and arm64 based
          SoCs.
      
      * r8a7795 (H3) and r8a7796 (M3-W) Salvator boards
        - Add dr_mode property for USB2.0 channel 0
      
          Shimoda-san says "Since Salvator-X[S] have a USB2.0 dual-role channel
          (CN9), this patch
          adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
          as "otg".
      
          Using dual-role channel (or not) is related to the type of USB receptor
          on board specification. So, I added the property into the
          salvator-common.dtsi."
      
        - Add pfc node for USB3.0 channel 0
      
          Shimoda-san says "Since a R-Car Gen3 bootloader enables the PFC of
          USB3.0 channel 0, the USB3.0 host controller works without this setting
          on the kernel.  But, this setting should have salvator-common.dtsi. So,
          this patch adds the pfc node for USB3.0 channel 0."
      
      * r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB boards
        - Correct audio_clkout
      
          Morimoto-san says ""audio_clkout" is dummy clock of <&rcar_sound 0> to
          avoid clock loop which invites probe conflct. Thus <&rcar_sound 0> and
          "audio_clkout" should be same value."
      
      * r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB, and
        r8a77995 (D3) Draak boards
        - Drop "avb_phy_int" from avb_pins
      
          Shimoda-san says "Since the Ethernet AVB driver doesn't support
          AVB_PHY_INT handling and it will be handled by a phy driver as a gpio
          pin, this patch removes the "avb_phy_int" from the avb_pins node."
      
      * r8a77995 (D3) Draak board
        - Enable PWM channels
      
          Shimoda-san says "Each channel connects to LTC2644 for brightness
          control."
      
      * r8a77970 (V3M) Eagle and ULCB Kingfisher boards
        - Add initial device tree support
      
      * tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
        arm64: dts: renesas: salvator-common: add dr_mode property for USB2.0 channel 0
        arm64: dts: r8a7796: Use R-Car GPIO Gen3 fallback compat string
        arm64: dts: r8a7795: Use R-Car GPIO Gen3 fallback compat string
        arm64: renesas: ulcb: fixup audio_clkout
        arm64: renesas: salvator-common: fixup audio_clkout
        arm64: dts: renesas: eagle: add EtherAVB support
        arm64: dts: r8a77995: Add INTC-EX device node
        arm64: dts: r8a77970: Add INTC-EX device node
        arm64: dts: r8a7796: Add INTC-EX device node
        arm64: dts: ulcb-kf: hog USB3 hub control gpios
        arm64: dts: ulcb-kf: enable PCA9548 on I2C4
        arm64: dts: ulcb-kf: enable PCA9548 on I2C2
        arm64: dts: ulcb-kf: enable TCA9539 on I2C4
        arm64: dts: ulcb-kf: enable TCA9539 on I2C2
        arm64: dts: ulcb-kf: enable USB3.0 Host
        arm64: dts: ulcb-kf: enable PCIE0/1
        arm64: dts: ulcb-kf: enable USB2.0 Host channel 0
        arm64: dts: ulcb-kf: enable HSUSB
        arm64: dts: ulcb-kf: enable CAN0/1
        arm64: dts: ulcb-kf: enable SCIF1
        ...
      918c8223
    • Arnd Bergmann's avatar
      Merge tag 'uniphier-dt64-v4.15' of... · 11c3889c
      Arnd Bergmann authored
      Merge tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
      
      Pull "UniPhier ARM64 SoC DT updates for v4.15" from Masahiro Yamada:
      
      - add thermal monitor and thermal zone nodes
      - add efuse nodes
      - fix W=2 warnings
      - add GPIO controller nodes and related properties
      - add resets properties
      
      * tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
        arm64: dts: uniphier: add resets properties
        arm64: dts: uniphier: add eMMC hardware reset provider node
        arm64: dts: uniphier: add GPIO hog definition
        arm64: dts: uniphier: route on-board device IRQ to GPIO controller
        arm64: dts: uniphier: add GPIO controller nodes
        arm64: dts: uniphier: fix W=2 build warnings
        arm64: dts: uniphier: enable NAND for PXs3 reference board
        arm64: dts: uniphier: add efuse node for LD11, LD20, and PXs3
        arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20
      11c3889c
    • Arnd Bergmann's avatar
      Merge tag 'sunxi-dt64-for-4.15' of... · add5c42e
      Arnd Bergmann authored
      Merge tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
      
      Pull "Allwinner arm64 DT changes for 4.15" from Maxime Ripard:
      
      Most notable changes:
        - SPI and DMA support on the a64
        - New boards: NanoPi NEO Plus2
      
      * tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
        arm: allwinner: Correct unit name in devicetree binding example
        arm64: allwinner: a64: add dma controller references to spi nodes
        arm64: allwinner: a64: Add device node for DMA controller
        arm64: allwinner: a64: Fix node with unit name and no reg property
        arm64: allwinner: a64: Fix simple-bus unit address format error
        arm64: allwinner: h5: add NanoPi NEO Plus2 DT support
        arm64: allwinner: a64: add SPI nodes
      add5c42e
    • Arnd Bergmann's avatar
      Merge tag 'amlogic-dt-2' of... · 9f4fb208
      Arnd Bergmann authored
      Merge tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
      
      Pull "Amlogic 32-bit DT updates for v4.15, round 2" from Kevin Hilman:
      - enable new GPIO IRQ controller
      - add efuse node
      
      * tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
        ARM: dts: meson: add the efuse node
        ARM: dts: meson8b: enable gpio interrupt controller
        ARM: dts: meson8b: add support for booting the secondary CPU cores
        ARM: dts: meson8: add support for booting the secondary CPU cores
      9f4fb208
    • Arnd Bergmann's avatar
      Merge tag 'at91-ab-4.15-dt' of... · b3a87044
      Arnd Bergmann authored
      Merge tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
      
      Pull" ARM: at91: DT for 4.15" from Alexandre Belloni:
      
       - sama5d2 xplained: add charger and SD card power supply
       - sama5d27_som1_ek: many adjustments
       - at91sam9x25ek: add pwm0 and can1
      
      * tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
        ARM: dts: at91: at91sam9x5ek: use DMA for USART0
        ARM: dts: at91: at91sam9x25ek: add pwm0
        ARM: dts: at91: at91sam9x25ek: add CAN1 interface
        ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines
        ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0
        ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source
        ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines
        ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0
        ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0
        ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c
        ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source
        ARM: dts: at91: sama5d27_som1_ek: update serial aliases
        ARM: dts: at91: sama5d27_som1_ek: enable i2c2
        ARM: dts: at91: sama5d27_som1_ek: add disabled status
        ARM: dts: at91: usb_a9g20: fix rtc node
        ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply
        ARM: dts: at91: sama5d2_xplained: Add charger node
      b3a87044
    • Arnd Bergmann's avatar
      Merge tag 'imx-dt-4.15' of... · da7920e3
      Arnd Bergmann authored
      Merge tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
      
      Pull "i.MX device tree updates for 4.15" from Shawn Guo:
      
       - New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
         TX modules for MB7 from  Ka-Ro Electronics, i.MX6 Wandboard revd1
         variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
         Vining-2000 board.
       - Use the 'vpcie-supply' property for PCIe device for boards
         imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
       - A series from Jagan Teki to update imx6qdl-icore board with audio,
         touch and CAN support.
       - Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
         tempmon support for i.MX6UL.
       - A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
         and i.MX6 TX modules.
       - Fix DTC warnings in i.MX device trees, dropping leading zeros from
         unit address, correcting display nodes notation and display port
         names, fixing nodes with unit name and no reg property.
       - Other random device updates for various board support.
      
      * tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
        ARM: dts: imx53-tx53: fix interrupt flags
        ARM: dts: imx28-tx28: fix interrupt flags
        ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
        ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property
        ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property
        ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property
        ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property
        ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property
        ARM: dts: imx: add ZII RDU1 board
        ARM: dts: imx: add support for TX6 modules on MB7 baseboard
        ARM: dts: imx: add support for TX6QP
        ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
        ARM: dts: imx6-tx6: move display configuration to .dtsi file
        ARM: dts: imx6-tx6: add support for I2C bus recovery
        ARM: dts: imx6-tx6: convert to using simple-audio-card
        ARM: dts: imx6-tx6: specify ethernet phy reset post-delay
        ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
        ARM: dts: imx6-tx6: add trickle-charge config for DS1339
        ARM: dts: imx6-tx6: remove obsolete ipu1 alias
        ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
        ...
      
      [arnd: made sure we have no new leading zeroes in unit address during merge]
      da7920e3
    • Arnd Bergmann's avatar
      Merge tag 'uniphier-dt-v4.15' of... · 0292f8a8
      Arnd Bergmann authored
      Merge tag 'uniphier-dt-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
      
      Pull "UniPhier ARM SoC DT updates for v4.15" from Masahiro Yamada:
      
      - add thermal monitor and thermal zone nodes
      - fix W=2 warnings
      - add GPIO controller nodes and related properties
      - add resets properties
      
      * tag 'uniphier-dt-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
        ARM: dts: uniphier: add resets properties
        ARM: dts: uniphier: add GPIO hog definition
        ARM: dts: uniphier: route on-board device IRQ to GPIO controller
        ARM: dts: uniphier: add GPIO controller nodes
        ARM: dts: uniphier: fix W=2 build warnings
        ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2
      0292f8a8
    • Arnd Bergmann's avatar
      Merge tag 'amlogic-dt' of... · 2132910e
      Arnd Bergmann authored
      Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
      
      Pull "Amlogic 32-bit platforms: DT updates for v4.15"
      
      - add SDIO MMC controller
      - reserved memory fixes
      - SoC info driver nodes
      - enable USB host controller
      
      * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
        ARM: dts: meson: add the SDIO MMC controller
        ARM: dts: meson8b: add reserved memory zone to fix silent freezes
        ARM: dts: meson: add SoC information nodes
        dt-bindings: Amlogic: add documentation for the SoC info register areas
        ARM: dts: meson: fixing USB support on Meson6, Meson8 and Meson8b
        ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board
      2132910e
    • Arnd Bergmann's avatar
      Merge tag 'keystone_dts_for_4.15' of... · b51c5cb5
      Arnd Bergmann authored
      Merge tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
      
      Pull "ARM: Keystone DTS update for 4.15" from Santosh Shilimkar:
      
      - McASP support for K2G EVM
      - I2C support for K2G EVM
      - USB support for K2G EVM
      - SPI & SPI NOR flash support for K2G EVM
      - ECAP PWM support for K2G EVM
      
      * tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
        ARM: dts: keystone-k2g-evm: add bindings for SPI NOR flash
        ARM: dts: keystone-k2g: Add SPI nodes
        ARM: dts: keystone-k2g-evm: Enable PWM ECAP0
        ARM: dts: keystone-k2g: Add ECAP PWM DT nodes
        ARM: dts: k2g-evm: Enable USB 0 and 1
        ARM: dts: k2g: Add USB instances
        ARM: dts: keystone-k2g-evm: Add I2C EEPROM DT entry
        ARM: dts: keystone-k2g: Add I2C nodes
        ARM: dts: keystone-k2g: Add McASP nodes
      b51c5cb5
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux into next/dt · 877b203e
      Arnd Bergmann authored
      Pull "Broadcom devicetree changes for 4.15" from Florian Fainelli:
      
      This pull request contains Broadcom ARM-based Device Tree changes for 4.15,
      please pull the following:
      
      - Eric adds support for the CLCD and PWM controller on Cygnus chis
      
      - Loic fixes the console path on the Raspberry Pi 3 (already submitted as
        fixes) and then proceeds with enabling the BCM43438 bluetooth chip on
        the Raspberry Pi 3
      
      - Rafal specifies the USB ports on the Luxul XWR-1200
      
      - Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810
        and XAP-1440 both based on BCM53573
      
      - Florian adds support for the Broadcom Hurricane 2 SoC by adding general
        machine binding, clock binding, SoC DTS include file and a DTS for the
        Ubiquiti Networks UniFi Switch 8
      
      * tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux:
        ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8
        dt-bindings: Add Ubiquiti Networks vendor prefix
        ARM: dts: Add Broadcom Hurricane 2 DTS include file
        dt-bindings: Document Broadcom Hurricane 2 clocks
        dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
        ARM: dts: BCM53573: Add DT for Luxul XAP-1440
        ARM: dts: BCM53573: Add DT for Luxul XAP-810
        ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
        ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
        ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul XWR-1200
        ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave
        ARM: dts: bcm283x: Fix console path on RPi3
        ARM: dts: cygnus: Add the PWM node
        ARM: dts: cygnus: Add the CLCD controller
      877b203e
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-4.15-arm-dt' of... · d524dc30
      Arnd Bergmann authored
      Merge tag 'tegra-for-4.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
      
      Pull "ARM: tegra: Device tree changes for v4.15-rc1" from Thierry Reding:
      
      Adds support for the CEC controller found on Tegra124 and enables it on
      Tegra K1.
      
      * tag 'tegra-for-4.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
        ARM: tegra: Enable CEC support on Jetson TK1
        ARM: tegra: Add CEC support for Tegra124
      d524dc30
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-4.15-dt-bindings' of... · c4db01ed
      Arnd Bergmann authored
      Merge tag 'tegra-for-4.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
      
      Pull "dt-bindings: Updates for v4.15-rc1" from Thierry Reding:
      
      This contains the addition of a clock alias which will be used to fix
      the implementation of the SOR1 clock.
      
      Also included are the bindings for the Tegra186 BPMP thermal driver, a
      prerequisite for both the driver and device tree changes.
      
      * tag 'tegra-for-4.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
        dt-bindings: Add bindings for nvidia,tegra186-bpmp-thermal
        dt-bindings: clock: tegra: Add sor1_out clock
      c4db01ed
    • Arnd Bergmann's avatar
      Merge tag 'renesas-dt2-for-v4.15' of... · 6ac5482e
      Arnd Bergmann authored
      Merge tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
      
      Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:
      
      * r8a77430 (RZ/G1M) SoC
        - Add XHCI support to SoC DT. Boards may enable this as appropriate
      
      * All Renesas ARM based SoCs
        - Add missing clocks for ARM CPU cores
      
          Geert Uytterhoeven says "This series improves DT hardware descriptions
          for Renesas arm32 SoCs by adding missing clocks properties to the
          device nodes corresponding to ARM CPU cores."
      
      * R-Car Gen 1 and 2, and RZ/G SoCs
        - Use R-Car Fallback compat strings for GPIO
      
          Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
          compat strings in peace of now deprecated non-generation specific R-Car
          GPIO fallback compat string in the DT of Renesas ARM and arm64 based
          SoCs.
      
          As noted in the changelogs for the r8a777[89] changes, this introduces
          an incompatibility with pre-v4.14 kernels used with new DTBs. There is
          no run-time effect for other SoCs updated by this changeset."
      
      * r7s72100 (RZ/A1H) GR-Peach board
        - Add pin configuration subnode for ETHER pin group.
          This avoids relying on boot-loader configuration of these pins.
      
        - Enable ostm0 and ostm1 timers
      
          Jacopo Mondi says these are "to be used as clock source and clockevent
          source. The timers provides greater accuracy than the already enabled
          mtu2 one."
      
        - Correct leds node name indent
      
        - Enable MTU2 timer pulse unit
      
         Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is
         not enabled for GR-Peach board. The timer is used as clock event source
         to schedule wake-ups, and without this enabled all sleeps not performed
         through busy waiting hang the board."
      
      * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
        - Add USB function support
      
      * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
        - Add USB2.0 Host support
      
      * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
        - Rework DT architecture and add DT for camera DB
      
          Fabrizio Castro says "Some of the serial interfaces are exposed on the
          camera daughter board.  The camera daughter board can be connected to
          the carrier board by means of expansion connectors 1, 2 and 3. The
          carrier board may host an RZ/G1M or an RZ/G1N based SoM.
      
          While adding support for the serial interfaces on the camera daughter
          board we faced the dilemma of how to properly describe all of the
          possible HW configurations and how to maximize code reuse.
      
          The best option would be to use device tree overlays, however there is
          still some work to be done on that front before actually using them,
          therefore for the time being we decided to provide .dtsi files to
          describe the carrier board and the camera daughter board, and provide
          .dts files to describe the HW configurations we need to support."
      
      * r8a779[0-4] R-Car Gen2 SoCs
        - Use generic node name for VSP1 nodes
      
          Geert Uytterhoeven says "This patch series replaces the specific node
          names used for the VSP1 nodes by the preferred generic node names, cfr.
          commit 0e1bfb72 ("v4l: vsp1: Use generic node name")."
      
      * tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (42 commits)
        ARM: dts: r8a7743: Add xhci support to SoC dtsi
        ARM: dts: r7s72100: Add clock for CA9 CPU core
        dt-bindings: clk: r7s72100: Add missing I and G clocks
        ARM: dts: sh73a0: Add clocks for CA9 CPU cores
        ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core
        ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core
        ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core
        ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core
        ARM: dts: r8a7790: Add clocks for CA7 CPU cores
        ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores
        ARM: dts: r8a7779: Add clocks for CA9 CPU cores
        ARM: dts: r8a7778: Add clock for CA9 CPU core
        ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core
        ARM: dts: r8a73a4: Add clock for CA15 CPU0 core
        ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string
        ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string
        ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string
        ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string
        ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string
        ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string
        ...
      6ac5482e
    • Arnd Bergmann's avatar
      Merge tag 'sunxi-dt-for-4.15' of... · c0dec1ec
      Arnd Bergmann authored
      Merge tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
      
      Pull "Allwinner DT changes for 4.15" from Maxime Ripard:
      
      The most notable changes are:
        - Conversion to the last SoC (A10, A20) to the new clock framework
        - HDMI and dual pipeline support for the A10, A20 and A31 DRM driver
        - Support for the various power supplies on a number of boards
        - Fix of DTC warnings on a number of SoCs, but most of them still need
          some work
        - New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry,
          Banana Pi M2 Ultra
        - New R40 SoC support
      
      * tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (63 commits)
        ARM: sun8i: r40: enable USB host for Banana Pi M2 Ultra
        ARM: sun8i: v40: add 5V regulator for Banana Pi M2 Berry
        ARM: sun8i: r40: add 5V regulator for Banana Pi M2 Ultra
        ARM: sun8i: r40: add USB host port nodes for R40
        ARM: dts: sun4i: Enable HDMI support on some A10 devices
        ARM: dts: sun7i: Enable HDMI support on some A20 devices
        ARM: dts: sun7i: Add device nodes for display pipelines
        ARM: dts: sun4i: Add device nodes for display pipelines
        ARM: dts: sun8i: r40: add watchdog device node
        ARM: dts: sun5i: reference-design-tablet: Enable AXP209 AC and battery
        ARM: dts: sun9i: Change node names to remove underscores
        ARM: dts: sun9i: Change node names to remove underscores
        ARM: dts: sun4i: Remove underscores from nodes names
        ARM: dts: sun4i: Provide default muxing for relevant controllers
        ARM: dts: sun4i: Change pinctrl nodes to avoid warning
        ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices
        ARM: dts: sun6i: Add device node for HDMI controller
        ARM: dts: sun4i: Change LRADC node names to avoid warnings
        ARM: dts: sun4i: Remove skeleton and memory to avoid warnings
        ARM: dts: sun4i: Remove gpio-keys warnings
        ...
      c0dec1ec
  2. 29 Oct, 2017 4 commits
  3. 24 Oct, 2017 2 commits
  4. 23 Oct, 2017 19 commits