- 28 Jul, 2017 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.13-rc1. I have also included a couple of cleanup patches in this pull request for OMAP2+, related to the omap_hsmmc driver. The reason is because of the changes are also depending on OMAP SoC specific code, so this simplifies how to deal with this. Summary: MMC host: - sunxi: Correct time phase settings - omap_hsmmc: Clean up some dead code - dw_mmc: Fix message printed for deprecated num-slots DT binding - dw_mmc: Fix DT documentation" * tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: Documentation: dw-mshc: deprecate num-slots mmc: dw_mmc: fix the wrong condition check of getting num-slots from DT mmc: host: omap_hsmmc: remove unused platform callbacks ARM: OMAP2+: hsmmc.c: Remove dead code mmc: sunxi: Keep default timing phase settings for new timing mode
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "These iare the fixes for 4.13-rc3: vmwgfx, exynos, i915, amdgpu, nouveau, host1x and displayport fixes. As expected people woke up this week, i915 didn't do an -rc2 pull so got a bumper -rc3 pull, and Ben resurfaced on nouveau and fixed a bunch of major crashers seen on Fedora 26, and there are a few vmwgfx fixes as well. Otherwise exynos had some regression fixes/cleanups, and amdgpu has an rcu locking regression fix and a couple of minor fixes" * tag 'drm-fixes-for-v4.13-rc3' of git://people.freedesktop.org/~airlied/linux: (44 commits) drm/i915: Fix bad comparison in skl_compute_plane_wm. drm/i915: Force CPU synchronisation even if userspace requests ASYNC drm/i915: Only skip updating execobject.offset after error drm/i915: Only mark the execobject as pinned on success drm/i915: Remove assertion from raw __i915_vma_unpin() drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence drm/i915: Fix scaler init during CRTC HW state readout drm/i915/selftests: Fix an error handling path in 'mock_gem_device()' drm/i915: Unbreak gpu reset vs. modeset locking gpu: host1x: Free the IOMMU domain when there is no device to attach drm/i915: Fix cursor updates on some platforms drm/i915: Fix user ptr check size in eb_relocate_vma() drm: exynos: mark pm functions as __maybe_unused drm/exynos: select CEC_CORE if CEC_NOTIFIER drm/exynos/hdmi: fix disable sequence drm/exynos: mic: add a bridge at probe drm/exynos/dsi: Remove error handling for bridge_node DT parsing drm/exynos: dsi: do not try to find bridge drm: exynos: hdmi: make of_device_ids const. drm: exynos: constify mixer_match_types and *_mxr_drv_data. ...
-
Dave Airlie authored
Merge tag 'exynos-drm-fixes-for-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Summary: - fix probing fail issue of dsi driver without bridge device. - fix disable sequence of hdmi driver. - trivial cleanups. * tag 'exynos-drm-fixes-for-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: exynos: mark pm functions as __maybe_unused drm/exynos: select CEC_CORE if CEC_NOTIFIER drm/exynos/hdmi: fix disable sequence drm/exynos: mic: add a bridge at probe drm/exynos/dsi: Remove error handling for bridge_node DT parsing drm/exynos: dsi: do not try to find bridge drm: exynos: hdmi: make of_device_ids const. drm: exynos: constify mixer_match_types and *_mxr_drv_data. exynos_drm: Clean up duplicated assignment in exynos_drm_driver
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes i915 fixes for -rc3 Bit more than usual since we missed -rc2. 4x cc: stable, 2 gvt patches, but all fairly minor stuff. Last minute rebase was to add a few missing cc: stable, I did prep the pull this morning already and made sure CI approves. * tag 'drm-intel-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Fix bad comparison in skl_compute_plane_wm. drm/i915: Force CPU synchronisation even if userspace requests ASYNC drm/i915: Only skip updating execobject.offset after error drm/i915: Only mark the execobject as pinned on success drm/i915: Remove assertion from raw __i915_vma_unpin() drm/i915/cnl: Fix loadgen select programming on ddi vswing sequence drm/i915: Fix scaler init during CRTC HW state readout drm/i915/selftests: Fix an error handling path in 'mock_gem_device()' drm/i915: Unbreak gpu reset vs. modeset locking drm/i915: Fix cursor updates on some platforms drm/i915: Fix user ptr check size in eb_relocate_vma() drm/i915/gvt: Extend KBL platform support in GVT-g drm/i915/gvt: Fix the vblank timer close issue after shutdown VMs in reverse
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Core Changes: - dp: A few fixes in drm_dp_downstream_debug() (Chris) - rockchip: sanitize the Kconfig dependencies (fallout from EXTCON) (Arnd) - host1x: Free the iommu domain when attach_device fails (Paul) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Kocialkowski <contact@paulk.fr> * tag 'drm-misc-fixes-2017-07-27' of git://anongit.freedesktop.org/git/drm-misc: gpu: host1x: Free the IOMMU domain when there is no device to attach drm/rockchip: fix Kconfig dependencies drm/dp: Don't trust drm_dp_downstream_id() drm/dp: Fix read pointer for drm_dp_downsteam_debug()
-
- 27 Jul, 2017 29 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These are two fixups for the suspend-to-idle handling in the ACPI subsystem after recent changes in that area and two simple fixes of the ACPI NUMA code. Specifics: - Add an ACPI module parameter to allow users to override the new default behavior on some systems where the EC GPE is not disabled during suspend-to-idle in case the EC on their systems generates excessive wakeup events and they want to sacrifice some functionality (like power button wakeups) for extra battery life while suspended (Rafael Wysocki). - Fix flushing of the outstanding EC work in the ACPI core suspend-to-idle code (Rafael Wysocki). - Add a missing include and fix a messed-up comment in the ACPI NUMA code (Ross Zwisler)" * tag 'acpi-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: NUMA: Fix typo in the full name of SRAT ACPI: NUMA: add missing include in acpi_numa.h ACPI / PM / EC: Flush all EC work in acpi_freeze_sync() ACPI / EC: Add parameter to force disable the GPE on suspend -
Rafael J. Wysocki authored
* acpi-pm: ACPI / PM / EC: Flush all EC work in acpi_freeze_sync() ACPI / EC: Add parameter to force disable the GPE on suspend * acpi-numa: ACPI: NUMA: Fix typo in the full name of SRAT ACPI: NUMA: add missing include in acpi_numa.h
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
gvt-fixes-2017-07-26 - Turn on KBL support for more SKUs (Jianjun) - Fix vblank timer close bug (Fred) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170726075621.hrauvik62gi2jecj@zhen-hp.sh.intel.com
-
Maarten Lankhorst authored
ddb_allocation && ddb_allocation / blocks_per_line >= 1 is the same as ddb_allocation >= blocks_per_line, so use the latter to simplify this. This fixes the following compiler warning: drivers/gpu/drm/i915/intel_pm.c:4467]: (warning) Comparison of a boolean expression with an integer other than 0 or 1. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d555cb58 ("drm/i915/skl+: use linetime latency if ddb size is not available") Cc: "Mahesh Kumar" <mahesh1.kumar@intel.com> Reported-by:
David Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+ Reviewed-by:
Mahesh Kumar <mahesh1.kumar@intel.com> (cherry picked from commit 54d20ed1) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170717111355.4523-1-maarten.lankhorst@linux.intel.comSigned-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Chris Wilson authored
The goal here was to minimise doing any thing or any check inside the kernel that was not strictly required. For a userspace that assumes complete control over the cache domains, the kernel is usually using outdated information and may trigger clflushes where none were required. However, swapping is a situation where userspace has no knowledge of the domain transfer, and will leave the object in the CPU cache. The kernel must flush this out to the backing storage prior to use with the GPU. As we use an asynchronous task tracked by an implicit fence for this, we also need to cancel the ASYNC flag on the object so that the object will wait for the clflush to complete before being executed. This also absolves userspace of the responsibility imposed by commit 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") that its needed to ensure that the object was out of the CPU cache prior to use on the GPU. Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101571Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by:
Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170721145037.25105-5-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
I was being overly paranoid in not updating the execobject.offset after performing the fallback copy where we set reloc.presumed_offset to -1. The thinking was to ensure that a subsequent NORELOC execbuf would be forced to process the invalid relocations. However this is overkill so long as we *only* update the execobject.offset following a successful update of the relocation value witin the batch. If we have to repeat the execbuf due to a later interruption, then we may skip the relocations on the second pass (honouring NORELOC) since the execobject.offset match the actual offsets (even though reloc.presumed_offset is garbage). Subsequent calls to execbuf with NORELOC should themselves ensure that the reloc.presumed_offset have been corrected in case of future migration. Reporting back the actual execobject.offset, even when reloc.presumed_offset is garbage, ensures that reuse of those objects use the latest information to avoid relocations. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101635Signed-off-by:
-
Chris Wilson authored
If we fail to acquire a fence (for old school fenced GPU access) then we unwind the vma reservation, including its pin. However, we were making the execobject as holding the pin before erring out, leading to a double unpin: [ 3193.991802] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:287! [ 3193.998131] invalid opcode: 0000 [#1] PREEMPT SMP [ 3194.002816] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers ptp pps_core [last unloaded: i915] [ 3194.022841] CPU: 0 PID: 8123 Comm: kms_flip Tainted: G U 4.13.0-rc1-CI-CI_DRM_471+ #1 [ 3194.031765] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A04 11/05/2007 [ 3194.040343] task: ffff8800785d4c40 task.stack: ffffc90001768000 [ 3194.046339] RIP: 0010:eb_release_vmas.isra.6+0x119/0x180 [i915] [ 3194.052234] RSP: 0018:ffffc9000176ba80 EFLAGS: 00010246 [ 3194.057439] RAX: 00000000000003c0 RBX: ffff8800710fc2d8 RCX: ffff8800588e4f48 [ 3194.064546] RDX: ffffffff1fffffff RSI: 00000000ffffffff RDI: ffff8800588e00d0 [ 3194.071654] RBP: ffffc9000176bab0 R08: 0000000000000000 R09: 0000000000000000 [ 3194.078761] R10: 0000000000000040 R11: 0000000000000001 R12: ffff880060822f00 [ 3194.085867] R13: 0000000000000310 R14: 00000000000003b8 R15: ffffc9000176bbb0 [ 3194.092975] FS: 00007fd2b94aba40(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 [ 3194.101033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3194.106754] CR2: 00007ffbec3ff000 CR3: 0000000074e67000 CR4: 00000000000006f0 [ 3194.113861] Call Trace: [ 3194.116321] eb_relocate_slow+0x67/0x4e0 [i915] [ 3194.120861] i915_gem_do_execbuffer+0x429/0x1260 [i915] [ 3194.126070] ? lock_acquire+0xb5/0x210 [ 3194.129803] ? __might_fault+0x39/0x90 [ 3194.133563] i915_gem_execbuffer2+0x9b/0x1b0 [i915] [ 3194.138447] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.143478] drm_ioctl_kernel+0x64/0xb0 [ 3194.147298] drm_ioctl+0x2cd/0x390 [ 3194.150710] ? i915_gem_execbuffer+0x2b0/0x2b0 [i915] [ 3194.155741] ? finish_task_switch+0xa5/0x210 [ 3194.159993] ? finish_task_switch+0x6a/0x210 [ 3194.164247] do_vfs_ioctl+0x90/0x670 [ 3194.167806] ? entry_SYSCALL_64_fastpath+0x5/0xb1 [ 3194.172492] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.177176] ? trace_hardirqs_on_caller+0xe7/0x1c0 [ 3194.181946] SyS_ioctl+0x3c/0x70 [ 3194.185159] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 3194.189756] RIP: 0033:0x7fd2b76a8587 [ 3194.193314] RSP: 002b:00007fff074845b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 3194.200855] RAX: ffffffffffffffda RBX: ffffffff8146da43 RCX: 00007fd2b76a8587 [ 3194.207962] RDX: 00007fff074846e0 RSI: 0000000040406469 RDI: 0000000000000003 [ 3194.215068] RBP: ffffc9000176bf88 R08: 0000000000000000 R09: 0000000000000003 [ 3194.222175] R10: 00007fd2b796bb58 R11: 0000000000000246 R12: 00007fff07484880 [ 3194.229280] R13: 0000000000000003 R14: 0000000040406469 R15: 0000000000000000 [ 3194.236386] ? __this_cpu_preempt_check+0x13/0x20 [ 3194.241070] Code: 24 b0 00 00 00 48 85 c9 0f 84 6c ff ff ff 8b 41 20 85 c0 7e 73 83 e8 01 89 41 20 41 8b 84 24 e8 00 00 00 a8 0f 0f 85 5f ff ff ff <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d f3 c3 49 8b 84 [ 3194.259943] RIP: eb_release_vmas.isra.6+0x119/0x180 [i915] RSP: ffffc9000176ba80 [ 3194.268047] ---[ end trace 1d7348c6575d8800 ]--- [ 3673.658819] softdog: Initiating panic [ 3673.662471] Kernel panic - not syncing: Software Watchdog Timer expired [ 3673.669066] Kernel Offset: disabled [ 3673.672541] Rebooting in 1 seconds.. Reported-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by:
-
Chris Wilson authored
After we detect a i915_vma pin overflow, we call __i915_vma_unpin to cleanup. However, on an overflow the pin_count bitfield will be zero, triggering an assertion, even though we the intention is to merely warn and report the error back to the user (as historically the culprit has be a leak in the display code). Fixes: 20dfbde4 ("drm/i915: Wrap vma->pin_count accessors with small inline helpers") Signed-off-by:
-
Navare, Manasi D authored
The condition for setting the Loadgen Select bit of PORT_TX_DW4 register during DDI Vswing Sequence should be Bit rate <=6 GHz whereas the existing code checks only Bit Rate < 6GHz. This patch fixes this condition. While at it also remove the redundant paranthesis. Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Imre Deak authored
The scaler allocation code depends on a non-zero default value for the crtc scaler_id, so make sure we initialize the scaler state accordingly even if the crtc is off. This fixes at least an initial YUV420 modeset (added in a follow-up patchset by Shashank) when booting with the screen off: after the initial HW readout and modeset which enables the scaler a subsequent modeset will disable the scaler which isn't properly allocated. This results in a funky HW state where the pipe scaler HW registers can't be modified and the normally black screen is grey and shifted to the right or jitters. The problem was revealed by Shashank's YUV420 patchset and first reported by Ville. v2: - In the stable tag also include versions which need backporting (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chandra Konduru <chandra.konduru@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # 4.2.x Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: a1b2278e ("drm/i915: skylake panel fitting using shared scalers") Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Christophe JAILLET authored
Goto the right label in case of error, otherwise there is a leak. This has been introduced by c5cf9a91. In this patch a goto has not been updated. Fixes: c5cf9a91 ("drm/i915: Create a kmem_cache to allocate struct i915_priolist from") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20170719223503.30580-1-christophe.jaillet@wanadoo.frReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Daniel Vetter authored
Taking the modeset locks unconditionally isn't the greatest idea, because atm that part is still broken and times out (and then atomic keels over). And there's really no reason to do so, the old code didn't do that either. To make the patch a bit simpler let's also nuke 2 cases that are only around for the old mmioflip paths. Atomic nonblocking workers will not die (minus bugs) when a gpu reset happens. And of course this doesn't fix any of the gpu reset vs. modeset deadlock fun, but it at least stop modern CI machines from keeling over all over the place for no reason at all. And we still have the explicit testcases to run the fake gpu reset, so coverage isn't that much worse. v2: Split out additional changes on top, restrict this to purely reducing the critical section of modeset locks. v2: Review from Maarten - update comments - don't oops when state is NULL in intel_finish_reset, but try to at least still drop locks properly. The hw is going to be toast anyway. Fixes: 73974893 ("drm/i915: Fix modeset handling during gpu reset, v5.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - The majority of lines changed are due to regenerated defconfig files. - The support for the Page Deallocation Table (PDT) which was merged in the merge window for 4.13 contained a bug which crashes the kernel if a bad page is reported by firmware. This is now fixed and the kernel messages will show which memory slot holds the broken DIMM. - Commit 3a166fc2 ("kbuild: handle libs-y archives separately from built-in.o archives") broke linking the parisc kernel due to millicode symbols which can't be reached then any longer. This was fixed by modifying the parisc vmlinux.lds linker script. - If the stack checker panics on stack overflow, avoid recursive panics. - Some parisc machines can't physically power off and thus instead start after some time to flood the console by presumably detected soft lockups. Avoid this by disabling the lockup detectors before entering the endless for-next loop. - Dave Anglin provided fixes which prevents TLB speculation on flushed pages on PA8800/PA9000 CPUs. - Arvind Yadav sent a trivial patch to constify the attribute_group structure in our firmware on-board-flash storage driver (pdc_stable.c) * 'parisc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Extend disabled preemption in copy_user_page parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases parisc: Suspend lockup detectors before system halt parisc: Show DIMM slot number which holds broken memory module parisc: Add function to return DIMM slot of physical address parisc: Fix crash when calling PDC_PAT_MEM PDT firmware function parisc: regenerate defconfig files parisc: pdc_stable: constify attribute_group structures. parisc: Merge millicode routines via linker script parisc: Disable further stack checks when panic occurs during stack check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This is a pretty boring pull request, containing a few HD-audio quirks and ID updates as usual suspects, as well as a fix for a regression of FM801 chip on ia64 (what a legacy combination!)" * tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add mute led support for HP ProBook 440 G4 ALSA: hda/realtek - No loopback on ALC225/ALC295 codec ALSA: hda/realtek - Update headset mode for ALC225 ALSA: fm801: Initialize chip after IRQ handler is registered ALSA: hda/realtek - Update headset mode for ALC298 ALSA: hda - Add missing NVIDIA GPU codec IDs to patch table
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Two areas addressed by these fixes: - Fixes from Dave Martin for the signal frames that were broken with certain configurations. No one noticed until recently. - More kexec fixes to ensure that the crashkernel region is correctly allocated, and a fix for the location of the device tree when several kexec kernels are loaded" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8687/1: signal: Fix unparseable iwmmxt_sigframe in uc_regspace[] ARM: 8686/1: iwmmxt: Add missing __user annotations to sigframe accessors ARM: kexec: fix failure to boot crash kernel ARM: kexec: avoid allocating crashkernel region outside lowmem -
Paul Kocialkowski authored
When there is no device to attach to the IOMMU domain, as may be the case when the device-tree does not contain the proper iommu node, it is best to keep going without IOMMU support rather than failing. This allows the driver to probe and function instead of taking down all of the tegra drm driver, leading to missing display support. Signed-off-by:
Paul Kocialkowski <contact@paulk.fr> Fixes: 404bfb78 ("gpu: host1x: Add IOMMU support") Reviewed-by:
Mikko Perttunen <mperttunen@nvidia.com> Tested-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170710193305.5987-1-contact@paulk.fr
-
Shawn Lin authored
dwmmc host driver already deprecate it in the driver but didn't modify the documentation to reflect the fact. This patch deprecates it and clean up num-slots from the examples of all variant host drivers. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Acked-by:
Rob Herring <robh@kernel.org> Fixes: d30a8f7b ("mmc: dw_mmc: deprecated the "num-slots" property") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org>
-
Shawn Lin authored
Change to print the information about when the deprecated "num-slots" DT binding is being used, as to avoid confusion when browsing the log: dwmmc_rockchip fe320000.dwmmc: 'num-slots' was deprecated. Signed-off-by:
-
Ville Syrjälä authored
Turns out that just writing CURPOS isn't sufficient to move the cursor on some platforms. My 830 works just fine, but eg. 945 and PNV don't. On those platforms we need to arm even the CURPOS update with a CURBASE write. Even worse, a write to any of the cursor register apart from CURBASE will cancel an already pending cursor update. So if we have armed a CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank would cancel that armed update. Thus we're left with a cursor that doesn't appear to move, or even change shape. Fix the problem by always performing the CURBASE write after a CURPOS write. Bspec is somewhat unclear which platforms actually require this CURBASE write and which don't. So to keep it simple and to make sure we really fix the problem across all supported devices, let's just perform the CURBASE write unconditionally. Cc: Paul Menzel <pmenzel@molgen.mpg.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790 Fixes: 75343a44 ("drm/i915: Drop useless posting reads from cursor commit") Signed-off-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Imre Deak authored
Fix the sizeof(ptr) vs. sizeof(*ptr) typo. Fixes: 2889caa9 ("drm/i915: Eliminate lots of iterations over the execobjects array") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
The rework of the exynos DRM clock handling introduced warnings for configurations that have CONFIG_PM disabled: drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function] static void hdmi_clk_disable_gates(struct hdmi_context *hdata) ^~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function] static int hdmi_clk_enable_gates(struct hdmi_context *hdata) The problem is that the PM functions themselves are inside of an #ifdef, but some functions they call are not. This patch removes the #ifdef and instead marks the PM functions as __maybe_unused, which is a more reliable way to get it right. Link: https://patchwork.kernel.org/patch/8436281/ Fixes: 9be7e989 ("drm/exynos/hdmi: clock code re-factoring") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Hans Verkuil authored
If the s5p-cec driver is a module and the drm exynos driver is built-in, then the CEC core will be a module also, causing the CEC notifier to fail (will be compiled as empty functions). To prevent this select CEC_CORE if CEC_NOTIFIER is set to ensure the CEC core is also built into the kernel. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Andrzej Hajda authored
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely powered off and for example Odroid-U3 cannot disable TV power domain when HDMI cable is unplugged. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order") Tested-by:
-
Inki Dae authored
This patch moves drm_bridge_add call into probe. It doesn't need to call drm_bridge_add call every time bind callback is called. Changelog v2 - moved drm_bridge_remove call into remove callback. - corrected description. Suggested-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by:
-
Hoegeun Kwon authored
Remove the error handling of bridge_node because the bridge_node is optional. For example, In case of Exynos SoC, a bridge device such as mDNIe and MIC could be placed between Display Controller and MIPI DSI device but the bridge device is optional. Signed-off-by:
-
Inki Dae authored
It doesn't need to try to find a bridge if bridge node doesn't exist. Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Tested-by:
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 12294 1192 0 13486 34ae drivers/gpu/drm/exynos/exynos_hdmi.o File size after constify hdmi_match_types. text data bss dec hex filename 13318 176 0 13494 34b6 drivers/gpu/drm/exynos/exynos_hdmi.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
-
Arvind Yadav authored
File size before: text data bss dec hex filename 9983 1424 0 11407 2c8f drivers/gpu/drm/exynos/exynos_mixer.o File size after constify: text data bss dec hex filename 11231 176 0 11407 2c8f drivers/gpu/drm/exynos/exynos_mixer.o Signed-off-by:
-
Gabriel Krisman Bertazi authored
num_ioctls is already assigned when declaring the exynos_drm_driver structure. No need to duplicate it here. Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by:
-
- 26 Jul, 2017 5 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Three misc amd fixes. * 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: fix AVFS voltage offset for Vega10 drm/amdgpu/gfx9: simplify and fix GRBM index selection drm/amdgpu: Fix blocking in RCU critical section(v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes and cleanups from Michael Tsirkin: "Fixes some minor issues all over the codebase" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-net: fix module unloading virtio-balloon: coding format cleanup virtio-balloon: deflate via a page list virtio_blk: Use sysfs_match_string() helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small fixes. The transfer size fixes are actually correcting some performance drops on the hpsa and smartpqi cards. The cards actually have an internal cache for request speed up but bypass it for transfers > 1MB. Since 4.3 the efficiency of our merges has rendered the cache mostly unused, so limit transfers to under 1MB to recover the cache boost" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fix static checker warning in sg_is_valid_dxfer scsi: smartpqi: limit transfer length to 1MB scsi: hpsa: limit transfer length to 1MB
-
git://git.infradead.org/users/hch/uuidLinus Torvalds authored
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
-
- 25 Jul, 2017 1 commit
-
-
John David Anglin authored
It's always bothered me that we only disable preemption in copy_user_page around the call to flush_dcache_page_asm. This patch extends this to after the copy. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by:
Helge Deller <deller@gmx.de>
-
