Skip to content

L
linux
Switch branch/tag
  1. 26 Aug, 2009 3 commits
    • Eric Sandeen's avatar
      ext4: use ext4_grpblk_t more extensively · a36b4498
      Eric Sandeen authored 
      unsigned  short is potentially too small to track blocks within
a group; today it is safe due to restrictions in e2fsprogs but
we have _lo / _hi bits for group blocks with the intent to go
up to 32 bits, so clean this up now.

There are many more places where we use unsigned/int/unsigned int
to contain a group block but this should at least fix all the
short types.

I added a few comments to the struct ext4_group_info definition
as well.
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      a36b4498
    • Eric Sandeen's avatar
      ext4: use variables not types in sizeofs() for allocations · 1927805e
      Eric Sandeen authored 
      Precursor to changing some types; to keep things in sync, it 
seems better to allocate/memset based on the size of the 
variables we are using rather than on some disconnected 
basic type like "unsigned short"
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
      1927805e
    • Aneesh Kumar K.V's avatar
      ext4: Add missing unlock_new_inode() call in extent migration code · a8526e84
      Aneesh Kumar K.V authored 
      We need to unlock the new inode before iput.  This patch fixes the
following warning when calling chattr +e to migrate a file to use
extents.  It also fixes problems in when e4defrag attempts to
defragment an inode.

[  470.400044] ------------[ cut here ]------------
[  470.400065] WARNING: at fs/inode.c:1210 generic_delete_inode+0x65/0x16a()
[  470.400072] Hardware name: N/A
.....
...
[  470.400353] Pid: 4451, comm: chattr Not tainted 2.6.31-rc7-red-debug #4
[  470.400359] Call Trace:
[  470.400372]  [<ffffffff81037771>] warn_slowpath_common+0x77/0x8f
[  470.400385]  [<ffffffff81037798>] warn_slowpath_null+0xf/0x11
[  470.400395]  [<ffffffff810b7f28>] generic_delete_inode+0x65/0x16a
[  470.400405]  [<ffffffff810b8044>] generic_drop_inode+0x17/0x1bd
[  470.400413]  [<ffffffff810b7083>] iput+0x61/0x65
[  470.400455]  [<ffffffffa003b229>] ext4_ext_migrate+0x5eb/0x66a [ext4]
[  470.400492]  [<ffffffffa002b1f8>] ext4_ioctl+0x340/0x756 [ext4]
[  470.400507]  [<ffffffff810b1a91>] vfs_ioctl+0x1d/0x82
[  470.400517]  [<ffffffff810b1ff0>] do_vfs_ioctl+0x483/0x4c9
[  470.400527]  [<ffffffff81059c30>] ? trace_hardirqs_on+0xd/0xf
[  470.400537]  [<ffffffff810b2087>] sys_ioctl+0x51/0x74
[  470.400549]  [<ffffffff8100ba6b>] system_call_fastpath+0x16/0x1b
[  470.400557] ---[ end trace ab85723542352dac ]---
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      a8526e84
  3. 18 Aug, 2009 7 commits
    • Eric Sandeen's avatar
      ext4: Add feature set check helper for mount & remount paths · a13fb1a4
      Eric Sandeen authored 
      A user reported that although his root ext4 filesystem was mounting
fine, other filesystems would not mount, with the:

"Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF"

error on his 32-bit box built without CONFIG_LBDAF.  This is because
the test at mount time for this situation was not being re-checked
on remount, and the normal boot process makes an ro->rw transition,
so this was being missed.

Refactor to make a common helper function to test the filesystem
features against the type of mount request (RO vs. RW) so that we 
stay consistent.

Addresses Red-Hat-Bugzilla: #517650
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      a13fb1a4
    • Eric Sandeen's avatar
      simplify some logic in ext4_mb_normalize_request · 38877f4e
      Eric Sandeen authored 
      While reading through some of the mballoc code it seems that a couple
spots in the size normalization function could be streamlined.

The test for non-overlapping PAs can be or'd for the start & end
conditions, and the tests for adjacent PAs can be else-if'd - 
it's essentially independently testing:

	if (A + B <= C)
		...
	if (A > C)
		...

These cannot both be true so it seems like the else-if might
be slightly more efficient and/or informative.
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      38877f4e
    • Eric Sandeen's avatar
      ext4: open-code ext4_mb_update_group_info · 0373130d
      Eric Sandeen authored 
      ext4_mb_update_group_info is only called in one place, and it's
extremely simple.  There's no reason to have it in a separate function
in a separate file as far as I can tell, it just obfuscates what's
really going on.

Perhaps it was intended to keep the grp->bb_* manipulation local to
mballoc.c but we're already accessing other grp-> fields in balloc.c
directly so this seems ok.
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      0373130d
    • Eric Sandeen's avatar
      ext4: reject too-large filesystems on 32-bit kernels · bf43d84b
      Eric Sandeen authored 
      ext4 will happily mount a > 16T filesystem on a 32-bit box, but
this is not safe; writes to the block device will wrap past 16T
and the page cache can't index past 16T (232 index * 4k pages).

Adding another test to the existing "too many sectors" test
should do the trick.

Add a comment, a relevant return value, and fix the reference
to the CONFIG_LBD(AF) option as well.
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      bf43d84b
    • H Hartley Sweeten's avatar
      jbd2: bitfields should be unsigned · 0ccff1a4
      H Hartley Sweeten authored 
      This fixes sparse noise:
  error: dubious one-bit signed bitfield
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@ucw.cz>
      0ccff1a4
    • Jan Kara's avatar
      ext4: Fix possible deadlock between ext4_truncate() and ext4_get_blocks() · 487caeef
      Jan Kara authored 
      During truncate we are sometimes forced to start a new transaction as
the amount of blocks to be journaled is both quite large and hard to
predict. So far we restarted a transaction while holding i_data_sem
and that violates lock ordering because i_data_sem ranks below a
transaction start (and it can lead to a real deadlock with
ext4_get_blocks() mapping blocks in some page while having a
transaction open).

We fix the problem by dropping the i_data_sem before restarting the
transaction and acquire it afterwards. It's slightly subtle that this
works:

1) By the time ext4_truncate() is called, all the page cache for the
truncated part of the file is dropped so get_block() should not be
called on it (we only have to invalidate extent cache after we
reacquire i_data_sem because some extent from not-truncated part could
extend also into the part we are going to truncate).

2) Writes, migrate or defrag hold i_mutex so they are stopped for all
the time of the truncate.

This bug has been found and analyzed by Theodore Tso <tytso@mit.edu>.
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      487caeef
    • Jan Kara's avatar
      jbd2: Annotate transaction start also for jbd2_journal_restart() · 9599b0e5
      Jan Kara authored 
      lockdep annotation for a transaction start has been at the end of
jbd2_journal_start(). But a transaction is also started from
jbd2_journal_restart(). Move the lockdep annotation to start_this_handle()
which covers both cases.
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      9599b0e5
  5. 18 Sep, 2009 1 commit
  7. 01 Sep, 2009 1 commit
    • Mingming's avatar
      ext4: Compile warning fix when EXT_DEBUG enabled · 84fe3bef
      Mingming authored 
      When EXT_DEBUG is enabled I received the following compile warning on
PPC64:

  CC [M]  fs/ext4/inode.o
  CC [M]  fs/ext4/extents.o
fs/ext4/extents.c: In function ‘ext4_ext_rm_leaf’:
fs/ext4/extents.c:2097: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘ext4_lblk_t’
fs/ext4/extents.c: In function ‘ext4_ext_get_blocks’:
fs/ext4/extents.c:2789: warning: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘long unsigned int’
fs/ext4/extents.c:2852: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘ext4_lblk_t’
fs/ext4/extents.c:2953: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘unsigned int’
  CC [M]  fs/ext4/migrate.o

The patch fixes compile warning.
Signed-off-by: default avatarMingming Cao <cmm@us.ibm.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>

Index: linux-2.6.31-rc4/fs/ext4/extents.c
===================================================================
      84fe3bef
  9. 18 Sep, 2009 1 commit
    • Theodore Ts'o's avatar
      ext4: Avoid group preallocation for closed files · 50797481
      Theodore Ts'o authored 
      Currently the group preallocation code tries to find a large (512)
free block from which to do per-cpu group allocation for small files.
The problem with this scheme is that it leaves the filesystem horribly
fragmented.  In the worst case, if the filesystem is unmounted and
remounted (after a system shutdown, for example) we forget the fact
that wee were using a particular (now-partially filled) 512 block
extent.  So the next time we try to allocate space for a small file,
we will find *another* completely free 512 block chunk to allocate
small files.  Given that there are 32,768 blocks in a block group,
after 64 iterations of "mount, write one 4k file in a directory,
unmount", the block group will have 64 files, each separated by 511
blocks, and the block group will no longer have any free 512
completely free chunks of blocks for group preallocation space.

So if we try to allocate blocks for a file that has been closed, such
that we know the final size of the file, and the filesystem is not
busy, avoid using group preallocation.
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      50797481
  11. 10 Aug, 2009 1 commit
    • Theodore Ts'o's avatar
      ext4: Fix bugs in mballoc's stream allocation mode · 4ba74d00
      Theodore Ts'o authored 
      The logic around sbi->s_mb_last_group and sbi->s_mb_last_start was all
screwed up.  These fields were getting unconditionally all the time,
set even when stream allocation had not taken place, and if they were
being used when the file was smaller than s_mb_stream_request, which
is when the allocation should _not_ be doing stream allocation.

Fix this by determining whether or not we stream allocation should
take place once, in ext4_mb_group_or_file(), and setting a flag which
gets used in ext4_mb_regular_allocator() and ext4_mb_use_best_found().
This simplifies the code and assures that we are consistently using
(or not using) the stream allocation logic.
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      4ba74d00
  13. 09 Aug, 2009 1 commit
  15. 18 Sep, 2009 1 commit
  17. 11 Aug, 2009 3 commits
  19. 28 Jul, 2009 1 commit
  21. 06 Jul, 2009 2 commits
  23. 17 Jul, 2009 2 commits
    • Curt Wohlgemuth's avatar
      ext4: More buffer head reference leaks · 6487a9d3
      Curt Wohlgemuth authored 
      After the patch I posted last week regarding buffer head ref leaks in
no-journal mode, I looked at all the code that uses buffer heads and
searched for more potential leaks.

The patch below fixes the issues I found; these can occur even when a
journal is present.

The change to inode.c fixes a double release if
ext4_journal_get_create_access() fails.

The changes to namei.c are more complicated.  add_dirent_to_buf() will
release the input buffer head EXCEPT when it returns -ENOSPC.  There are
some callers of this routine that don't always do the brelse() in the event
that -ENOSPC is returned.  Unfortunately, to put this fix into ext4_add_entry()
required capturing the return value of make_indexed_dir() and
add_dirent_to_buf().
Signed-off-by: default avatarCurt Wohlgemuth <curtw@google.com>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      6487a9d3
    • Jan Kara's avatar
      jbd2: Fail to load a journal if it is too short · f6f50e28
      Jan Kara authored 
      Due to on disk corruption, it can happen that journal is too short. Fail
to load it in such case so that we don't oops somewhere later.
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
      f6f50e28
  25. 28 Jul, 2009 2 commits
  27. 17 Jul, 2009 1 commit
  29. 16 Sep, 2009 13 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7