- 25 Jun, 2018 18 commits
-
-
Ravi Bangoria authored
'perf script' in piped mode is crashing because evsel->priv is not set properly. Fix it. Before: # perf record -o - -- ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) # After: # perf record -o - -- ls | perf script <SNIP 'ls' output> ls 2282 1031.731974: 250000 cpu-clock:uhH: 7effe4b3d29e ls 2282 1031.732222: 250000 cpu-clock:uhH: 7effe4b3a650 # Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a14390fd ("perf script: Allow creating per-event dump files") Link: http://lkml.kernel.org/r/20180625124220.6434-3-ravi.bangoria@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
A few fields are missing in a perf script -F hint. Add them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20180625124220.6434-2-ravi.bangoria@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Currently we can hit following assert when running numa bench: $ perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0cm --thp 1 perf: bench/numa.c:1577: __bench_numa: Assertion `!(!(((wait_stat) & 0x7f) == 0))' failed. The assertion is correct, because we hit the SIGFPE in following line: Thread 2.2 "thread 0/0" received signal SIGFPE, Arithmetic exception. [Switching to Thread 0x7fffd28c6700 (LWP 11750)] 0x000.. in worker_thread (__tdata=0x7.. ) at bench/numa.c:1257 1257 td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; We don't check if the runtime is actually bigger than 1 second, and thus this might end up with zero division within FPU. Adding the check to prevent this. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180620094036.17278-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Thomas Richter authored
'perf stat' shows a mismatch in perf stat regarding counter names on s390: Run command: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 573146 573146 tx_nc_tend: 1 573146 573146 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.001037252 seconds time elapsed [root@s35lp76 perf]# shows transaction counter tx_nc_tend with value 3 but it was triggered only once as seen by the output of mytesttx. When looking up the event name tx_nc_tend the following function sequence is called: parse_events_multi_pmu_add() +--> perf_pmu__scan() being called with NULL argument +--> pmu_read_sysfs() scans directory ../devices/ for all PMUs +--> perf_pmu__find() tries to find a PMU in the global pmu list. +--> pmu_lookup() called to read all file entries when not in global list. pmu_lookup() causes the issue. It calls +---> pmu_aliases() to read all the entries in the PMU directory. On s390 this is named /sys/devices/cpum_cf/events. +--> pmu_aliases_parse() reads all files and creates an alias for each file name. So we end up with first entry created by reading the sysfs file [root@s35lp76 perf]# cat /sys/devices/cpum_cf /events/TX_NC_TEND event=0x008d [root@s35lp76 perf]# Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ After all files in this directory have been read and aliases created this function is called: +--> pmu_add_cpu_aliases() This function looks up the CPU tables created by the json files. With json files for s390 now available all the aliases are added to the PMU alias list a second time. The second entry is added by reading the json file converted by jevent resulting in file pmu-events/pmu-events.c: { .name = "tx_nc_tend", .event = "event=0x8d", .desc = "Unit: cpum_cf Completed TEND \ instructions \ in non-constrained TX mode", .topic = "extended", .long_desc = "A TEND instruction has \ completed in a \ non-constrained \ transactional-execution mode", .pmu = "cpum_cf", }, Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use __perf_pmu__new_alias() to add an alias to the PMU alias list. There is no check if an alias already exist So we end up with 2 entries for tx_nc_tend in the PMU alias list. Having set up the PMU alias list for this PMU now parse_events_multi_add_pmu() reads the complete alias list and adds each alias with parse_events_add_pmu() to the global perfev_list. This causes the alias to be added multiple times to the event list. Fix this by making __perf_pmu__new_alias() to merge alias definitions if an alias is already on the alias list. Also print a debug message when the alias has mismatches in some fields. Output before: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Output after: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 1 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180615101105.47047-3-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Thomas Richter authored
PMU alias definitions in sysfs files may have spaces, newlines and numbers with leading zeroes. Some alias definitions may also appear in JSON files without spaces, etc. Scan alias definitions and remove leading zeroes, spaces, newlines, etc and rebuild string to make alias->str member comparable. s390 for example has terms specified as event=0x0091 (read from files ../<PMU>/events/<FILE> and terms specified as event=0x91 (read from JSON files). Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180615101105.47047-2-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Thomas Richter authored
Remove a trailing newline when reading sysfs file contents such as /sys/devices/cpum_cf/events/TX_NC_TEND. This shows when verbose option -v is used. Output before: tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ Output after: tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180615101105.47047-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Yonghong Song authored
Arnaldo reported the perf build failure with latest llvm/clang compiler (7.0). $ make LIBCLANGLLVM=1 -C tools/perf/ <SNIP> CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)’: util/c++/clang.cpp:150:43: error: no matching function for call to ‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&, llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’ TargetMachine::CGFT_ObjectFile)) { ^ In file included from util/c++/clang.cpp:25:0: /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate: virtual bool llvm::TargetMachine::addPassesToEmitFile( llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&, llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool, llvm::MachineModuleInfo*) virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &, ^~~~~~~~~~~~~~~~~~~ /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate expects 6 arguments, 3 provided mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101: /tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1 make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2 make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2 make[5]: *** Waiting for unfinished jobs.... CC /tmp/tmp.t53Qo38zci/tests/thread-map.o The function addPassesToEmitFile signature changed in llvm 7.0 and such a change caused the failure. This patch fixed the issue with using proper function signatures under different compiler versions. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Yonghong Song <yhs@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20180616174739.1076733-1-yhs@fb.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the rename in: bd3a08aa ("bpf: flowlabel in bpf_fib_lookup should be flowinfo") Silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zd1sgtbybtjrrt7bqdybu0s0@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
The IFLA_BRPORT_ISOLATED and IFLA_VXLAN_TTL_INHERIT defines were added in: 7d850abd ("net: bridge: add support for port isolation") 72f6d71e ("vxlan: add ttl inherit support") Pick them, silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Leblond <eric@regit.org> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Link: https://lkml.kernel.org/n/tip-ezi5u0mmdqm0wfm0y2y8176r@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
This updates the tools/perf/ copy of the powerpc file used to generate the syscall table file used to make 'perf trace' become aware of the new 'rseq' syscall, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. From this commit: bb862b02 ("powerpc: Wire up restartable sequences system call") Silencing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-adtgz6u3apd76tghiu9w0k19@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
This updates the tools/perf/ copy of the system call table for x86 which makes 'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. These are the csets introducing the source drift: 05c17ced ("x86: Wire up restartable sequence system call") 7a074e96 ("aio: implement io_pgetevents") This results in this build time change: $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300 @@ -332,5 +332,7 @@ [330] = "pkey_alloc", [331] = "pkey_free", [332] = "statx", + [333] = "io_pgetevents", + [334] = "rseq", }; -#define SYSCALLTBL_x86_64_MAX_ID 332 +#define SYSCALLTBL_x86_64_MAX_ID 334 $ This silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-tfvyz51sabuzemrszbrhzxni@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick up the new ioctls added in these csets: 7595bda2 ("drm: Add DRM client cap for aspect-ratio") The DRM caps are not yet being decoded in 'perf trace', so this sync doesn't incur in any change in behaviour in any tools, just silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-atwz0arwanq1npu8pptwkoxt@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
Use a 64-bit type so that the cycle count is not limited to 32-bits. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1528371002-8862-1-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Adding optional 'valid' callback for events tests in parse-events object, so we don't try to parse PMUs, which are not supported. Following line is displayed for skipped test: running test 52 'intel_pt//u'... SKIP Committer note: Use named initializers in the struct evlist_test variable to avoid breaking the build on centos:5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1817: error: missing initializer tests/parse-events.c:1817: error: (near initialization for 'e.type') Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Add missing error handling for parse_events calls in test_event function that led to following segfault on s390: running test 52 'intel_pt//u' perf: Segmentation fault ... /lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106] /lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96] ./perf(parse_events_add_pmu+0xb8) [0x80132088] ./perf(parse_events_parse+0xc62) [0x8019529a] ./perf(parse_events+0x98) [0x801341c0] ./perf(test__parse_events+0x48) [0x800cd140] ./perf(cmd_test+0x26a) [0x800bd44a] test child interrupted Adding the struct parse_events_error argument to parse_events call. Also adding parse_events_print_error to get more details on the parsing failures, like: # perf test 6 -v running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?' event syntax error: 'intel_pt//u' \___ Cannot find PMU `intel_pt'. Missing kernel support? Committer note: Use named initializers in the struct parse_events_error variable to avoid breaking the build on centos5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_event': tests/parse-events.c:1696: error: missing initializer tests/parse-events.c:1696: error: (near initialization for 'err.str') Reported-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20180611093422.1005-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Sandipan Das authored
For some cases, the callchain provided by the kernel may be empty. So, the callchain ip filtering code will cause a crash if we do not check whether the struct ip_callchain pointer is NULL before accessing any members. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf record -b -e cycles:u ls Before: # perf report --branch-history perf: Segmentation fault -------- backtrace -------- perf[0x1027615c] linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8] perf(arch_skip_callchain_idx+0x44)[0x10257c58] perf[0x1017f2e4] perf(thread__resolve_callchain+0x124)[0x1017ff5c] perf(sample__resolve_callchain+0xf0)[0x10172788] ... After: # perf report --branch-history Samples: 25 of event 'cycles:u', Event count (approx.): 2306870 Overhead Source:Line Symbol Shared Object + 11.60% _init+35736 [.] _init ls + 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so + 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so + 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so + 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so + 8.83% _init+236 [.] _init ls ... Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180611104049.11048-1-sandipan@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Thomas Richter authored
On s390 this test case fails because the socket identifiction numbers assigned to the CPU are higher than the CPU identification numbers. F/ix this by adding the platform architecture into the perf data header flag information. This helps identifiing the test platform and handles s390 specifics in process_cpu_topology(). Before: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-iUv755 socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# After: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-8X8VTs CPU 0, core 0, socket 6 CPU 1, core 1, socket 3 ---- end ---- Session topology: Ok [root@p23lp27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: c84974ed ("perf test: Add entry to test cpu topology") Link: http://lkml.kernel.org/r/20180611073153.15592-2-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Thomas Richter authored
On s390 the socket identifier assigned to a CPU identifier is random and (depending on the configuration of the LPAR) may be higher than the CPU identifier. This is currently not supported. Fix this by allowing arbitrary socket identifiers being assigned to CPU id. Output before: [root@p23lp27 perf]# ./perf report --header -I -v ... socket_id number is too big.You may need to upgrade the perf tool. Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # Core ID and Socket ID information is not available ... [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf report --header -I -v ... Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # CPU 0: Core ID 0, Socket ID 6 # CPU 1: Core ID 1, Socket ID 3 # CPU 2: Core ID -1, Socket ID -1 ... [root@p23lp27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180611073153.15592-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 Jun, 2018 1 commit
-
-
Mathieu Malaterre authored
When building perf with W=1 the following warning triggers: CC kernel/events/ring_buffer.o kernel/events/ring_buffer.c:105:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static bool __always_inline ^~~~~~ ... Move the inline keyword to the beginning of the function declaration. Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: trival@kernel.org Link: http://lkml.kernel.org/r/20180308202856.9378-1-malat@debian.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 21 Jun, 2018 1 commit
-
-
Oleg Nesterov authored
insn_get_length() has the side-effect of processing the entire instruction but only if it was decoded successfully, otherwise insn_complete() can fail and in this case we need to just return an error without warning. Reported-by: syzbot+30d675e3ca03c1c351e7@syzkaller.appspotmail.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: syzkaller-bugs@googlegroups.com Link: https://lkml.kernel.org/lkml/20180518162739.GA5559@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 14 Jun, 2018 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-4.18-20180611' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo: perf stat: - Fix metric column header display alignment (Jiri Olsa) - Improve error messages for default attributes, providing better output for error in command lines such as: $ perf stat -T Cannot set up transaction events event syntax error: '..cycles,cpu/cycles-t/,cpu/tx-start/,cpu/el-start/,cpu/cycles-ct/}' \___ unknown term Where the "event syntax error" line now appears (Jiri Olsa) - Add --interval-clear option, to provide a 'watch' like printing (Jiri Olsa) perf script: - Show hw-cache events too (Seeteena Thoufeek) perf c2c: - Fix data dependency problem in layout of 'struct c2c_hist_entry', where its member 'struct hist_entry' must be at the end because it has a ZLA as its last member, that gets space when handling callchains (Jiri Olsa) Core: - We cannot assume that a 'struct perf_evsel' is to be obtained from a container_of operation on a 'struct hists' as there are tools, such as 'perf c2c' that uses 'struct hist' instances without having them in container structs that also have 'struct perf_evsel' in a particular layout, so provide a different way of figuring out if a 'struct hists' and 'struct hist_entry' have callchains (Arnaldo Carvalho de Melo) - Fix error index in the PMU event parser, so that error messages can point to the problematic token (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 Jun, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti updates from Thomas Gleixner: "Three small commits updating the SSB mitigation to take the updated AMD mitigation variants into account" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Switch the selection of mitigation from CPU vendor to CPU features x86/bugs: Add AMD's SPEC_CTRL MSR usage x86/bugs: Add AMD's variant of SSB_NO
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull more perf tooling updates from Thomas Gleixner: "Perf tool updates and fixes: perf stat: - Display user and system time for workload targets (Jiri Olsa) perf record: - Enable arbitrary event names thru name= modifier (Alexey Budankov) PowerPC: - Add a python script for hypervisor call statistics (Ravi Bangoria) Intel PT: (Adrian Hunter) - Fix sync_switch INTEL_PT_SS_NOT_TRACING - Fix decoding to accept CBR between FUP and corresponding TIP - Fix MTC timing after overflow - Fix "Unexpected indirect branch" error perf test: - record+probe_libc_inet_pton: - To get the symbol table for dynamic shared objects on ubuntu we need to pass the -D/--dynamic command line option, unlike with the fedora distros (Arnaldo Carvalho de Melo) - code-reading: - Fix perf_env setup for PTI entry trampolines (Adrian Hunter) - kmod-path: - Add tests for vdso32 and vdsox32 (Adrian Hunter) - Use header file util/debug.h (Thomas Richter) perf annotate: - Make the various UI backends (stdio, TUI, gtk) use more consistently structs with annotation options as specified by the user (Arnaldo Carvalho de Melo) - Move annotation specific knobs from the symbol_conf global kitchen sink to the annotation option structs (Arnaldo Carvalho de Melo) perf script: - Add more PMU fields to python scripts event handler dict (Jin Yao) Core: - Fix misleading error for some unparsable events mentioning PMUs when those are not involved in the problem (Jiri Olsa) - Consider BSS symbols when processing /proc/kallsyms ('B' and 'b') (Arnaldo Carvalho de Melo) - Be more robust when trying to use per-symbol histograms, checking for unlikely but possible cases where the space for the histograms wasn't allocated, print a debug message for such cases (Arnaldo Carvalho de Melo) - Fix symbol and object code resolution for vdso32 and vdsox32 (Adrian Hunter) - No need to check for null when passing pointers to foo__get() style refcount grabbing helpers, just like in the kernel and with free(), its safe to pass a NULL pointer to avoid having to check it before each and every foo__get() call (Arnaldo Carvalho de Melo) - Remove some dead code (quote.[ch]) (Arnaldo Carvalho de Melo) - Remove some needless globals, making them local (Arnaldo Carvalho de Melo) - Reduce usage of symbol_conf.use_callchain, using other means of finding out if callchains are in use or available for specific events, as we evolved this codebase to allow requesting callchains for just a subset of the monitored events. In time it will help polish recording and showing mixed sets accross the various tools: perf record -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions' (Arnaldo Carvalho de Melo) - Consider PTI entry trampolines in map__rip_2objdump() (Adrian Hunter)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) perf script python: Add dict fields introduction to Documentation perf script python: Add more PMU fields to event handler dict perf script python: Move dsoname code to a new function perf symbols: Add BSS symbols when reading from /proc/kallsyms perf annnotate: Make __symbol__inc_addr_samples handle src->histograms == NULL perf intel-pt: Fix "Unexpected indirect branch" error perf intel-pt: Fix MTC timing after overflow perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING perf script powerpc: Python script for hypervisor call statistics perf test record+probe_libc_inet_pton: Ask 'nm' for dynamic symbols perf map: Consider PTI entry trampolines in rip_2objdump() perf test code-reading: Fix perf_env setup for PTI entry trampolines perf tools: Fix pmu events parsing rule perf stat: Display user and system time perf record: Enable arbitrary event names thru name= modifier perf tools: Fix symbol and object code resolution for vdso32 and vdsox32 perf tests kmod-path: Add tests for vdso32 and vdsox32 perf hists: Check if a hist_entry has callchains before using them perf hists: Introduce hist_entry__has_callchain() method ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Two small fixlets: - Add the missing iomu mapping call in the Freescale/NXP/Qualcomm/ whoever owns it now/ SCFG MSI irqchip driver. Otherwise IRQs wont work at all. - Fix a SMP=n build warning in the STM32 irq chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ls-scfg-msi: Map MSIs in the iommu irqchip/stm32: Fix non-SMP build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "A small set of core updates: - Make objtool cope with GCC8 oddities some more - Remove a stale local_irq_save/restore sequence in the signal code along with the stale comment in the RCU code. The underlying issue which led to this has been solved long time ago, but nobody cared to cleanup the hackarounds" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: signal: Remove no longer required irqsave/restore rcu: Update documentation of rcu_read_unlock() objtool: Fix GCC 8 cold subfunction detection for aliased functions
-
Anna-Maria Gleixner authored
Commit a841796f ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf910 ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf910 ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
-
Anna-Maria Gleixner authored
Since commit b4abf910 ("rtmutex: Make wait_lock irq safe") the explanation in rcu_read_unlock() documentation about irq unsafe rtmutex wait_lock is no longer valid. Remove it to prevent kernel developers reading the documentation to rely on it. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-2-anna-maria@linutronix.de
-
- 09 Jun, 2018 11 commits
-
-
Linus Torvalds authored
Merge proc_cmdline simplifications. This re-writes the get_mm_cmdline() logic to be rather simpler than it used to be, and makes the semantics for "cmdline goes past the end of the original area" more natural. You _can_ use prctl(PR_SET_MM) to just point your command line somewhere else entirely, but the traditional model is to just edit things in place and that still needs to continue to work. At least this way the code makes some sense. * proc-cmdline: fs/proc: simplify and clarify get_mm_cmdline() function fs/proc: re-factor proc_pid_cmdline_read() a bit
-
Mikulas Patocka authored
Use the error code EUCLEAN for filesystem errors because other filesystems use this code too. [ And remove unused EMEMERROR - Linus ] Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: - bq27xxx: Add BQ27426 support - ab8500: Drop AB8540/9540 support - Introduced new usb_type property - Properly document the power-supply ABI - misc. cleanups and fixes * tag 'for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: MAINTAINERS: add entry for LEGO MINDSTORMS EV3 power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed" power: supply: axp288_fuel_gauge: Remove polling from the driver power: supply: axp288_fuelguage: Do not bind when the fg function is not used power: supply: axp288_charger: Do not bind when the charge function is not used power: supply: axp288_charger: Support 3500 and 4000 mA input current limit power: supply: s3c-adc-battery: fix driver data initialization power: supply: charger-manager: Verify polling interval only when polling requested power: supply: sysfs: Use enum to specify property power: supply: ab8500: Drop AB8540/9540 support power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge" power: supply: simplify getting .drvdata power: supply: bq27xxx: Add support for BQ27426 gpio-poweroff: Use gpiod_set_value_cansleep
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI update from Sebastian Reichel: "Just one patch for the HSI subsystem this time: use the new vm_fault_t return type" * tag 'hsi-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: clients: Change return type to vm_fault_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD updates from Shaohua Li: "A few fixes of MD for this merge window. Mostly bug fixes: - raid5 stripe batch fix from Amy - Read error handling for raid1 FailFast device from Gioh - raid10 recovery NULL pointer dereference fix from Guoqing - Support write hint for raid5 stripe cache from Mariusz - Fixes for device hot add/remove from Neil and Yufen - Improve flush bio scalability from Xiao" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix lock contention for flush bios md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe md/raid1: add error handling of read error from FailFast device md: fix NULL dereference of mddev->pers in remove_and_add_spares() raid5: copy write hint from origin bio to stripe md: fix two problems with setting the "re-add" device state. raid10: check bio in r10buf_pool_free to void NULL pointer dereference md: fix an error code format and remove unsed bio_sector
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc updates from David Miller: - a FPE signal fix that was also merged upstream - privileged ADI driver from Tom Hromatka * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix compat siginfo ABI regression selftests: sparc64: char: Selftest for privileged ADI driver char: sparc64: Add privileged ADI driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds authored
Pull IDE updates from David Miller: "Primarily IRQ disabling avoidance changes from Sebastian Andrzej Siewior" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: don't enable/disable interrupts in force threaded-IRQ mode ide: don't disable interrupts during kmap_atomic() ide: Handle irq disabling consistently alim15x3: move irq-restore before pci_dev_put()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO updates from Greg KH: "Here is the big staging and IIO driver update for 4.18-rc1. It was delayed as I wanted to make sure the final driver deletions did not cause any major merge issues, and all now looks good. There are a lot of patches here, just over 1000. The diffstat summary shows the major changes here: 1007 files changed, 16828 insertions(+), 227770 deletions(-) Because of this, we might be close to shrinking the overall kernel source code size for two releases in a row. There was loads of work in this release cycle, primarily: - tons of ks7010 driver cleanups - lots of mt7621 driver fixes and cleanups - most driver cleanups - wilc1000 fixes and cleanups - lots and lots of IIO driver cleanups and new additions - debugfs cleanups for all staging drivers - lots of other staging driver cleanups and fixes, the shortlog has the full details. but the big user-visable things here are the removal of 3 chunks of code: - ncpfs and ipx were removed on schedule, no one has cared about this code since it moved to staging last year, and if it needs to come back, it can be reverted. - lustre file system is removed. I've ranted at the lustre developers about once a year for the past 5 years, with no real forward progress at all to clean things up and get the code into the "real" part of the kernel. Given that the lustre developers continue to work on an external tree and try to port those changes to the in-kernel tree every once in a while, this whole thing really really is not working out at all. So I'm deleting it so that the developers can spend the time working in their out-of-tree location and get things cleaned up properly to get merged into the tree correctly at a later date. Because of these file removals, you will have merge issues on some of these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the atomisp driver). Just delete those files, it's a simple merge :) All of this has been in linux-next for a while with no reported problems" * tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits) staging: ipx: delete it from the tree ncpfs: remove uapi .h files ncpfs: remove Documentation ncpfs: remove compat functionality staging: ncpfs: delete it staging: lustre: delete the filesystem from the tree. staging: vc04_services: no need to save the log debufs dentries staging: vc04_services: vchiq_debugfs_log_entry can be a void * staging: vc04_services: remove struct vchiq_debugfs_info staging: vc04_services: move client dbg directory into static variable staging: vc04_services: remove odd vchiq_debugfs_top() wrapper staging: vc04_services: no need to check debugfs return values staging: mt7621-gpio: reorder includes alphabetically staging: mt7621-gpio: change gc_map to don't use pointers staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property staging: mt7621-gpio: update #interrupt-cells for the gpio node staging: mt7621-gpio: dt-bindings: complete documentation for the gpio staging: mt7621-dts: add missing properties to gpio node ...
-
Tony Luck authored
New stepping of Skylake has fixes for cache occupancy and memory bandwidth monitoring. Update the code to enable these by default on newer steppings. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org # v4.14 Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Link: https://lkml.kernel.org/r/20180608160732.9842-1-tony.luck@intel.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...
-