There exists a bug in which the driver is unable to exit overflow
promiscuous mode after having added "too many" mac filters.  It is
expected that after triggering overflow promiscuous, removing the
failed/extra filters should then disable overflow promiscuous mode.

The bug exists because we were intentionally skipping the sync_vsi_filter
path in cases where we were removing failed filters since they shouldn't
have been added to the firmware in the first place, however we still
need to go through the sync_vsi_filter code path to determine whether or
not it is ok to exit overflow promiscuous mode.  This patch fixes the
bug by making sure we go through the sync_vsi_filter path in cases of
failed filters.

Change-ID: I634d249ca3e5fa50729553137c295e73e7722143
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

sk_page_frag_refill() allocates either a compound page or an order-0
page. We can use page_ref_inc() which is slightly faster than get_page()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: accommodate sequence number to a peer's shrunk receive window caused by precision loss in window scaling

Prevent sending out a left-shifted sequence number from a Linux sender in
response to a peer's shrunk receive-window caused by losing least significant
bits in window-scaling.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Cheng Cui <Cheng.Cui@netapp.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: misc. fixes

Three largely unrelated fixes to increase robustness in rare edge cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

efx_start_all can return without initialising queues as a reset is pending.
 This means that when netif_device_attach is called, the kernel can start
 sending traffic without having an initialised TX queue to send to.
This patch avoids this by not calling netif_device_attach if there is a
 pending reset.

Fixes: e283546c ("sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the hw doesn't think they exist, we should defer to its authority.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On EF10, hardware filter IDs are 13 bits, but in some places we store
 32-bit "full filter IDs" in which higher order bits encode the filter
 match-priority.  This could cause a filter to have a full filter ID of
 0xffff, which is also the value EFX_EF10_FILTER_ID_INVALID which we use
 in 16-bit "short" filter IDs (without match-priority bits).  This would
 occur if the hardware filter ID was 0x1fff and the match-priority was 7.
Unfortunately, some code that checks for EFX_EF10_FILTER_ID_INVALID can
 be called on full filter IDs, and will WARN_ON if this ever happens.
So, since we have plenty of spare bits in the full filter ID, this patch
 shifts the priority bits left one bit when constructing the full filter
 IDs, ensuring that the 0x2000 bit of a full filter ID will always be 0
 and thus no full filter ID can ever equal EFX_EF10_FILTER_ID_INVALID.

This patch also replaces open-coded full<->short filter ID conversions
 with calls to functions, thus keeping the definition of the full filter
 ID format in one place.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I got a warning about broken code on ARM64 with 64K pages:

drivers/net/vmxnet3/vmxnet3_drv.c: In function 'vmxnet3_rq_init':
drivers/net/vmxnet3/vmxnet3_drv.c:1679:29: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
    rq->buf_info[0][i].len = PAGE_SIZE;

'len' here is a 16-bit integer, so this clearly won't work. I don't think
this driver is used much on anything other than x86, so there is no need
to fix this properly and we can work around it with a Kconfig dependency
to forbid known-broken configurations. qemu in theory supports it on
other architectures too, but presumably only for compatibility with x86
guests that also run on vmware.

CONFIG_PAGE_SIZE_64KB is used on hexagon, mips, sh and tile, the other
symbols are architecture-specific names for the same thing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is required to build it as a module.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function rds_ib_xmit_atomic, ib_ring is not allocated
successfully. As such, it is not necessary to unalloc it.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use PCI_DEVICE_ID_NETRONOME_NFP*, defined in linux/pci_ids.h,
rather than replicating the same values in the NFP driver.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The qdisc_stab_lock is used in qdisc_get_stab and qdisc_put_stab.
These two functions are invoked in qdisc_create, qdisc_change, and
qdisc_destroy which run fully under RTNL.

So it already makes sure only one could access the qdisc_stab_list at
the same time. Then it is unnecessary to use qdisc_stab_lock now.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change module filename from af-rxrpc.ko to rxrpc.ko so as to be consistent
with the other protocol drivers.

Also adjust the documentation to reflect this.

Further, there is no longer a standalone rxkad module, as it has been
merged into the rxrpc core, so get rid of references to that.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Return the correct tx_errors stats in netvsc.
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When allocating rtnl dump messages, struct ifla_port_vsi is never dumped,
so we can save header plus payload in rtnl_port_size(). Infact, attribute
IFLA_PORT_VSI_TYPE and struct ifla_port_vsi are not used anywhere in
the kernel. We only need to keep the nla policy should applications in
user space be filling this out. Same NLA_BINARY issue exists as was fixed
in 364d5716 ("rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY")
and others, but then again IFLA_PORT_VSI_TYPE is not used anywhere, so
just add a comment that it's unused.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

added_by_external_learn fdb entries are added and expired by
external entities like switchdev driver or external controllers.
ageing is already disabled for such entries. Hence, don't
indicate expiry for such fdb entries.

CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Misc BPF improvements

This last series for this window adds various misc
improvements to BPF, one is to mark registered map and
prog types as __ro_after_init, another one for removing
cBPF stubs in eBPF JITs and moving the stub to the core
and last also improving JITs is to make generated images
visible to the kernel and kallsyms, so they can be
seen in traces. For details, please have a look at the
individual patches.

Thanks a lot!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Long standing issue with JITed programs is that stack traces from
function tracing check whether a given address is kernel code
through {__,}kernel_text_address(), which checks for code in core
kernel, modules and dynamically allocated ftrace trampolines. But
what is still missing is BPF JITed programs (interpreted programs
are not an issue as __bpf_prog_run() will be attributed to them),
thus when a stack trace is triggered, the code walking the stack
won't see any of the JITed ones. The same for address correlation
done from user space via reading /proc/kallsyms. This is read by
tools like perf, but the latter is also useful for permanent live
tracing with eBPF itself in combination with stack maps when other
eBPF types are part of the callchain. See offwaketime example on
dumping stack from a map.

This work tries to tackle that issue by making the addresses and
symbols known to the kernel. The lookup from *kernel_text_address()
is implemented through a latched RB tree that can be read under
RCU in fast-path that is also shared for symbol/size/offset lookup
for a specific given address in kallsyms. The slow-path iteration
through all symbols in the seq file done via RCU list, which holds
a tiny fraction of all exported ksyms, usually below 0.1 percent.
Function symbols are exported as bpf_prog_<tag>, in order to aide
debugging and attribution. This facility is currently enabled for
root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening
is active in any mode. The rationale behind this is that still a lot
of systems ship with world read permissions on kallsyms thus addresses
should not get suddenly exposed for them. If that situation gets
much better in future, we always have the option to change the
default on this. Likewise, unprivileged programs are not allowed
to add entries there either, but that is less of a concern as most
such programs types relevant in this context are for root-only anyway.
If enabled, call graphs and stack traces will then show a correct
attribution; one example is illustrated below, where the trace is
now visible in tooling such as perf script --kallsyms=/proc/kallsyms
and friends.

Before:

  7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux)
         f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so)

After:

  7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux)
  [...]
  7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux)
  7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux)
         f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the dummy bpf_jit_compile() stubs for eBPF JITs and make
that a single __weak function in the core that can be overridden
similarly to the eBPF one. Also remove stale pr_err() mentions
of bpf_jit_compile.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All map types and prog types are registered to the BPF core through
bpf_register_map_type() and bpf_register_prog_type() during init and
remain unchanged thereafter. As by design we don't (and never will)
have any pluggable code that can register to that at any later point
in time, lets mark all the existing bpf_{map,prog}_type_list objects
in the tree as __ro_after_init, so they can be moved to read-only
section from then onwards.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 34a5102c ("net: bgmac: allocate struct bgmac just once
& don't copy it") the mac_addr member of struct bgmac is no longer
necessary to pass the MAC address to bgmac_enet_probe(). Instead it can
directly be stored in netdev->dev_addr.

Also use eth_hw_addr_random() instead of eth_random_addr() in case a
random MAC is nedded. This will make sure netdev->addr_assign_type will
be properly set.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2017-02-16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.11

Mostly small fixes, not really any new features.

Major changes:

ath10k

* when trying older firmware versions don't confuse user with error messages

ath9k

* fix crash in AP mode (regression)
* fix relayfs crash (regression)
* fix initialisation with AR9340 and AR9550
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use eth_hw_addr_random() to set a random dev_addr and update
addr_assign_type instead of open-coding it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Handle table allocation failure during insertion

v2 -

Added Ack to patch 2.
Fixed RCU annotation in code path executed by rehasher by using
rht_dereference_bucket.

v1 -

This series tackles the problem of table allocation failures during
insertion.  The issue is that we cannot vmalloc during insertion.
This series deals with this by introducing nested tables.

The first two patches removes manual hash table walks which cannot
work on a nested table.

The final patch introduces nested tables.

I've tested this with test_rhashtable and it appears to work.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds code that handles GFP_ATOMIC kmalloc failure on
insertion.  As we cannot use vmalloc, we solve it by making our
hash table nested.  That is, we allocate single pages at each level
and reach our desired table size by nesting them.

When a nested table is created, only a single page is allocated
at the top-level.  Lower levels are allocated on demand during
insertion.  Therefore for each insertion to succeed, only two
(non-consecutive) pages are needed.

After a nested table is created, a rehash will be scheduled in
order to switch to a vmalloced table as soon as possible.  Also,
the rehash code will never rehash into a nested table.  If we
detect a nested table during a rehash, the rehash will be aborted
and a new rehash will be scheduled.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two problems with the function tipc_sk_reinit.  Firstly
it's doing a manual walk over an rhashtable.  This is broken as
an rhashtable can be resized and if you manually walk over it
during a resize then you may miss entries.

Secondly it's missing memory barriers as previously the code used
spinlocks which provide the barriers implicitly.

This patch fixes both problems.

Fixes: 07f6c4bc ("tipc: convert tipc reference table to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function glock_hash_walk walks the rhashtable by hand.  This
is broken because if it catches the hash table in the middle of
a rehash, then it will miss entries.

This patch replaces the manual walk by using the rhashtable walk
interface.

Fixes: 88ffbf3e ("GFS2: Use resizable hash table for glocks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mvneta_eth_tool_ops is only used internally in mvneta driver, so
make it static.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
net/sched: Reflect HW offload status in classifiers

Currently there is no way of querying whether a filter is
offloaded to HW or not when using "both" policy (where none
of skip_sw or skip_hw flags are set by user-space).

Added two new flags, "in hw" and "not in hw" such that user space
can determine if a filter is actually offloaded to hw. The "in hw"
UAPI semantics was chosen so it's similar to the "skip hw" flag logic.

If none of these two flags are set, this signals running
over older kernel.

As an example, add one vlan push + fwd rule, one matchall rule and one u32 rule
without any flags, and another vlan + fwd skip_sw rule, such that the different TC
classifier attempt to offload all of them -- all over mlx5 SRIOV VF rep:

	flower skip_sw indev eth2_0 src_mac e4:11:22:33:44:50 dst_mac e4:1d:2d:a5:f3:9d
	action vlan push id 52 action mirred egress redirect dev eth2

	flower indev eth2_0 src_mac e4:11:22:33:44:50 dst_mac e4:11:22:33:44:51
	action vlan push id 53 action mirred egress redirect dev eth2

	u32 ht 800: flowid 800:1 match ip src 192.168.1.0/24 action drop

Since that VF rep doesn't offload matchall/u32 and can currently offload
only one vlan push rule we expect three of the rules not to be offloaded:

filter protocol ip pref 99 u32
filter protocol ip pref 99 u32 fh 800: ht divisor 1
filter protocol ip pref 99 u32 fh 800::1 order 1 key ht 800 bkt 0 flowid 800:1 not in_hw
  match c0a80100/ffffff00 at 12
	action order 1: gact action drop
	 random type none pass val 0
	 index 8 ref 1 bind 1

filter protocol all pref 49150 matchall
filter protocol all pref 49150 matchall handle 0x1
  not in_hw
	action order 1: mirred (Egress Mirror to device veth1) pipe
 	index 27 ref 1 bind 1

filter protocol ip pref 49151 flower
filter protocol ip pref 49151 flower handle 0x1
  indev eth2_0
  dst_mac e4:11:22:33:44:51
  src_mac e4:11:22:33:44:50
  eth_type ipv4
  not in_hw
	action order 1:  vlan push id 53 protocol 802.1Q priority 0 pipe
	 index 20 ref 1 bind 1

	action order 2: mirred (Egress Redirect to device eth2) stolen
 	index 26 ref 1 bind 1

filter protocol ip pref 49152 flower
filter protocol ip pref 49152 flower handle 0x1
  indev eth2_0
  dst_mac e4:1d:2d:a5:f3:9d
  src_mac e4:11:22:33:44:50
  eth_type ipv4
  skip_sw
  in_hw
	action order 1:  vlan push id 52 protocol 802.1Q priority 0 pipe
	 index 19 ref 1 bind 1

	action order 2: mirred (Egress Redirect to device eth2) stolen
 	index 25 ref 1 bind 1

v3 --> v4 changes:
 - removed extra parenthesis (Dave)

v2 --> v3 changes:
 - fixed the matchall dump flags patch to do proper checks (Jakub)
 - added the same proper checks to flower where they were missing
 - that flower patch was added as #1 and hence all the other patches are offed-by-one

v1 --> v2 changes:
 - applied feedback from Jakub and Dave -- where none of the skip flags were set,
   the suggested approach didn't allow user space to distringuish between old kernel
   to a case when offloading to HW worked fine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

BPF classifier support for the "in hw" offloading flags.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

U32 support for the "in hw" offloading flags.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

Matchall support for the "in hw" offloading flags.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flower support for the "in hw" offloading flags.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently there is no way of querying whether a filter is
offloaded to HW or not when using "both" policy (where none
of skip_sw or skip_hw flags are set by user-space).

Add two new flags, "in hw" and "not in hw" such that user
space can determine if a filter is actually offloaded to
hw or not. The "in hw" UAPI semantics was chosen so it's
similar to the "skip hw" flag logic.

If none of these two flags are set, this signals running
over older kernel.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The classifier flags are not dumped to user-space, do that.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump the classifier flags only if non zero and make sure to check
the return status of the handler that puts them into the netlink msg.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>