Skip to content

L
linux
Switch branch/tag
  1. 16 Aug, 2016 5 commits
    • Karl Heiss's avatar
      sctp: Prevent soft lockup when sctp_accept() is called during a timeout event · a4377c6e
      Karl Heiss authored 
      commit 635682a1 upstream.

A case can occur when sctp_accept() is called by the user during
a heartbeat timeout event after the 4-way handshake.  Since
sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the
bh_sock_lock in sctp_generate_heartbeat_event() will be taken with
the listening socket but released with the new association socket.
The result is a deadlock on any future attempts to take the listening
socket lock.

Note that this race can occur with other SCTP timeouts that take
the bh_lock_sock() in the event sctp_accept() is called.

 BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0]
 ...
 RIP: 0010:[<ffffffff8152d48e>]  [<ffffffff8152d48e>] _spin_lock+0x1e/0x30
 RSP: 0018:ffff880028323b20  EFLAGS: 00000206
 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48
 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000
 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0
 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225
 FS:  0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
 CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0)
 Stack:
 ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000
 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00
 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8
 Call Trace:
 <IRQ>
 [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp]
 [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120
 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0
 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0
 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0
 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440
 [<ffffffff81497255>] ? ip_rcv+0x275/0x350
 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750
 ...

With lockdep debugging:

 =====================================
 [ BUG: bad unlock balance detected! ]
 -------------------------------------
 CslRx/12087 is trying to release lock (slock-AF_INET) at:
 [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp]
 but there are no more locks to release!

 other info that might help us debug this:
 2 locks held by CslRx/12087:
 #0:  (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0
 #1:  (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp]

Ensure the socket taken is also the same one that is released by
saving a copy of the socket before entering the timeout event
critical section.
Signed-off-by: default avatarKarl Heiss <kheiss@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
(cherry picked from commit 013dd9e0)
Signed-off-by: default avatarChas Williams <3chas3@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a4377c6e
    • Andy Lutomirski's avatar
      x86/mm: Add barriers and document switch_mm()-vs-flush synchronization · 1b8542cd
      Andy Lutomirski authored 
      commit 71b3c126 upstream.

When switch_mm() activates a new PGD, it also sets a bit that
tells other CPUs that the PGD is in use so that TLB flush IPIs
will be sent.  In order for that to work correctly, the bit
needs to be visible prior to loading the PGD and therefore
starting to fill the local TLB.

Document all the barriers that make this work correctly and add
a couple that were missing.
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
[ luis: backported to 3.16:
  - dropped N/A comment in flush_tlb_mm_range()
  - adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
[ciwillia@brocade.com: backported to 3.14: adjusted context]
Signed-off-by: default avatarCharles (Chas) Williams <ciwillia@brocade.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1b8542cd
    • Tejun Heo's avatar
      printk: do cond_resched() between lines while outputting to consoles · 7c7b4fe1
      Tejun Heo authored 
      commit 8d91f8b1 upstream.

@console_may_schedule tracks whether console_sem was acquired through
lock or trylock.  If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched().  This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.

However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines.  Also, only a few drivers call
console_conditional_schedule() to begin with.  This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.

If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.

Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reported-by: default avatarCalvin Owens <calvinowens@fb.com>
Acked-by: default avatarJan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
[ciwillia@brocade.com: adjust context for 3.14.y]
Signed-off-by: default avatarChas Williams <ciwillia@brocade.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7c7b4fe1
    • Hugh Dickins's avatar
      mm: migrate dirty page without clear_page_dirty_for_io etc · 53a35fd3
      Hugh Dickins authored 
      commit 42cb14b1 upstream.

clear_page_dirty_for_io() has accumulated writeback and memcg subtleties
since v2.6.16 first introduced page migration; and the set_page_dirty()
which completed its migration of PageDirty, later had to be moderated to
__set_page_dirty_nobuffers(); then PageSwapBacked had to skip that too.

No actual problems seen with this procedure recently, but if you look into
what the clear_page_dirty_for_io(page)+set_page_dirty(newpage) is actually
achieving, it turns out to be nothing more than moving the PageDirty flag,
and its NR_FILE_DIRTY stat from one zone to another.

It would be good to avoid a pile of irrelevant decrementations and
incrementations, and improper event counting, and unnecessary descent of
the radix_tree under tree_lock (to set the PAGECACHE_TAG_DIRTY which
radix_tree_replace_slot() left in place anyway).

Do the NR_FILE_DIRTY movement, like the other stats movements, while
interrupts still disabled in migrate_page_move_mapping(); and don't even
bother if the zone is the same.  Do the PageDirty movement there under
tree_lock too, where old page is frozen and newpage not yet visible:
bearing in mind that as soon as newpage becomes visible in radix_tree, an
un-page-locked set_page_dirty() might interfere (or perhaps that's just
not possible: anything doing so should already hold an additional
reference to the old page, preventing its migration; but play safe).

But we do still need to transfer PageDirty in migrate_page_copy(), for
those who don't go the mapping route through migrate_page_move_mapping().
Signed-off-by: default avatarHugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
[ciwillia@brocade.com: backported to 3.14: adjusted context]
Signed-off-by: default avatarCharles (Chas) Williams <ciwillia@brocade.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      53a35fd3
    • Alan Stern's avatar
      USB: fix invalid memory access in hub_activate() · 627c25d0
      Alan Stern authored 
      commit e50293ef upstream.

Commit 8520f380 ("USB: change hub initialization sleeps to
delayed_work") changed the hub_activate() routine to make part of it
run in a workqueue.  However, the commit failed to take a reference to
the usb_hub structure or to lock the hub interface while doing so.  As
a result, if a hub is plugged in and quickly unplugged before the work
routine can run, the routine will try to access memory that has been
deallocated.  Or, if the hub is unplugged while the routine is
running, the memory may be deallocated while it is in active use.

This patch fixes the problem by taking a reference to the usb_hub at
the start of hub_activate() and releasing it at the end (when the work
is finished), and by locking the hub interface while the work routine
is running.  It also adds a check at the start of the routine to see
if the hub has already been disconnected, in which nothing should be
done.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarAlexandru Cornea <alexandru.cornea@intel.com>
Tested-by: default avatarAlexandru Cornea <alexandru.cornea@intel.com>
Fixes: 8520f380 ("USB: change hub initialization sleeps to delayed_work")
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backported to 3.16:
  - Added forward declaration of hub_release() which mainline had with commit
    32a69589 ("usb: hub: convert khubd into workqueue") ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
Signed-off-by: default avatarCharles (Chas) Williams <ciwillia@brocade.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      627c25d0
  3. 10 Aug, 2016 22 commits
  5. 27 Jul, 2016 13 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7