- 28 Apr, 2017 31 commits
-
-
Dennis Dalessandro authored
Checkpatch flagged a misspelled word. Fix it. Fixes: 8764522e ("staging/rdma/hfi1: Unexpected link up pkey values are not an error") Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Neel Desai authored
Ingress and egress port P_Key checking should always be performed for HFIs. This patch will enable ingress and egress P_Key checking when the port is initialized and will ignore the P_Key information sent by the FM in the port info structure which is meant to be used only by the switch. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by:
Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Stuart Summers authored
Secure data is transferred across the link during verify cap. This includes Neighbor Guid, Type, and Port Number. This transfer is not guaranteed to complete until the 8051 firmware has completed processing of the state_complete frame. Move the consumption of this data from verify cap handling to link up handling to ensure the data is finalized. Additionally, do not notify the SM that the link is up until after this data is actually available. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Stuart Summers <john.s.summers@intel.com> Signed-off-by:
-
Neel Desai authored
When we receive a QSFP_HIGH_TEMP_ALARM or QSFP_HIGH_TEMP_WARNING interrupt, print a "QSFP cable temperature too high" message. Reviewed-by:
-
Tadeusz Struk authored
Soft lockups can occur because the mad processing on different CPUs acquire the spin lock dc8051_lock: [534552.835870] [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1] [534552.835880] [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1] [534552.835893] [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1] [534552.835904] [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1] [534552.835908] [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0 [534552.835936] [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core] [534552.835939] [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240 [534552.835947] [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core] [534552.835955] [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core] [534552.835962] [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core] [534552.835964] [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [534552.835966] [<ffffffff810a8d76>] worker_thread+0x126/0x410 [534552.835969] [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [534552.835971] [<ffffffff810b052f>] kthread+0xcf/0xe0 [534552.835974] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [534552.835977] [<ffffffff81696418>] ret_from_fork+0x58/0x90 [534552.835980] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 This issue is made worse when the 8051 is busy and the reads take longer. Fix by using a non-spinning lock procure. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The driver progress routines can call cond_resched() when a timeslice is exhausted and irqs are enabled. If the ULP had been holding a spin lock without disabling irqs and the post send directly called the progress routine, the cond_resched() could yield allowing another thread from the same ULP to deadlock on that same lock. Correct by replacing the current hfi1_do_send() calldown with a unique one for post send and adding an argument to hfi1_do_send() to indicate that the send engine is running in a thread. If the routine is not running in a thread, avoid calling cond_resched(). CC: <stable@vger.kernel.org> # 4.7.x- Fixes: Commit 831464ce ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets") Reviewed-by:
-
Don Hiatt authored
Move FECN and BECN related defines to common header files Reviewed-by:
Don Hiatt <don.hiatt@intel.com> Signed-off-by:
Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by:
-
Don Hiatt authored
These inline functions improve code readability by enabling callers to read specific fields from the header without knowledge of byte offsets. Reviewed-by:
-
Dasaratharaman Chandramouli authored
The function really returned the 5-bit sc value from the header and rhf. hdr2sc didn't quite describe what it did. Reviewed-by:
-
Sebastian Sanchez authored
VL15 in the SC2VL table is used to indicate an invalid SC for the FM, however, internally the driver remaps SCs from VL15 to ILLEGAL_VL to prevent error counts. This mapping confuses the FM when performing a sweep, making it return a table mismatch error. Have SMA convert ILLEGAL_VL to VL15 entries for the SC2VL table queries. Reviewed-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
Improve the safety of the code by validating the user supplied tidcnt before use. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
-
Michael J. Ruhl authored
The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). The current code only uses the MGID for identifying multicast groups. Update the driver to be compliant with this definition. Reviewed-by:
-
Michael J. Ruhl authored
The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). Currently the MLID value is not validated. Add check to verify that the MLID value is in the correct address range. Fixes: 0c33aeed ("[IB] Add checks to multicast attach and detach") Cc: stable@vger.kernel.org Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Michael J. Ruhl authored
The FM uses the values of MulticastMask and CollectiveMask to determine the number of bits for net masks. The current values of 0 and 0 are incorrect. The values should be 4 and 1. Updated the necessary code to reflect the specified values. Reviewed-by:
-
Michael J. Ruhl authored
A list of MGID/MLID pairs is built when doing a multicast attach. When the multicast detach is called, the list is searched, and regardless of the search outcome, the driver detach is called. If an MGID/MLID pair is not on the list, driver detach should not be called, and an error should be returned. Calling the driver without removing an MGID/MLID pair from the list can leave the core and driver out of sync. Fixes: f4e40156 ("IB/uverbs: track multicast group membership for userspace QPs") Cc: stable@vger.kernel.org Reviewed-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by:
-
Leon Romanovsky authored
Fix mismatch between types, wqe_words are in le32 format, while opcode in CPU format. The following sparse warnings are helped to find it: drivers/infiniband/hw/nes/nes_hw.c:3058:24: warning: incorrect type in assignment (different base types) drivers/infiniband/hw/nes/nes_hw.c:3058:24: expected unsigned int [unsigned] [assigned] [usertype] opcode drivers/infiniband/hw/nes/nes_hw.c:3058:24: got restricted __le32 <noident> CC: Faisal Latif <faisal.latif@intel.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
Simplify code in find_free_vf_and_create_qp_grp() to avoid sparse error regarding call to unlock in the block other than lock was called. drivers/infiniband/hw/usnic/usnic_ib_verbs.c:206:9: warning: context imbalance in 'find_free_vf_and_create_qp_grp' - different lock contexts for basic block CC: Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Leon Romanovsky authored
Sparse tool complains about undeclared symbols in usnic_ib_verbs.c and usnic_ib_sysfs.c This is caused by lack of direct include of appropriate usnic_ib_verbs.h and usnic_ib_sysfs.h, where all these functions were declared. Simple include eliminates 30 warnings similar to the below one: drivers/infiniband/hw/usnic/usnic_ib_sysfs.c:304:6: warning: symbol 'usnic_ib_sysfs_unregister_usdev' was not declared. Should it be static? CC: Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Leon Romanovsky authored
Functions declared in uverbs_std_types.c are local to that file, but they lack static declarations. This produces a lot of sparse warnings, like the one below: drivers/infiniband/core/uverbs_std_types.c:41:5: warning: symbol 'uverbs_free_ah' was not declared. Should it be static? So mark them as static. CC: Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Pan Bian authored
Function alloc_skb() will return a NULL pointer when there is no enough memory. However, the return value of alloc_skb() is directly used without validation in function send_fw_pass_open_req(). This patches checks the return value of alloc_skb() against NULL. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to typo in pr_err message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Carpenter authored
We need to call spin_unlock_irqrestore() instead of vanilla spin_unlock() on this error path. Fixes: 119a8e70 ("IB/rdmavt: Add AH to rdmavt") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Paolo Abeni authored
The infiniband address handle can be triggered to resolve an ipv6 address in response to MAD packets, regardless of the ipv6 module being disabled via the kernel command line argument. That will cause a call into the ipv6 routing code, which is not initialized, and a conseguent oops. This commit addresses the above issue replacing the direct lookup call with an indirect one via the ipv6 stub, which is properly initialized according to the ipv6 status (e.g. if ipv6 is disabled, the routing lookup fails gracefully) Cc: stable@vger.kernel.org # 3.12+ Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Amrani, Ram authored
Split the poll responder CQ into two functions. Add support for send+invalidate in poll CQ. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
Amrani, Ram authored
Wait for all relevant CNQ interrupts before freeing the CQ. Don't invoke completion handlers for a destroyed CQ. Signed-off-by:
-
Amrani, Ram authored
Avoid attempting to release irrelevant (and unused) resources for GSI QP. Signed-off-by:
-
Amrani, Ram authored
After checking the path upwards towards root complex, actualy check root complex atomic_req capability, and not our own NIC. Verify that the PCIe device control register's atomic egress block is cleared in the path. Verify that the PCIe version is at least 2. Signed-off-by:
-
Amrani, Ram authored
Signed-off-by:
-
- 25 Apr, 2017 9 commits
-
-
Jason Gunthorpe authored
imm_data is copied directly from the ib_send_wr and ib_wc which have it marked as __be32, copy that mark into the uapi structures as well. Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by:
Adit Ranadive <aditr@vmware.com> Acked-by:
-
Artemy Kovalyov authored
Internally MW implemented as KLM MKey and filled by userspace UMR postsends. Handle pagefault trigered by operations on this MKeys. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
To make page fault handling code more flexible split pagefault_single_data_segment() function. Keep MR resolution in pagefault_single_data_segment() and move actual updates into pagefault_single_mr(). Signed-off-by:
-
Artemy Kovalyov authored
Add IB_ACCESS_HUGETLB ib_reg_mr flag. Hugetlb region registered with this flag will use single translation entry per huge page. Signed-off-by:
-
Artemy Kovalyov authored
Currenlty ODP supports only regular MMU pages. Add ODP support for regions consisting of physically contiguous chunks of arbitrary order (huge pages for instance) to improve performance. Signed-off-by:
-
Artemy Kovalyov authored
Currenlty ODP supports only regular MMU pages. Add ODP support for regions consisting of physically contiguous chunks of arbitrary order (huge pages for instance) to improve performance. Signed-off-by:
-
Artemy Kovalyov authored
Decrease verbosity level of ODP error flows messages to debug level. Remove one redundant print since debug level message already exists in this flow. Fixes: d9aaed83 ('{net,IB}/mlx5: Refactor page fault handling') Signed-off-by:
-
Artemy Kovalyov authored
When implicit MR's leaf MKey becomes unused, i.e. when it's last page being released my MMU invalidation it is marked as "dying" and scheduled for release by garbage collector. Currentle consequent page fault may remove "dying" flag. Treat leaf MKey as non-existent once it was scheduled to removal by GC. Fixes: 81713d37 ('IB/mlx5: Add implicit MR support') Signed-off-by:
-
Artemy Kovalyov authored
Translation table updates of large UMR may require multiple post send operations. The last operations can be in various lengths, but current code set them to be the same length. Fixes: 7d0cc6ed ('IB/mlx5: Add MR cache for large UMR regions') Signed-off-by:
-
