- 08 Nov, 2016 40 commits
-
-
Gilad Broner authored
During runtime resume operation, clock scaling may get indirectly resumed via call to ufshcd_set_dev_pwr_mode(): Start/Stop Unit command times out and SCSI error handling ultimately calls the host reset handler to recover, during which clock scaling is resumed. Error case exit path of runtime resume will disable clocks. As clock scaling was already resumed, it will get scheduled later on and try to access UFS registers while clocks are disabled, resulting in unclocked register access. Signed-off-by:
Gilad Broner <gbroner@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Gilad Broner authored
According to UFS device specification, sense data can be only 18 bytes long, this change makes the changes accordingly. Signed-off-by:
-
Gilad Broner authored
Add a write memory barrier to make sure descriptors prepared are actually written to memory before ringing the doorbell. We have also added the write memory barrier after ringing the doorbell register so that controller sees the new request immediately. Signed-off-by:
-
Yaniv Gardi authored
In this change there are a few fixes of possible NULL pointer access and possible access to index that exceeds array boundaries. Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by:
-
Andy Shevchenko authored
For small buffers we may use %*ph[N] specifier, for the bigger blocks print_hex_dump() call. Cc: Don Brace <don.brace@microsemi.com> Cc: esc.storagedev@microsemi.com Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Andy Shevchenko authored
In kernel we have defined specifier (%*ph[C]) to dump small buffers in a hex format. Replace custom approach by a generic one. Cc: Jon Mason <jonmason@broadcom.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Andy Shevchenko authored
We have table of the HEX characters in the kernel. Replace custom by a generic one. Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
-
Oleksandr Khoshaba authored
In the kernel we have nice specifier to print MAC by given pointer to the address in a binary form. Signed-off-by:
Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com> Acked-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by:
-
Andy Shevchenko authored
LAN MAC addresses can be printed directly using %pMR specifier. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Andy Shevchenko authored
Instead of supplying each byte through stack let's use %pM specifier. Cc: Hiral Patel <hiralpat@cisco.com> Cc: Suma Ramars <sramars@cisco.com> Acked-by:
Tom Tucker <tom@opengridcomputing.com> Signed-off-by:
-
Kashyap Desai authored
This patch addresses the issue of driver firing DCMDs in PCI shutdown/detach path irrespective of firmware state. Driver will now check whether firmware is in operational state or not before firing DCMDs. If firmware is in unrecoverable state or does not become operational within specfied time, driver will skip firing DCMDs. [mkp: fixed typos] Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Kashyap Desai authored
This patch fixes the issue of wrong PhysArm was sent to firmware for R1 VD downgrade. Signed-off-by:
Kiran Kumar Kasturi <kiran-kumar.kasturi@broadcom.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Kashyap Desai authored
For SRIOV enabled firmware, if there is a OCR(online controller reset) possibility driver set the convert flag to 1, which is not happening if there are outstanding commands even after 180 seconds. As driver does not set convert flag to 1 and still making the OCR to run, VF(Virtual function) driver is directly writing on to the register instead of waiting for 30 seconds. Setting convert flag to 1 will cause VF driver will wait for 30 secs before going for reset. CC: stable@vger.kernel.org Signed-off-by:
-
James Smart authored
Avago is now known as Broadcom. Revise the emails and website for lpfc accordingly. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Hannes Reinecke authored
The ->seq_release callback only ever had one implementation, so call the function directly and drop the callback. Signed-off-by:
Johannes Thumshirn <jth@kernel.org> Signed-off-by:
-
Hannes Reinecke authored
The ->seq_assign callback only ever had one implementation, so call the function directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->seq_set_resp callback only ever had one implementation, so call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->seq_start_next callback only ever had one implementation, so call the function directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->exch_done callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->seq_exch_abort callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->seq_send callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
Function is empty now and can be removed. Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Hannes Reinecke authored
The ->rport_flush_queue callback only ever had a single implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->rport_recv_req callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->rport_logoff callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->rport_login callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->rport_create callback only ever had a single implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
Required for the next patch. Signed-off-by:
-
Hannes Reinecke authored
The ->rport_lookup callback only ever had a single implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->rport_destroy callback only ever had one implementation, so we can as well call it directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->exch_seq_send callback only ever had one implementation, so we can call the function directly and drop the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->lport_recv callback only ever had one implementation, so call the function directly and remove the callback. Signed-off-by:
-
Hannes Reinecke authored
The ->lport_reset callback only ever had one implementation, which already is exported. So remove it and use the function directly. Signed-off-by:
-
Hannes Reinecke authored
The 'seq_els_rsp_send' callback only ever had one implementation, so we might as well drop it and use the function directly. Signed-off-by:
-
Michael Cyr authored
Signed-off-by:
Michael Cyr <mikecyr@us.ibm.com> Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Steven Royer <seroyer@linux.vnet.ibm.com> Signed-off-by:
-
Michael Cyr authored
Signed-off-by:
-
Michael Cyr authored
Signed-off-by:
-
Michael Cyr authored
This patch adds code to disconnect from the client, which will make sure any outstanding commands have been completed, before continuing on with the remove operation. Signed-off-by:
-
Michael Cyr authored
This patch changes the way the IBM vSCSI server driver manages its Command/Response Queue (CRQ). We used to register the CRQ with phyp at probe time. Now we wait until tpg_enable_store. Similarly, when tpg_enable_store is called to "disable" (i.e. the stored value is 0), we unregister the queue with phyp. One consquence to this is that we have no need for the PART_UP_WAIT_ENAB state, since we can't get an Init Message from the client in our CRQ if we're waiting to be enabled, since we haven't registered the queue yet. Signed-off-by:
-
Michael Cyr authored
This patch reorders functions in a manner necessary for a follow-on patch. It also makes some minor styling changes (mostly removing extra spaces) and fixes some typos. There are no code changes in this patch, with one exception: due to the reordering of the functions, I needed to explicitly declare a function at the top of the file. However, this will be removed in the next patch, since the code requiring the predeclaration will be removed. Signed-off-by:
-
