- 06 Nov, 2019 40 commits
-
-
Kailang Yang authored
commit f0778871 upstream. Support new codec ALC623. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ed97b6a8bd9445ecb48bc763d9aaba7a@realtek.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aaron Ma authored
commit 8a6c55d0 upstream. These 2 ThinkCentres installed a new realtek codec ID 0x623, it has 2 front mics with the same location on pin 0x18 and 0x19. Apply fixup ALC283_FIXUP_HEADSET_MIC to change 1 front mic location to right, then pulseaudio can handle them. One "Front Mic" and one "Mic" will be shown, and audio output works fine. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191024114439.31522-1-aaron.ma@canonical.comSigned-off-by:
-
Takashi Sakamoto authored
commit f2bbdbcb upstream. A helper function of ALSA bebob driver returns negative value in a function which has a prototype to return unsigned value. This commit fixes it by changing the prototype. Fixes: eb7b3a05 ("ALSA: bebob: Add commands and connections/streams management") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Miklos Szeredi authored
commit e4648309 upstream. Make sure cached writes are not reordered around open(..., O_TRUNC), with the obvious wrong results. Fixes: 4d99ff8f ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit b24e7598 upstream. If writeback cache is enabled, then writes might get reordered with chmod/chown/utimes. The problem with this is that performing the write in the fuse daemon might itself change some of these attributes. In such case the following sequence of operations will result in file ending up with the wrong mode, for example: int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL); write (fd, "1", 1); fchown (fd, 0, 0); fchmod (fd, 04755); close (fd); This patch fixes this by flushing pending writes before performing chown/chmod/utimes. Reported-by:
Giuseppe Scrivano <gscrivan@redhat.com> Tested-by:
-
Hui Peng authored
[ Upstream commit 39d170b3 ] The `ar_usb` field of `ath6kl_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath6kl_usb` object according to endpoint descriptors read from the device side, as shown below in `ath6kl_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath6kl_usb_alloc_urb_from_pipe` and `ath6kl_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref (CVE-2019-15098). Signed-off-by:
Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mika Westerberg authored
[ Upstream commit 94379521 ] The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by:
Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit fd47a417 ] The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false. Fixes: 1d427be4 ("USB: legousbtower: fix slab info leak at probe") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191011141115.GA4521@mwandaSigned-off-by:
-
Mike Christie authored
[ Upstream commit cf1b2326 ] nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5 ("nbd: fix max number of supported devs") Tested-by:
Richard W.M. Jones <rjones@redhat.com> Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Luca Coelho authored
[ Upstream commit 12e36d98 ] We currently support two NICs in FW version 29, namely 7265D and 3168. Out of these, only 7265D supports GEO SAR, so adjust the function that checks for it accordingly. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Fixes: f5a47fae ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support") Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 1099f484 ] Headphone on XPS 9350/9360 produces a background white noise. The The noise level somehow correlates with "Headphone Mic Boost", when it sets to 1 the noise disappears. However, doing this has a side effect, which also decreases the overall headphone volume so I didn't send the patch upstream. The noise was bearable back then, but after commit 717f43d8 ("ALSA: hda/realtek - Update headset mode for ALC256") the noise exacerbates to a point it starts hurting ears. So let's use the workaround to set "Headphone Mic Boost" to 1 and lock it so it's not touchable by userspace. Fixes: 717f43d8 ("ALSA: hda/realtek - Update headset mode for ALC256") BugLink: https://bugs.launchpad.net/bugs/1654448 BugLink: https://bugs.launchpad.net/bugs/1845810Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20191003043919.10960-1-kai.heng.feng@canonical.comSigned-off-by:
-
Vladimir Murzin authored
[ Upstream commit 4c0742f6 ] It was reported that 72cd4064 "NOMMU: Toggle only bits in EXC_RETURN we are really care of" breaks NOMMU+XIP combination. It happens because saved EXC_RETURN gets overwritten when data section is relocated. The fix is to propagate EXC_RETURN via register and let relocation code to commit that value into memory. Fixes: 72cd4064 ("ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of") Reported-by:
afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Petr Mladek authored
[ Upstream commit d303de1f ] A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit 062795fc ] Depending on inlining decisions by the compiler, __get/put_user_fn might become out of line. Then the compiler is no longer able to tell that size can only be 1,2,4 or 8 due to the check in __get/put_user resulting in false positives like ./arch/s390/include/asm/uaccess.h: In function ‘__put_user_fn’: ./arch/s390/include/asm/uaccess.h:113:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized] 113 | return rc; | ^~ ./arch/s390/include/asm/uaccess.h: In function ‘__get_user_fn’: ./arch/s390/include/asm/uaccess.h:143:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized] 143 | return rc; | ^~ These functions are supposed to be always inlined. Mark it as such. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 1047ec86 ] Our client can issue multiple SETCLIENTID operations to the same server in some circumstances. Ensure that calls to nfs4_proc_setclientid() after the first one do not overwrite the previously allocated cl_acceptor string. unreferenced object 0xffff888461031800 (size 32): comm "mount.nfs", pid 2227, jiffies 4294822467 (age 1407.749s) hex dump (first 32 bytes): 6e 66 73 40 6b 6c 69 6d 74 2e 69 62 2e 31 30 31 nfs@klimt.ib.101 35 67 72 61 6e 67 65 72 2e 6e 65 74 00 00 00 00 5granger.net.... backtrace: [<00000000ab820188>] __kmalloc+0x128/0x176 [<00000000eeaf4ec8>] gss_stringify_acceptor+0xbd/0x1a7 [auth_rpcgss] [<00000000e85e3382>] nfs4_proc_setclientid+0x34e/0x46c [nfsv4] [<000000003d9cf1fa>] nfs40_discover_server_trunking+0x7a/0xed [nfsv4] [<00000000b81c3787>] nfs4_discover_server_trunking+0x81/0x244 [nfsv4] [<000000000801b55f>] nfs4_init_client+0x1b0/0x238 [nfsv4] [<00000000977daf7f>] nfs4_set_client+0xfe/0x14d [nfsv4] [<0000000053a68a2a>] nfs4_create_server+0x107/0x1db [nfsv4] [<0000000088262019>] nfs4_remote_mount+0x2c/0x59 [nfsv4] [<00000000e84a2fd0>] legacy_get_tree+0x2d/0x4c [<00000000797e947c>] vfs_get_tree+0x20/0xc7 [<00000000ecabaaa8>] fc_mount+0xe/0x36 [<00000000f15fafc2>] vfs_kern_mount+0x74/0x8d [<00000000a3ff4e26>] nfs_do_root_mount+0x8a/0xa3 [nfsv4] [<00000000d1c2b337>] nfs4_try_mount+0x58/0xad [nfsv4] [<000000004c9bddee>] nfs_fs_mount+0x820/0x869 [nfs] Fixes: f11b2a1c ("nfs4: copy acceptor name from context ... ") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Xiubo Li authored
[ Upstream commit 86248810 ] 1. nbd_put takes the mutex and drops nbd->ref to 0. It then does idr_remove and drops the mutex. 2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails to find an existing device, so it does nbd_dev_add. 3. just before the nbd_put could call nbd_dev_remove or not finished totally, but if nbd_dev_add try to add_disk, we can hit: debugfs: Directory 'nbd1' with parent 'block' already present! This patch will make sure all the disk add/remove stuff are done by holding the nbd_index_mutex lock. Reported-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Xiubo Li <xiubli@redhat.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit e0b0cb93 ] In hgcm_call_preprocess_linaddr memory is allocated for bounce_buf but is not released if copy_form_user fails. In order to prevent memory leak in case of failure, the assignment to bounce_buf_ret is moved before the error check. This way the allocated bounce_buf will be released by the caller. Fixes: 579db9d4 ("virt: Add vboxguest VMMDEV communication code") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190930204223.3660-1-navid.emamdoost@gmail.comSigned-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit efcb5296 ] Use ARRAY_SIZE to caluculate the top of the o32 stack. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 46f16195 ] Commit ac7c3e4f ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. In cace of __xchg this would cause to reference function __xchg_called_with_bad_pointer, which is an error case for catching bugs and will not happen for correct code, if __xchg is inlined. Signed-off-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit ab612b1d ] In adis_update_scan_mode, if allocation for adis->buffer fails, previously allocated adis->xfer needs to be released. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Nirmoy Das authored
[ Upstream commit 083164db ] cleanup error handling code and make sure temporary info array with the handles are freed by amdgpu_bo_list_put() on idr_replace()'s failure. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit df4d2973 ] It turns out that the NMI latency workaround from commit: 6d3edaae ("x86/perf/amd: Resolve NMI latency issues for active PMCs") ends up being too conservative and results in the perf NMI handler claiming NMIs too easily on AMD hardware when the NMI watchdog is active. This has an impact, for example, on the hpwdt (HPE watchdog timer) module. This module can produce an NMI that is used to reset the system. It registers an NMI handler for the NMI_UNKNOWN type and relies on the fact that nothing has claimed an NMI so that its handler will be invoked when the watchdog device produces an NMI. After the referenced commit, the hpwdt module is unable to process its generated NMI if the NMI watchdog is active, because the current NMI latency mitigation results in the NMI being claimed by the perf NMI handler. Update the AMD perf NMI latency mitigation workaround to, instead, use a window of time. Whenever a PMC is handled in the perf NMI handler, set a timestamp which will act as a perf NMI window. Any NMIs arriving within that window will be claimed by perf. Anything outside that window will not be claimed by perf. The value for the NMI window is set to 100 msecs. This is a conservative value that easily covers any NMI latency in the hardware. While this still results in a window in which the hpwdt module will not receive its NMI, the window is now much, much smaller. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 6d3edaae ("x86/perf/amd: Resolve NMI latency issues for active PMCs") Link: https://lkml.kernel.org/r/Message-ID: Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Frederic Weisbecker authored
[ Upstream commit 68e7a4d6 ] vtime_account_system() assumes that the target task to account cputime to is always the current task. This is most often true indeed except on task switch where we call: vtime_common_task_switch(prev) vtime_account_system(prev) Here prev is the scheduling-out task where we account the cputime to. It doesn't match current that is already the scheduling-in task at this stage of the context switch. So we end up checking the wrong task flags to determine if we are accounting guest or system time to the previous task. As a result the wrong task is used to check if the target is running in guest mode. We may then spuriously account or leak either system or guest time on task switch. Fix this assumption and also turn vtime_guest_enter/exit() to use the task passed in parameter as well to avoid future similar issues. Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Signed-off-by:
-
Kan Liang authored
[ Upstream commit 8d7c6ac3 ] Comet Lake is the new 10th Gen Intel processor. Add two new CPU model numbers to the Intel family list. The CPU model numbers are not published in the SDM yet but they come from an authoritative internal source. [ bp: Touch up commit message. ] Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Cc: ak@linux.intel.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1570549810-25049-2-git-send-email-kan.liang@linux.intel.comSigned-off-by:
-
Yunfeng Ye authored
[ Upstream commit 3e7c93bd ] There are no return value checking when using kzalloc() and kcalloc() for memory allocation. so add it. Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 2abb7d3b ] In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283 to check whether inode_alloc is NULL: if (inode_alloc) When inode_alloc is NULL, it is used on line 287: ocfs2_inode_lock(inode_alloc, &bh, 0); ocfs2_inode_lock_full_nested(inode, ...) struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); Thus, a possible null-pointer dereference may occur. To fix this bug, inode_alloc is checked on line 286. This bug is found by a static analysis tool STCheck written by us. Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.comSigned-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 583fee3e ] In ocfs2_write_end_nolock(), there are an if statement on lines 1976, 2047 and 2058, to check whether handle is NULL: if (handle) When handle is NULL, it is used on line 2045: ocfs2_update_inode_fsync_trans(handle, inode, 1); oi->i_sync_tid = handle->h_transaction->t_tid; Thus, a possible null-pointer dereference may occur. To fix this bug, handle is checked before calling ocfs2_update_inode_fsync_trans(). This bug is found by a static analysis tool STCheck written by us. Link: http://lkml.kernel.org/r/20190726033705.32307-1-baijiaju1990@gmail.comSigned-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 56e94ea1 ] In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to check whether loc->xl_entry is NULL: if (loc->xl_entry) When loc->xl_entry is NULL, it is used on line 2158: ocfs2_xa_add_entry(loc, name_hash); loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash); loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size); and line 2164: ocfs2_xa_add_namevalue(loc, xi); loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len); loc->xl_entry->xe_name_len = xi->xi_name_len; Thus, possible null-pointer dereferences may occur. To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry() abnormally returns with -EINVAL. These bugs are found by a static analysis tool STCheck written by us. [akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()] Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.comSigned-off-by:
-
Jia Guo authored
[ Upstream commit 7a243c82 ] Unused portion of a part-written fs-block-sized block is not set to zero in unaligned append direct write.This can lead to serious data inconsistencies. Ocfs2 manage disk with cluster size(for example, 1M), part-written in one cluster will change the cluster state from UN-WRITTEN to WRITTEN, VFS(function dio_zero_block) doesn't do the cleaning because bh's state is not set to NEW in function ocfs2_dio_wr_get_block when we write a WRITTEN cluster. For example, the cluster size is 1M, file size is 8k and we direct write from 14k to 15k, then 12k~14k and 15k~16k will contain dirty data. We have to deal with two cases: 1.The starting position of direct write is outside the file. 2.The starting position of direct write is located in the file. We need set bh's state to NEW in the first case. In the second case, we need mapped twice because bh's state of area out file should be set to NEW while area in file not. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/5292e287-8f1a-fd4a-1a14-661e555e0bed@huawei.comSigned-off-by:
Jia Guo <guojia12@huawei.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Boris Ostrovsky authored
[ Upstream commit c6875f3a ] Currently execution of panic() continues until Xen's panic notifier (xen_panic_event()) is called at which point we make a hypercall that never returns. This means that any notifier that is supposed to be called later as well as significant part of panic() code (such as pstore writes from kmsg_dump()) is never executed. There is no reason for xen_panic_event() to be this last point in execution since panic()'s emergency_restart() will call into xen_emergency_restart() from where we can perform our hypercall. Nevertheless, we will provide xen_legacy_crash boot option that will preserve original behavior during crash. This option could be used, for example, if running kernel dumper (which happens after panic notifiers) is undesirable. Reported-by:
James Dingwall <james@dingwall.me.uk> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 88356d09 ] Commit ac7c3e4f ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. In cace of cmpxchg this would cause to reference function __cmpxchg_called_with_bad_pointer, which is a error case for catching bugs and will not happen for correct code, if __cmpxchg is inlined. Signed-off-by:
-
Dave Young authored
[ Upstream commit 2ecb7402 ] kexec reboot fails randomly in UEFI based KVM guest. The firmware just resets while calling efi_delete_dummy_variable(); Unfortunately I don't know how to debug the firmware, it is also possible a potential problem on real hardware as well although nobody reproduced it. The intention of the efi_delete_dummy_variable is to trigger garbage collection when entering virtual mode. But SetVirtualAddressMap can only run once for each physical reboot, thus kexec_enter_virtual_mode() is not necessarily a good place to clean a dummy object. Drop the efi_delete_dummy_variable so that kexec reboot can work. Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Matthew Garrett <mjg59@google.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott Talbert <swt@techie.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Link: https://lkml.kernel.org/r/20191002165904.8819-8-ard.biesheuvel@linaro.orgSigned-off-by:
-
Lukas Wunner authored
[ Upstream commit 6fb9367a ] The CPER parser assumes that the class code is big endian, but at least on this edk2-derived Intel Purley platform it's little endian: efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843 DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017 {1}[Hardware Error]: device_id: 0000:5d:00.0 {1}[Hardware Error]: slot: 0 {1}[Hardware Error]: secondary_bus: 0x5e {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2030 {1}[Hardware Error]: class_code: 000406 ^^^^^^ (should be 060400) Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Adam Ford authored
[ Upstream commit 37e3ab00 ] When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL. Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.comSigned-off-by:
-
Austin Kim authored
[ Upstream commit dd19c106 ] After 'Initial git repository build' commit, 'mapping_table_ERRHRD' variable has not been used. So 'mapping_table_ERRHRD' const variable could be removed to mute below warning message: fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable] static const struct smb_to_posix_error mapping_table_ERRHRD[] = { ^ Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit fffa6af9 ] The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 47a7e5e9 ] Fix tty driver build on SPARC by not using __exitdata. It appears that SPARC does not support section .exit.data. Fixes these build errors: `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o Reported-by:
kbuild test robot <lkp@intel.com> Fixes: 06324664 ("format-security: move static strings to const") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/675e7bd9-955b-3ff3-1101-a973b58b5b75@infradead.orgSigned-off-by:
-
Christophe JAILLET authored
[ Upstream commit 6264dab6 ] 'exit' functions should be marked as __exit, not __init. Fixes: fc60a8b6 ("tty: serial: owl: Implement console driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041129.6978-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
James Morse authored
[ Upstream commit dd8a1f13 ] CPUs affected by Neoverse-N1 #1542419 may execute a stale instruction if it was recently modified. The affected sequence requires freshly written instructions to be executable before a branch to them is updated. There are very few places in the kernel that modify executable text, all but one come with sufficient synchronisation: * The module loader's flush_module_icache() calls flush_icache_range(), which does a kick_all_cpus_sync() * bpf_int_jit_compile() calls flush_icache_range(). * Kprobes calls aarch64_insn_patch_text(), which does its work in stop_machine(). * static keys and ftrace both patch between nops and branches to existing kernel code (not generated code). The affected sequence is the interaction between ftrace and modules. The module PLT is cleaned using __flush_icache_range() as the trampoline shouldn't be executable until we update the branch to it. Drop the double-underscore so that this path runs kick_all_cpus_sync() too. Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
-
ZhangXiaoxu authored
[ Upstream commit 33ea5aaa ] When xfstests testing, there are some WARNING as below: WARNING: CPU: 0 PID: 6235 at fs/nfs/inode.c:122 nfs_clear_inode+0x9c/0xd8 Modules linked in: CPU: 0 PID: 6235 Comm: umount.nfs Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO) pc : nfs_clear_inode+0x9c/0xd8 lr : nfs_evict_inode+0x60/0x78 sp : fffffc000f68fc00 x29: fffffc000f68fc00 x28: fffffe00c53155c0 x27: fffffe00c5315000 x26: fffffc0009a63748 x25: fffffc000f68fd18 x24: fffffc000bfaaf40 x23: fffffc000936d3c0 x22: fffffe00c4ff5e20 x21: fffffc000bfaaf40 x20: fffffe00c4ff5d10 x19: fffffc000c056000 x18: 000000000000003c x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000040 x14: 0000000000000228 x13: fffffc000c3a2000 x12: 0000000000000045 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : fffffc00084b027c x5 : fffffc0009a64000 x4 : fffffe00c0e77400 x3 : fffffc000c0563a8 x2 : fffffffffffffffb x1 : 000000000000764e x0 : 0000000000000001 Call trace: nfs_clear_inode+0x9c/0xd8 nfs_evict_inode+0x60/0x78 evict+0x108/0x380 dispose_list+0x70/0xa0 evict_inodes+0x194/0x210 generic_shutdown_super+0xb0/0x220 nfs_kill_super+0x40/0x88 deactivate_locked_super+0xb4/0x120 deactivate_super+0x144/0x160 cleanup_mnt+0x98/0x148 __cleanup_mnt+0x38/0x50 task_work_run+0x114/0x160 do_notify_resume+0x2f8/0x308 work_pending+0x8/0x14 The nrequest should be increased/decreased only if PG_INODE_REF flag was setted. But in the nfs_inode_remove_request function, it maybe decrease when no PG_INODE_REF flag, this maybe lead nrequests count error. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
