Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which
already have them.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Save a bit of code by using the kernel extension.

$ size net/core/net-procfs.o*
   text	   data	    bss	    dec	    hex	filename
   3701	    120	      0	   3821	    eed	net/core/net-procfs.o.new
   3764	    120	      0	   3884	    f2c	net/core/net-procfs.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If any errors are encountered while walking the device tree structure of
the MDIO bus for children, the code may silently continue, silently
exit, or throw an error and exit.  This make it difficult for device
tree writers to know there is an error.  Also, it makes any error in a
child entry of the MDIO bus be fatal for all entries.  Instead, we
should provide verbose errors describing the error and then attempt to
continue if it all possible.  Also, use of_mdio_parse_addr()
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
net: add support for dissection and matching on ip tos and ttl

The 1st two patches enable matching/classifying on ip tos and ttl by
the flow dissector and flower. The other two patches offload matching
on tcp flags and ip tos in mlx5.

The mlx5 patches touch single file/function and not interfere with
other inflight mlx5 submissions.

V2:  repost as asked by Dave.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable offloading of TC matching on ipv4 tos or ipv6 traffic-class.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable offloading of TC matching on tcp flags.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Benefit from the support of ip header fields dissection and
allow users to set rules matching on ipv4 tos and ttl or
ipv6 traffic-class and hoplimit.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for dissection of ip tos and ttl and ipv6 traffic-class
and hoplimit. Both are dissected into the same struct.

Uses similar call to ip dissection function as with tcp, arp and others.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__pskb_trim_head() does not need to reset skb tail pointer.

Also change the comments, __pskb_pull_head() does not exist.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently loading a cgroup skb eBPF program require a CAP_SYS_ADMIN
capability while attaching the program to a cgroup only requires the
user have CAP_NET_ADMIN privilege. We can escape the capability
check when load the program just like socket filter program to make
the capability requirement consistent.

Change since v1:
Change the code style in order to be compliant with checkpatch.pl
preference
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows cgroup eBPF program to classify packet based on their
protocol or other detail information. Currently program need
CAP_NET_ADMIN privilege to attach a cgroup eBPF program, and A
process with CAP_NET_ADMIN can already see all packets on the system,
for example, by creating an iptables rules that causes the packet to
be passed to userspace via NFLOG.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

use of_mdio_parse_addr() in place of an OF read of reg and a bounds
check (which is litterally the exact same thing that
of_mdio_parse_addr() does)
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when a data packet is retransmitted, we do not compute an
RTT sample for congestion control due to Kern's check. Therefore the
congestion control that uses RTT signals may not receive any update
during loss recovery which could last many round trips. For example,
BBR and Vegas may not be able to update its min RTT estimation if the
network path has shortened until it recovers from losses. This patch
mitigates that by using TCP timestamp options for RTT measurement
for congestion control. Note that we already use timestamps for
RTT estimation.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set initialization state variable to (reflect interrupt initialization) at
correct time (immediately after having configured interrupts).  This fixes
problem of inconsistent IRQ allocation in case of [obscure] failure when
negotiating with PF driver during init.

Clean-up of interrupt enablement during initialization & avoid potential
race condition with chip-specific code (i.e. perform interrupt control in
main driver module).  Added explanatory comments regarding interrupt
enablement.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

take care of UpDbgLaRdPtr[0-3] restriction for T6.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: improve asoc streams management

This patchset changes to define asoc->stream as an object, and also
improve some codes to make it more clearly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since last patch, sctp doesn't need to alloc memory for asoc->stream any
more. sctp_stream_new and sctp_stream_init both are used to alloc memory
for stream.in or stream.out, and their names are also confusing.

This patch is to merge them into sctp_stream_init, and only pass stream
and streamcnt parameters into it, instead of the whole asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Marcelo's suggestion, stream is a fixed size member of asoc and would
not grow with more streams. To avoid an allocation for it, this patch is
to define it as an object instead of pointer and update the places using
it, also create sctp_stream_update() called in sctp_assoc_update() to
migrate the stream info from one stream to another.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-06-01

This series contains updates to i40e, i40evf and the "new" AVF virtchnl.

This is the introduction of the Intel(R) Ethernet Adaptive Virtual
Function driver code and device ID, as presented at the NetDEV 1.2
conference in 2016.
http://netdevconf.org/1.2/session.html?anjali-singhai

The idea is to convert the interface between the i40evf driver
and the parent i40e PF driver to be generic, as the i40evf driver
should in the future be able to run on top of other Intel PF
drivers, and negotiate any features beyond a "base expected" set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
qed: Enhance storage APIs

This series is intended to add additional information and features
to the API between qed and its storage protocol drivers [qedi, qedf].

Patch #2 adds some information stored on device such as wwpn & wwnn
to allow qedf utilize it; #1 fixes an issue with the reading of those
values [which were unused until now].

Patch #3 would allow the protocol drivers access to images on persistent
storage which is a prerequirement for adding boot from SAN support.

Patch #4 adds infrastrucutre to a future feature for qedi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enhance API between qedi and qed, allowing qedi to inform device's
firmware when the iSCSI mac is to be changed.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Storage drivers require images from the nvram in boot-from-SAN
scenarios. This provides the necessary API between qed and the
protocol drivers to perform such reads.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Share several new tidbits with qedf:
 - wwpn & wwnn
 - Absolute pf-id [this one is actually meant for qedi as well]
 - Number of available CQs

While we're at it, now that qedf will be aware of the available CQs
we can add some validation on the inputs it provides.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver reads values via HSI splitting this 8-byte into 2 32-bit
values and builds a single u64 field - but it does so by shifting
the lower field instead of the higher.
Luckily, we still don't use these fields for anything - but we're about
to start.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new macro MODULE_ALIAS_TEAM_MODE to unify and simplify the
declaration of team mode alias.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: tagger simplification

This series clarifies the hot path, removes the labels in tagging
implementations, and frees the original SKB in the xmit caller.

Changes in v3:
  - drop removal of usused rcv arguments because they will be used later
  - include the new ksz tagging implementation
  - add reviewers' tags

Changes in v2:
  - do not remove tagger function copies
  - document hot path requirements
  - make netdev_uses_dsa simpler
  - add reviewers' tags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As of a86d8bec ("net: dsa: Factor bottom tag receive functions"),
the rcv caller frees the original SKB in case or error.

Be symmetric with that and make the xmit caller do the same.

At the same time, fix the checkpatch NULL comparison check:

        CHECK: Comparison to NULL could be written "!nskb"
    #208: FILE: net/dsa/tag_trailer.c:35:
    +	if (nskb == NULL)
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many rcv functions from net/dsa/tag_*.c have a useless out_drop goto
label which simply returns NULL. Kill it in favor of the obvious.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since dev->dsa_ptr is a pointer to a dsa_switch_tree, there is no need
to have another inline helper just to check rcv.

Remove dsa_uses_tagged_protocol and check dsa_ptr && dsa_ptr->rcv
together at the same time.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dsa_ptr is not a void pointer anymore since Nov 2011, as of cf50dcc2
("dsa: Change dsa_uses_{dsa, trailer}_tags() into inline functions"),
but an explicit dsa_switch_tree pointer, thus remove the (void *) cast.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DSA layer uses inline helpers and copy of the tagging functions for
faster access in hot path. Add comments to detail that.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The addition of the AVF and virtchnl code to the i40evf driver
means we should update the i40evf.txt file with the most up to date
information.

It seems this file hasn't been updated in a while, so the
changes cover a little more than just AVF, but it's all only
in the i40evf.txt.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add device ID define and mac_type assignment needed for
Adaptive Virtual Function (VF Base Mode Support).

Also, update version to v3.0.0 in order to indicate
clearly that this is the first driver supporting the AVF
device ID.
Signed-off-by: Preethi Banala <preethi.banala@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This uses preprocessor tricks to make sure that a divide by zero
occurs if a struct changes size outside the expected number of
bytes.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This removes holes and makes structure sizes consistent across
32 and 64 bit builds.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This moves a function that is needed for the virtchnl interface
from the i40e PF driver over to the virtchnl.h file.

It was manually verified that the function in question is unchanged
except for the function name and function header, which explains
the slight difference in the number of lines removed/added.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch implements the complete version of the virtchnl.h file
with final renames, and fixes the related code in i40e and i40evf.

It also expands comments, and adds details on the usage of
certain fields.

In addition, due to the changes a couple of casts are needed
to prevent errors found by sparse after renaming some fields.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>