- 01 Oct, 2015 22 commits
-
-
Sakari Ailus authored
commit 9d39f054 upstream. Commit 813f5c0a ("media: Change media device link_notify behaviour") modified the media controller link setup notification API and updated the OMAP3 ISP driver accordingly. As a side effect it introduced a bug by turning power on after setting the link instead of before. This results in sub-devices not being powered down in some cases when they should be. Fix it. Fixes: 813f5c0a [media] media: Change media device link_notify behaviour Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Härdeman authored
commit a66b0c41 upstream. The input_dev is already gone when the rc device is being unregistered so checking for its presence only means that no remove uevent will be generated. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Minfei Huang authored
commit 9962eea9 upstream. The variable pmd_idx is not initialized for the first iteration of the for loop. Assign the proper value which indexes the start address. Fixes: 719272c4 'x86, mm: only call early_ioremap_page_table_range_init() once' Signed-off-by:
Minfei Huang <mnfhuang@gmail.com> Cc: tony.luck@intel.com Cc: wangnan0@huawei.com Cc: david.vrabel@citrix.com Reviewed-by: yinghai@kernel.org Link: http://lkml.kernel.org/r/1436703522-29552-1-git-send-email-mhuang@redhat.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Yinghai Lu authored
commit 04697858 upstream. Tony Luck found on his setup, if memory block size 512M will cause crash during booting. BUG: unable to handle kernel paging request at ffffea0074000020 IP: get_nid_for_pfn+0x17/0x40 PGD 128ffcb067 PUD 128ffc9067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1 ... Call Trace: ? register_mem_sect_under_node+0x66/0xe0 register_one_node+0x17b/0x240 ? pci_iommu_alloc+0x6e/0x6e topology_init+0x3c/0x95 do_one_initcall+0xcd/0x1f0 The system has non continuous RAM address: BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable So there are start sections in memory block not present. For example: memory block : [0x2c18000000, 0x2c20000000) 512M first three sections are not present. The current register_mem_sect_under_node() assume first section is present, but memory block section number range [start_section_nr, end_section_nr] would include not present section. For arch that support vmemmap, we don't setup memmap for struct page area within not present sections area. So skip the pfn range that belong to absent section. [akpm@linux-foundation.org: simplification] [rientjes@google.com: more simplification] Fixes: bdee237c ("x86: mm: Use 2GB memory block size on large memory x86-64 systems") Fixes: 982792c7 ("x86, mm: probe memory block size for generic x86 64bit") Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Tony Luck <tony.luck@intel.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jeffery Miller authored
commit 09bfda10 upstream. With the radeon driver loaded the HP Compaq dc5750 Small Form Factor machine fails to resume from suspend. Adding a quirk similar to other devices avoids the problem and the system resumes properly. Signed-off-by:
Jeffery Miller <jmiller@neverware.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jann Horn authored
commit 4c17a6d5 upstream. This might lead to local privilege escalation (code execution as kernel) for systems where the following conditions are met: - CONFIG_CIFS_SMB2 and CONFIG_CIFS_POSIX are enabled - a cifs filesystem is mounted where: - the mount option "vers" was used and set to a value >=2.0 - the attacker has write access to at least one file on the filesystem To attack this, an attacker would have to guess the target_tcon pointer (but guessing wrong doesn't cause a crash, it just returns an error code) and win a narrow race. Signed-off-by:
Jann Horn <jann@thejh.net> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 36b35d5d upstream. If we had secondary hash flag set, we ended up modifying hash value in the updatepp code path. Hence with a failed updatepp we will be using a wrong hash value for the following hash insert. Fix this by recomputing hash before insert. Without this patch we can end up with using wrong slot number in linux pte. That can result in us missing an hash pte update or invalidate which can cause memory corruption or even machine check. Fixes: 6d492ecc ("powerpc/THP: Add code to handle HPTE faults for hugepages") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Thomas Huth authored
commit 1c2cb594 upstream. The EPOW interrupt handler uses rtas_get_sensor(), which in turn uses rtas_busy_delay() to wait for RTAS becoming ready in case it is necessary. But rtas_busy_delay() is annotated with might_sleep() and thus may not be used by interrupts handlers like the EPOW handler! This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6 Call Trace: [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable) [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180 Fix this issue by introducing a new rtas_get_sensor_fast() function that does not use rtas_busy_delay() - and thus can only be used for sensors that do not cause a BUSY condition - known as "fast" sensors. The EPOW sensor is defined to be "fast" in sPAPR - mpe. Fixes: 587f83e8 ("powerpc/pseries: Use rtas_get_sensor in RAS code") Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
commit 74b5037b upstream. The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K PAGE_SIZE. However when built with a 4K PAGE_SIZE there is an additional config option which can be enabled, PPC_HAS_HASH_64K, which means the kernel also knows how to hash a 64K page even though the base PAGE_SIZE is 4K. This is used in one obscure configuration, to support 64K pages for SPU local store on the Cell processor when the rest of the kernel is using 4K pages. In this configuration, pte_pagesize_index() is defined to just pass through its arguments to get_slice_psize(). However pte_pagesize_index() is called for both user and kernel addresses, whereas get_slice_psize() only knows how to handle user addresses. This has been broken forever, however until recently it happened to work. That was because in get_slice_psize() the large kernel address would cause the right shift of the slice mask to return zero. However in commit 7aa0727f ("powerpc/mm: Increase the slice range to 64TB"), the get_slice_psize() code was changed so that instead of a right shift we do an array lookup based on the address. When passed a kernel address this means we index way off the end of the slice array and return random junk. That is only fatal if we happen to hit something non-zero, but when we do return a non-zero value we confuse the MMU code and eventually cause a check stop. This fix is ugly, but simple. When we're called for a kernel address we return 4K, which is always correct in this configuration, otherwise we use the slice mask. Fixes: 7aa0727f ("powerpc/mm: Increase the slice range to 64TB") Reported-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit a161574e upstream. It turned out that the machine has a bass speaker, so take a correct fixup entry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit bb148bde upstream. According to the bug report, FSC Amilo laptops with ALC880 can detect the headphone jack but currently the driver disables it. It's partly intentionally, as non-working jack detect was reported in the past. Let's enable now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501Signed-off-by:
-
Takashi Iwai authored
commit eb38f3a4 upstream. We've got bug reports showing the old systemd-logind (at least system-210) aborting unexpectedly, and this turned out to be because of an invalid error code from close() call to evdev devices. close() is supposed to return only either EINTR or EBADFD, while the device returned ENODEV. logind was overreacting to it and decided to kill itself when an unexpected error code was received. What a tragedy. The bad error code comes from flush fops, and actually evdev_flush() returns ENODEV when device is disconnected or client's access to it is revoked. But in these cases the fact that flush did not actually happen is not an error, but rather normal behavior. For non-disconnected devices result of flush is also not that interesting as there is no potential of data loss and even if it fails application has no way of handling the error. Because of that we are better off always returning success from evdev_flush(). Also returning EINTR from flush()/close() is discouraged (as it is not clear how application should handle this error), so let's stop taking evdev->mutex interruptibly. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Marc Zyngier authored
commit c4cbba9f upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit df057cc7 upstream. Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can lead to a memory access using an incorrect address in certain sequences headed by an ADRP instruction. There is a linker fix to generate veneers for ADRP instructions, but this doesn't work for kernel modules which are built as unlinked ELF objects. This patch adds a new config option for the erratum which, when enabled, builds kernel modules with the mcmodel=large flag. This uses absolute addressing for all kernel symbols, thereby removing the use of ADRP as a PC-relative form of addressing. The ADRP relocs are removed from the module loader so that we fail to load any potentially affected modules. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit d10bcd47 upstream. When entering the kernel at EL2, we fail to initialise the MDCR_EL2 register which controls debug access and PMU capabilities at EL1. This patch ensures that the register is initialised so that all traps are disabled and all the PMU counters are available to the host. When a guest is scheduled, KVM takes care to configure trapping appropriately. Acked-by:
-
Will Deacon authored
commit bdec97a8 upstream. When saving/restoring the VFP registers from a compat (AArch32) signal frame, we rely on the compat registers forming a prefix of the native register file and therefore make use of copy_{to,from}_user to transfer between the native fpsimd_state and the compat_vfp_sigframe. Unfortunately, this doesn't work so well in a big-endian environment. Our fpsimd save/restore code operates directly on 128-bit quantities (Q registers) whereas the compat_vfp_sigframe represents the registers as an array of 64-bit (D) registers. The architecture packs the compat D registers into the Q registers, with the least significant bytes holding the lower register. Consequently, we need to swap the 64-bit halves when converting between these two representations on a big-endian machine. This patch replaces the __copy_{to,from}_user invocations in our compat VFP signal handling code with explicit __put_user loops that operate on 64-bit values and swap them accordingly. Reviewed-by:
-
Jeff Vander Stoep authored
commit bf0c4e04 upstream. Move the poison pointer offset to 0xdead000000000000, a recognized value that is not mappable by user-space exploits. Acked-by:
Thierry Strudel <tstrudel@google.com> Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Signed-off-by:
-
Bob Copeland authored
commit 3633ebeb upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by:
Alexis Green <agreen@cococorp.com> Tested-by:
Jesse Jones <jjones@cococorp.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jean Delvare authored
commit d3d11fe0 upstream. The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0b ("tg3: Add hwmon support for temperature") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrien Schildknecht authored
commit 1642d09f upstream. The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by:
Adrien Schildknecht <adrien+dev@schischi.me> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric W. Biederman authored
commit 12c641ab upstream. In the logic in the initial commit of unshare made creating a new thread group for a process, contingent upon creating a new memory address space for that process. That is wrong. Two separate processes in different thread groups can share a memory address space and clone allows creation of such proceses. This is significant because it was observed that mm_users > 1 does not mean that a process is multi-threaded, as reading /proc/PID/maps temporarily increments mm_users, which allows other processes to (accidentally) interfere with unshare() calls. Correct the check in check_unshare_flags() to test for !thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM. For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM. For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM. By using the correct checks in unshare this removes the possibility of an accidental denial of service attack. Additionally using the correct checks in unshare ensures that only an explicit unshare(CLONE_VM) can possibly trigger the slow path of current_is_single_threaded(). As an explict unshare(CLONE_VM) is pointless it is not expected there are many applications that make that call. Fixes: b2e0d987 userns: Implement unshare of the user namespace Reported-by:
Ricky Zhou <rickyz@chromium.org> Reported-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Ming Lei authored
commit 596f5aad upstream. There may be lots of pending requests so that the buffer of PAGE_SIZE can't hold them at all. One typical example is scsi-mq, the queue depth(.can_queue) of scsi_host and blk-mq is quite big but scsi_device's queue_depth is a bit small(.cmd_per_lun), then it is quite easy to have lots of pending requests in hw queue. This patch fixes the following warning and the related memory destruction. [ 359.025101] fill_read_buffer: blk_mq_hw_sysfs_show+0x0/0x7d returned bad count^M [ 359.055595] irq event stamp: 15537^M [ 359.055606] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M [ 359.055614] Dumping ftrace buffer:^M [ 359.055660] (ftrace buffer empty)^M [ 359.055672] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M [ 359.055678] CPU: 4 PID: 21631 Comm: stress-ng-sysfs Not tainted 4.2.0-rc5-next-20150805 #434^M [ 359.055679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M [ 359.055682] task: ffff8802161cc000 ti: ffff88021b4a8000 task.ti: ffff88021b4a8000^M [ 359.055693] RIP: 0010:[<ffffffff811541c5>] [<ffffffff811541c5>] __kmalloc+0xe8/0x152^M Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
- 21 Sep, 2015 18 commits
-
-
Greg Kroah-Hartman authored
-
Imre Deak authored
commit 9e326f78 upstream. We can call this function for a dummy console that doesn't support setting the font mapping, which will result in a null ptr BUG. So check for this case and return error for consoles w/o font mapping support. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Mikulas Patocka authored
commit f49a26e7 upstream. Update ctime and mtime when a directory is modified. (though OS/2 doesn't update them anyway) Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Grant Likely authored
commit 7f5dcaf1 upstream. The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Tested-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Vignesh R authored
commit b9e23f32 upstream. Legacy IPs like PWMSS, present under l4per2_7xx_clkdm, cannot support smart-idle when its clock domain is in HW_AUTO on DRA7 SoCs. Hence, program clock domain to SW_WKUP. Signed-off-by:
Vignesh R <vigneshr@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
David Daney authored
commit 3a496b00 upstream. If the internal call to of_address_to_resource() fails, we end up looping forever in of_find_matching_node_by_address(). This can be caused by a defective device tree, or calling with an incorrect matches argument. Fix by calling of_find_matching_node() unconditionally at the end of the loop. Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
Sudip Mukherjee authored
commit bab383de upstream. parport_find_base() will implicitly do parport_get_port() which increases the refcount. Then parport_register_device() will again increment the refcount. But while unloading the module we are only doing parport_unregister_device() decrementing the refcount only once. We add an parport_put_port() to neutralize the effect of parport_get_port(). Signed-off-by:
-
Peter Chen authored
commit 4bc58eb1 upstream. Fix the name of attribute Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Peter Chen authored
commit 8cd50626 upstream. Fix the name of attribute Signed-off-by:
-
Masahiro Yamada authored
commit 64526370 upstream. Currently, devres_get() passes devres_free() the pointer to devres, but devres_free() should be given with the pointer to resource data. Fixes: 9ac7849e ("devres: device resource management") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Max Filippov authored
commit 77d6273e upstream. call12 can't be safely used as the first call in the inline function, because the compiler does not extend the stack frame of the bounding function accordingly, which may result in corruption of local variables. If a call needs to be done, do call8 first followed by call12. For pure assembly code in _switch_to increase stack frame size of the bounding function. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
commit 4229fb12 upstream. Userspace return code may skip restoring THREADPTR register if there are no registers that need to be zeroed. This leads to spurious failures in libc NPTL tests. Always restore THREADPTR on return to userspace. Signed-off-by:
-
Xiao Guangrong authored
commit 6f691251 upstream. We got the bug that qemu complained with "KVM: unknown exit, hardware reason 31" and KVM shown these info: [84245.284948] EPT: Misconfiguration. [84245.285056] EPT: GPA: 0xfeda848 [84245.285154] ept_misconfig_inspect_spte: spte 0x5eaef50107 level 4 [84245.285344] ept_misconfig_inspect_spte: spte 0x5f5fadc107 level 3 [84245.285532] ept_misconfig_inspect_spte: spte 0x5141d18107 level 2 [84245.285723] ept_misconfig_inspect_spte: spte 0x52e40dad77 level 1 This is because we got a mmio #PF and the handler see the mmio spte becomes normal (points to the ram page) However, this is valid after introducing fast mmio spte invalidation which increases the generation-number instead of zapping mmio sptes, a example is as follows: 1. QEMU drops mmio region by adding a new memslot 2. invalidate all mmio sptes 3. VCPU 0 VCPU 1 access the invalid mmio spte access the region originally was MMIO before set the spte to the normal ram map mmio #PF check the spte and see it becomes normal ram mapping !!! This patch fixes the bug just by dropping the check in mmio handler, it's good for backport. Full check will be introduced in later patches Reported-by:
Pavel Shirshov <ru.pchel@gmail.com> Tested-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Don Zickus authored
commit 3af4e5a9 upstream. It was reported that after 10-20 reboots, a usb keyboard plugged into a docking station would not work unless it was replugged in. Using usbmon, it turns out the interrupt URBs were streaming with callback errors of -71 for some reason. The hid-core.c::hid_io_error was supposed to retry and then reset, but the reset wasn't really happening. The check for HID_NO_BANDWIDTH was inverted. Fix was simple. Tested by reporter and locally by me by unplugging a keyboard halfway until I could recreate a stream of errors but no disconnect. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andrey Ryabinin authored
commit 71c6da84 upstream. Currently context size (cra_ctxsize) doesn't specified for ghash_async_alg. Which means it's zero. Thus crypto_create_tfm() doesn't allocate needed space for ghash_async_ctx, so any read/write to ctx (e.g. in ghash_async_init_tfm()) is not valid. Signed-off-by:
Andrey Ryabinin <aryabinin@odin.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Maciej S. Szmigiero authored
commit ffa34de0 upstream. SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by:
Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
-
Peter Chen authored
commit 0521cfd0 upstream. The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit b2fb5b1a upstream. DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and the size of bounce buffer is 512 bytes. However if the host initiates OUT transfers of size more than 512 bytes (and non max packet aligned), the driver throws a WARN dump but still programs the TRB to receive more than 512 bytes. This will cause bounce buffer to overflow and corrupt the adjacent memory locations which can be fatal. Fix it by programming the TRB to receive a maximum of DWC3_EP0_BOUNCE_SIZE (512) bytes. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
