- 26 Jul, 2018 2 commits
-
-
Brian Foster authored
xlog_finish_defer_ops() processes the deferred operations collected over the entire intent recovery sequence. We can't xfs_defer_init() here because the dfops is already populated. Attach it manually and eliminate the last caller of xfs_defer_finish() that doesn't pass ->t_dfops. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Brian Foster authored
xfs_itruncate_extents[_flags]() uses a local dfops with a transaction provided by the caller. It uses hacky ->t_dfops replacement logic to avoid stomping over an already populated ->t_dfops. The latter never occurs for current callers and the logic itself is not really appropriate. Clean this up by updating all callers to initialize a dfops and to use that down in xfs_itruncate_extents(). This more closely resembles the upcoming logic where dfops will be embedded within the transaction. We can also replace the xfs_defer_init() in the xfs_itruncate_extents_flags() loop with an assert. Both dfops and firstblock should be in a valid state after xfs_defer_finish() and the inode joined to the dfops is fixed throughout the loop. Signed-off-by:
-
- 23 Jul, 2018 11 commits
-
-
Darrick J. Wong authored
Use the "bad summary count" mount flag from the previous patch to skip writing the unmount record to force log recovery at the next mount, which will recalculate the summary counters for us. Signed-off-by:
-
Darrick J. Wong authored
Refactor the writing of the unmount record into a separate helper. No functionality changes. Signed-off-by:
-
Darrick J. Wong authored
Filippo Giunchedi complained that xfs doesn't even perform basic sanity checks of the fs summary counters at mount time. Therefore, recalculate the summary counters from the AGFs after log recovery if the counts were bad (or we had to recover the fs). Enhance the recalculation routine to fail the mount entirely if the new values are also obviously incorrect. We use a mount state flag to record the "bad summary count" state so that the (subsequent) online fsck patches can detect subtlely incorrect counts and set the flag; clear it userspace asks for a repair; or force a recalculation at the next mount if nobody fixes it by unmount time. Reported-by:
Filippo Giunchedi <fgiunchedi@wikimedia.org> Signed-off-by:
-
Darrick J. Wong authored
Now that we've shortened everything, fix up all the indentation and whitespace problems. There are no functional changes. Signed-off-by:
-
Darrick J. Wong authored
Shorten the name of the online fsck context structure. Whitespace damage will be fixed by a subsequent patch. There are no functional changes. Signed-off-by:
-
Darrick J. Wong authored
Shorten all the metadata repair xfs_repair_* symbols to xrep_. Whitespace damage will be fixed by a subsequent patch. There are no functional changes. Signed-off-by:
-
Darrick J. Wong authored
Shorten all the metadata checking xfs_scrub_ prefixes to xchk_. After this, the only xfs_scrub* symbols are the ones that pertain to both scrub and repair. Whitespace damage will be fixed in a subsequent patch. There are no functional changes. Signed-off-by:
-
Darrick J. Wong authored
Less trivial cleanups of the error argument to xfs_btree_del_cursor; these require some minor code refactoring. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
The error argument to xfs_btree_del_cursor already understands the "nonzero for error" semantics, so remove pointless error testing in the callers and pass it directly. Signed-off-by:
-
Darrick J. Wong authored
The following assertion was seen on generic/051: XFS: Assertion failed: tp->t_firstblock == NULLFSBLOCK, file: fs/xfs/libxfs5 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 20757 Comm: fsstress Not tainted 4.18.0-rc4+ #3969 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/4 RIP: 0010:assfail+0x23/0x30 Code: c3 66 0f 1f 44 00 00 48 89 f1 41 89 d0 48 c7 c6 88 e0 8c 82 48 89 fa RSP: 0018:ffff88012dc43c08 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88012dc43ca0 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff828480eb RBP: ffff88012aa92758 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: f000000000000000 R12: 0000000000000000 R13: ffff88012dc43d48 R14: ffff88013092e7e8 R15: 0000000000000014 FS: 00007f8d689b8e80(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8d689c7000 CR3: 000000012ba6a000 CR4: 00000000000006e0 Call Trace: xfs_defer_init+0xff/0x160 xfs_reflink_remap_extent+0x31b/0xa00 xfs_reflink_remap_blocks+0xec/0x4a0 xfs_reflink_remap_range+0x3a1/0x650 xfs_file_dedupe_range+0x39/0x50 vfs_dedupe_file_range+0x218/0x260 do_vfs_ioctl+0x262/0x6a0 ? __se_sys_newfstat+0x3c/0x60 ksys_ioctl+0x35/0x60 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x4b/0x190 entry_SYSCALL_64_after_hwframe+0x49/0xbe The root cause of the assertion failure is that xfs_defer_finish doesn't roll the transaction after processing all the deferred items. Therefore it returns a dirty transaction to the caller, which leaves the caller at risk of exceeding the transaction reservation if it logs more items. Brian Foster's patchset to move the defer_ops firstblock into the transaction requires t_firstblock == NULLFSBLOCK upon defer_ops initialization, which is how this was noticed at all. Reported-by:
-
Darrick J. Wong authored
Check the leaf attribute freemap when we're verifying the block. Signed-off-by:
-
- 17 Jul, 2018 5 commits
-
-
Carlos Maiolino authored
No significant changes, just silence a couple of sparse errors. Using cpu_to_be32(NULLAGINO), the NULLAGINO constant will be encoded in BE as a constant, avoiding a BE -> CPU conversion every iteraction of the loop, if be32_to_cpu(agi->agi_unlinked[i]) was used instead. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the swap macro and remove unnecessary variable *tmp*. This makes the code easier to read and maintain. Also, slightly refactor some code. This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
Gustavo A. R. Silva authored
Make use of the swap macro and remove some unnecessary variables. This makes the code easier to read and maintain. Also, reduces the stack usage. This code was detected with the help of Coccinelle. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the swap macro and remove some unnecessary variables. This makes the code easier to read and maintain. Also, reduces the stack usage. This code was detected with the help of Coccinelle. Signed-off-by:
-
Darrick J. Wong authored
The original rmap code assumed that there would always be at least one rmap in the rmapbt (the AG sb/agf/agi) and so errored out if it didn't find one. This assumption isn't true for the rmapbt repair function (and it won't be true for realtime rmap either), so remove the check and just deal with the situation. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com>
-
- 12 Jul, 2018 22 commits
-
-
Carlos Maiolino authored
Make sure we initialize *bno and *len, before jumping to out_bad_rec label, and risk calling xfs_warn() with uninitialized variables. Coverity: 100898 Coverity: 1437081 Coverity: 1437129 Coverity: 1437191 Coverity: 1437201 Coverity: 1437212 Coverity: 1437341 Signed-off-by:
-
Eric Sandeen authored
Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Brian Foster authored
Now that there is only one caller, fold the common submission helper into __xfs_buf_submit(). Suggested-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Brian Foster authored
The buffer I/O submission path consists of separate function calls per type. The buffer I/O type is already controlled via buffer state (XBF_ASYNC), however, so there is no real need for separate submission functions. Combine the buffer submission functions into a single function that processes the buffer appropriately based on XBF_ASYNC. Retain an internal helper with a conditional wait parameter to continue to support batched !XBF_ASYNC submission/completion required by delwri queues. Suggested-by:
-
Brian Foster authored
If a delwri queue occurs of a buffer that sits on a delwri queue wait list, the queue sets _XBF_DELWRI_Q without changing the state of ->b_list. This occurs, for example, if another thread beats the current delwri waiter thread to the buffer lock after I/O completion. Once the waiter acquires the lock, it removes the buffer from the wait list and leaves a buffer with _XBF_DELWRI_Q set but not populated on a list. This results in a lost buffer submission and in turn can result in assert failures due to _XBF_DELWRI_Q being set on buffer reclaim or filesystem lockups if the buffer happens to cover an item in the AIL. This problem has been reproduced by repeated iterations of xfs/305 on high CPU count (28xcpu) systems with limited memory (~1GB). Dirty dquot reclaim races with an xfsaild push of a separate dquot backed by the same buffer such that the buffer sits on the reclaim wait list at the time xfsaild attempts to queue it. Since the latter dquot has been flush locked but the underlying buffer not submitted for I/O, the dquot pins the AIL and causes the filesystem to livelock. This race is essentially made possible by the buffer lock cycle involved with waiting on a synchronous delwri queue submission. Close the race by using synchronous buffer I/O for respective delwri queue submission. This means the buffer remains locked across the I/O and so is inaccessible from other contexts while in the intermediate wait list state. The sync buffer I/O wait mechanism is factored into a helper such that sync delwri buffer submission and serialization are batched operations. Designed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Brian Foster authored
Sync and async buffer submission both do generally similar things with a couple odd exceptions. Refactor the core buffer submission code into a common helper to isolate buffer submission from completion handling of synchronous buffer I/O. This patch does not change behavior. It is a step towards support for using synchronous buffer I/O via synchronous delwri queue submission. Designed-by:
-
Brian Foster authored
All but one caller of xfs_defer_init() passes in the ->t_firstblock of the associated transaction. The one outlier is xlog_recover_process_intents(), which simply passes a dummy value because a valid pointer is required. This firstblock variable can simply be removed. At this point we could remove the xfs_defer_init() firstblock parameter and initialize ->t_firstblock directly. Even that is not necessary, however, because ->t_firstblock is automatically reinitialized in the new transaction on a transaction roll. Since xfs_defer_init() should never occur more than once on a particular transaction (since the corresponding finish will roll it), replace the reinit from xfs_defer_init() with an assert that verifies the transaction has a NULLFSBLOCK firstblock. Signed-off-by:
-
Brian Foster authored
Signed-off-by:
-
Brian Foster authored
Signed-off-by:
-
Brian Foster authored
Signed-off-by:
-
Brian Foster authored
xfs_refcount_recover_cow_leftovers() has no need for a firstblock variable and so passes an unrelated xfs_fsblock_t to xfs_defer_init() to avoid declaring one. Replace this no-op initialization with ->t_firstblock. This will be optimized away by the removal of the xfs_defer_init() firstblock param. Signed-off-by:
-
Brian Foster authored
Signed-off-by:
-
Brian Foster authored
The xfs_alloc_arg.firstblock field is used to control the starting agno for an allocation. The structure already carries a pointer to the transaction, which carries the current firstblock value. Remove the field and access ->t_firstblock directly in the allocation code. Signed-off-by:
-
Brian Foster authored
The bmbt cursor private structure has a firstblock field that is used to maintain locking order on bmbt allocations. The field holds an actual firstblock value (as opposed to a pointer), so it is initialized on cursor creation, updated on allocation and then the value is transferred back to the source before the cursor is destroyed. This value is always transferred from and back to the ->t_firstblock field. Since xfs_btree_cur already carries a reference to the transaction, we can remove this field from xfs_btree_cur and the associated copying. The bmbt allocations will update the value in the transaction directly. Signed-off-by:
-
Brian Foster authored
The bmap format helpers receive firstblock via ->t_firstblock. Drop the param and access it directly. Signed-off-by:
-
Brian Foster authored
The add extent helpers all receive firstblock via ->t_firstblock. Drop the parameter and access it directly. Signed-off-by:
-
Brian Foster authored
The xfs_bmalloca.firstblock field carries the firstblock value from the transaction into the bmap infrastructure. It's initialized in one place from ->t_firstblock, so drop the field and access ->t_firstblock directly throughout the bmap code. Signed-off-by:
-
Brian Foster authored
Also remove the unnecessary xfs_bmap_split_extent_at() parameter. Signed-off-by:
-
Brian Foster authored
The only callers pass ->t_firstblock. Signed-off-by:
-
Brian Foster authored
All callers pass ->t_firstblock from the current transaction. Signed-off-by:
-
Brian Foster authored
All callers pass ->t_firstblock from the current transaction. Signed-off-by:
-
Brian Foster authored
Signed-off-by:
-
